Cropping lost when still created from a smoothcam'd clip

Just to report that when creating a still (shift-N) on an image into a smoothcam'd clip, the cropping is lost; it's as if the still was created from the default clip (ie, not smoothcam). As a matter of interest, doing the still from a stabilized clip using Lock&Load X, works as you would expect.

bugs (if we are really talking about a bug here) can best be reported directly to [Apple Final Cut Pro Feedback page|http://www.apple.com/feedback/finalcutpro.html].
Because Apple will not read this forum.
Also. You can export File > Export > Using Quicktime Conversion > Still Image. Then import the still image, to make a freeze frame with the cropping. (yes, I know, it is a workaround...)
Rienk

Similar Messages

Badi that trigger when opportunity created from lead

Hi,
I am looking for a Badi that trigger when opportunity created from lead. I looked from Order_Save but i am unable to find the preceeding lead number for the opportunity as the link will be created after the opportunities saved.
Kindly help me
Thanks
Naveen

Hi Naveen,
You have to do it in Copy control customizing..
SPRO->CRM->Transactions->Basic Settings->Copying Control for Business Transactions->Define Copying Control for Transaction Types..
here you specify you Source transaction as LEAD and Target transaction as OPPURTUNITY and give some arbitarory filter value.
Then use this filter value in CRM_COPY_BADI implementation.
Dont forgot to reward points if this solves...
Siva

Error when workflow created from Function Module

Hi All,
I am trying to implement leave module workflow for one of my requirement.
when i create a leave from PTARQ transaction workflow it is being triggered, but when i tried to do the same from a custom function Module using the same FMs used in PTARQ, workflow initiated but stopped at initial stage( at switch branch )
i went to SWI1 transaction and executed it manually, it end up with error saying ' Error when starting a SWITCH branch'
what should i do to move it forward.
Thanks,
Krish.

Hi Kishore,
For leave workflow, SAP has the separate frame work. They called the FM SAP_WAPI_START_WORKFLOW and pass all necessary data's to Process the leave workflow.
Its not advisable to overwrite the standard behavior. Please check your 'REQ' workflow container in the log. There will be a no data or Some data's might be Missed.
Before Call the FM, make sure that all data's are passed to the Table parameter, SImple_Container.
The reason for the Error in your workflow is, there is no data stored in REQ.STATUS container.
please check the Workflow log.
Thanks.

New Photos Lost when Loading them from Camera to IPhoto

Heres the story. Have a new Powerbook G4, Fuji S7000 Digital Camera, and a Scandisk imagemate Disk Reader for my XD Card. I've used this camera / drive with my PC for a couple years with no issues on importing....but with my Mac, it seems that if I take a group of pictures, and then wait a day and take some more and go to import them are lost. The photos will show on the camera as being take as I always check to make sure I got the shot....but its happened to me twice on my honeymoon where i've taken about 10 photos, and plugged my XD card into the Scandisk reader to import them....and the new photos are GONE. The pictures I'd taken the day earlier are still there...but the new ones are no where to be found. When I remove the disk and put them back in the camera to see if they are there....they are removed from there also. Help!!! I've lost some amazing photos and am getting "spooked" about losing more or even thinking about loading them onto IPhoto. any help / suggestions would be appreciated.

Hi Bill,
Until you or someone here can figure out what is going wrong I suggest using Image Capture to download your images. I also suggest you not to use the option of having Image Capture or iPhoto "delete the photos from the camera after downloading" You should always delete the photos from the camera yourself after you have seen they have downloaded safely to your computer.
Using Image Capture to download images and video clips:
Open up Image Capture which is found in the Applications folder.
When it is opened, go to Image Capture/Preferences
Under the General button choose
Camera: When a camera is connected, open Image Capture.
The next time you connect your camera Image Capture will open.
In the window that opens you will see an Options button. Click on that button to set your options.
To find out more about Image Capture (it can do a lot more) Click on Help in the menu bar when Image Capture is open.
iPhoto: How to Change the "Open Automatically" Preference
If you find you can't change any of Image Captures preferences or can't access any drop down menus or they are greyed out, check to make sure Image Capture is loose in the Applications folder and not within a sub folder.

Airport connection lost when waking up from sleep

Computer: 24" iMac, 2.8 GHz Intel Core 2 Duo, Mac OS X 10.6.2 build 10C540
Problem: About 50% of the time when my iMac wakes up from being asleep Airport will not function at all. Most of the time it will turn itself off and will not turn back on no matter how many times you tell it to.
A recent software update claimed to fix computers whose Airport stopped functioning after upgrading to Snow Leopard, which is the case for me. But this may have only been for MacBooks, I don't really remember. Either way the update has changed absolutely nothing.
How do I fix this?

No dice. I also tried the changing the IPv6 to Off thing and that seemed like it worked for a few times but the Airport eventually refused to turn on when it woke up.
I still can't find any solutions online. It seems like many people have similar problems, but each one is a little different.

Metadata is lost when updating photos from iphone to imac

Hi! I just got a new iphone 4, and when I try to import photos from it, I see that all metadata is gone. I checked with iPhoto, Aperture and Adobe Bridge and I can only see the metadata in the photos directly imported from the iphone camera (no editing). If I use any app (Hipstamatic, Monochromia, etc.) the metada is gone, I cannot even see the camera that the photo was taken with... I checked the settings for the apps, and the setting are correct.
I saw plenty of pictures taken/edited with these apps (on Flickr, etc) that still have metada.
Does someone know how can I keep the metadata in all photos?
Thanks!!

Not what I wanted to hear but thanks for your quick response. Do you know what the problem could have been? Cheers

Filename lost when printing PS from InDesign CS6

We print PostScript to hotfolders in our ApogeeX prepress system. Previous versions of CS Indy would pick up the filename and add a .ps extension. In CS6 the first time I printed I had to type in the name and now every time I print another file it always reverts to that name rather than pick up the name of the current file. This is annoying because if an operator does not catch it then the PDF generated by ApogeeX replaces the file in the original job rather than create a new file. Is this a preference I can set? I've looked but I do not find anything.
Thanks in advance for any help you can offer.
Clark

I wish Adobe would just make preserving of current filenames the default already!
Anyway, here's what worked for me:
Quit InDesign.
Start up InDesign.
Create a new document and DO NOT save or name it.
Open the print dialogue box (ie: try to print your document). Select all your preferred print settings and then select “Save Preset” and name it.
Select “Print” and the original filename should be preserved in your Postscript file.
From now on when you select the Print Preset you just created, it should preserve the filename of the current document.
I hope this works for you too. Good luck!
Evan

Page item values lost when moving application from 3.1.1 to 4.0.2

I have an application that is working fine in version 3.1.1, but when I move it to 4.0.2, I'm having some issues with losing page item values. I have a page (6) with master key fields that are used to set page items on another page (7) when I branch to that page. In 3.1.1 the items in the page I'm going to are defined as 'Hidden and Protected' and in 4.0.2 they are defined as 'Hidden' (don't see a 'hidden and protected type'). When page 7 first displays, I see the values I passed in the session items. When I fill in the displayed items on the form and click to create a record, I get errors that the key values are null (these are the items I set when I branched to this page). When I look in the session items now, the values are missing. Why are the values lost and is there a work around?

Hi there,
In 4.0.2 there is no hidden & protected item but instead you have one select called "value protected" you can select yes or no there.
Edit your item and See the "Source" region of your item, in the "Source used" it should be "current value in session state is null" and in "Source type" should be "static assignment..........".
In the "Default" region the value type should be "static text ......."
see if there is any changes in these properties.
thanks
Tauceef

Connection lost when sending email from iSeries machine w/ JavaMail API?

Hello all,
I have a never-ending process (RPGLE) running on the iSeries machine that frequently needs to send an email. In an attempt to improve performance, I connect to the SMTP server as soon as this process starts. Then, each time an email must be sent, I construct the message and send it. This seems to work, but occasionally (no particular pattern) something goes wrong that causes a javax.mail.MessagingException to be thrown. When this occurs, the process continues to retry the send until it works again... it always ends up working again after 4 minutes or less. However, I'm concerned about the fact that it gets this exception. Any suggestions or ideas would be greatly appreciated. Thanks! Jesse
Here are some code snippits:
~~~The RPGLE process first calls a method to setup the SMTP server and connect:
String hostName = "email.hostname";
String hostType = "email.hosttype";
// Get system properties
Properties systemProperty = System.getProperties();
// Setup mail server
systemProperty.put(hostType, hostName);
systemProperty.put("mail.smtp.connectiontimeout", "30000");
systemProperty.put("mail.smtp.timeout", "30000");
// Get session
session = Session.getDefaultInstance(systemProperty, null);
// Connect to the smtp server.
transport = session.getTransport("smtp");
transport.connect();
~~~ Then, when needed, the RPGLE process continues to call a method to send email. It is in here that the MessagingException is thrown.
if (!transport.isConnected())
transport.connect();
message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.setRecipient(Message.RecipientType.TO, new InternetAddress(to));
message.setSubject(subject);
message.setContent(text,"text/html");
message.setHeader("X-Mailer", "HtmlMail");
message.saveChanges();
transport.sendMessage(message, message.getRecipients (Message.RecipientType.TO));

Thanks for the link. It was helpful. I added code to print the details of the exception to an IFS text file. However, I'm still not able to determine the problem. Any suggestions you can provide will be greatly appreciated. Thanks!
These are the details of the exception:
com.sun.mail.smtp.SMTPSendFailedException: 451 4.3.2 Please try again later
java/lang/Throwable.<init>(Ljava/lang/String;)V+4 (Throwable.java:85)
java/lang/Exception.<init>(Ljava/lang/String;)V+1 (Exception.java:33)
javax/mail/MessagingException.<init>(Ljava/lang/String;Ljava/lang/Exception;)V+2 (MessagingException.java:57)
javax/mail/SendFailedException.<init>(Ljava/lang/String;Ljava/lang/Exception;[Ljavax/mail/Address;[Ljavax/mail/Address;[Ljavax/mail/Address;)V+3 (SendFailedException.java:77)
      com/sun/mail/smtp/SMTPSendFailedException.<init>(Ljava/lang/String;ILjava/lang/String;Ljava/lang/Exception;[Ljavax/mail/Address;[Ljavax/mail/Address;[Ljavax/mail/Address;)V+10 (SMTPSendFailedException.java:46)
      com/sun/mail/smtp/SMTPTransport.issueSendCommand(Ljava/lang/String;I)V+135 (SMTPTransport.java:1333)
      com/sun/mail/smtp/SMTPTransport.mailFrom()V+509 (SMTPTransport.java:906)
      com/sun/mail/smtp/SMTPTransport.sendMessage(Ljavax/mail/Message;[Ljavax/mail/Address;)V+244 (SMTPTransport.java:535)
      JavaMail.sendMail(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)S+139 (JavaMail.java:191)

Dashed Table borders do not render correctly when PDF created from MS word 2013

I have a defined format for many documents which have all been created in MS word 2007. Never any problem creating PDFs of these using ADOBE XI Pro.
Updated to MS 2013 and now when converting the same doc to PDF all dashed borders around tables render as solid lines. The only time they render correctly is if I PRINT to PDF. Printing to PDF is not an option as I create batches of many documents at one time, so would be to time consuming. This was an issue when i considered upgrading 2007 to 2010 a couple of years ago, so caused me to delay upgrade.. upgrade is now required.
I have a sample of a document if required.
thanks

Just as a test, have you tried the MS plugin for PDF creation? I have found with other versions of WORD and Acrobat that PDF Maker and the MS plugin can both fill in dots and dashes on vector graphics (basically what the border is) and yet it comes out correctly with printing to the Adobe PDF printer. Unfortunately I do not have a solution. In my case, it seemed to be related to the vector graphic itself (I could import it to InkScape or other vector graphic tool and save to EMF and it then worked fine. It may be something that MS themselves have messed up in OFFICE 2013. Good luck.

Word TOC links lost when PDF created

I'm trying out Acrobat Pro XI- the trial version.
The links in the source Word 2007 document work properly, are hyperlinked, all that good stuff. I can PDF using other software and the TOC links work properly.
When I use Adobe Acrobat Pro XI, no TOC links when the PDF is created.
I've searched the forum - the only suggestion I found does not apply.
Thanks

Look at the Preferences in Word's Acrobat tab and see if it's checked properly.

Error in Planned GI Date when delivery created from APO TP/VS

Hi All,
The problem being faced here is that the Planned GI date & Planned pick up date in delivery is changing to the date on which the shipment ends, when generated through 'OLTP Generation of Deliveries'.
I will explain the problem more in details
I created the Sales order for a customer today i.e. on 21/11/07. The system calculated the MAD & RDD correctly in Sales Order. Shipment formed against this Sales order in TP/VS. TP/VS suggested correct shipment activities such as Goods Issue, Loading & Shipment end considering transit Time of 24 Hrs. I then
generated deliveries through 'OLTP Generation of Deliveries' & delivery also got created successfully in R/3. However the Planned GI date in the delivery is shifted by one day & falling on next day i.e. on 22/11/07 (the date on which the shipment is completing). Also the material availability date also gets shifted accordingly.
This is not matching with TP/VS results where the Goods Issue as per TP/VS is 21/11/07. Hence the Planned GI date in delivery should be 21/11/07 & not 22/11/07.
I have checked the Time Zone consistency in APO & R/3 & both match with each other.
For your information the system used are SCM 4.1 SP10 & ECC 5.0
Can any one suggest how to resolve this issue ?
Thanks
V Vasudevan

I hope by this time you must have resolve this issue or your query. If possible, Please share your observations

First tab not getting "TabPanelTabSelected" class when tabs created from dataset

Greetings all. I've got a tabbedpanel widget whose tabs are
created with a spry repeat region. works great, except none of the
tabs get the "TabPanelTabSelected" class on initial load. I tried
setting the defaultPanel in the constructor, but to no avail.
here's the div that creates the tabs:
<div class="statustabs_TabbedPanels SpryHiddenRegion"
id="statustabs" spry:region="dsRequestCounts">
<ul class="statustabs_TabbedPanelsTabGroup"
spry:repeatchildren="dsRequestCounts">
<li
class="statustabs_TabbedPanelTab"
spry:hover="statustabs_TabbedPanelTabHover"
spry:select="statustabs_TabbedPanelTabSelected"
tabindex="{dsRequestCounts::@StatusID}"
onclick="updateRequests({dsRequestCounts::ds_RowID})"
>{dsRequestCounts::@StatusName} (<span
id="statustabcount_{dsRequestCounts::ds_RowID}">{dsRequestCounts::@RequestCount}</span>)< /li>
</ul>
</div>
and here's the constructor, which is done after the tab divs
are created:
<script type="text/javascript">
var statustabs = new Spry.Widget.TabbedPanels("statustabs",
tabHoverClass:"statustabs_TabbedPanelTabHover",
tabSelectedClass:"statustabs_TabbedPanelTabSelected",
tabFocusedClass:"statustabs_TabbedPanelTabFocused",
panelVisibleClass:"statustabs_TabbedPanelContentVisible"
</script>
So, the question is: how can i get that first tab, on load,
to take on the appropriate class so that it's styled appropriately?
thanks so much.
Marc

Thanks a lot Kin. I now have it working, mostly. I changed
the contentgroup div so that it repeated over the RequestCounts to
create the table. However, when I did that, obviously it drew the
table each time through the loop. So I changed the table's spry:if
to also look at the current status names for equality. only then
does it actually draw the table for the status that's been clicked.
the final version appears below.
Now, I do have two problems though.
1) I can no longer use the spry:loading state. If I have
this: <div spry:state="loading">loading...</div> right
under the "TabbedPanelscontentGroup" div, I get an error that
tpIndex is not defined. So...do you know how i can get this
functionality back?
2) One thing I needed to implement was "persistent" tab on
data refresh. I added a loadInterval on the RequestCounts dataset,
and thus everytime that interval was up the tab went back to the
first one. So in the updateRequests() function, i set a variable
named 'selectedTab' to the clicked rowid. Then, in the
tabObserver.onPostUPdate function, i have the dsRequestCounts
current row being set to that variable.
The only problem with this is that the "requests" dataset
then gets loaded twice when the interval causes the data to reload:
once for the first row, and then once for my 'persisted' row. This
makes sense, but i just don't know how to fix it. i'm pasting the
code into this post...maybe someone can see some way to get around
this?
Basically, the behavior I want is this:
a) on initial page load, load the requestCounts dataset and
use the first row of that dataset to load the requests dataset
(this works)
b) when a user clicks a tab, load the requests dataset with
the rowid of the clicked tab (this works)
c) when the loadInterval causes the RequestCounts dataset to
be refreshed, use the 'selectedTab' variable as the CurrentRow of
the RequestCounts data such that the Requests dataset is loaded
with the correct row and the selected tab is correct
So the only rpoblem i have is with c, and the only problem
there is that essentially what happens is the requests dataset is
loaded twice.
Thanks to any and all for advice getting the "loading" state
working and the refresh behavior correct!
--------------- here's the current code -----------------
<cfset request.cfcore = "/argus/dope/">
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml"
xmlns:spry="
http://ns.adobe.com/spry">
<HEAD>
<TITLE>Spry widgets Samples One</TITLE>
<link href="/argus/dope/style/style.css" rel="stylesheet"
type="text/css" />
<link href="/argus/dope/style/widgets.css"
rel="stylesheet" type="text/css" />
<SCRIPT
SRC="/argus/spry/includes/xpath.js"></SCRIPT>
<SCRIPT
SRC="/argus/spry/includes/SpryData.js"></SCRIPT>
<SCRIPT
SRC="/argus/spry/includes/SpryXML.js"></SCRIPT>
<SCRIPT
SRC="/argus/spry/widgets/tabbedpanels/SpryTabbedPanels.js"></SCRIPT>
</HEAD>
<body>
<cfoutput>
<script type="text/javascript">
var selectedTab=0;
var loaded = 0;
var statustabs = new Object;
//datasets for the tabbed panel of requests.
dsRequestCounts = new
Spry.Data.XMLDataSet("#request.cfcore#ajax/act/act_RequestCountsXML.cfm?StatusesFromLast= 100&ServerGroupID=14",
"statuses/status",{useCache:false,loadInterval:20000});
dsRequests = new
Spry.Data.XMLDataSet("#request.cfcore#ajax/act/act_RequestsXML.cfm?StatusesFromLast=100&S erverGroupID=14&StatusID={dsRequestCounts::@StatusID}",
"requests/request",{useCache:false});
//for the tabbed panels
tabObserver = new Object;
tabObserver.onPostUpdate = function(notifier,data){
dsRequestCounts.setCurrentRow(selectedTab);
//alert("onpostupdate: " +
dsRequestCounts.getCurrentRowNumber());
statustabs = new Spry.Widget.TabbedPanels("statustabs",
{defaultTab:dsRequestCounts.getCurrentRowNumber(),
tabHoverClass:"statustabs_TabbedPanelTabHover",
tabSelectedClass:"statustabs_TabbedPanelTabSelected",
tabFocusedClass:"statustabs_TabbedPanelTabFocused",
panelVisibleClass:"statustabs_TabbedPanelContentVisible"
Spry.Data.Region.addObserver("statustabs",tabObserver);
function updateRequests(rowid){
dsRequestCounts.setCurrentRow(rowid);
selectedTab=rowid;
//alert("updaterequests: " +
dsRequestCounts.getCurrentRowNumber());
//statustabs.showPanel(rowid);
</script>
</cfoutput>

<div id="statustabs" class="statustabs_TabbedPanels
SpryHiddenRegion" spry:region="dsRequests dsRequestCounts">
<ul class="statustabs_TabbedPanelsTabGroup">
<li spry:repeat="dsRequestCounts"
class="statustabs_TabbedPanelTab"
tabindex="0"
onclick="updateRequests({dsRequestCounts::ds_RowID})"
>{dsRequestCounts::@StatusName} (<span
id="statustabcount_{dsRequestCounts::ds_RowID}">{dsRequestCounts::@RequestCount}</span>)< /li>
</ul>

<div class="statustabs_TabbedPanelsContentGroup">
<div spry:state="loading">loading...</div>
<div class="statustabs_TabbedPanelContent"
spry:state="ready" spry:repeat="dsRequestCounts">
<table class="requeststable" width="100%"
spry:if="{dsRequests::ds_RowCount}!=0 &&
'{dsRequestCounts::@StatusName}'=='{dsRequests::@StatusName}'">
<tr>
<th
onclick="dsRequests.sort('@RequestID','toggle')">ID</th>
</tr>
<tr spry:repeat="dsRequests"
spry:even="requeststable_even" spry:odd="requeststable_odd">
<td>{dsRequests::@RequestID}</td>
</tr>
</table>
<div spry:if="{dsRequests::ds_RowCount}==0">
Move along...nothing to see here
</div>
</div>
</div>
</div>
</body>
</html>

Pictures lost when exporting pdf from Indesign.

Hey
I have a problem with exporting an Indesign CS4 document into pdf. In the pdf-file all pictures turn into grey boxes.
All photos is cmyk and saved as eps-format.
What is wrong?
Hope someone can help.

Subject line says you're *exporting* PDF. Are you exporting or printing to the Adobe PDF printer? Or do you mean that Acrobat is displaying perfectly good pictures as gray boxes (and you verified this by looking at the same PDF on a different machine)?
In my Acrobat 7 (haven't installed 9 yet) I can turn off display of large pictures in Preferences > Page Display > Display large images. If this is unchecked, I can make at least some of my pictures display as gray boxes.
Ken Benson

When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Websites remembering you and automatically log you in is stored in a cookie.
*Create an allow Cookie Exception to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
*Tools > Options > Privacy > Cookies: Exceptions
In case you are using "Clear history when Firefox closes":
*do not clear Cookies
*do not clear Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
Clearing cookies will remove all specified (selected) cookies including cookies that have an allow exception and cookies from plugins.

Cropping lost when still created from a smoothcam'd clip

Similar Messages

Maybe you are looking for