Cropped a jpg and did a "ctrl s" to save it but everytime I do, it wants to save as a .PSD, why?

Trying to crop a couple of hundred images.  Was using CS2 to do it but then I thought why not use CS6 to do it.  Opened a jpg, cropped it the way I wanted and did a ctrl s to save it, only to find it wants to save it as a psd.  Not cool.

Perhaps it's because you may not have "Delete Cropped Pixels" checkmarked if you use the Crop Tool in CS6.
Your background layer then turns into Layer 0, a floating layer, and cannot be saved as a jpeg, so PS saves it as a psd, becattuse that format supports floating layers.
How, where would one do that?  Checkmark the "delete cropped pixels"?  My background layer is turning to a Layer 0.
Thanks!

Similar Messages

  • I'm trying to export an ID image as a jpg and don't know how to save it at 1920 x 1080.

    Could use some advice on the following question:
    I'm trying to export an image as a jpg and don't know how to save it at 1920 x 1080.

    Thanks Eugene. I was taking the question literally—the OP wanted to directly save a .jpg at 1920x1080 from ID.
    If the ID document is set up as 1920x1080 pixels you could export as PDF and open into PS at exactly 1920x1080 by setting the res to 72 in the import dialog.
    Of course the converted PDF has no compression applied (at least to native ID objects) and would have some higher quality than an exported High quality JPEG.
    But the OP needs a JPEG and if you want to compare compression artifacts, you would have to save the opened PDF as JPEG, close and reopened. With PDF there is the option of saving the opened PDF with Maximum quality, which is probably better than ID's JPEG export High quality. But If I compare the 2 methods in a layered PS file it's hard to discern a meaningful difference. See Compare.psd in this zip
    http://www.zenodesign.com/forum/ExportTest.zip
    Direct
    PDF to JPEG

  • TS4006 I have iPhone 4 with updated latest iOS And i am using FIND IPHONE application. But everytime when ever i login in it and serch for the device its shows but never give me the location"NO LOCATION AVAILABLE".It is already connected with WIFI but no

    I have iPhone 4 with updated latest iOS And i am using FIND IPHONE application. But everytime when ever i login in it and serch for the device its shows the device  but never give me the location"NO LOCATION AVAILABLE".It is already connected with WIFI and i tried all the stuffs that has been written in the manual. Plese give me the Proper suggetion about this issue..!!

    If your router is not identified in a national database (don't recall who maintains it or where it is) then there is no location associated with it.  Hence your device cannot be located.  I suggest you try your test at some public wifi spot, like a bookstore or coffee shop.  These places usually have a location associated with their wifi router.

  • JPG and TIFF colors in Bridge CS5 way off, but fine in Photoshop

    Just started happening, but not sure if it was after updating to Bridge 4.0.3 or Camera RAW 6.2.  The colors for RAW and PSD files are fine in Bridge, but all JPGs and TIFFs colors are blown out and way off.  Opening the JPG or TIFF in Photoshop looks fine though.  Anyone else having this issue, or know how to fix it?
    Update:  If I set the "Develop Settings" in Bridge CS5 to "Camera Raw Defaults" for the JPGs/TIFFs that are displaying improperly, the colors and tones go back to normal, but if I "Clear Settings" everything turns to crap again.

    PLEASE  help save my sanity and my reputation!  --I have spent the last five days exhausting every possible solution to this debilitating issue. I have spent countless hours perusing the web for a solution, spent 4 hours yesterday with Adobe customer support and yet, there is no solution to be found. My issue is that the color (in every file format NEF, JPEG, PSD) completely changes color and desaturates in every one of the adobe products: Photoshop CS5, Camera RAW 6.2, Lightroom 3.2. -
    Everything was working fine, and then out of no where my productivity has come to a crashing halt. This is the steps I have taken to this point:
    -Uninstalling/re-installing all of the software
    -Purging anything that can be purged.
    -Changing color profiles
    -Resetting defaults
    -Resetting preferences
    -Installing updated drivers for monitor, video cards
    -rollling back drivers for monitor, video cards
    -monitor recalibration
    **and finally, today...I set the monitor up on another computer, OS windows xp, and to my complete surprise, the issue persists even on another pc with completely different hardware.
    -I am at my wits end with this. I have clients ringing my phone off the hook. This is crazy!
    -I have sent out for another monitor as a last ditch effort to see if something is wrong with the monitor.
    PLEASE, if anyone has a solution please let me know. Apparently, the folks at Adobe are just as perplexed by these issues as we are, as I have found numerous posts on forums throughout the Internet with this same issue---and yet none of the post every found a solution.
    Primary System
    Windows7 64-bit
    Nvidia fx 580 video card
    Dell U2410 Ultra Sharp Monitor
    Abobe CS5 Photoshop -64-bit
    Lightroom 3.2
    Camera Raw 6.2
    Secondary
    Windows XP
    Nvidia GeForce 8400gs
    Same software, just in a 32-bit

  • Some JPG and AVI files imported from camera to iphoto, but not all

    I just imported from camera to iPhoto using card reader and half the pics and a couple movies came over. The rest aren't recognized by my iMac, even though they say JPG and AVI and still run fine on camera. I installed Perian plugin a while back at the recommendation of one of you, which solved that problem and I just installed the recent update. I used time machine to restore old version, but that didn't work. I don't know if this is a Quicktime (v 7.4.1) issue or a problem with the flashcard. I tried opening via photoshop and iMovie. Photoshop CS3's message says "Could not complete your request because an unknown or invalid JPEG marker type is found." iMovie, when I try to drag movie into it says "The file could not be imported: ... Quicktime couldn't parse it: -2048". Hopefully one of you knows what is going on. Thanks!!!

    Are you running a "referenced" or "managed" library?
    Give this a try:
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
    2 -  select the library you want to add from those in the selection window.
    3 - make sure that in the rebuild window the checkbox  "Scavange orphaned photos" is checked.
    4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
    5 - in the next  window name the new library and select the location you want it to be placed. Click on the Create button.
    Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
    Note 2:  Your current library will be left untouched for further attempts at a fix if so desired.
    OT

  • I use iPad3 and used to buy and load free products on the App Store but recently any time I want to buy or download free apps, a popup will appear informing me that my apple ID has been disabled. I have changed my password many time, no diff. Help!

    My name is Amos. I use iPad3 64GB and have been buying and downloading from App Store but recently, each time I want to buy or down load apps from the store, I will receive a popup, "your apple ID has been disabled". I have made efforts to download to no avail and have also change my password severally and later my username and still I get the same message. Now, I can neither buy nor download free apps from the store. What do I do? I need help!

    Read the tips in this article and see if any of them work for you. You may need to contact iTunes Support in order to get this resolved.
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/apple-id- disabled

  • I just downloaded the newest itunes on my acer lap top and I also did a software update on my ipod, but everytime I try to plug my ipod in my computer itunes doesnt work and sync. Help!!

    I just downloaded the newest itunes software on my Acer Lap top, and also did a software update IOS 6.0.1 on my ipod thats 4th generation. Everytime I try to hook my ipod to the computer it doesnt work and I'm not sure why. Help!!

    What do you  mean by "it doesnt work"?

  • HT4059 I bought a book from Apple and it went on my new mini ipad but doesn't seem to want to download on my other ipad even though it is trying  and says downloading.

    I just downloaded a book on my new ipad mini. I have tried to put it on my big ipad but to o avail. It tries to, and says it is downloading but never finishes. I can't get it on my itouch either and that is fairly new. I did get it on my computer with no problem. It is a multi media book with paintings from MOMA and some audio for some paintings. What do I have to do? I even deleted it one time to start over.

    If he downloaded it on his iPad then it should have gone into the Music app - when their are audiobooks on an iPad then an Audiobooks option should appear on the More button at the bottom of the Music app. If he downloaded it on his computer's iTunes then it will have downloaded into the Books part of his iTunes library and he will need to sync it to his iPad via its Books tab (audiobooks are one-time only downloads, so he should take a backup copy of it).

  • HT5085 Hi, I purchased and paid for an app( Theory Test) before but I've been charged again. I don't know why?

    I don't know why I've been charged for an app although I paid for that before.

    It's the same app (e.g. it hasn't changed developers), you haven't changed countries since buying it, you are using the same account that you originally bought the app with ? And how did you redownload the app ? If you redownloaded it via the Purchased tab in the App Store app on phone then you shouldn't have been charged - try the 'report a problem' link to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • HT201263 I just got my iPhone 4 yesterday, and I went through the very first steps you have to when first setting up your iPhone, and I finish and it says I have no service and i have to restore my device? But my phone has been stuck on the Apple logo?Why

    My iPhone has been "frozen" for two hours now on the Apple logo, after me seeing a notification pop up and tell me I have to restore my device. And my device has been stuck since I started and does not seem to be making any progress besides vibratingf every three or so minutes. Why is this?

    I'm having this EXACT same problem with my iPhone 4, and I have the same computer stats (I have a Samsung Series 7)

  • Laptop did not sleep properly and did not like being stuffed in the laptop bag

    This morning I closed the lid on my laptop, saw that the sleep icon on the hinge came on, put the laptop in my bag, put it in the trunk of the car and went to work. Twenty minutes later I get to work and grab my bag. The bag was extremely hot! And when I flipped it open and touched the end of the laptop, it was even hotter. To the point where it did not feel good to touch.
    The exhaust fan end was at the top end of the bag and is the end that I was touching. The fan was going full speed.
    I brought it into the office, opened it and there was a DOS screen that listed all of the available boot devices and pretty much said nothing was available. I hit enter and it cycled through a couple DOS screens but basically it didn't want to do anything. So, did a hard shut down and let it cool down to where it was comfortable to the touch. Powered back on and was able to get into Windows fine. The battery was fully charged when I left the house but was down to 40%. By the time I got PC Wizard up, the internal temps had fallen back to normal.
    Got my W500 about a week ago. Wiped Vista Ultimate and replaced with Windows 7. For the most part, everything I need to work is working fine. Still have a few devices that probably aren't completely configured properly. I did this whole routine yesterday for the first time (to and from work) without any issues so I am a little confused what happened this time.
    Any thoughts? Anything I should look for? Specific drivers I need to update? I see a couple of threads around sleeping issues but haven't confirmed anything on my end. What steps should I take to make sure that the thing really did go to sleep before stuffing it in my bag again? 
    So far it seems OK but I can only imagine what might have happened if I had the fan end at the bottom of the bag, it was in the afternoon and 100 degrees and if my drive were a little longer. I think it would have been messy.
    Thanks,
    Matt
    Solved!
    Go to Solution.

    This was actually the problem but I just figured it out today (without seeing the RealStranger post).
    The problem has not happened again since the first time, but I've been pretty vigilant about making sure it is actually asleep. However, this morning as I was packing up to go to work, I had just put it to sleep and was in the process of turning off my cordless USB mouse (Logitech VX Nano FTW), when I heard the computer beep and saw that it had come out of sleep mode. I played with it a couple of times and sure enough, turning the mouse on and off triggers it to wake up.
    I haven't actually changed any settings yet (since I just saw this post) but I will shortly.
    Thanks! I can quit worrying about it now.

  • I have cropped a clip and now want to take other clips from the remaining footage.  But the discarded footage which contains other desirable clips is not in Trash.  So, where did it go so I can access it?

    I have cropped a clip and now want to take other footage from the discarded remains of the clip.  But the discarded footage is not in my iMovie trash.  Where did it go?  And how do I rescue it so I can edit the other short clips from it that I need?

    I don't know how it did it (because I cannot duplicate the results) but one time the finder found a folder on my main hard drive called/Volumes Under that folder are folders called the names of previous external hard drives with numbers following them. /Volumes does not appear on my Mac hard drive. Obviously it is hidden somewhere. But it has content. Most of the time, the file names in that content don't show up in a search, but obviously I have found the content and deleted one huge folder of stuff it has saved. When I found the folder, I immediately opened it, where I found this stuff. But unfortunately when it opened in the search window I went directly to the "drive" folder and had no back arrow, so I couldn't get back to the search that found the content and the mystery /Volumes folder. The finder information window does show /Volumes directly off of the main drive (its not in any other folder). Anybody know where this stuff is hidden or how to get to it.

  • Is it possible to ignore and not import JPG files when a JPG and raw file of the same name exist?

    Is it possible to ignore JPG files on import? I shoot raw + JPG and see no reason to keep the JPGs; I shoot JPG primarily as a backup (I back all the JPGs up online to my smugmug account then delete them before importing the raw files), but they're also occasionally handy if one wants to get a quick print in the field. I know that one can set a preference to "Treat JPEG Files Next to Raw Files As Separate Photos", but even then they still are imported.
    As an example, say I have this scenario (not on DSLRS, but on pNs cameras, sometimes a JPG but not raw is captured - I suspect this has to do with how the buffer is filling) with these files on a memory card:
    IMG_0001.JPG
    IMG_0001.CR2
    IMG_0002.JPG
    IMG_0003.JPG
    IMG_0003.CR2
    When I import pictures from this folder, I'd like 2 CR2 files and 1 JPG to be imported. I'm even willing to copy the relevant files and drag and drop them onto LR's Library module. But even if I do that, all five files get imported. Thanks!
                         Dilip

    jim01403 wrote:
    trshaner wrote:
    For this typical example 98% of the image files are transferred while LR is building previews, which is exactly what I was suggesting be avoided.
    No, I don't believe that's correct. As I said in my previous post, Lightroom's Import is a two-stage process.....first copy the files from the card, then when that is finished, render whatever previews have been requested.
    AFAIK there is nothing unusual about my system, Lightroom has always imported in this two-stage way as far back as I can remember. Based on this I see no 'safety' benefit from copying files first outside Lightroom, then using an ADD import process. On the contrary, as this takes away the possibility of using the "Second Copy on Import" option, as well as having to manually setup import folders, I see nothing but downside from that approach.
    Mea culpa, Jim is correct! I checked my Windows 7 system with LR4.2 and I monitored the 'Destination folder' during an import direct from memory card to hard drive. 'Copy and import' showed in the progress bar until all image files were visible using Windows Explorer in the 'Destination folder.' Only after all files had transferred did the progress bar change to ‘Render 1:1 Previews.’ I started using LR1.0 on a Pentium 3 single-core system with Windows XP 32 bit, which I think is when I made this observation. Regardless, it is clear that LR4.2 is using a two-step import process. Thanks Jim for being persistent!
    It still begs the question why some people are experiencing very slow imports, damaged image files, and other related import problems from memory cards? My guess (and it's only a guess) is that they have 1) 'Rename Files,' 2) 'Automatically write changes into XMP,' or 3) 'Include Develop settings in metadata inside JPEG, TIFF and PSD files' checked in LR preferences. It would be a good idea for anyone experiencing import issues to try an import with these three (3) options unselected.
    My apologies to the OP DBarman for going off topic. Hopefully the extra information and observations are helpful.

  • I scanned documents to my macbook pro and it popped up on my screen so I know it was done correctly. I'vd saved as (pdf and jpg) and when I try to open in documents I can't. It shows it there but I can't open it...what do I do?

    I scanned documents to my Macbook Pro and it popped up on my screen so I know it scanned properly.  Then I did a "save as" and I tried as a pdf & a jpg and then when I go to my documents it won't allow me to open.  It shows it there but it is grey and not in bold black so when I click on it I can't open it.  I know nothing about computers so Help me please!!!!

    Repair permissions - http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.

  • JPG and RAW files are not grouped together.

    I am finding that my RAW and JPG files are not grouped together.  They show up on the Grid View as JPG for the JPG file and RAW + JPG for the NEF(RAW) file.  This does not seem to be consistent through out the folder.  Some of the pictures are grouped together and others are not.  The ones that are not grouped together have been auto-stacked and then unstacked.  I am not sure if this is what caused the seperation of JPG and RAW files.  I did try to take a picture that I had auto-stacked it  and then remove it and it did not sepearate.  The "Treat JPG files next to raw files as seperate photos" option is turned off, like it is in my Lightroom 3.

    This is what I'm talking about:
    Show subfolders are on:
    In windows Explorer:
    In the Import Dialog:
    Where are the files?
    If I click on the Folder 2014_12_14... all the files from all folders will populate.

Maybe you are looking for