Cropped images in slideshow

I have a 27" Imac w/ 1 tb hd, and 10 gig ram. I am running Aperture 3.1.3.
When I create a slideshow with places or shatter, images are randomly cropped. I have tried this When I use Boinz Photo Presenter, My images are fine.

Even when I edited the mask by using the "edit mask" slider, I wasn't able to get the entire image into view. These images were coming in from Illustrator, with transparent backgrounds. When I added a plain white box behind each image, I was able to pull the entire image in without the cropping effect. Still, I'd like to be able to get images into the widget without having to do this extra step!

Similar Messages

Image only slideshow in premiere pro cs5.5

Hi all,
Newbe question. I want to create an image only slideshow but not sure how to go about setting this up. All the sequences are set up for use with video (as i would expect).
I guess what I'm asking is what default sequence settings should I use and what size should I crop my images to before importing them into premeire pro. If it's make any difference i will just be creating video's to go on youtube.
Thanks in advance
James

You're welcome.
There are 7 more very informative videos on the same page...
a quick crash course for people who are unfamiliar with some
of the basic functions that make your editing life much easier.
Frequently Asked Questions

How do I save a photo after I have zoomed in on it? I want to save the zoom-in as a new photo and can't work out why this doesn't work the same way saving a cropped image, or adjusted image does. Thank you.

How do I save an image after I have zoomed in on it? I can't work out why I can't save a zoom-in the same way
I can save a cropped image or an adjusted image. Thanks, Lily A.

Hi Matt, thanks for your reply. Have realised that Zoom in Iphoto is just a viewing tool and not an editing tool.
Was creating beautiful abstractions by zooming in and wanted to create a new image of the result. Have since discovered that cropping after zooming takes me a little way to where I want to go but it isn't the same effect. Will perhaps have to try to create it when actually shooting. Am doing a photoshop course in February and maybe will learn a bit more then, too. Am pretty much an amateur just finding my way.
Thanks again,
Best, Lily

Cropping Images with Clipping Masks | Learn Illustrator CS6 | Adobe TV

In this video you will learn a quick and easy method for cropping images in Adobe Illustrator CS6 and CS5. Using clipping masks allows you to retain the area of the image you cropped out as well as modify the clipping path later on.
http://adobe.ly/V8tW7S

Is there a way to make a clipping mask for a many-layered image without collapsing all the layers? I'd love to keep my image as is (it's quite complex), I just want to crop the entire thing.
thanks!

Cropping Images with Opacity Masks | Learn Illustrator CS6 | Adobe TV

In this video you will learn a versatile method for cropping images in Adobe Illustrator CS6 and CS5. Using opacity masks allows you to retain the area of the image you cropped out, modify the clipping path later, and use complex blending modes, transparencies, and knockout groups.
http://adobe.ly/V8tTZD

Firstly great tutorial.
Anyway I initially started a thread in the forums which lead me here regarding the use of opacity masks, I'm having real problems finding a solution to my specific problem.
I've got 2 issues I'm trying to solve, the first is how do I show just a portion an object above another even though it sits in a layer behind.
The second is I have an object with a linear gradient applied and I want to add yet another gradient just to a certain part of that object in order to make it fade out in a certain way.
I've spent hours pouring through the help topics but nothing seems to fit my exact problem, sorry for asking questions here but I'm really stumped and I think an opacity mask would do the trick, I'm just not sure how to execute it.
Thanks heaps.
http://forums.adobe.com/message/5125695#5125695

Change position images in slideshow

Hello,
I am trying to change the position of the images in my slideshow, but I don't know how I can do this.
Does anyone have an idea?
Thanks in advance!

You can resize and reposition both the Hero Image container and the Image inside that (by double-clicking the Hero Image).
Although your Hero Image size/position is fixed for all the images in slideshow, you can definitely move/resize the actual images inside individually. See if that helps you get it to work for you in the Slideshow itself.
Else you can always for go the Composition Widget which allows you to place individual target slides in different positions and have different sizes.
Cheers,
Vikas

Putting a border on a cropped image/video in FCE 3.5

Hello folks, my first post so be gentle.
Can anyone tell me how I can put a border on a cropped image or video clip in FCE 3.5?
At the mo if I want a border on a PIP I need to scale it down then make the border thicker, it meens the area that I want to see in detail (the PIP) is smaller than it is in the main window.
So cropping is the obvious solution but when I do the border gets cropped out too.
I could do it with miltiple layers but it seems a messy workaround.
Cheers
Craig

Please excuse me for horning in. Andy's instructions specify this plugin is for Final Cut Pro. Do you know if it is also good for Final Cut Express?

Why are my cropped images not printing at the size I have cropped them to?!

Hey!
I know how to crop images to specific sizes using either the rectangular marquee or crop tool. However, I am needing to print a number of small images, so want to compile them into one document to save paper. Once the image is cropped, it shows up in 'image size' as being the required size, however, when I copy and paste it into another document in an attempt to arrange it on a page with other cropped images, the images come out at about half the specified size when I print them.
Is it to do with the view I am using, because it doesn't seem to matter whether I set it to 'print size' or 'actual pixels'?
I can't seem to find an answer to this, and I'm sure that I didn't have a problem with this when I was using photoshop more regularly a few years ago!

Hello,
You need to ake sure the target document and the source documents have the same"resolution", in other words the same PPI.
You could also use the Edit>Place command, which will respect the print dimensions of the source photo, but import it as a Smart Object.
CB

How do I import images in slideshow with the caption?

I imported images in slideshow. but I have to write down in each field the caption of the image. is it possible to import the caption as well?
thanks for response

Hi
I am afraid, its not possible to import "Captions" within Adobe Muse. You need to manually type in caption for each individual image.

How to replace images in slideshow?

I would like to replace images in slideshow, but I can see only ADD option.

Thanks Parikshit.
Looks the trick would be to turn on Thumbnails, delete the image and turn it off.

Soft images in Slideshow

When I go to view my images in View>Slideshow they are very soft almost blurred. The thumbnails are fine as are the preview images in Bridge.
If I left click on the image in slideshow and zoom on the image it becomes sharp, when I right click to zoom back to full image it becomes blurred again.
This is very annoying as I have used the manual slideshow in CS3 to quickly assess and rate my images with no problems.
What am I doing wrong? Please help

Most of the problems in slide show are realated to the video card or driver. Make sure you have the latest driver installed.
If this does not work in advanced preferences click "use software rendering" and see it that solves problem.

Blank images in slideshow

I have just downloaded iphoto 11. I am able to see thumbnail pictures, but am unable to see images in slideshow. I only see blanks. Anyway round the problem?
Imatong

Are you able to see the full sized images of those photos in the Event or Photos mode? If not what do you see?
If you see just a blank window or this image in the window:
Then try the following:
If you have the space available on your hard drive and don't aready have a backup copy of the library make a temporary, backup copy (select the library and type Command+D) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Poor quality images on Slideshow

Hello all,
I recently downloaded Aperture from the Mac App store - seemed to good a bargain not to and I was already considering upgrading from iPhoto 08.
I imported all my pictures (along with the captions) into Aperture and created a slideshow from an album. I was quite disappointed to see that the image quality was really poor and very grainy. The photos themselves were fine in the album - but not so in the slideshow.
I thought this may have been down to importing from iPhoto, so I experimented by adding other images directly into Aperture. The same slideshow quality issue arose. I also possess a MacBook Pro and decided to re-perform the steps described above. The images and slideshow are absolutely fine on my MacBook pro.
I wish to maintain my photo library on my main iMac and will be very downhearted if Aperture cannot give me the same picture quality on slideshows that I achieved in iPhoto. Can anyone help me figure out why I'm suffering from poor quality images in slideshows on my iMac?
Thanks in advance,
Simon.

Hi Simon,
Aperture uses the image Preview in Slideshows:
_About Displaying Sharp Images in Slideshows_
To display slideshows at the best quality, you should set Aperture to create high-resolution previews. In addition to setting previews to their highest resolution, you should also use full-size previews to prevent upscaling with large displays. If previews are not available, images in the slideshow may not be as sharp as they would be otherwise. For more information about creating high-resolution previews, see Working with Preview Images.
From the [User Manual|http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=21%26se ction=2]
What size Previews do you have?

Border on Cropped Image

I have a cropped image moving across the screen over a background. I know that I can add a drop shadow but can I add a color edge and how?

This will do what you want. Notice the border option.
--Bob
http://web.mac.com/andymees/Freeand_Easy/main/Entries/2007/1/30_Andy’s_SimpleCrop.html

URGENT HELP plz! crop image

I have an image
when loaded into my program, i have the getScaledInstance to about half of the size
and then i want to crop on that scaled image icon, how can i do that?
i tried the crop image filter, but it always need to getImage().getSource() which require the cooridnates of the original image (non scaled one)
i do not have the cooridnate of the original image, i just have the scaled image coordinate part for cropping. How can i crop?

Hey, here's some code:
          URL url = getClass().getClassLoader().getResource("some_image.jpg");
          Image rawImage = ImageIO.read(url);
          Image bufferedImage = new BufferedImage(X, X, BufferedImage.TYPE_INT_ARGB);
          // Perform your scaling here.
          bufferedImage.getGraphics().drawImage(rawImage, 0, 0, X, X, X);
          MediaTracker tracker = new MediaTracker(this);
          tracker.addImage(bufferedImage, 1);
          tracker.waitForID(1);
          Image cropImage = bufferedImage.getSubimage(X, X, X, X);Is this anymore useful to you?
Warm regards.

Cropped images in slideshow

Similar Messages

Maybe you are looking for