Croped image after using "Basic 3D Swivel"

Hello there,
I've used a "Basic 3D Swivel" effect on a picture and noticed that the top gets croped off.
Maybe someone has an idea on what's going on here.
Best,
T

*UPDATE: Problem solved.
Looking for a solution as well...
I figured out, that it's only getting cropped when the footage's size is equal to or greater than than that of the sequence.
In the picture at the top the sequence has a resolution of 1920x1080. Notice how the left video stays untouched while the right one gets cropped. The left one has a native resolution of 1280x720 while the right one is in 1920x1080.
/edit: Found a solution:
dradeke's workaround should work fine, as well. But if you don't want to nest your clip for whatever reason you might have: You just have to add a "Transform" effect ABOVE your "Basic 3D" one and do all the 'motion' related attributes (scaliing, position, etc...) with this one.
Message was edited by: unihumi

Similar Messages

Weird blocks on image after using adjustment brush in ACR

A group of people took an online webinar yesterday. The instructor is a heavy Adjustment Brush user, in LightRoom. After taking the class, many of the students in the group are reporting the appearance of weird blocks on images, after using the Adjustment Brush - both in LR and in ACR. It is also happening to me. I am a heavy Photoshop and ACR user - never before have I seen this. The only thing I'm doing differently is using the Adjustment Brush (because of the webinar class, as it was part of the instructor's core teachings). What could be causing this?

There was an adjustment brush bug in older versions of ACR. I first reported it here, and Eric Chan acknowledged the problem. It went away in future releases. Sorry, I can't remember what version numbers were involved.
http://forums.adobe.com/thread/928672
(see youtube demo)

How to save appropriate images and then discard the saved images after using.

Hi,
The attached program is used for gesture recognition and playing the corresponding audio file for each recognized pattern. It is saving all the images that are captured and is using in pattern matching. if pattern for "A" is captured ,then almost 10 to 15 intermediate images are captured along with pattern "A". If all are pattern matched then audio file of "A" will be played for 4 or 5 times which is not desirable. Also the images saved in the imaq write folder are getting piled up. They should be discarded after they are used up in pattern matching otherwise it would be a waste of system memory. Can anybody advice in correcting.
Thanking you.
Attachments:
program help.zip ‏721 KB

Hi,
The attached program is used for gesture recognition and playing the corresponding audio file for each recognized pattern. It is saving all the images that are captured and is using in pattern matching. if pattern for "A" is captured ,then almost 10 to 15 intermediate images are captured along with pattern "A". If all are pattern matched then audio file of "A" will be played for 4 or 5 times which is not desirable. Also the images saved in the imaq write folder are getting piled up. They should be discarded after they are used up in pattern matching otherwise it would be a waste of system memory. Can anybody advice in correcting.
Thanking you.
Attachments:
program help.zip ‏721 KB

Corrupt (weird?) images after using Safe for web?

Since upgrading to CS4 i noticed that a number of images saved with 'save for web' do not display in a browser? It happens for jpegs as well as gifs, and when i upload them to a server they won't display - not even if i use the direct link to the image. Instead, i see the file-name displayed in firefox. I also noticed that saving the same image with the same save-for-web-setting 2 times gives me a massivee discrepancy in filesize - like 60k for the one, and 1.8mb for the other?
Yesterday i uploaded a 'save-for-web'-image to Twitter, and Twitter told me that "...the image can't be used. Is it animated?" - the weirdest thing about this was that it was a jpeg - ever heard of animated jpegs?!
Anybody else noticed something like this? I've been working with both Photoshop as well as webdesign for more than 10 years, so i can assure you i know what i'm doing. I just don't know what to do about this issue?
Thanks for your help!
Hans

Have you tried trashing your Saving for Web preferences?

How do I expand my images after using a cover flow object?

Let me explain: I used nine images to group them under cover flow (object) and it looks nice on Ibooks Author, but now I want to tap to expand each image as they float and swipe back to revert to initial size.

In short, you'll want to hook into the interaction events fired by the Cover Flow object when manipulated by the user.
Each interaction fires an event. To see the possible events, select the Cover Flow and click the code button and you'll see the events you can intercept in the "Add Event Handler" drop-down menu including:
Did Tap Front Cell
Did Select Cell
Did Focus Cell
Did Begin Swipe
Did End Swipe
Showing a zoomed version of the center (focused) cell will vary based on how you want to present the focused content.
If you want to zoom the focused cell full screen, you can have an offscreen Image View object that you'll display when the appropriate event is triggered and set the image property of the Image View to that same image in the focused Cover Flow cell.
You'll then add a interaction for the zoomed Image View that hides the view when tapped to reveal the Cover Flow for further selection.
Bunch of different ways to do this. Check out the Photo Gallery page in the Space Tours To Mars sample in the iAd Examples folder available for download where you downloaded iAd Producer.
Cheers,
-Mark

Weird glitchy squares appear on image after using Adjustment Brush

in Camera Raw 6.1 (Canon EOS 5D Mark II) and opening in Photoshop CS5. The tetris treatment is then permanent on the image. I originally posted in the Photoshop forum, but they told me to come here. Any help would be much appreciated. Thank you.

Can you please send me the image and corresponding XMP file (with your image settings, so I can repro it): [email protected] You can use YouSendIt.com.

Issue with re-importing images after using Nik plugins

Currently, when images are edited in a Nik plug-in and saved back to Aperture, the project folder the image originated in is changed from being organized by "date" to "manual" and then that image is inserted as the first image in that folder. In past versions of Aperture, the image would be placed back into the project folder by date. At the very least I would like to have the control on where that image is placed. And my selection of how that project folder is organized should NEVER change unless asked.
Is there some hidden setting that can change this behavior?
Ken

Unfortunately, this issue was with some of the last versions of Snow Leopard as well. Oh, and for clarification, this happens with HDR efex. Others have commented that the Nik plugin is designed to work this way. Maybe, but I would like a choice where the image is returned. I believe it is a NIk issue but they won't admit it.
I did try your suggestion, but no luck. This image changed the project folder organization to "manual" and put the image first.
Ken

After using PS CS6 for well over a year, Bridge now will not open RAW images in Camera Raw, although

After using PS CS6 for well over a year, Bridge now will not open RAW images in Camera Raw, although Photoshop does. When I try to open them in Bridge, I receive a popup message that says that it "requires that a qualifying product has been launched at least once to enable this feature." Obviously, I have done so hundreds of times since installing and activating CS6. What gives, and how do I fix it?

Things have now become significantly worse!
Now when I try to open anything from Bridge, or try to open PhotoShop at all, I receive a popup that gives me 2 options: 1) License PS CC, or 2) continue with my trial of PS CC.
So far as I know, I have not downloaded any trial of anything from Adobe in many months. In fact, I have no interest in PS CC. I wish simply to use PS CS6.
I have uninstalled my Adobe Creative Suite 6 Design Standard, of which my PS CS is a part, and reinstalled it but I still am blocked from using my properly licensed programs.
Please advise.
Mike Hannisian

Images load really slow after using Reduce File Size...

After using the "Reduce File Size..." feature in Acrobat 9 on Windows Vista, some of the images load really slow as I page through the document. Is there some kind of compression setting that I should look for to prevent the images from be affected by this?
For some of my documents it will take 30 to 60 seconds to load an image. Sometimes I can't do anything with the document until the graphic loads entirely.

Can you post an example of a file that has this issue? Personally, I recommend using the PDF optimizer, it gives better control of the final pdf file.

Poor image quality using iMovie 8 or iDVD after importing DV file via FW

Hello,
i am a complete newby and asking for help. I have bought a Panasonic NV-GS320EG-S miniDV Camcorder. First i connected it via S-Video to my Pioneer Plasma which worked fine.
I have connected the camcorder via Firewire to my iMac 20/2,4 GHz, camcorder will launch import window, streaming works but in iMovie the image quality is already rather poor. I can cut files and all but after using Import film and burning it with latest Toast, picture quality is even worse, that means colors are natural but no sharpness, lots of shivering lines as soon as the angle is moving.
I've tried to import directly into iDVD with the direct transfer function for Firewire which works technically as well but the result is mainly the same, when i burn the DVD the picture quality gets far worse than via S-Video connection.
Last thing i tried is importing to iMovie, importing for media browser and reopening file in iDVD which burns the DVD later, all that works technically fine, but the image result remains absolutely poor, my wife meant inacceptable...
Any ideas what that could be??? I've always imported and exported the film with the largest picture mode possible...

I am using the Panasonic HDC-SD5 camcorder which records in AVCHD.
I also have a JVC miniDV camcorder.
The following is available in iMovie 08 help:If the larger sizes are not available, the original project media isn’t large enough to render in that size. The largest media size used in the project determines the final movie sizes you can render.
Tiny: Always 176 by 144 pixels.
Mobile: Always 480 by 272 pixels.
Medium: Varies in size from 640 by 480 pixels (standard aspect ratio) to 640 by 360 pixels (widescreen), depending on the size of the media in your project.
Large: Always 960 by 540 pixels (widescreen). No large size is rendered if your original video isn’t high definition (HD).

After using the minidisplay port to connect to a projector, my computer screen displays images with less resolution than before. How do I get back the usual sharp resolution?

After using the minidisplay port to connect to a projector, my computer screen does not have the usual sharp resolution. How do I get back that sharp resolution? The computer screen images are now a bit blurry.

Do you mean after the projector is disconnected? It should change back to normal after disconnecting. If it does not, go to System Preferences > Displays and move the resolution setting back to the largest number.

I am using adobe photoshop cs6. I am facing a problem. When i save any image as "save for web". After saving image it show cropped. An image show many parts of the image after saving the image. Please help me. Thanks in advance.

I am using adobe photoshop cs6. I am facing a problem. When i save any image as "save for web". After saving image it show cropped. An image show many parts of the image after saving the image. Please help me. Thanks in advance.

Just go back in photoshop and use the Slice Select tool, then just click and select the slice and hit delete - if you're not sure which one is the active slice just right click and find the one that has the Delete Slice option.
It's possible you either added the slices by accident or if you received it from someone they just had the slices hidden. For the future, you can go to View > Show > Slices to display (or hide) slices.

On an pci_mio 16e4 programming using nidaq & visual basic, after using AI_Setup analog sequential data accusition stops.To restart I use Init_DA_Brds This takes a long time, What must I reset to restore the analog sequential function?

on an pci_mio 16e4 programming using nidaq & visual basic, after using AI_Setup analog sequential data accusition stops.To restart I use Init_DA_Brds This takes a long time, What must I reset to restore the analog sequential function?
I belive that the trigger is being changed on the io board, but cannot manage to reset it.
The reset process takes in the order of 0.1 sec, and since this is a time critical application, i want to get the scanning function working again faster

Dear Ian. Thank you for your reply. The problem appears to be that the scan trigger(s) are stopped, or something, by the use of the AI_setup instruction. The sytstem works perfectly until this instruction is used. My problem is in understanding what has happened since the help seems to give no detail on any interconnection between the scan system and the external analog trigger system. I have tried to reconnect the triggers, but so far unsucessfuly

Photoshop CS6 shut down after using for 5mins; no image can be display on canvas.

Photoshop CS6 shut down after using for 5mins; no image can display on canvas.

Thanks for your help. Actually the problem was solved when turning off the GPU. In the mean time, I would like to upgrade my Video Card, too. My existing vedio card detials are as below. May I seek your advice on any good method other than replace it.

Sudden "unsupported image format" after using Dodge & Burn Plugin

After using Dodge & Burn plugin for first time (seems great) one of the images suddenly turned into "unsupported image format" in Aperture. Just happened to one but its a critical one so I need to figure it out. Any thoughts?
Thanks - Robert robert (at) robertholland (dot) com
<Edited by Host>

scott nichol wrote:
if you keep the console open when you're editing these photos and the "unsupported image format" message comes up, you'll notice that Aperture is throwing malloc errors on the console. this means that while its trying to load the image, it is running out of RAM. the core problem here is that Aperture can't address more than 2GB of RAM and i think the only way that Apple can address this problem is by moving to a 64-bit version of Aperture. it would be really nice if this issue was addressed in a 2.2 release sometime soon as this happens to me all the time now after round-tripping an image to Photoshop.
i would not expect to have to quit and restart a professional photography application every time i finish editing an image.
Good to know. But I don't expect a .2 upgrade to be 64bits, a next major version of Aperture is more likely to be 64bits (Aperture 3), considering AP 2 is at the end of its development cycle and a new major release is due before summer.

Croped image after using "Basic 3D Swivel"

Similar Messages

Maybe you are looking for