Crop ratios with free orientation

Currently you can select crop ratios like 2x3, 3x4, etc or enter a custom value. This is great, but restricted to crop in the same orientation (i.e. landscape or portrait) as the original. If you want a 3x2 landscape crop from a 2x3 portrait original, this is not possible using the existing tool, other than by doing crop in freehand and getting it close to 2x3 by luck...
Other programs offer the ratios 2x3 and 3x2 as separate choices, which is one solution.

Please drag your corner off at an angle and the orientation flips automagically.

Similar Messages

Lost my crop settings with new catalogue.

I did have all my images in one catalogue but have now split them into a catalogue for each year. At the same time I created the new ones on a different disk drive to the images themselves as this seemed like a sensible thing to do and I have more free space on that disk.
Basically it went as I expected but in Develop I have now lost my user defined Crop ratios. As far as I can tell that is the only settings I have lost. Develope pre-sets and print sizes all seem to be there. I can soon put them back but just out of interest, can someone tell me where these settings are stored please. Also, I see my identity plate has gone. What else is catalogue specific, other than keywords which I know about?
Finally, is there anywhere to display the catalogue on screen?
Thanks,
Dave.

I should have added that I am using a PC with XP.
Also I know where the non-catalogue specific user settings are in C:\documants and settings\user\application data\adobe\lightroom\
Thanks,
Dave.

Flip the crop ratio in camera/photos app?

In the new photos app, does anyone know how to flip the crop ratio, change it from say 2:3 to 3:2? This used to be simple in iOS 7 and earlier, and it's a common feature of photo apps (iPhoto, Aperture, Pixelmator, etc.), but it seems to be missing from iOS 8.
Let's say you want to do a portrait crop from a landscape photo using a set ratio like 5 x 7. In iOS 8 there appears to be no way to do this easily. You can flip the photo, edit it while on its side (not a natural view which makes doing a nice crop more difficult), then flip the photo back to its proper orientation, but that's a lot of unnecessary steps.
Am I missing an easy way to do this?

Good day!
I notice no difference to prior to 8.4.
But maybe the ACR Forum may be a better place for questions realted to ACR.
http://forums.adobe.com/community/cameraraw
Regards,
Pfaffenbichler

Web gallery export bug: Crop ratio change doesn't update correctly

I've just submitted this as a bug to the Aperture feedback site, but then realized that maybe I should have asked around to find out if it was just me or if it's an actual bug.
Try this: Export a web gallery to your site. Now change the cropped aspect ratio of one or more images in the gallery. Now export the gallery again and when Aperture asks if you want to Update or Replace the existing gallery, select Update. (This option is supposed to save time by only sending the changed files to the site.) The image that was cropped differently will still show up in the Index and Detail view with the old ratio, but the new dimensions will be stretched to fit the old ratio.
I've done this repeatedly and it's completely reproducible. The only way to get the gallery to display correctly is to select Replace when exporting the gallery. Obviously, if your gallery is larger than a handful of images this will take a while and it defeats the purpose of the Update option.
Does anyone find this same issue or am I the only one?

Yeah, that makes sense.
I'm thinking now that if I create a new version in the web gallery and crop it just for the web export the app will probably re-send that image out to the web site because it treats the new version as a different image. Since the new version really doesn't take up any meaningful hard drive space this wouldn't be a deal-breaker, but I would have to remember to NOT delete that version or change the crop ratio before uploading the gallery again.

Bug in Crop tool with Olympus E-M5 raw files (ORF)

There is a bug in the crop tool with Olympus OM-D E-M5 RAW files (ORF) that is still not fixed with the recent update. Here is how to reproduce the problem.
I setup my E-M5 camera picture aspect ratio to 3:2 (instead of the sensor 4:3) and file format to RAW.
I take a picture.
I import the picture in Lightroom. The first thumbnail I see is the full sensor, then Lightroom computes a new thumbnail and correctly display the 3:2 crop factor.
I select the picture in the library and press [R] to bring the Crop tool.
BUG: The Crop tool does not let me recover the full 4:3 sensor image and is locked to the 3:2 crop factor.
Can this be fixed? Thanks

Are you sure you mean Photoshop version 6 the is a very old version of Photoshop before ACR existed. ACR first became available as a extra cost plug-in for Photoshop version 7. ACR started to be shipped with Photoshop with Photoshop CS. Each version since Photoshop CS has a newer version of ACR which is not compatible with older versions of Photoshop. So
CS ACR version is 2.4
CS2 ACR version 3.7
CS3 ACR version 4.6
CS4 ACR version 5.7
CS5 ACR version 6.7
CS6 and CC ACR version 8.4 however the new features in ACR 8.4 for CC are crippled in CS6. CS6 just get the new Camera support.
http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows
If you have CS6 use menu help>Updates it should find the ACR 8.4 for CS6 and update your installation. If it does not you can down load it and the DNG converter. However don't convert to DNG just use your OFR RAW files.
http://blogs.adobe.com/lightroomjournal/2014/04/camera-raw-8-4-and-dng-converter-8-4-now-a vailable.html
If you do mean Photoshop version 6 you need to see if Olympus has a RAW converter for Photoshop version 6 for your camera.

How do I change the print orientation for PDFs with mixed orientation pages?

I'm sure this is a fairly basic and easily solvable issue, but I've been searching for a solution and can't find one for the life of me.
The issue: I'm printing a PDF that will be bound book-style, and the file contains pages with mixed orientations (both portrait and landscape). When I print the file, the landscape pages point the wrong way, to the left of the spine, when they should be pointing down to the right of the spine. I've adjusted the print settings for multiple test rounds, and nothing seems to work. Here's a visualization of the problem (apologies for the bad Paint art):
What the book is doing now when it prints:
What I need it to do:
Here's the caveat: I cannot just rotate all the landscape pages counter-clockwise in Acrobat for ease of printing, because it would remove the ability to scroll through the file quickly in Reader or a Web browser, and the same file needs to be both easily readable digitally AND print correctly.
Is this adjustment a print setting? Is this a tool I'm overlooking within Acrobat? Is this outside the scope of what is adjustable? All advice is welcome, and please feel free to ask any follow-up questions if I explained my problem unclearly.

If you are trying booklet printing, try to rotate the pages as needed before you print to the booklet. If you are print booklets without using professional imposition software, then Quite Imposing or Quite Imposing Plus should be considered. I believe they offer a demo version.

Crop Ratio Camera Raw / Scott Kelby Book for Digital Photographers

From the Book of Scot Kelby regarding the Camera Raw usage.
- The Adobe® Photoshop® CS5 Book for Digital Photographers
Chapter 2. WWF Raw: The Essentials of Camera Raw > Cropping and Straightening
If you reopen your cropped photo again in Camera Raw, you’ll see the cropped version. To bring back the cropping border, just click on the Crop tool. To remove the cropping altogether, press the Esc or Delete (PC: Backspace) key on your keyboard (or choose Clear Crop from the Crop tool’s pop-up menu). If you want your photo cropped to an exact size (like 8×10″, 13×19″, etc.), choose Custom from the Crop tool’s pop-up menu to bring up the dialog you see here. You can choose to crop by inches, pixels, or centimeters.
In this topic Scott Kelby is explaining Crop Ratio for ACR 7.x
In this version there is the possibility for Crop Ratio to Inches, CM and Pixels. However with the Newer version this option is no longer available.
Hopefully this will safe some of you the time looking for this.

Precisely what Conrad Chavez says: a very good change.

Is cropping possible with Compressor-2?

I'm a newbie and have a newbie question.
I have a movie clip (.mov) that I need to compress for the web. My clip shows a guy running on a treadmill in a gym.
The clip is currently 720x480 and I need to crop out everything except for the guy's tennis shoes and end up will a finished size of 200x100.
Is it possible to crop video with Compressor, the same way you crop images with Photoshop? Can I specify the exact size I want (200x100)? If so, how is this done?
Thanks in advance.
Warren

There are two ways you can do it:
From the preview window, resize the red cropping border; hold down shift to constrain the aspect ratio of the crop.
From the settings inspector, click the Geometry tab, and voila!
Power Macintosh G5 Dual 2GHz, 4GB RAM Mac OS X (10.4.3) MacBook Pro 17" 2.16 GHz 2GB RAM

Crop tool reverts to 1:1, not recognize existing crop ratios or constrain

Oh this is a bummer
Open up a project that has crops applied to images.
Select one of these files, hit C to edit the crop.
Say it was an existing 2x3 crop that you want to adjust, you must now select that ratio BEFORE adjusting the EXISTING crop, as the tool defaults to unconstrained 1:1.
ACK!!!

Your welcome. I'm with you, by-the-way.
bug, beahvior, feature...
Bottom line is if I am required to manually RESELECT
the crop ratio before modifing the crop, I am wasting
time and money.
Thanks for your verification!

VPRS with Free Goods and Batch Determination

Dear Experts,
I have a problem on the products billing with Free Goods.
I will explain this, before the implementation of Batch Management (with batch split) the billing document show the condition VPRS on the main item (TAN) and the free goods item (TANN).
Now, when the Batch Management was up, the condition VPRS disappeared on the TANN item, I checked the order and it does shows the VPRS conditions. When i check the conditions on the billing document it shows me the following message when i check the VPRS condition
Condition ignored (requirement 004 not fulfilled)
Then I tried to debug the price determination and i realized that only on the TANN position the field komp-evrwr (price determination on the item category) is not 'X'.
Aditionally i can mention thar the batch split item category is defined as YG05.
Actually i only managed to show the cumulated VPRS cost on the main item.
Please someone say to me if this correct or there is a way to put the VPRS on the free goods item.
Javier Sandoval Vera
Ecuador

Dear Javier Sandoval Vera,
As per the standard pricing Routine 4-Cost system may calculate the cost only for the pricing related materials,here TANN item is not relavent for pricing so system is giving that message.
If you want consider non priced item also in the cost calculation then you can develop new routine as per your requirement with the help of ABAPer. (by copyingh the existing routine 4 then do the changes accordingly).
Or
You can maintain R100 -100% discount condition type in your pricing procedure,maintain settings as manual condition.
Now maintained the price relevant check for free item also then give the 100% -discount by entering R100 condition type manually with 100% discount for that specific item to make the item price as zero.
Now sytem will calculate the VPRS value without fail.
I hope this will help you,
Regards,
Murali.

VPRS with Free Goods and Batch Management

Dear Experts,
I have a problem on the products billing with Free Goods.
I will explain this, before the implementation of Batch Management (with batch split) the billing document show the condition VPRS on the main item (TAN) and the free goods item (TANN).
Now, when the Batch Management was up, the condition VPRS disappeared on the TANN item, I checked the order and it does shows the VPRS conditions. When i check the conditions on the billing document it shows me the following message when i check the VPRS condition
Condition ignored (requirement 004 not fulfilled)
Then I tried to debug the price determination and i realized that only on the TANN position the field komp-evrwr (price determination on the item category) is not 'X'.
Aditionally i can mention thar the batch split item category is defined as YG05.
Actually i only managed to show the cumulated VPRS cost on the main item.
Please someone say to me if this correct or there is a way to put the VPRS on the free goods item.
Javier Sandoval Vera
Ecuador

Hi Javier,
what do you do with the VPRS in your calculation- system ?
If you need i, you delete the requirement 004 in your calculation -system.
on the other hand, you can change TANN to komp-evrwr (price determination on the item category) is 'X'. Then you have to add an 100% rabate for TANN and the resukt will be free good.
Hans

BAPI_SalesOrder_CreateFromDat2 fails for items with free goods

Hi all, I have a very weird problem when I am trying to create a sales order using SAP .net connector with the BAPI function BAPI_SalesOrder_CreateFromDat2(). The problem happens through the following scenario:
1 - Item X has a free good rule on it that states "If user buys 5 Cartoons of Item X he will take 1 pack of Item Y free of charge" while Item Z has no rules like this
2 - using BAPI and .net connector, an order is needed to be created with following details:
a - Item X with quantity 6 Cartoons.
b- Item Z with quantity 3 Cartoons
3 - If BAPI_SalesOrder_CreateFromDat2() assigns these details to Order_Items_In with the same order (a then b), SAP will return an error for Item z that states "No item category available (Table T184 ZKE NORM KEN)."; while if the function tries to create the order with details in reverse order (b then a ), the order will be created successfully.
I have done the following steps:
1 - Tried the same order in SAP GUI but it succeeded. (So no problem in Item Category Determination)
2 - Tries the same order with the suspicious order in the BAPI function Test inside SAP GUI (using tcode BAPI or SE37) but the function had not return any errors also.
3 - Tried to send Item Category in code when calling the bapi function (Forced the code to KEN), but the same message appeared as SAP insist on redetermining the Item Category and return this meaningless message.
thanks

Hi Mohamed Abd Elbaset,
I am facing the same issue while creating the Sales order through "BAPI_SALESORDER_CREATEFROMDAT2" All is going well in normal cases but when I process the contract with FREE GOODS line items for which free goods condition record is maintained it fails
to create the Sales order. Is there any special treatment for this Free goods case..
Regards,

HT201493 Why when I try to sign in to Find my Friends does it tell me I cannot as my iPhone is not supported with free iCloud service? I do not use find my friends on another device.

Why when I try to sign in to Find my Friends does it tell me I cannot as my iPhone is not supported with free iCloud service? I do not use find my friends on another device.

So, have you created an iCloud account and is your device connected to iCloud?

Bom with free goods

hi
am not tht experience in sap as well not tht expert as u guys but i was just wondering while practicing sap tht can v do bom with free goods as even my faculty who is a reall timmer couldnt solve this probs
i did tried every possible way tried item category determinatino n all but couldnt
it would b great if u solve this n email me back witht the solution
can mail me the solution on
[email protected]
thnks a lott

well exactly true i just wanted to see tht this forum really works n it does with some great experts neways mr ram very much thankful to u n basically i been trying this for 4 months but couldnt ya can do it 1 way u can do it manually in the sales order by changing the item category to tann at item level
try this 1 n ya mr ram do u work in us
if so thn b in touch
bye irfan
[email protected]

Two errors during cancellation of AR Credit Memo with 'Free of Charge' option

Dear all,
I've created a AR Credit Memo - with Free Of Charge option established.
After I've tried to cancel this document. SAP shows the following error messages:
- No matching records found '' (SWEI) (ODBC -2028) [Message 131-183]
- No matching records found (JDT1) (ODBC - 2028)
Please note that if a take out option 'Free Of Charge' from AR Credit Memo I'm able to cancel the document.
Thank you in advance.
Kind Regards,
Mariana
--> Customer using SAP BO 9.1 PL 05.

Crop ratios with free orientation

Similar Messages

Maybe you are looking for