Crop Tool Missing From Photoshop CS6 Toolbar

I am trying to use the crop tool but it appears to be missing from the toolbar on the left. I have Photoshop CS6 and I simply can't work out how to find the tool. Can someone help me out please?

Is it hidden behind the Slice tool? Any tools with a little triangle in the bottom right corner, have move tools behind them.
You could use the keyboard short cut 'c', but if the Crop tool is hidden, keep pressing Shift c until you see it.

Similar Messages

Button to show images side-by-side missing from Photoshop CS6 toolbar

In Photoshop CS6, a very important button is missing from the toolbar — the one to show two images side-by-side or above-and-below, and multiple images in other arrangements. I need this button — it’s an important part of my. (BTW, the button is still in Illustrator CS6.)

MikeKPhoto wrote:
the changes have negatively impacted productivity
I'm not seeing that, and I can't agree with your assessment. In using it all day every day since the public beta was made available, Ps CS6 has clearly improved my ability to go from raw file to finished product more quickly and reliably, and with better results at the end. It's not THAT hard to re-learn where to find the window arrangement functions - give it a week. Positionally the menu is almost in the same place the button used to be.
MikeKPhoto wrote:
By the way, do we not have a Customer Advocate, that is supposed to be on our side, notably absent from many, if not all, of these threads
What gave you this idea? I've never heard of such a person. User forums are just full of other users trying how best to use the software, occasionally trying to help others do the same...
-Noel

Crop Tool Missing in Photoshop CS4

I'm pretty new to photoshop, but I seem to missing the crop tool from the toolbar. I've updated to the newest version and have had a couple of people check it out, and no one can figure out what/where/why it's missing. None of the forums I've been on can explain this phenomenon either. Anybody know how I can retrieve the crop tool?

pli1 wrote:
That worked! Now its back on the toolbar. Do you know where I can find other shortcut commands?
In the Help files.
If you hover over a tool, a tooltip comes up with the shortcut.
You can also customise some shortcuts but not the tools..

What is missing from Photoshop CS6 ???

     I tried the new PhotoShop CS6 (beta) but aside from some innovations of which my favorite is the interface (The interface is one of the best innovation that Adobe have made finally an interface that does not make you eyes hurt) and content aware move tool (content aware is definitely the best technology in Photoshop, may in the future in Photoshop CS20 will be voice-activated and will do exactly what you say even to draw for you) and maybe the new brushis, nothing that new, especially for those who draw in Photoshop concept artists, Ilustrators and so on ... etc
      In my opinion what is missing from the famous Photoshop CS 6 and should have been is :
     1 : Live symmetry drawing (horizontal and vertical) even the simplest programs like Alchemy / Sketchbook Pro and new Painter 12 has the function they have gone beyond the horizontal and vertical with the function of Kaleidoscope. I really like how the brush works in Alchemy especially in symmetry, in Sketchbook Pro are not so good in symmetry, unless thei are round but if you have a strange shapes thei tend to function as a parallel very strange but it is ther why the famous Photoshop does not have this function ??? I hoped that in PS CS6 (beta) to be, but no, I do hope maybe in the CS7 will be,
     2: I would like to make several sets of brushes, but in different windows on the screen at the same time not only a big one something like Corel Painter 12
     3: If you put a 3d function why do you tried to do something like the Google SketchUP fast, simple to use and easy to learn, or a simplified version of ZBrush sculpture in 3d clay ???
     Ok now let's talk about Bridge CS6: same functions, nothing so new, I hope that in the cs6 to implement something like the function of ACDSee Photo Manager 12 for example:
     Preview Thumbnails in a files, shortcuts that can be modified, such as double click I want to open fullscreen preview not send in photoshop or Camera Raw etc, why not the same as Photoshop, to make what I want to what I want, preview window to have the option of framing the image even if it is small or large (fit image, reduce or enlarge) the same for full screen mode the image will be framed by the edges of the screen (fit image height or widthand reduce or enlarge) from there if you want 100%, 200% etc. and many others
     What is right, there are many other features that I like and love in Bridge much more than ACDSee 12 such as preview multiple images at the same time in preview window and Review Mode (one of my favorite) and many others but ...   ... What was more important to me I said maybe for someone else is something else missing ...

Trevor.Dennis wrote:
…Why on earth would you want to restrict Photoshop?…
Because I may consider it to be bloated already?
Because I don't need to be driving around in a motor home when my car fills my needs?
Because I don't need a hammer that doubles as a screwdriver or water-heater when I need to drive a nail?
Because a scalpel may be more useful for my purposes than a Swiss-army knife?
Because I would prefer the engineering team to work on refining existing features and improving stability rather than add features that are better served in drawing and painting applications?
Because I'm not particularly impressed by some of the new "features"?
Because I would prefer to see improvements to the History panel as have been suggested and requested over the years?
I could think of many more such reasons why.
Trevor.Dennis wrote:
…I suspect there are a great many features in existing versions of Photoshop that you don't use…
Duh! Precisely!
Software bloat adds to the cost of developing and maintaining an application, delays the release of bug fixes and genuine improvements of existing features and eventually demands greater hardware resources.
I have no clue as to what the he!! your "Prime Minister" quote is supposed to mean in the context of this discussion, unless you're implying that you feel like a 21-year-old whippersnapper who knows everything. From your avatar picture you look younger than I am. Besides, I know of very few "prime ministers" who are, were or have been particularly knowledgeable about "everything", so that may not even be a requirement for the job.

Custom shape tool missing from Photoshop CC tool bar

Hi
I am a subscriber to Photoshop and Lightroom CC and have just noticed (I need to draw a circle) that there is no custom shape tool in the left hand side tool bar; I've always just assumed it was there before. I've checked around and it seems as if it should be there but mine just isn't.
Any help gratefully received
Nick Garnett

Hover your mouse over the line tool (just above the Hand tool) and select the Custom Shape tool from the menu which appears.
Photoshop Help | Tool galleries

Strange cropping activity from photoshop cs6 to lightroom 4.3

i have never noticed the following activity:
I edited, including cropping, an image in photoshop CS6. I saved the image as a tif and also as a psd. Both sent to a folder which exists in LR catalog. Both images were revealed in LR with the SYNCHRONIZE FOLDER command.
Both images are shown in the appropriate folder, BUT BOTH ARE CROPPED MUCH MORE THAN was done in CS6 editing. Approx 1 inch has been removed along the left side (long dimension) of both images as compared to the dimensions in CS6. They happen to be sitting next to the original image in the LR catalog and it is easy to see the unwanted change. The route from CS6 to LR 4.3 was what I normally use.
WHAR COULD HAVE CAUSED THE APPARENT ADDITIONAL CROPPING SEEN IN LR. Developing in LR crop does allow the image to be restore to proper dimensions by expanding the cropped edge.
wonder if this makes any sense?
I have probably set a switch wrong in LR but cannot find my error. Photoshop seems to have performed flawlsessly.
I use iMac, i7, 10.8.2, 16GB ram.
vince
Message was edited by: vinsolo
Message was edited by: vinsolo

thank you cornelia, for your reply.
I really have no workflow as I rarely do more than retouching of photos for others, each of which usually requires an irregular, often trial-by-error workflow. Most of these images are in very poor condition and are less than well photographed.
The "future project" was really a shortcut to say that i suspected that my client cannot open PSD on her machine and I wanted to have tiffs available for her.
I am afraid that i have not clearly described what i saw happen. And, it continues to occur with this single image after repeat tests of the same procedure. NONE of the other images in that folder, or any other image I have, responded in the way I attempted to describe. Probably user error-I guess I will never know!
In any case, I am very grateful that your had the time to respond.
vince

Why is the Insert Panel Missing from Dw CS6 Build 12 v 5861?

Why is the Insert Panel Missing from Dw CS6 Build 12 v 5861?

If Nancy's advice doesn't make it pop up as a window, you may have it set as a tool bar, in which case, hitting Ctrl+F2 will make the tool bar appear/disappear.
To turn it back into a floating panel, click and drag the dashed line on the far left of the Insert tool bar and pull it away from the top. You can leave it as free floating or drag it to another edge until it highlights the edge and drop it to dock it to whichever side of the screen you prefer.

Why are 3D objects incredibly small when exported from Photoshop CS6?

When I attempt to export 3D objects for use in Apple's iBooks Author software—say, a Collada 3D model of Earth for a children's science book—from Photoshop CS6, the object comes out impossibly small or completely invisible. It will work just fine in Photoshop, but if I view it in Finder using Quick Look, open it in Preview, or drop it into an iBooks Author project, the object appears so small that it's useless. No amount of scaling it in said software corrects the issue, either.
What happened? Is there a new export preset I'm missing? I used this exact same process in Photoshop CS5, and it worked wonderfully.
Thank you!

HI,
Am also having similar problem with exporting 3d model into ibook or iauthor.
Any help ?

How To use pen tool in adobe photoshop cs6

I want to know about pen tool in adobe photoshop cs6.
Just tring to create an attractive design and merge my photo with other photo .
Please help me to provide best answer .
[spam link removed]

Here's a great video tutorial by Colin Smith — one of the Kelby Training 'Photoshop Guys'
Everything You Ever Wanted To Know About The Pen Tool | No Stupid Questions with Colin Smith | Adobe TV
And this crib sheet should help you understand what is going on

I cannot upload fotos from Photoshop Cs6 or Lightroom 5 to Wordpress

I cannot upload fotos from Photoshop Cs6 or Lightroom 5 to Wordpress whatsoever. When I export with lightroom 4 trial, no problem.
Social media marketing is an important part of my business as a photographer, so it is very important for me to make this work.
Thank you for your help.
- Reinhard

The uploaded file has 389kb... Wordpress accepts everything up till 1mb
error message (see image) is german saying 'bei dem upload ist ein fehler aufgetreten. Probier es später nochmal.' In english should by something like 'there was an error while uploading. Try again later.'
is definitely a adobe problem, because I tried the exact same foto with same export settings, and it works well with lightroom 4 as well as photoshop cs5, but neither lightroom 5 nor photoshop cs6...

I can't open Bridge and Mini Bridge from Photoshop CS6 (64bit)

I can't open Bridge CS6 64(Bit) and Mini Bridge from Photoshop CS6 (64bit), I get an error message (APPCRASH ). I can open only Bridge (32bit) as a stand alone program.
Operating system Windows 7 (64bit).

http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Mylenium

How do you transfer pen tool drawings from Photoshop CS2 to Flash CS3?

I tried to copy and paste it but that didn't work.
I didn't want to redraw the entire picture in in pen again in Flash (so that I could later animate the drawing), so I was wondering how I could transfer the pen tool drawings from Photoshop to Flash?

helpmepleaze a écrit:
I have an old laptop with Photoshop elements 5.0 and wanted to move that program to my newer PC but the program was too old so I bought and loaded Photoshop Elements 13 on my PC. To import my photos from the 5.0 I did a full backup on a flash drive and then loaded the pictures to the PC with 13. The pictures are there but none of my collections from 5.0. I read the manual and said I was supposed to be prompted to convert old catalogs. I was never prompted and do not know how to transfer my collections in my catalog from 5.0 to the 13.
What you are doing is not only to install a newer version of PSE, it's also to migrate to a new computer.
The general solution is to do a full organizer backup on an external drive and do an organizer restore to the new computer (or new drive).
Use Backup, Restore to move catalog | Organizer | Elements 6 or later
The problem is that since PSE5 is an old version working with a different database engine, you must first use a conversion utility to create a PSE13 version.
http://helpx.adobe.com/elements-organizer/kb/convert-organizer-catalog-elements-13-64.html
So read that paper carefully, do the backup restore and conversion as described.

Printing from Photoshop CS6

Having problems printing from photoshop cs6 the colors are way off. How do you collebrate the printer to print whats on screen?

you are going to have to try and match your printer colors to the image colors. many questions involving color management and your settings in PS: is CMYK set? set your "printer handles colors"?
for color management:
1. calibrate and profile your monitor
2. set up an image color space
3. configure your printer driver for the print.
reference this link:
http://www.graphics.com/modules.php?artid=736&name=Sections&op=viewarticle
http://www.computer-darkroom.com/ps10_print/ps10_print_1.htm
take a look at the links-
-janelle

Converting to Photoshop CC from Photoshop CS6

If I convert to Photoshop CC from Photoshop CS6 will I have to uninstall the CS6 version or could it continue to run alongside CC?

If you want it can stay installed. It is installed in a separate folder, so they do not affect each other.

I can not longer print from photoshop CS6

I get an error message when I try to print from photoshop CS6
Nothing I've done has helped.

These suggestions are not the problem and I have contacted HP and they have run all the diagnostics and they say the problem is not with the printer or the software. All other browsers print, just not Mozilla

Crop Tool Missing From Photoshop CS6 Toolbar

Similar Messages

Maybe you are looking for