Cropping and Transforming on 16:9 to 4:3 with Pillars

I currently use a Canon XH A1 in HD mode to capture 8/Super 8 film. As you know this old film lines up more closely to 4:3, so I have to crop it in final cut X, and use transform to center it. I have beeen mostly been eyeballing it for center, but that can be off a bit or a little.
My question is, how can I make my viewable image size consistent across all the film I crop and transform. Is there an overlay that can give me the exact dimensions every time?
I can use the transform to enlarge, or crop to shrink if necessary, I just want the pillar boxes to be in the same place all the time. Any help would be appreciated.
I am using 10.0.6. Disgesting first with Imovie and then importing the Imovie Event Library from within Final Cut X.

you could do the math once on one clip.. Then write down the numbers and enter them into the transform x/y fields.
Should be faster than eyeballing each and every...
i.e the center of of a 1920x1080 is 960 & 540

Similar Messages

How to i get rid of the black boxes at the side of my video? Crop and transform won't work

Hers an example, i can't get rid of them!

What are the exact specs of your media? What are the project properties? It looks as if you've edited into the wrong size project. You might be able to copy and paste into a project of the right size.

Is there a way to adjust crop borders on Crop and Straighten?

I'm trying to use Photoshop CS3 to crop and straighten images of postage stamps. E.g., place a bunch of stamps on the scanner bed and scan them as one image. Then use Automate/Crop and Straighten Photos to create separate workspaces each with a single stamp image, cropped and rotated appropriately. This almost works; the problem is it often crops the stamps too closely, cutting off the perforations. The rotation is not always perfect either. For example, for the above image I get:
These two are pretty good except the perforation tips are trimmed off.
This one is a disaster
So I'm thinking if there were some way to specify how tightly the images are cropped, it might help solve the problem. Any other suggestions?

We now have a solution.
http://forums.adobe.com/thread/778507?tstart=0

Crop and Straighten Images Settings

I'm trying to use Photoshop CS5 to crop and straighten images of postage stamps. E.g., place a bunch of stamps on the scanner bed and scan them as one image. Then use Automate/Crop and Straighten Photos to create separate workspaces each with a single stamp image, cropped and rotated appropriately. This almost works; the problem is it often crops the stamps too closely, cutting off the perforations.
Here are a few once cropped.
So is there a way to set the border? Thanks in advance.

Using paths and the stroke paths function, like in this video, should get you
decent results with the crop and straighten function.
Look down the page under CS2 and Crop and Straighten updated:
http://www.russellbrown.com/tips_tech.html
This:
To this:
MTSTUNER

When placing a PDF created with Distiller, I only get Crop and Media as import options -- I need it to crop to the Trim! PLEASE HELP!

I'm having a MAJOR problem placing PDF files in InDesign CS4...
When I try to place a PDF that has been created in Distiller, the ONLY import options I can choose are CROP and MEDIA. I need it to crop to the TRIM, but that option is grayed out. The PDFs I'm trying to place were created in-house, and converted from Post Script files to PDFs using Distiller. We use PDF/X-1a equivalent settings when creating our PDFs.
If I export the file as a PDF and then try to place it into a CS4 file, I am able to select Trim as an option.
ALSO, if I open the Distiller PDF in Acrobat and then save it (without changing anything), I am able to select Trim as an option. A workaround I have found is to open all of the PDF files in Acrobat, save them to my desktop, and then save over the ones I need to place. Here's the problem with that: I work for a publishing company, and need to place hundreds of ads for each issue of our publications, and it adds a lot of time if I have to go and re-save everything just to be able to place all the ads.
Does anyone know how to fix this problem? I need to get this figured out so we can use CS4 for all of our publications again. -- We've gone back to using CS3 until I can get this figured out...
- Valerie

Steve,
Thanks for the reply, but my PDFs all have trim boxes on them. If I try to place the same PDF in InDesign CS3, it gives me Trim as an option. Also, if I open the PDF and save a copy to my desktop, I am able to select Trim as an option when placing the PDF, and I didn't change anything about it.
I've been trying to see if it's something with the Print Preset settings I'm using, but I can't find anything that seems like it would affect how InDesign would read the Trim area of the PDF.
I've attached 2 PDF files. One that was created with Distiller, and one that was exported from InDesign CS4. The Distiller one doesn't show Trim as an option in CS4, but the exported one does.... but they started out as the same ad. Ugh! Help me please!
- Valerie

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

16bit? Pixels extending beyond the canvas? (from a crop with delete unused pixels turn off). Have you previously been saving PSD files?
IME you sometimes have to tell Photoshop that the first save of a session is JPG, and it remembers from there on. The way to 'tell' Photoshop that JPG, or PDF, or PNG etc are now your preferred format is to Ctrl (Cmd) click on that format in the Save As drop down list. So long as the file does not have parameters that your chosen format does not support, then this should work for you.
[EDIT] Just noticed that you did include 'Crop' in the subject line. Do you have 'Delete cropped pixels' checked?

Crop and Zoom

I want to crop and/or zoom into a corner of a clip in my project, and then slowly zoom back out to show the entire clip. But I can't figure out how to accomplish this. When I use the crop or clip effect, it remains for the length of the clip. To give you an idea of what I mean, there is a car that starts on the left side of the clup and goes out of frame after a few seconds, so I want to avoid showing the car by starting with a zoomed in view of the right side of the clip.
How can I zoom in on portion of my clip, then back out again?
Thanks!

As John Nash points out, your Zoom and Pan can be easily done via Keyframing the Fixed * Effects>Motion>Position (Pan/location), and Motion>Scale (Zoom). Be sure to read his graciously furnished link completely, and if you do not understand any terms in it, and cannot find a useful definition of any, drop back with any questions.
As John notes, many/most Effects can be Keyframed to change over time. There ARE some exceptions, but not that many.
* Fixed Effects are those that are automatically applied to all Video Clips (Volume is a Fixed Effect, added to any Audio), and will always be there. Motion, contains Scale and Position, the two that you will use here. One adjusts these most easily and effectively from the Effects Control Panel, which is invoked by hitting Edit Effects in the Effects Tab, with that Clip Selected. Other Effects are first added from the Effects Tab.
Steve's tutorials and articles are great resources, as well, and come highly recommended, along with John's link.
Good luck, and happy editing,
Hunt
PS - as Keyframes are so very useful and powerful, and can be used in so many cases, I urge one to learn the concepts. Though time might need to be invested, it will pay great dividends later.

PSE 11 editor has stopped importing from scanner, no longer permits drag and drop, will not permit cropping, and other bizarre issues

Windows 8.1, PSE 11
I am having a number of issues including loss of import functionality from scanner, I can't drag and drop photos into the editor any more as well, or at least not after the first one. The crop function stops working after the first couple of photos. Then some freezing. A little added crashing. A plethora of other bizarre issues as well. This just stated happening a couple of days ago.
What I have tried:
Uninstall/Install.
Deleted preferences both before opening Editor (crontrol-alt-delete) and after opening it.
Kindly advise. Thanks!
Adobe Photoshop Elements Version: 11.0 (11.0 (20120830.r.32025)) x32
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 8
Processor speed: 3500 MHz
Built-in memory: 8139 MB
Free memory: 5185 MB
Memory available to Photoshop Elements: 3255 MB
Memory used by Photoshop Elements: 70 %
Image tile size: 128K
Image cache levels: 6
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1440, right: 2560
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 660 Ti
Driver Version: 9.18.13.3750
Driver Date: 20140327000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 2560 x 1440 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 660 Ti
Video Card Memory: -2047 MB
Application folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\
Temporary file path: C:\Users\evan\AppData\Local\Temp\
Photoshop Elements scratch has async I/O enabled
Scratch volume(s):
Startup, 931.2G, 805.4G free
Required Plug-ins folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\Required\
Primary Plug-ins folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\Plug-Ins\
Additional Plug-ins folder: not set
Installed components:
   ACE.dll   ACE 2011/03/29-16:11:44   63.457850   63.457850
   adbeape.dll   Adobe APE 2011/01/17-12:03:36   64.452786   64.452786
   AdobeLinguistic.dll   Adobe Linguisitc Library   5.0.0
   AdobeOwl.dll   Adobe Owl 2012/06/20-18:39:56   4.1.9   78.509892
   AdobeOwlCanvas.dll   Adobe Owl Canvas   3.0.68   61.2954
   AdobePDFL.dll   PDFL 2011/03/29-16:11:44   63.378681   63.378681
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654
   AdobeXMP.dll   Adobe XMP Core 2010/10/12-08:45:30   63.139439   63.139439
   AdobeXMPFiles.dll   Adobe XMP Files   5.0   61.134777
   adobe_caps.dll   Adobe CAPS   4,0,42,0
   Adobe_OOBE_Launcher.dll   Adobe OOBE Launcher   2.2.0.4 (BuildVersion: 2.2; BuildDate: Wed Apr 27 2011 21:49:00)   1.000000
   AGM.dll   AGM 2011/03/29-16:11:44   63.457850   63.457850
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   1.486530
   aif_ogl.dll   AIF   3.0   1.486530
   amtlib.dll   AMTLib   4.2.0.4 (BuildVersion: 4.2; BuildDate: Wed Apr 27 2011 21:49:00)   1.000000
   amtservices.dll   AMTServices   4.2.0.4 (BuildVersion: 4.2; BuildDate: Wed Apr 27 2011 21:49:00)   1.000000
   ARE.dll   ARE 2011/03/29-16:11:44   63.457850   63.457850
   asneu.dll    AsnEndUser Dynamic Link Library   1, 7, 0, 1
   AXE8SharedExpat.dll   AXE8SharedExpat   3.3   49.279053
   AXEDOMCore.dll   AXEDOMCore   3.3   49.279053
   AXSLE.dll   AXSLE   3.3   49.279053
   Bib.dll   BIB 2011/03/29-16:11:44   63.457850   63.457850
   BIBUtils.dll   BIBUtils 2011/03/29-16:11:44   63.457850   63.457850
   boost_threads.dll   DVA Product   5.0.0
   cg.dll   NVIDIA Cg Runtime   2.0.0015
   cgGL.dll   NVIDIA Cg Runtime   2.0.0015
   CoolType.dll   CoolType 2011/03/29-16:11:44   63.457850   63.457850
   data_flow.dll   AIF   3.0   1.486530
   dvaadameve.dll   DVA Product   5.0.0
   dvacore.dll   DVA Product   5.0.0
   dvaui.dll   DVA Product   5.0.0
   ems.dll   Elements Organizer   11.0
   ExtendScript.dll   ExtendScript 2010/03/05-08:21:15   61.423205   61.423205
   FaceDetector.dll   FaceDetector 0000/00/00-00:00:00   2.0.1.1   2.0.1.1
   FileInfo.dll   Adobe XMP FileInfo   5.0   61.134777
   filter_graph.dll   AIF   3.0   1.486530
   hydra_filters.dll   AIF   3.0   1.486530
   icucnv36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896
   icudt36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896
   image_compiler.dll   AIF   3.0   1.486530
   image_flow.dll   AIF   3.0   1.486530
   image_runtime.dll   AIF   3.0   1.486530
   JP2KLib.dll   JP2KLib 2011/03/29-16:11:44   63.196876   63.196876
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   MPS.dll   MPS 2011/05/24-09:45:42   63.464027   63.464027
   MSVCP100.dll   Microsoft® Visual Studio® 2010   10.00.30319.1
   MSVCP71.dll   Microsoft® Visual Studio .NET   7.10.3077.0
   MSVCR100.dll   Microsoft® Visual Studio® 2010   10.00.30319.1
   MSVCR71.dll   Microsoft® Visual Studio .NET   7.10.3052.4
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop Elements Editor   11.0
   platform.DLL   Adobe Help System   1, 0, 0, 1
   Plugin.dll   Adobe Photoshop Elements Editor   11.0
   PSArt.dll   Adobe Photoshop Elements Editor   11.0
   PSViews.dll   Adobe Photoshop Elements Editor   11.0
   ScCore.dll   ScCore 2010/03/05-08:21:15   61.423205   61.423205
   shfolder.dll   Microsoft(R) Windows (R) 2000 Operating System   5.50.4027.300
   Tbb.dll   Intel(R) Threading Building Blocks for Windows   2, 2, 2009, 1011
   updaternotifications.dll   Adobe Updater Notifications Library   2.0.0.15 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   2.0.0.15
   WRServices.dll   WRServices Thursday January 21 2010 12:13:3   Build 0.11423   0.11423
Required plug-ins:
   Accented Edges 12.0
   ADM 3.11x01
   Angled Strokes 12.0
   Auto Divide 11.0.0.0 (11.0 (20120830.r.32025))
   Average 12.0.2
   Bas Relief 12.0
   BMP 12.0.2
   Camera Raw 7.4
   Chalk & Charcoal 12.0
   Charcoal 12.0
   Chrome 12.0
   Clouds 12.0.2
   Color Halftone 12.0.2
   Color Variations 12.0.4 (12.0.4x001)
   Colored Pencil 12.0
   Comic NO VERSION
   CompuServe GIF 12.0.2
   Conté Crayon 12.0
   Correct Camera Distortion 12.0.2
   Craquelure 12.0
   Crop and Straighten Photos Filter 12.0.2
   Crosshatch 12.0
   Crystallize 12.0.2
   Cutout 12.0
   Dark Strokes 12.0
   Difference Clouds 12.0.2
   Diffuse Glow 12.0
   Displace 12.0.2
   Dry Brush 12.0
   Extrude 12.0.2
   FastCore Routines 12.0.4 (12.0.4x001)
   Fibers 12.0.2
   Film Grain 12.0
   Filter Gallery 12.0
   Fresco 12.0
   Glass 12.0
   Glowing Edges 12.0
   Grain 12.0
   Graphic Novel NO VERSION
   Graphic Pen 12.0
   Halftone Pattern 12.0
   Ink Outlines 12.0
   Lens Blur 12.0
   Lens Flare 12.0.2
   Lighting Effects 12.0.4 (12.0.4x001)
   Liquify 12.0.1
   Matlab Operation 12.0.4 (12.0.4x001)
   Mezzotint 12.0.2
   MMXCore Routines 12.0.4 (12.0.4x001)
   Mosaic Tiles 12.0
   Multiprocessor Support 12.0.4 (12.0.4x001)
   Neon Glow 12.0
   Note Paper 12.0
   Ocean Ripple 12.0
   OnEdge 1, 0, 0, 1
   Paint Daubs 12.0
   Palette Knife 12.0
   Patchwork 12.0
   Pen and Ink NO VERSION
   Photocopy 12.0
   Picture Package Filter 12.0.4 (12.0.4x001)
   Pinch 12.0.2
   Pixar 12.0.4 (12.0.4x001)
   Plaster 12.0
   Plastic Wrap 12.0
   PNG 12.0.2
   Pointillize 12.0.2
   Polar Coordinates 12.0.2
   Polar Coordinates 12.0.4 (12.0.4x001)
   Poster Edges 12.0
   Radial Blur 12.0.2
   Read Watermark 4.0
   Reticulation 12.0
   Ripple 12.0.2
   Rough Pastels 12.0
   Save for Web & Devices 12.0
   ScriptingSupport 12.0.4
   Shear 12.0.2
   Smart Blur 12.0.2
   Smudge Stick 12.0
   Solarize 12.0.2
   Spatter 12.0
   Spherize 12.0.2
   Sponge 12.0
   Sprayed Strokes 12.0
   Stained Glass 12.0
   Stamp 12.0
   Straighten and Crop Image 12.0.4 (12.0.4x001)
   Straighten Image 12.0.4 (12.0.4x001)
   Sumi-e 12.0
   Texture Fill 12.0.4 (12.0.4x001)
   TextureSelect 12.0.4 (12.0.4x001)
   Texturizer 12.0
   Tiles 12.0.2
   Torn Edges 12.0
   Twirl 12.0.2
   Underpainting 12.0
   Water Paper 12.0
   Watercolor 12.0
   Wave 12.0.2
   WIA Support 12.0.4 (12.0.4x001)
   Wind 12.0.2
   ZigZag 12.0.2
Optional and third party plug-ins:
   Frame From Video 6.0
   Magic Extractor 12.0.4 (12.0.4x001)
   PhotomergeUI 12.0.4 (12.0.4x001)
Plug-ins that failed to load: NONE
Installed TWAIN devices: NONE

Final Update: ...god willing...
OK! Check it, like I said in previous posts I seemed to have narrowed it down to specific mp3s not converting and playing in their native sample rate which if paired with another sample would give you the "audio midi sync" error and basically screw up your clock! It appears mp3 files converting to mp3 using iTunes would not convert to the correct sample rate if set to something other than 44 in logic and cause this. A tad peculiar Apple iTunes won't work with Apple Logic. I was able to confirm this on two mac's via my friend in Florida. He's running Tiger and tried the same experiment and Booya! Mickey Mouse! It appears this insane week long adventure has came to an end (...god willing) with a super specific unlucky shot in the dark on my part finally revealed to be an perfectly normal function of Logic (obviously one i'm not fond of..) As far as the errors / crashes / system overloads / kernal panics I think I can sort those out to the mackie onyx satellite not being a good choice and trying to add and remove firewire devices in the middle of the sample rate mayhem. Wow! all I can say is, I'm glad it's over
Wish me a lot of luck in the future.. I'm sure i'll need it!

Changing the Color of Crop and Bleed Marks from Registration to Black

Hello all,
I have been searching the web and have tried numerous things but I can't seem to solve this problem. In InDesign crop marks and bleed marks are printed in "Registration" color. I understand why that is needed for plate printing. However I am laser printing and I need those marks to be in "Black" color. I have tried to edit the cropmark script by changing "Registration" to "Black" on the line with myRegColor. I have tried changing the printer setting to "Pure Black". However I can't get the crop and bleed marks to print in "Black". I have been on various websites and while there are people asking the question I haven't found a answer that works. I have searched this community as well but haven't found an answer that I understand. Before I manually make crop marks I want to make sure I am not missing something completely obvious.
With laser printing there is a different charge for color and B&W. The fact that the crop marks are coming in as color and not black means B&W pages are counted as color in the printing cost. I have tested the same docuement (which was just one page full of sample black text) with and without crop/bleed marks. When the document is printed without the marks the printer clicks as a B&W page. When it is printed with the marks the printer click as a color page.
I am creating the doc in InDesign and exporting to Acrobat for printing. I am using Creative Cloud so I think I have the most up to date version of InDesign.
Any help would be much appreciated. Thanks.
-TS

With CS6 or later you can export to grayscale and in that case the crops will be black only. Like this:
You should set your Appearance of Black to Rich black otherwise 100% black CMYK might export to something less than 100% grayscale. When you check the PDF in Acrobat set the simulation profile to the grayscale profile you export to.

Loading, cropping and saving jpg files in Flex

I'm attempting to apply the code for selecting, cropping and saving image data (.jpg, .png) as shown on the web site:
http://www.adobe.com/devnet/flash/quickstart/filereference_class_as3.html#articlecontentAd obe_numberedheader_1
The sample application is contained within a class called Crop contained in the action script file Crop.as which begins as follows:
package
    import com.adobe.images.JPGEncoder;
    import com.adobe.images.PNGEncoder;
    import flash.display.BitmapData;
    import flash.display.DisplayObject;
    import flash.display.DisplayObjectContainer;
    import flash.display.Loader;
    import flash.display.LoaderInfo;
    import flash.display.Sprite;
    import flash.events.Event;
    import flash.events.IOErrorEvent;
    import flash.events.MouseEvent;
    import flash.geom.Matrix;
    import flash.geom.Rectangle;
    import flash.net.FileFilter;
    import flash.net.FileReference;
    import flash.utils.ByteArray;
    public class Crop extends Sprite
My application attempts to make use of the Crop class by including the Crop.as file:
     <mx:Script source="Crop.as"/>
in the Flex Component which needs it, and then calling the Crop constructor to perform the methods of the class
   var localImage:Crop = new Crop();
   localImage.Crop();
My application does not compile. The package statement (or the curly bracket on the following line) is flagged with the error "Packages may not be nested".
I have no idea why this should be as I cannot see any nested definitions anywhere in my application. The component includes the Crop.as file which contains the package and class definition.
Can anyone give my some guidance as to why this error is occurring?
Any help would be greatly appreciated.

Hi Scott,
#1
that error is because "fx:Script" (or mx:Script) are intended to include part of Actionscript code - but not class defitions or blocks.
So if you are trying to include e.g. such class:
package
     import flash.display.Sprite;
     public class Crop extends Sprite
          public function Crop()
               super();
          public function processImage():void
               trace("processImage()");
compiler will immediately complain as you are trying to incorporate nested class within your application code.
#2
here is correct way (I think) to incorporate some class via mxml tags (here using fx:Script):
Using class sample above:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                  xmlns:s="library://ns.adobe.com/flex/spark"
                  xmlns:mx="library://ns.adobe.com/flex/mx"
                  xmlns:utils="*"
                  applicationComplete="completeHandler(event)">
     
     <fx:Declarations>
          <utils:Crop id="cropUtil"/>
     </fx:Declarations>
     
     <fx:Script>
          <![CDATA[
               import mx.events.FlexEvent;
               protected function completeHandler(event:FlexEvent):void
                    cropUtil.processImage();
          ]]>
     </fx:Script>
</s:Application>
But note that you could simply create instance of your class by direct import in fx:Script:
     <fx:Script>
          <![CDATA[
               import mx.events.FlexEvent;
               private var cropUtil:Crop = null;
               protected function completeHandler(event:FlexEvent):void
                    cropUtil = new Crop();
                    cropUtil.processImage();
          ]]>
     </fx:Script>
hth,
kind regards,
Peter Blazejewicz

The trial version of Adobe photoshop 13 does not have the Crop And Straighten Photos option under file and automate....... all it has is "Fit Image"....... would really like to have that feature.... is it something they eliminated?

I am scanning in many old photos and there are several photos on one page.... I read about a feature that was suppose to be available under adobe photo shop elements 13 that would allow multiple cropping under the file, automate, Crop And Straighten Photos....... the only thing that displays on the version 13 that I have is "Fit Image"...... which doesn't help me...... have they removed this tool or do you have to crop and save one image at a time? Thanks for your help?

You want Image>Divide Scanned Photos

How to define JAXP Parsers and Transformer in a Web Application Context

Hi
I need to define JAXP Parsers and Transformer in a Web Application Context where I can deploy this application in any J2EE Application Server without modifying the server. That means that I can't set System properties or set the jaxp.properties file. I tried to use the META-INF/services/javax.xml.transform.TransformerFactory file but it didn't work.
Any ideas?

Hi
I need to define JAXP Parsers and Transformer in a Web Application Context where I can deploy this application in any J2EE Application Server without modifying the server. That means that I can't set System properties or set the jaxp.properties file. I tried to use the META-INF/services/javax.xml.transform.TransformerFactory file but it didn't work.
Any ideas?

Help XSLT Data Mapper and Transformations

Hi guys,
I need help in oracle ESB (XSLT Data Mapper and Transformations). I need to use the XSLT Data Mapper and Transformations using Response XML to Request XML.
Thanks
Vyas

The concept is the same as BPEL. Without going into too much detail have a look at the folowing tutorial.
http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28212/buildendtoend.htm#BEICEFJD
Near the bottom they show how to do transformations.
cheers
James

Mapping and transformation rules

Hi experts,
pls tell me what is this mapping and transformation rules in context wz filw to RFC scenario.
what do u mean by transformation and transformation rules.
Thanks
veeru

Hi
Mapping and Transformation both are same,to understand clearly we go for transformation.
Generally we go for Mapping/Transformation when ever you want to change the source structure into required format of the target structure we gor for mapping ie. Transforming the one structure to another.
Ex:
Source Structure:
Fname
Lname
Empid
Fname------>CONCATE theswe togetherly gives Name.
Lname------->CONCATE
My required Target Structure is:
Name(So to get Name we will use the CONCATE preefined functon under Graphical Mapping in Mapping Editor )
Empid
Thanks

Digital copies of Hugo and Transformer's with iTunes extras will not play

The copys of Hugo and Transformer's that came with a digital copy, that I had to download from iTunes will not play. When I try to play them it says "This movie requires QuickTime, which is not supported by this version of iTunes."
I have the latest version of iTunes installed and all of my other digital copy movies work fine. I thought it might just be a corrupt download, so I deleted the Transformer's movie, and to my suprise, I can't redownload it! If I go into the finder and find the file in itunes and try to play Hugo, there, it opens up Quicktime and plays just fine.
Anyone with either of these movies please chime in. I haven't tried much to fix this, as I don't know what to do. Thanks!

I just found this thread because I had "The Big Lebowski" and "Harry Potter, Deathly Hallows Part 1" doing that to me.
Your solution worked.
Then after those were back in the library with their nice album art, I see that Hugo had gone to the "gray cube" and wouldn't play! The "Extras" interface would, but not the movie. So I did it to that movie. There were multiple movies in the list, the Extras and the Movie itself. When I went to add it back in, I just got the movie, not the Extras interface.
Has anyone else figured out how to get the Extras back?

Cropping and Transforming on 16:9 to 4:3 with Pillars

Similar Messages

Maybe you are looking for