Cropping multiple images with same ratio

I'm photographing an old scrapbook that has over 200 pages. I used the "do not constrain" to crop the first page. Now I want that same aspect ration for the rest of the pages.The pages are going to be printed at13.5 x 9.00 inches so I put this value into the custom crop HUD but the crop ratio it gave was incorrect.
However, It seems simpler to crop them all at the same ratio and then put the image size in at export, a process I'm familiar with. Help would be much appreciated. Thanks, jp

The Crop HUD, afaict, allows only integers in the Width and Height fields*. To convert 13.5 to an integer I needed to multiply by 2. To keep the aspect ratio the same, any arithmetic operation on one parameter must be applied to the other, so I multiplied 9 by 2. Thus, 27 x 18.
There are many ways to express the same ratio. I could have corrected for the incorrect parsing of the decimal by multiplying _both_ height and width by 10, and used 135 x 90. (13.5 x 9), (27 x 18), and (135 x 90) all represent the exact same aspect ratio. The simple way to express it is 3 x 2.
*This makes sense mathmatically (to me, a lapsed abstract tinkerer), but assumes, wrongly, that all users are sensible mathmeticians. The interface should be refined enough to either accept decimal input in those fields or refuse it. Currently, it accepts decimal input, but misreads it. You might send Apple a note and ask them to fix this: "Aperture➞Provide Aperture Feedback".

Similar Messages

Bridge CS4 won't output to pdf multiple images with same filename

Hiya...my googling efforts have thus far failed!
I've got CS4, and in Bridge, I created a New Smart Collection to find all filenames in a folder containing "." or ".jpg" - which in turn searched through all the subfolders like what you used to be able to do in Photoshop CS3. Very simple stuff, but all the images are jpg's, but in multiple folders (I don't want to move them out of the folders, as the files came from an external source, and there are heaps of folders, and I don't want to pdf each subfolder seperately as it will take forever).
The problem is that some of the files have the same filenames (again I'd prefer not to rename, as it happens a lot on this project, and they are all over the place). So whilst Bridge will show the thumbnail images correctly in the content tabbed screen in my New Smart Collection, but once I've done the Output to PDF thing, for example, instead of showing both different images it has pdf only the first image but repeated it twice. And this happens multiple times throughout the pdf, the more times the same filename is used, the more times the first image gets repeated.
I know that it is messy to have multiple similar filenames, but why can't bridge just place the image anyway? It allocated a space for it on the pdf and does show it in bridge, it just doesn't seem to survive the transfer to pdf well.
The only other thing that I have done is use the below link (which was posted on another adobe forum thread) to create a custom pdf output template (nothing too fancy, just number of rows / columns, size, font etc). But I've tried using the standard bridge templates and it does the same thing.
http://www.proficiografik.com/2009/08/03/save-custom-pdf-output-template-in-adobe-bridge-c s4.html
Any help would be appreciated...even if to tell me that I am being unreasonable!
UPDATE 16/11/09
Just to let you know that I seem to have resolved the bug inadvertently with one of the Adobe updates. The below is the link for the AdobeOutputModule-2.1-mul-AdobeUpdate.zip which was released on 2/19/2009 - which allows for headers & footers to be placed in the Ouput pdf. I finally installed it today, and everything seems to be working fine now (i.e. I can pdf multiple images with the same filenames and the pdf will actually show each different image rather than repeating only 1 of the images).
Must have been a fix installed in the contact sheet templates that get installed with the update - not sure why the original version was corrupted, but I've left that with the Adobe guys (I submitted a bug report - and they were able to replicate the problem but hadn't fixed it as yet).
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4228
Message was edited by: djtun71 (16/11/09)

When I click import from disc I am asked to choose a disc and then I get this message:
The following photos will not be imported because they are already present in the catalog. To see these photos in the catalog select 'Show in Library' (the import will be canceled).
This is followed by a long list of images. If I click 'Show in Library' I can see all the images with the same filename. And then they start to automatically write over those images with images from the disc. However they keep the same metadata and keywords from the previous images. If I click on Import and deselect the "don't reimport suspected duplicates" box, it imports only the images that don't share filenames and none of the images that do.
Is there a way of setting the "Don't reimport suspected duplicates" box in preferences?

Multiple images with same filename

I have a very large library of images on DVD and I want to make a database of the entire library in Lightroom. I do not rename my images from my camera so it's not uncommon for me to have multiple images on different discs with the same filename. I'm finding when I try to import these images into lightroom they write over the existing images that share the filename. Is there a way to work around this? I assumed the different EXIF data would be enough for the program to realize that it was dealing with two different images, but that doesn't seem to be the case.
In a possibly related issue, I've found some images that have the wrong filename in lightroom (different from the filename on the original disc). What's up with that?
I've been working for weeks trying to create this database. It's huge already and I've barely scratched the surface of my entire collection. Currently I'm over 22,000 images and I suspect I'll be over 300,000 when all is said and done. I need to resolve this or all those hours of work will have been for naught. Help!
Thanks,
Steven

When I click import from disc I am asked to choose a disc and then I get this message:
The following photos will not be imported because they are already present in the catalog. To see these photos in the catalog select 'Show in Library' (the import will be canceled).
This is followed by a long list of images. If I click 'Show in Library' I can see all the images with the same filename. And then they start to automatically write over those images with images from the disc. However they keep the same metadata and keywords from the previous images. If I click on Import and deselect the "don't reimport suspected duplicates" box, it imports only the images that don't share filenames and none of the images that do.
Is there a way of setting the "Don't reimport suspected duplicates" box in preferences?

Multiple images with same filename-how does iphoto deal?

I recently lost a several pictures from iphoto on my imac running snow leopard. I have tried multiple things with the guidance of a senior advisor from apple, but the pictures are not retrievable. I have multiple backups for many, but I lost about 20 images. Naturally, I am a bit paranoid now about the stability of the remaining photos in my 66gb library, so have made multiple backups of the entire library and plan to migrate to aperture 3 with a vault.
It just struck me though, that because we use multiple cameras with the same canon file naming scheme, I have several instances where I have multiple photos with the same filename. Is this potentially a problem, or because the EXIF info is different for each one, am I okay? If this is a problem, do any of you have any remedies? I plan on adjusting the naming scheme on our cameras for the future.
Thanks in advance!

To add to Terence's reply: the only time you might run into a problem is when you might try exporting photos with the same file name to the same folder on the HD. If that were they case you could batch rename the photo's titles with Photos->Batch Change->Titles to Text with the option to add a sequential number at the end of the file name, i.e. Text - 001.jpg, etc.
Another alternative would be to upload each new shoot to a folder on the desktop and rename them with a renaming app likeName Mangler or Renamer4Mac . I rename them with the date taken and a brief description: 2009-05-10-MomsDayBalboaPark-001.JPG. You also could add an identifier to the description to tell which camera it came from.
This method will avoid any name conflict down the line and make it easy to identify photos as to their general content when used outside of iPhoto. I've found that a little extra effort up front has saved me a lot of problems on down the line.

Multiple images with same filename-how does aperture deal?

I recently lost a several pictures from iphoto on my imac running snow leopard. I have tried multiple things with the guidance of a senior advisor from apple, but the pictures are not retrievable. I have multiple backups for many, but I lost about 20 images. Naturally, I am a bit paranoid now about the stability of the remaining photos in my 66gb library, so have made multiple backups of the entire library and plan to migrate to aperture 3 with a vault.
It just struck me though, that because we use multiple cameras with the same canon file naming scheme, I have several instances where I have multiple photos with the same filename. Is this potentially a problem, or because the EXIF info is different for each one, am I okay? If this is a problem, do any of you have any remedies? I plan on adjusting the naming scheme on our cameras for the future.
Thanks in advance!

The same filename isn't an issue, and no, it won't consider them duplicates, unless you try importing them into the same project.

Help! iPhoto alerts pop up that say, "The photo "DSC06691.JPG" cannot be opened because the original cannot be located." I can locate original, but I have multiple images with same name!

Recently my library prompted me to rebuild due to inconsistencies that were found in library. Now alerts pop up that say it can't locate the original of an image, so I have an option to cancel or locate it. I can locate the file, however, there are usually 2 or 3 photos with the same file name! Not sure which one it is trying to locate etc. I have a feeling this is the problem. Not sure how it happened. Has anyone had this happen to them?? iPhoto library hasn't rebuilt because there are so many pop up alerts...I have a feeling it's a big problem. I am going to attempt to select one image for each one and see what happens, but I am concerned what the outcome will be.
My camera cards are already deleted (I knew I should have kept them!!). We do have time capsule, so I am assuming I can go back, but I am worried that iphoto will do the same thing. It just started doing it about two weeks ago and it didn't correspond with any photo uploads. I hope someone can help!

Are you running a managed or referenced library?
If it's a managed library apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Read multiples files with same extension

how to read multiples files with same extension in java.
for ex : i would like to read all .DAT files from C drive using java.
How is it done

- You create the filter
- You get the list of files
- You open and read each file.
For the first two above you look at java.io.File and listFiles(FileFilter filter).
For the third you find whatever input stream is appropriate from java.io.*

Editing MULTIPLE images with lightroom 2 corrections in CS3

Does anyone know how to send multiple images with LR2 corrections to CS3
for further editing? If I select multiple images in LR2 and click photo/edit in/photoshop cs3 only one image opens in photoshop. If I could send more than one image at a time it would greatly speed up my workflow.
Thanks

It works for me when I highlight multiple images, right-click on one of them, choose edit in Photoshop. If this isn't working for you, is it possible that your Photoshop screen mode is such that you have to switch images using the Window option on the menu?

Multiple accounts with same email

I have multiple accounts with same email
The one that has all my contacts is the one attached to FB but for some odd reason I can no longer access this specific account
When I try to reset my password, it only keeps asking me to change my FB password
Once I try logging in on Skype, it keeps asking my FB to connect to the other 2 Skype accounts, completely diffente usernames
I am only interested in the one that originally connected to my FB as it has all my contacts
As my other 2 accounts are my old Skype accounts and have my old contacts from years ago

Actually this morning I was able to log on the account from an iPad with no fuss but the pc refuses to sign in^^^!???! "Skype couldn't connect" - What is going on???
I also found out that I could sign in via a browser but not via skype program... So I uninstalled it and installed it again and it's working now...
I have now changed the email so I don't have 3 accounts with the same primary email as Skype seems to not being able to handle multiple accounts with same email!!!

Multiple members with same alias

I have multiple members with same alias name. Are there anyway to build dimension members with same alias name?

Typically I will concatinate the member name (as either a prefix or suffix ) to the Alias to make it unique

Multiple Images with a Loader

I am trying to load and display multiples images with a Loader, one after another. The program only displays the last image to be loaded and added to the stage. What is wrong? Here is my code..
---START OF CODE---------------------------------------
import flash.events.MouseEvent; //Package needed for mouse events
btnGenerate.addEventListener(MouseEvent.MOUSE_DOWN, buttonPressed); //Button click listener
chkSeal.addEventListener(MouseEvent.MOUSE_DOWN, chkTriggered); //Check box click listener
//If the check box is toggled, switch to 8 or 9 max characters
function chkTriggered(event:MouseEvent):void
     if (chkSeal.selected == false)
          txtInput.maxChars = 8;
     else
     txtInput.maxChars = 9;
function buttonPressed(event:MouseEvent):void
     var pictureLoader:Loader = new Loader(); //Picture loading variable
     var plateText:String = txtInput.text; //Plate text string
     var filename:String; //Filename for each character's associated picture
     var currentX:int = 10; //Current x position
     var i:int; //Counter to use in for loop
     plateText = plateText.toUpperCase(); //Convert plate text to upper case
     //For every character in the sequence
     for(i = 0 ; i < txtInput.length ; i++)
          filename = "/Numbers and Letters/" + plateText.charAt(i) + ".png"; //Generate filename
          pictureLoader.load(new URLRequest(filename)); //Load the picture
          addChild(pictureLoader); //Add picture to the stage
          pictureLoader.x = currentX; //Move picture into position
          pictureLoader.y = 366; //Constant y position for all images
          currentX = currentX + 52; //Increase the current x (by the size of the images)
     txtInput.text = "Done!"; //Display done in the text box
-------------END OF CODE----------------------------

You appear to only have one Loader instance working for you. A Loader can only hold one load at a time. Try creating new Loaders within the loop.

Bootdisk two images with same name n time

hello,
I have copied new image on 6509 , s2t54-adventerprisek9-mz.SPA.151-1.SY1.bin but when i do show bootdisk: it shows 2 images with same name .
6509#show bootdisk:
-#- --length-- -----date/time------ path
1     33554432 Apr 19 2013 03:22:44 +00:00 sea_console.dat
2     99168744 Apr 19 2013 03:28:42 +00:00 s2t54-adventerprisek9-mz.SPA.151-1.SY.bin
3            0 Apr 19 2013 15:44:26 +00:00 call-home
4         7209 Jun 11 2013 15:02:10 +00:00 startup-config.converted_vs-20130611-150121
5         7126 Jun 11 2013 15:37:38 +00:00 startup-config.converted_vs-20130611-153738
6     33554432 Apr 19 2013 03:46:50 +00:00 sea_log.dat
7     28856320 Apr 19 2013 04:04:56 +00:00 c6500-fpd-pkg.151-1.SY.pkg
8     99763688 Nov 19 2013 10:22:30 +00:00 s2t54-adventerprisek9-mz.SPA.151-1.SY1.bin
9     99763688 Nov 19 2013 10:22:30 +00:00 s2t54-adventerprisek9-mz.SPA.151-1.SY1.bin
729382912 bytes available (295174144 bytes used)

Its kind of cosmetic issue. Verify the same using the command dir bootdisk:
Thanks & Regards,
Karthick Murugan
CCIE#39285

Mounting multiple directories with same name on different severs to a single mount point on another server

We have a requirement where in we have multiple solaris servers and each solaris server has a directory with the same name.
The files in these directories will be different.
These same name directories on multiple severs has to be mounted to a single directory on another sever.
We are planning to use NFS, but it seems we can not mount multiple directories with same name on different severs to a single mount point using NFS, and we need to create multiple mount points.
Is there any way we can achieve this so that all the directories can be mounted to a single mount point?

You can try to mount all these mount points via NFS in one additional server and then export this new tree again via NFS to all your servers.
No sure if this works. If this works, then you will have in this case just an additional level in the tree.

Multiple accounts with same email can't acces original account

ok, so i created a new skype. I was messing with skype account on my desktop and wound up unlinking and re linking the account basically i made 2 extra accounts and they have my live: random.namehere_1 and live: random.namehere_2 and i cant log into my original one anymore also when i try to do a recovery it says i have 2-3 skype accounts on my email and i cant log into my accounts by typing in the live:random.namehere and the password it just says ooops something went wrong basicallly saying the pw and account name are wrong when they arent i made sure of it. so how do i eliminate the cloned accounts and log into the main one.

Actually this morning I was able to log on the account from an iPad with no fuss but the pc refuses to sign in^^^!???! "Skype couldn't connect" - What is going on???
I also found out that I could sign in via a browser but not via skype program... So I uninstalled it and installed it again and it's working now...
I have now changed the email so I don't have 3 accounts with the same primary email as Skype seems to not being able to handle multiple accounts with same email!!!

InDesign CS3 Scripting XML Import Multiple Images into same Text Frame

I am having trouble importing multiple images into the same Text Frame using XML import. I imported 5 images into the text frame. However, all 5 images are laying on top of one another. Does anyone know if there is a way to have all images laying out like how Microsoft Word handles inline images, i.e., laying out next image to the right of previsous image in the same line and if there is not enough space left in the line, then wrap to next line. Thanks in advance. I understand I could use JavaScript to do post import processing, e.g, calculate the image size and place each images accordingly. But I am trying to see whether there is a way to do this without scripts.

You can apply an object style to all anchored images by script. A text frame containing main flow should be selected.
var doc = app.activeDocument;
var textFrame = app.selection[0];
var rectangles = textFrame.texts[0].rectangles;
if (rectangles.length > 0) {
for (var i=0; i < rectangles.length; i++) {
rectangles[i].appliedObjectStyle = doc.objectStyles.item("Cover");
However, there is a better approach:
Step 1
Create place holders for a single "Book" element and format it as needed -- apply an object style to the cover.
Step 2
Import the xml file -- the placeholders are replaced with data from the 1st xml element
Step 3
Drag & drop the element containing all "Books" elements into the main flow -- all elements are placed and formatted the same way as in step 1.
Finally, add a new page, click the overset text icon and autoflow text to add pages so that to fit all the text.
Hope this helps.
Kasyan

Cropping multiple images with same ratio

Similar Messages

Maybe you are looking for