Crop Tool crashes when OPENGL is activated

Hi,
im on vista 32bit and my notebook video driver is intel 965 chipset ( i just updated my drivers)
probem is when i enable my OPENGL in order to use the rotate canvas feature, crop tool crashes whenever i activate it. most of the tools work ok(haven\t tried all yet)
but when i disable OpenGL, crop tool works fine.
I need the rotate canvas feature & thus OPENGl enabled.. what can I do about the crop tool(and most probably some other tools) crashing on me?
i already tried resetting & install/reisntall. .does not help!!
pls advice!]

You could try playing with the settings of OpenGL in the PS preferences dialog.
Or look at the video driver settings in Display Properties.
Otherwise, as I said, your computer may not be up to it.

Similar Messages

Crop Tool Confusion When Used to Change the Dimensions (but not the resolution) of an Image

Picture this. You have a real photograph in front of you. Its dimensions are 7x5 inches, and you want to cut out of that photograph, a 4x4” square. You’re not bothered by the rest of the photograph, you’ll discard that, so you mark your 4” square on the photo at the place you want to keep, and with a pair of scissors, cut (crop) the photo accordingly.
Using the analogy above, I’m having difficulty achieving what should be an extremely simple operation in Photoshop CC 2014. I have an image which is 5000px wide x 3800px high at a resolution of 240px/inch.
Using the “W x H x Resolution” option of the crop tool, I want to crop the image to 2100px x 2100px, maintaining the original image resolution of 240px/inch. No matter what settings I use in the crop tool toolbar, the crop tool insists on sizing the crop by assuming the full length of the shortest axis on my image. In this instance the vertical distance. If I initiate the crop, I do end up with a 2100px square image at 240px/inch, but the shortest original dimension (and hence pro-rate the image) has been rescaled and resized.
What I was expecting to see is the crop tool outline simply showing a square which represents 2100px a side at 240px/inch relative to the image I’m viewing. I would then drag the outline to the position where I wanted it, and then crop the image. This isn’t happening. I can manually resize the crop area with my mouse, and rely on the floating information pop-up to check the actual crop dimensions, but this seems counter-intuitive (not to mention difficult when attempting a pixel accurate crop).
Strangely enough, if I change the size of the crop window by using the mouse, and right click inside the crop area, the context menu has the option “Use Crop Box Size & Resolution”. Selecting this option updates the toolbar with the chosen crop size and everything is as expected. Surely, this is what the crop toolbar should do in the first place?
Am I missing something here? I may not perform this particular operation very often in Photoshop, but I’m sure it worked the way I thought is should before!
Regards,
Steve

What I was expecting to see is the crop tool outline simply showing a square which represents 2100px a side at 240px/inch relative to the image I’m viewing. I would then drag the outline to the position where I wanted it, and then crop the image.
You'd better use the Marquee tool for this. Set the desired number of pixels in the options bar. Click and drag and finally Image > Crop.

LR 5.x crop tool bug: selection jumping on activation

Hi,
I did not see this reported, but I'd be rather surprised if nobody had noticed the issue before.
I'm seeing this behavior since I upgraded from LR 4 to LR 5. I think I did the upgrade with 5.3, but at 5.6 I still have the following problem:
After setting a cropping rectangle (usually with rotation), then change some settings (e.g. exposure, shadows, blacks, etc.) and then activate the cropping tool again, the displayed image jumps to the original frame size for half a second and then back to the previously set crop.
Since I usually go back to cropping only for small changes in rotation, this is especially annoying, because it irritates the eye in a way that I'm sometimes not even sure if I'm seeing my previous setting again. And then I have forgotten how I actually wanted to adjust the setting
This seems to me like a bug introduced in LR5. I'm using Lightroom since version 2 and never had this behavior until the upgrade to LR5.
I'm using Windows 7 Pro 64-bit, nvidia Graphics.
Steps to reproduce:
1) Open an image in the development module (I'm using Canon CR2 raws)
2) Set a cropping window
3) change some image settings, e.g. exposure
4) activate the cropping tool
Please fix this behavior.
Thanks,
Karsten

Thanks for the clarification. Too bad that the fix did not make it into LR 5.6.
I'm new here, so please apologize my beginners question: Is there a place where I can find bug reports that were accepted as known bugs? I tried the community search on cropping tool and did not find any related bugs.
Thanks,
Karsten

BI Admin Tool crashes when importing from Essbase

Hi folks,
I'm trying to import an Essbase cube into my OBIEE RPD and it is causing the Admin Tool to crash with a generic Windows error msg that "BI Admin Tool has stopped working and Windows is looking for a solution"..
I'm using OBIEE 10.3.1.4 with all components, including BI Server installed on my local machine which is Windows 7 32-bit. The Essbase server is on a different machine. The RPD is working fine for several other data sources, and crashes only when I try to import from Essbase. The Essbase server is also working fine. The crash happens regardless of whether I'm in online or offline mode. I even tried to create a new RPD in case the other one was corrupted, but even the new one crashes.
I have Essbase client installed on the same machine as BI Server and my environment variables seem fine. All ports on the Essbase server machine are open and I can ping it from the BI Server machine, so it is not a network issue. I know this version of OBI is not officially supported on Windows 7, but it's working fine in all other respects. Has anyone had a similar problem in the past?
Appreciate any advise.
thanks,
Axe
Edited by: axe1 on Oct 19, 2010 5:54 AM

I wonder if cube import only works when using a 32-bit Essbase client?

Photoshop CS3 - Program error. Crashes when working off active desktop

Unprovoked my version of photoshop CS3 has suddenly started to crash whenever I click off the active workspace (for example clicking on my desktop or moving into the dock).
After force quitting the application I can open photoshop again and continue working until I move onto another application or select any function outside photoshop. Then it crashes again.
Tried reinstalling but with no improvement.
OSX 10.5.2
G5 mac
lots of memory.
Thanks.
Any help or advice is appreciated.

Leopard is really sucky isn't it?

Scribble tool crashes when zooming in

I have rather simple selection to do with PS Touch 1.5.1. I'm using scribble tool and for accuracy I zoom in heavily. After 3 to 4 attempts, I had to give up as some point of time the app crashes fully. Any proposals? Or should I wait for update?
w. Brs,
Rauno

Any general steps to repro? I'm trying to repro but cannot seem to do so. (I'm using PS Touch 1.5.1 on a Google Nexus 7 (2013) with Android 4.3.)
I try to zoom in all the way (400% is the max) and cannot get it to crash.

MacOS X 10.5.2 Server still crashes when Airport is activated

Hi,
after updating to MacOSX 10.5.2. Server the problems with the airport card remains.
I had already several system crashes, all with the following stack trace:
Sun Mar 2 13:03:23 2008
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000272B0008 PC=0x00000000002CAA18
Latest crash info for cpu 0:
Exception state (sv=0x1e612280)
PC=0x002CAA18; MSR=0x00009030; DAR=0x272B0008; DSISR=0x40000000; LR=0x002AA3A0; R1=0x25173BE0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00035770 0x2E03100C 0x2E098BC0 0x2E038EC4 0x00356580 0x003557E4
0x00355898 0x000B0454
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AirPortBrcm43xx(311.46.32)@0x2e02f000->0x2e15bfff
dependency: com.apple.iokit.IO80211Family(211.1)@0x247ba000
dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x1e67c000
dependency: com.apple.iokit.IONetworkingFamily(1.6.0)@0x244f0000
Proceeding back via exception chain:
Exception state (sv=0x1e612280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x1e59a280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9C31
Kernel version:
Darwin Kernel Version 9.2.0: Tue Feb 5 16:15:19 PST 2008; root:xnu-1228.3.13~1/RELEASE_PPC
System model name: PowerBook5,1
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x0009B2F8 0x0009BC9C 0x00029DC4 0x000AF090 0x000B28F8
Proceeding back via exception chain:
Exception state (sv=0x1e612280)
PC=0x002CAA18; MSR=0x00009030; DAR=0x272B0008; DSISR=0x40000000; LR=0x002AA3A0; R1=0x25173BE0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00035770 0x2E03100C 0x2E098BC0 0x2E038EC4 0x00356580 0x003557E4
0x00355898 0x000B0454
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AirPortBrcm43xx(311.46.32)@0x2e02f000->0x2e15bfff
dependency: com.apple.iokit.IO80211Family(211.1)@0x247ba000
dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x1e67c000
dependency: com.apple.iokit.IONetworkingFamily(1.6.0)@0x244f0000
Exception state (sv=0x1e59a280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
BSD process name correspond`
The error reporting facility as well as the software update facility also fail when using the airport card, since updating to 10.5.2, with 10.5.1 ist still worked until the crash .
The hardware configuration is as follows:
Model: PowerBook5,1, BootROM 4.6.2f1, 1 processor, PowerPC G4 (3.3), 1 GHz, 1 GB
Graphics: kHW_NVidiaGeForce4MXItem, GeForce4 MX, spdisplaysagpdevice, 64 MB
Memory Module: SODIMM0/J20STANDARD, 512 MB, DDR SDRAM, PC2700U-25330
Memory Module: SODIMM1/J23REVERSED, 512 MB, DDR SDRAM, PC2700U-25330
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x4E), Broadcom BCM43xx 1.0 (4.170.25.8)
Modem: LastDash, Euro, V.92, 4.0, APPLE VERSION 2.6.7
Bluetooth: Version 2.1.0f14, 2 service, 0 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: TXN,PCIXXXX-00, cardbus, PC Card
Parallel ATA Device: MATSHITADVD-R UJ-815
Parallel ATA Device: FUJITSU MHS2060AT, 55,89 GB
USB Device: Bluetooth USB Host Controller, Apple, Inc., full_speed, 500 mA
USB Device: USB Mouse, Logitech, low_speed, 500 mA
Did I miss a firmware upgrade for my aiport card ? With 10.4.10 it worked without problems.
kind regards
Michael

Hi you probably may get more specific answers if you posted this thread in the OSX server section of the forum.
Mac OS X Server

Flash Crashes when activating WebCam

I'm having a problem across all 3 browsers (IE, FF and Chrome) where Flash will crash when I try activating the camera for recording video (and audio).
It doesn't seem to matter what webcam I have installed (I've a few to choose from) and even crashes when there isn't a webcam installed.
It seems to be failing when doing a search for an active video source.
When IE crashes I get this data for the Error signature.
EventType : BEX     P1 : iexplore.exe     P2 : 8.0.6001.18702     P3 : 49b3ad2e
P4 : unknown     P5 : 0.0.0.0     P6 : 00000000     P7 : 06371370
P8 : c0000005     P9 : 00000008
I installed and ran Adobe Flash Media Live encoder - and it doesn't crash so it's something about the browser plug-ins that's failing.
Any suggestions?

I have the same problem. As soon as the prompt comes up asking for permission to access camera, I click allow, then crash. Every time. Every browser.

TS3899 iOS 7.02 mail tool crashes on a specific email when trying to delete or read

I have a "No Sender" email in my inbox, and the mail tool crashes when ever I try to delete it or look at it.

Hi, Nancy.
If the email in question has a blank sender and dated 1969, I would recommend closing all applications in multitasking and power cycling the device.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If the issue persists, access your mail account via webmail and delete the message that way.
Cheers,
Jason H.

Crash when starting a performance/memory profile

I'm having a catastrophic crash when I hit the 'Start' button in the Profile -> Performance and Memory... dialog. There is no error message whatsoever, and when I restart Labview, it only asks me about files to recover, it doesn't tell me where it crashed (i.e. somefile.cpp line ###). Well, it might have told me once, but now it doesn't, so unless there is a log of these things somewhere, I can't say much more.
I'm using Labview 2009, and I'm having the exact same issue on at least 2 machines which are fairly different (Win XP 32 bit vs Win7 64 bit (with Labview 32 bit)).
The application is pretty large (~1500 vi's), so it's kind of hard to tell what is making it crash.
The problem can be replicated in different ways:
1) Load main VI which loads all the VI's in memory
2) Start Performance/Memory profile *crash*
1) Load VI
2) Start VI (runs in a loop)
3) Start Performance/Memory profile while it runs *crash*
1) Start Performance/Memory profile
2) Some NI VI's show up in the list with '0' time everywhere
3) Load VI
4) Execute VI
5) Stop execution of VI *crash*
Any clues? Is there a log somewhere that could help me/you find the issue?
I could spend all day trying to load different parts of the project and look for problems, but I have no idea what to look for.
Last Friday I had successfully profiled what I wanted to, then I had another crash... Oh I remember now... I did a 'Search' in my project, looked for a particular string, and it crashed after a while in the middle of the search. Since then I was unable to use the profile tool. Could it be some data corruption? We use SourceSafe... so I wouldn't be surprised if it gave me a corrupted file If so, how could I find it?
Thank you

Hey Samapico,
I actually found an incident like yours involving the performance and memory tool crashing when used for specific VIs which were very large. How big (in terms of filesize) is your VI?
R&D found this issue in LV 2009 and fixed it in 2010 under Corrective Action Request 215410.
Is there any way you could try and test your issue out on a machine with LV 2010?
<Joel Khan | Applications Engineering | National Instruments | Rice University BSEE>

How do I make the crop tool work?

Okay, The image is in adjustment view. It has a white border around it. I checked the box that says crop on it. I hover the cursor over the corners. The cursor does not change to crop tool. When I press on the crop icon it beeps a reject sound. Not sure how to phrase that. New to Aperture. Help

There is no "adjustment view" in Aperture.
What happens if you double-click the image with the selection box around it? That should take you from the Browser to the Viewer. Then, in the Crop Brick, click the little "cropping corners" icon, and you should be able to crop.
"c" is the shortcut for bringing up the crop tool when you are in the Viewer. Notice that the tools in the toolstrip (on the bottom border of the viewing area) change depending on whether you are using the Browser or the Viewer.
Strongly suggest reading the first seven chapters of the User Manual. Aperture is a rich and complex continent, mostly submerged. The first seven chapters provide a guide to the flora and fauna, as well as a map.
Message was edited by: Kirby Krieger

CS Crop tool not working due to "program error"

My crop tool works when pictures are in landscape orientation but not portrait orientation. This is a new problem that has developed within the last week. 80% of my pictures are taken in portrait orientation. A message pops up that says "Could not complete your request because of a program error." Any ideas?
Mandy

Reset the tool from the drop-down menu. If that doesn't help, reset your preferences as described in the FAQ.
http://www.adobeforums.com/webx/.ef4a07f/1
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

Fine control of the crop tool

I'm using Photoshop Elements 9 on Mac OS 10.7.2. Is there a way to fine tune the motion of the crop tool? When cropping a phot, the crop box seems to jump pixel-by-pixel. Is there a button I can hold down while cropping that will allow completely smooth movement?

You should be able to hold down the Cmd key to keep the crop tool from snapping to the edges of the document.
MTSTUNER

Rotating with crop tool unpredictable (CS3)

Hi there
I'm cropping images using the crop tool, but when I rotate the crop area and then apply the crop the result is not what I expect – it rotates only fractionally and sometimes distorts the image as well. I am resampling as I do this (ie. I have set a width, height and resolution for the crop). If I clear this there are no problems.
Any idea why this might be the case?

Hi Pierre,
Adobe fixed it partially in CS4; crop+rotate+downsample worked on a flat background layer, but still showed the unexpected results on any pixel layers. A very observant and dedicated CS5 pre-release tester (ahem... and handsome too, I might add) caught it in CS5 beta and all works well now. I think that had been around... jeeze, since PS6?

Psn crash when starting Driveclub

Was playing and talking to a friend when i was randomly disconnected, logged back in and when i started Driveclub the psn crashed again. Tried restarting my ps4, changing network and it works on other games. Does anyone else have the same problem?

Hey Samapico,
I actually found an incident like yours involving the performance and memory tool crashing when used for specific VIs which were very large. How big (in terms of filesize) is your VI?
R&D found this issue in LV 2009 and fixed it in 2010 under Corrective Action Request 215410.
Is there any way you could try and test your issue out on a machine with LV 2010?
<Joel Khan | Applications Engineering | National Instruments | Rice University BSEE>

Crop Tool crashes when OPENGL is activated

Similar Messages

Maybe you are looking for