Crop to artboard (need vector output)

Greetings,
Essentially, I need to crop some work to the artboard.  All of the suggestions I've read so far include the export option but I need this design to import into Flash.  My instructor will not permit anything but vector drawings.  I can't export to any sort of raster format or pdf.  Ideally, it needs to remain as an ai file.  When I do the import from Flash, it keeps everything outside the bounds of the artboard (highlighted in red on my screenshot).
This is a group project. I didn't do this drawing, I just wanted to add the perspective lines to the floor.  Now it's a bit of an untidy mess when it goes to Flash.  And Illustrator is not my strong point.  I did try unsuccessfully to "erase", Scissor, knife and a few other things but I really don't know how those tools work.  I also tried the clipping mask approach but it didn't want to combine my rectangle "mask" with the lines on the floor.
I'm using AI CS4 and Flash CS6.  Any help would be greatly appreciated.  Thank you.

Make sure that either there is no selection at all or only the lines are selected.
edit: When learning tools and they don't work as expected, it is a good idea to try them by creating a new document with a very simple content. For example Create a new document, take the Line tool, draw a few lines, and try to erase them as I suggested. If it works there at least you will see and know how it works and if it doesn't work on another document you will know that there is something in that document that makes things different and you can try to figure out what it is.
The difference between Clipping Mask and Eraser is that the Clipping Mask hides the unwanted parts while the Eraser actually removes them which may not matter for your case.

Similar Messages

  • Crop to Artboard missing in Illustrator CS6

    Can anyone help me?
    Illustrator CS3 had a feature that was "trim/crop to artboard" but I cannot find it now in CS6. So now when I save my work, it does not confine the save to the artboard but includes all the art on the file, messing up all the map work I have isolated with the artboard.  The only thing close now is the "fit to artboard" which is exactly opposite of what I need and had in CS3. Am I missing something or somewhere?
    HELP!

    I have tried both ai and eps, and even when I export to jpg it is the entire map with the outline of the artboard showing where I want it to be but not cropped to that boundry.

  • Report is executing in background and need data(output) in excel format

    Report is executing in background and need data(output) to get downloaded in excel format in my PC from an internal table;;in any drive i.e. C: or D: .When executing in backround it prompt to user with which location excel file to be saved and the name of file.How to download in background in excel format?
    Edited by: PRASHANT BHATNAGAR on Aug 26, 2008 6:24 AM

    Hi
    Download a report to excel with format (border, color cell, etc)
    Try this program...it may help you to change the font ..etc.
    Code:
    REPORT ZSIRI NO STANDARD PAGE HEADING.
    this report demonstrates how to send some ABAP data to an
    EXCEL sheet using OLE automation.
    INCLUDE OLE2INCL.
    handles for OLE objects
    DATA: H_EXCEL TYPE OLE2_OBJECT,        " Excel object
          H_MAPL TYPE OLE2_OBJECT,         " list of workbooks
          H_MAP TYPE OLE2_OBJECT,          " workbook
          H_ZL TYPE OLE2_OBJECT,           " cell
          H_F TYPE OLE2_OBJECT.            " font
    TABLES: SPFLI.
    DATA  H TYPE I.
    table of flights
    DATA: IT_SPFLI LIKE SPFLI OCCURS 10 WITH HEADER LINE.
    *&   Event START-OF-SELECTION
    START-OF-SELECTION.
    read flights
      SELECT * FROM SPFLI INTO TABLE IT_SPFLI UP TO 10 ROWS.
    display header
      ULINE (61).
      WRITE: /     SY-VLINE NO-GAP,
              (3)  'Flg'(001) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
              (4)  'Nr'(002) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
              (20) 'Von'(003) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
              (20) 'Nach'(004) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
              (8)  'Zeit'(005) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP.
      ULINE /(61).
    display flights
      LOOP AT IT_SPFLI.
      WRITE: / SY-VLINE NO-GAP,
               IT_SPFLI-CARRID COLOR COL_KEY NO-GAP, SY-VLINE NO-GAP,
               IT_SPFLI-CONNID COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
               IT_SPFLI-CITYFROM COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
               IT_SPFLI-CITYTO COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
               IT_SPFLI-DEPTIME COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP.
      ENDLOOP.
      ULINE /(61).
    tell user what is going on
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
         EXPORTING
              PERCENTAGE = 0
               TEXT       = TEXT-007
           EXCEPTIONS
                OTHERS     = 1.
    start Excel
      CREATE OBJECT H_EXCEL 'EXCEL.APPLICATION'.
    PERFORM ERR_HDL.
      SET PROPERTY OF H_EXCEL  'Visible' = 1.
    CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 = 'c:\kis_excel.xls'
    PERFORM ERR_HDL.
    tell user what is going on
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
         EXPORTING
              PERCENTAGE = 0
               TEXT       = TEXT-008
           EXCEPTIONS
                OTHERS     = 1.
    get list of workbooks, initially empty
      CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
      PERFORM ERR_HDL.
    add a new workbook
      CALL METHOD OF H_MAPL 'Add' = H_MAP.
      PERFORM ERR_HDL.
    tell user what is going on
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
         EXPORTING
              PERCENTAGE = 0
               TEXT       = TEXT-009
           EXCEPTIONS
                OTHERS     = 1.
    output column headings to active Excel sheet
      PERFORM FILL_CELL USING 1 1 1 'Flug'(001).
      PERFORM FILL_CELL USING 1 2 0 'Nr'(002).
      PERFORM FILL_CELL USING 1 3 1 'Von'(003).
      PERFORM FILL_CELL USING 1 4 1 'Nach'(004).
      PERFORM FILL_CELL USING 1 5 1 'Zeit'(005).
      LOOP AT IT_SPFLI.
    copy flights to active EXCEL sheet
        H = SY-TABIX + 1.
        PERFORM FILL_CELL USING H 1 0 IT_SPFLI-CARRID.
        PERFORM FILL_CELL USING H 2 0 IT_SPFLI-CONNID.
        PERFORM FILL_CELL USING H 3 0 IT_SPFLI-CITYFROM.
        PERFORM FILL_CELL USING H 4 0 IT_SPFLI-CITYTO.
        PERFORM FILL_CELL USING H 5 0 IT_SPFLI-DEPTIME.
      ENDLOOP.
    changes by Kishore  - start
    CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
      CALL METHOD OF H_EXCEL 'Worksheets' = H_MAPL." EXPORTING #1 = 2.
      PERFORM ERR_HDL.
    add a new workbook
      CALL METHOD OF H_MAPL 'Add' = H_MAP  EXPORTING #1 = 2.
      PERFORM ERR_HDL.
    tell user what is going on
      SET PROPERTY OF H_MAP 'NAME' = 'COPY'.
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
         EXPORTING
              PERCENTAGE = 0
               TEXT       = TEXT-009
           EXCEPTIONS
                OTHERS     = 1.
    output column headings to active Excel sheet
      PERFORM FILL_CELL USING 1 1 1 'Flug'(001).
      PERFORM FILL_CELL USING 1 2 0 'Nr'(002).
      PERFORM FILL_CELL USING 1 3 1 'Von'(003).
      PERFORM FILL_CELL USING 1 4 1 'Nach'(004).
      PERFORM FILL_CELL USING 1 5 1 'Zeit'(005).
      LOOP AT IT_SPFLI.
    copy flights to active EXCEL sheet
        H = SY-TABIX + 1.
        PERFORM FILL_CELL USING H 1 0 IT_SPFLI-CARRID.
        PERFORM FILL_CELL USING H 2 0 IT_SPFLI-CONNID.
        PERFORM FILL_CELL USING H 3 0 IT_SPFLI-CITYFROM.
        PERFORM FILL_CELL USING H 4 0 IT_SPFLI-CITYTO.
        PERFORM FILL_CELL USING H 5 0 IT_SPFLI-DEPTIME.
      ENDLOOP.
    changes by Kishore  - end
    disconnect from Excel
         CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING  #1 = 'C:\SKV.XLS'.
      FREE OBJECT H_EXCEL.
      PERFORM ERR_HDL.
          FORM FILL_CELL                                                *
          sets cell at coordinates i,j to value val boldtype bold       *
    FORM FILL_CELL USING I J BOLD VAL.
      CALL METHOD OF H_EXCEL 'Cells' = H_ZL EXPORTING #1 = I #2 = J.
      PERFORM ERR_HDL.
      SET PROPERTY OF H_ZL 'Value' = VAL .
      PERFORM ERR_HDL.
      GET PROPERTY OF H_ZL 'Font' = H_F.
      PERFORM ERR_HDL.
      SET PROPERTY OF H_F 'Bold' = BOLD .
      PERFORM ERR_HDL.
    ENDFORM.
    *&      Form  ERR_HDL
          outputs OLE error if any                                       *
    -->  p1        text
    <--  p2        text
    FORM ERR_HDL.
    IF SY-SUBRC <> 0.
      WRITE: / 'Fehler bei OLE-Automation:'(010), SY-SUBRC.
      STOP.
    ENDIF.
    ENDFORM.                    " ERR_HDL
    Regards
    Murali Papana

  • I need to output a PAL HDV project from FCP as a PAL DV file with 4 audio t

    I need to output a PAL HDV project from FCP as a PAL DV file with 4 audio tracks - specifically one stereo pair to be t1&t3, the other stereo pair to be t2&t4. This is the standard way requested by an international distributor of tv programmes. I understand how to set the sequence in FCP to output 4 audio tracks - either 2 stereo pairs (1&2, + 3&4), or 4 discrete tracks. But how do I then output this as a QT file?
    The manual tells me that to export multiple audio tracks, File>Export>QT Movie has it's Config pop-up menu in the Audio Settings area of the General tab of the Sequence Settings. Well, that's set for 4 discrete channels, but the QT export settings only allow for 2 mono or 1 stereo output, and that's what I get when I try it. What it says in the manual just doesn't happen.
    Exporting via Compressor, on the other hand, has an abundance of choices of 4-track outputs, none of which are labelled as anything resembling 'discrete'. Would any of those 4.0 settings suffice? Or am I likely to get myself into difficulties further down the line? As I am monitoring for this task on a 2-track audio system, I cannot confirm exactly what I am getting when I use any of those settings.
    Any advice would be greatly appreciated!
    John

    Call me naive, but I've not heard of splitting the stereo pairs like this before.
    What broadcaster? (perhaps one of our EU regulars will drop in...)
    You can do all sorts of pairing but it is coincident tracks pairing- eg 1/2 + 3/4
    Sorry I can't offer anything.
    x

  • Need smartform output in different languages

    Hi expert,
    Can you please let me know how can I see the output of a smartform in different languages. I'm seeing the output of a sales order. I have three output types . ZZAC,ZZ00, ZZ01. The smarform is developed with the language attributes of Translate into all languages. Is it required to convert the forms in SE63? or there are other ways we can see it.
    I need the output in all the languages like FR,EN,DE,IT,ES ,EN etc.
    Thanks in Advance,
    Abhi

    HI,
    Try This... hope it will solve your problem....
    To maintain the translations:
    1. Go to transaction SE63 in R/3. Go to menu Translation->R/3 Enterprise->Other Long Texts.
    2. Select the object type in the pop up. Smartform (SSF) object type is found under Forms and Styles(FS).
    3. Enter the name of the Smart form and choose the source and target language(Let the Source Language be 'EN'). Now Click on 'EDIT'.
    4. This would open a screen with the Smartform code in Source language on the top and an editor with the same code in the bottom. Find the text for which you need to maintain the translation and insert the translation in that place.
    As usual after required texts are maintained Save and Activate.
    To see the translated Smartform create an output type and assign the smartform and the driver program to this output type. In the transaction that sends output to this smartform, select the output type and select the language in which the smartform has to be displayed (translations have to be maintained in this language).This will give the smartform in the required language.
    Regards,
    Shri

  • Proxy To file scenario : need the output in hierarchial structure

    Hi all,
    I am doing a proxy to file scenario. Now I am getting the output as :
    <documents>
    <document>
    <header>
    <delivery_number></delivery_number>
    <tax_number/>
    u2026
    </header>
    <data>
    u2026
    </data>
    </document>
    <document>
    <header>
      u2026
    </header>
    <data>
       u2026
    </data>
    </document>
    u2026
    </documents>
    But I would like to change the output to below structure.
    <documents>
               <document>
         <header>
                                 <delivery_number></delivery_number>
                                 <tax_number/>
                                  u2026
                         </header>
         <data>
                                     u2026
                          </data>
               </document>
               <document>
         <header>
                                 u2026
                          </header>
         <data>
                                u2026
                         </data>
                 </document>
    u2026
    </documents>
    Can anyone suggest me how can I get this?
    Thanks,
    Arivarasu S
    Edited by: Arivarasu S on Jan 31, 2011 2:54 PM
    Edited by: Arivarasu S on Jan 31, 2011 3:00 PM

    <documents>
          <document>
                <header>
                           <delivery_number></delivery_number>
                            <tax_number/>
                                      u2026
                 </header>
                 <data>
                            u2026
                  </data>
           </document>
    </documents>
    I need the output as mentioned above.. pls let me know how can i achieve this..
    Thanks,
    Arivarasu S
    Edited by: Arivarasu S on Jan 31, 2011 6:59 PM

  • Need to output # of rows after date

    This seems like it probably has a simple solution that I just
    can't seem to get correct...
    I need to output the next 4 events that take place from the
    current date. I tried:
    <cfloop from="1" to="4" index="i">
    <cfif #DateFormat(games.gamedate)# GTE
    #DateFormat(Now())#>
    all the info that is displayed here
    </cfif>
    </cfloop>
    However this is just returning all the games that take place
    from the current date, and lists each game 4 times. I also tried
    putting maxrows="4" in my <cfoutput> statement, but that
    returns nothing.
    Any and all help is much appreciated.

    here's the entire block of code (minus the references to
    getting the next 4 records...this works but just lists all games
    from today on out):
    <cfquery name="athgames" datasource="#dsn#"
    username="#db_user#" password="#db_pass#" dbtype="query">
    SELECT *
    FROM Athletics
    WHERE sport = 'Basketball'
    ORDER BY gamedate ASC
    </cfquery>
    <cfset endofweek = dateAdd("d", +6, now())>
    <cfoutput query="athgames" group="gamedate">
    <cfif #DateFormat(athgames.gamedate)# GTE
    #DateFormat(Now())#>
    <cfif #DateFormat(athgames.gamedate)# EQ
    #DateFormat(Now())#>
    <p><u>Today's Games</u><br />
    <cfelse>
    <p><u>#DateFormat(athgames.gamedate, "dddd, mmmm
    d")#</u><br />
    </cfif>
    <cfoutput>
      #athgames.homeaway#
    #athgames.opponent# -
    <cfif #TimeFormat(athgames.gametime, "h:mm")# EQ
    #TimeFormat("12:59 AM", "h:mm")#>
    TBA
    <cfelse>
    #TimeFormat(athgames.gametime,"h:mm tt")#<br />
    </cfif>
    </cfoutput>
    </p>
    </cfif>
    </cfoutput>

  • Need report output same as its show in the previewer in the (.txt and .xls) format

    I need an output file(in text and excel format) generated from the report builder exactly in same format as it shows in the Report previewer.
    it should include all the labels as well as the data.
    Thanx in advance
    Reply ASAP
    From
    Dharmendra

    Hi Dharam
    You can create text file output as seen on Live Previewer by generating to Text (File->Generate to File->Text). Ensure that you run Builder with the following command line parameter:
    MODE=CHARACTER
    If the Builder mode is not character (BITMAP), it will generate PostScript file if you do a File->Generate to File->Text.
    You can create Excel format output from Reports with Delimited output (File->Generate to File->Delimited). In the ensuing dialog box, choose comma (,) as the delimiter to obtain a CSV file. Export this file in Excel.
    Regards
    The Oracle Reports Team

  • I just purchased photos from shutterstock and they said it will download as .eps file. They said I would need vector editor such as adobe illustrator to convert the image to a jpeg. Could anyone advise me how to do this? This is all very foreign to me. Th

    I just purchased photos from shutterstock and they said it will download as a .eps file.They said I would need vector editor such as adobe illustrator to convert the image to a jpeg. Could anyone advise me on how to do this? This is all very foreign to me.
    The Swanky Lady

    File>Open to open your eps file
    File>Export to export your image as a jpg.
    In the export dialog box just below where you type in the filename is a file type, that is where you choose jpg.
    What ever you do, do not delete the eps file. Should you ever need to access the original you will have have.
    I recommend that instead of jpg you choose psd, tiff, or png and use jpg only for sharing. Jpg is a lossy format meaning each time you edit the file and save it, the quality of that file degrades. The formats I recommend are lossless formats, you can edit them all you want no data is being discarded unless you choose to do so.

  • Vector Output from PSE?

    I have PSE 6.0 on a WinXP machine. My question has to do with producing vector output files using only PhotoShop Elements.
    PSE is capable of producing PDF files as output. My understanding is that PDF files are vector rather than raster. In Elements shapes and type are drawn as vector so does it follow that saving an image which only includes shapes and type as a PDF result in a PDF with the type and shapes as vectors? In other words is the vector information to draw type and shapes saved in the PDF file using Save As?
    Steve

    PSE will normally let you make a backup or data disk on CD.
    What is the purpose of this CD?
    If you also have Premiere Elements, its possible to burn a DVD which can then be viewed on TV sets.

  • I am needing 3 output displays on my mini.

    We are needing 3 outputs but the thunderbolt only allows 2 outputs. Can I use the USB output as my 3rd display with an adapter?

    Yes, there are USB video adopters like
    http://www.tripplite.com/usb-3.0-superspeed-to-displayport-dual-monitor-external -video-graphics-card%20adapter-512-mb-sd…
    However, there may be some lag.
    there is also this
    http://www.matrox.com/graphics/en/products/gxm/dh2go/digital_me/

  • Illustrator CS4: Exporting as cropped image, unable to define Crop Area or Crop to Artboard

    Preface: I am using Adobe Illustrator CS4 Design Premium, Windows version.
    I am currently designing some projects in Illustrator CS4. I am NOT using multiple artboards, only one. On previous versions of Illustrator, users could simply Export> an image as a JPG, and the image would be appropriately cropped to either the Document size, or predetermined Crop Area marks which were easily chosen in the Object dropdown menu.
    Since the ever useful Object > set cropmarks function was removed with the advent of CS4, I am unable to Export an Illustrator file as a high-res JPG or TIF using the supposed Artboard as the cropmarks. In other words, when trying to export my project, the saved/exported image includes all content placed in the document, even material that extends beyond the Document size or Artboard size. Why is this? What am I overlooking?
    In the Artboard dialogue or settings, I cannot locate any option to set the Artboard as the default crop area for Exporting, saving, and printing, etc.
    After doing a bunch of research trying to find a fix, I have only discovered that there are thousands of other people posting on various forums regarding this same issue, so I think a detailed and complete explanation or instruction on how to do this would be very helpful and appreciated.
    Other than in the Save For Web & Devices settings, there seems to be no options to Export using cropmarks, or export a file to be properly cropped to the Artboard dimensions. Again, I know this function is possible when Saving for Web, but not with a normal high resolution Export as a flattened image such as a jpg... or at least I can't find out how.
    Any help is appreciated, thanks.

    Yeh this is pathetic and in my opinion a bug or false advertising. Since they haven't fixed it i believe this is false advertising and misleading for users who may have upgraded for this "feature".
    I do know some CS2 users who are holding out from upgrading for this reason!!
    I wonder what CEO's or higher ups would say if they heard or could understand this issue...How does program loose features meanwhile Adobe has how many billions in resources to fix these type of issues for their users who paid a pretty solid chunk for software that should work properly.
    Need some competition to fire them up! (any alternatives to illustrator anyone actually using?)

  • When will Flash CC support vector output?

    Using CS6 is awful on a retina monitor, and isn't a valid long-term solution.

    Adobe need  to address this issue. I used to rely heavily on ai export from Flash which worked fine in earlier versions. Now there seems to be no route to get vector stills from Flash. The SVG output in CC2014 although slow and clunky was OK - but doesn't now work - < I get a JS error..>. now that's left me with a huge problem... I pay good money for CC every month - and I'm a lifelong Adobe fan - but I think their product support (via CC app update) of late has become very shoddy - Adobe: these are professional products for which professional subscriptions are being paid.. you've taken years to build up your reputation - so please - SORT these issues! 

  • Calling report from form. Need PDF output

    I am calling a report from a form using RUN_PRODUCT. I need to display the form in PDF format. When the user clicks the button in the form to run the report, acrobat reader should open up and the report displayed there. Please help.
    Thanks

    Thanks for the response. The first part worked. I am able to get the output in PDF format. In the 2nd part where I want to open acrobat and display the output, I am having some trouble with the code. When I compile, it says
    win_api_environment.read_registry must be declared. Is there some package I need to attach?
    Also, in the After reports trigger, how do I pass vFile (I am assuming this is the PDF file name)?
    Thanks
    The first thing you'll want to do is pass parameters to the report IE DESTYPE, DESNAME and DESFORMAT where these could be FILE, 'c:\temp\report' and PDF.
    Then, you can try this piece of code I wrote (with some help from other people at Metalink and here) sometime back. Now, I call it from forms, but in your case, you'd have to run it in the after report trigger. Since with RUN_PRODUCT you don't know when the report is finished, if you did it from the form, it wouldn't work correctly.
    PROCEDURE OPEN_PDF(vFile IN VARCHAR2)
    IS
    vcServerApp varchar2(40);
    vcServerTag varchar2(600);
    vcCommand varchar2(2000);
    iArgPos pls_integer;
    dummy NUMBER;
    BEGIN
    -- 1 get the Server App for .PDF files
    vcServerApp := win_api_environment.read_registry('HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\.PDF','',true);
    -- 2 get the executable
    vcServerTag := 'HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\'||
    vcServerApp||'\SHELL\OPEN\COMMAND';
    vcCommand:= win_api_environment.read_registry(vcServerTag,'',true);
    -- 3 Sort out how to specify the Filename
    iArgPos:= instr(vcCommand,'%1');
    if iArgPos = 0 then --no substitution Var on the command line
    vcCommand := vcCommand||' '||vFile;
    else
    vcCommand := substr(vcCommand,1,(iArgPos-1))||
    vFile||substr(vcCommand,(iArgPos+2));
    end if;
    -- 4 Run using Winexec (or Host if preferred).
    win_api_shell.winexec(vcCommand);
    EXCEPTION
    when no_data_found then
    abortt('Acrobat Reader was not found! Please consult with your help desk to install it and try again.','N');
    END;
    Chad
    I am calling a report from a form using RUN_PRODUCT. I need to display the form in PDF format. When the user clicks the button in the form to run the report, acrobat reader should open up and the report displayed there. Please help.
    Thanks

  • DVI to S-Video & Composite plug cable needed for output to audio/TV system

    I'm in need of a DVI to S-Video and Composite plug cable to replace the Monster iTV Link cable I used with my 12" Aluminum PowerBook. (http://www.monstercable.com/apple/Computer.asp) I use it to output to my audio/TV system.
    Whereas the PowerBook used a mini-DVI port and had the audio output jack on the same side of the computer, the MacBook Pro uses a full size DVI port and has the audio jack on the opposite side!
    I've been unable to find a cable so that I can connect up to a TV. Does anyone know where I can find one? Or perhaps a DVI to mini-DVI adapter? Or perhaps a VGA to S-Video/Composite cable and I can use the DVI to VGA adapter that came with the computer?
    This is very frustrating!

    Apple's video adapters have a ROM chip inside them with EDID data contained within the ROM. That is one thing that will definitely be different between the two. The NTSC and PAL version (M9267G/A) gives priority to NTSC. This could cause problems in a PAL country. If you hooked a PAL TV up using this adapter, you might get a rolling (non-synced) screen and you'd have no good way to recover since the image on the screen would be unusable.
    I don't think one adapter would have any advantage over the other in terms of PAL picture quality. It would just be a question of compatibility as outlined above. That's my best guess.

Maybe you are looking for