Cross company incoming payment

we use F-28 to process inter-company USD incoming payment, (customer is in another company code, but both two company use same local currency JPY), the problem is when we enter cash discount, it will generate line item and defaulted to discount account 30000125, (this is global setting, we can't change to another GL), is there any way we can change the discount account into 30000126(another cash disc account)
we can change to 30000126 discount account for JPY incoming payment during F-28 posting, but why can't for USD incoming payment?
thanks

resolved

Similar Messages

Cross company code payment - Reallocation of discount

I have a peculiar requirement and I am out of my wits to find a solution. I am confident that our Forum members will give me a solution to this.
The scenarios is like this. There are 122 company codes and there is lot of cross company code payments. Meaning one company code say '0001' pays on behalf of the other 121 company codes. At the time of payment the following enter is passed:
              In the paying company code:
             Debit Inter-company customer
             Credit External Vendor
               In the other company codes:
              Debit Expense (A cost center is assigned to this GL)
              Credit Inter-company Vendor
At the time of payment to the external vendor the following entry is passed:
             Debit External Vendor
             Credit Bank.
So far it is good. But now if the Vendors term allows discount of say 2% then at the time of payment the entry generated is :
               In the paying company code
              Debit External Vendor
              Credit Discount
              Credit Bank
           No entry in the other company codes.
In case the payment term of the vendor allows discount then the client wants the discount to be posted as follows:
                 In the paying company code
              Debit External Vendor
              Credit Inter-company customer
               (in the proportion of each company code's share of expense)
              Credit Bank
                In the other company codes
               Debit Inter-company Vendor
               Credit Expense account (the one which was originally debited)
                                                   (the same cost center should also be credited)
How can this be achieved. I know there is no standard functionality to do this. But can somebody suggest a logic for the Z program.
Thanks in advance.
Kalyan

Guys, be specific in your answers. If you do not know, please refrain from answering.
I am really sorry to state that in this site and also in other similar websites, people just answer questions without knowing what they are talking about.
I can understand, novices asking questions. But the same novices should not try to answer questions which they do not understand.
I am sorry to make these comments. But I want this to be a quality site where Practitioners can come and find real answers to questions. I am sure there will be people out their who will support my viewpoint. This will help make the forum more useful. Otherwise somebody seeking an answer to his/her question may spend hours and end up without an answer.
Kalyan

Version 4.6c Cross Company Code Incoming payment to lockbox.

In version 4.6c I am trying to find out the correct IMG configuration for processing incoming payments to a lockbox when multiple companies are using one company for banking. Here is what I have done so far:
Here are the company codes: 2100 has house banks and lockbox set up.
0980 does not have house bank or lockbox.
OX16 - all both company codes involved are assigned to the same Company.
OBVU - Non-bank company code 0980 has 2100 set up as Paying Company Code
OBYA - Clearing accounts have been set up between 0980-2100.
OB05 - Accounting Clerk has been set up for both company codes.
OB10 - Lockbox from 2100 has been set up for 0980. Even though 0980 does not have a House bank set up, IMG Configuration did allow the lockbox and house bank for 2100 to be saved under 0980.
OB96 - Forms to be used were linked to 0980
One issue we are having is that when we attempt to set up a Customer for 0980 a field for Lockbox is required to be entered. When the 2100 Lockbox is input, an error message pops up saying that 0980 does not have a House Bank.
Can someone please explain how to complete the configuration for this type of activity in version 4.6c? Also should we be using F-28, FB05 or some other t-code to post incoming payments.

Hello,
You can post the cross company code postings even between two controlling areas. The system does not prevent to post documents between two company codes in two controlling area. Need not necessarily they should be under one operating concern. Provided you have to make sure that you have followed the following points:
In OBY6 - To company codes must be assigned to same Company, meaning that you mus thave created a Company and that company must have been assigned to these two company codes.
OBYA - You should maintain the clearing accounts in both the company codes. Meaning that you are posting one leg in one company code and the other leg in the other company. Therefore, it is required to have the missing legs in each company code.
Company Code1 - Posting Key 40 - Clearing Account
Company Code1 - Posting Key 50 - Clearing Account
Company Code2 - Positng Key 40 - Clearing Account
Company Code2 - Posting Key 50 - Clearing Account
OB08 - In case if the two company codes have different local (company code) currencies, you may maintain the exchange rates.
You can now go to F-02 and post a cross company code transaction giving the first leg in first company code and the second leg in second company code. Missing leg in the first company code will be posted to the GL Account mentioned in OBYA and the missing leg in the second company code will be posted to the GL Account mentioned in OBYA. That means you will have four line items overall.
The system will post three document.
Document 1 in First Company Code
Document 2 in Second Company Code
and
Document3 - Cross Company Code Document.
The cross company code document consists of the first company code document number plus company code plus last two digits of the fiscal year.
Hope this must have clarified your doubts.
Please let me know in case if you need further details.
Thanks,
Ravi

Cross Company Code Incoming Payment Clearing

Dear All
Good day to you.
I would be grateful if I could get advice on the following:
Process:
Company Code A is receiving Payment from Customer Z of Company Code B
Present SAP Treatment
F-02 Company Code A Bank Account is debited and Customer Z of Company Code B is credited.
F-32 Customer Z's Invoice of Company Code B cleared against the Payment received by Company Code A.
Hence this has become a two step process.
Ideal solution needed
In F-28 or similar other transaction
Company Code A Bank Account is debited and Customer Z of Company Code B is credited and clearing also carried out then and there?
To achieve the ideal solution above what are the configurations (if any) needed.
Thanking you in advance.
Regards
Siddique

Hello,
You can post the cross company code postings even between two controlling areas. The system does not prevent to post documents between two company codes in two controlling area. Need not necessarily they should be under one operating concern. Provided you have to make sure that you have followed the following points:
In OBY6 - To company codes must be assigned to same Company, meaning that you mus thave created a Company and that company must have been assigned to these two company codes.
OBYA - You should maintain the clearing accounts in both the company codes. Meaning that you are posting one leg in one company code and the other leg in the other company. Therefore, it is required to have the missing legs in each company code.
Company Code1 - Posting Key 40 - Clearing Account
Company Code1 - Posting Key 50 - Clearing Account
Company Code2 - Positng Key 40 - Clearing Account
Company Code2 - Posting Key 50 - Clearing Account
OB08 - In case if the two company codes have different local (company code) currencies, you may maintain the exchange rates.
You can now go to F-02 and post a cross company code transaction giving the first leg in first company code and the second leg in second company code. Missing leg in the first company code will be posted to the GL Account mentioned in OBYA and the missing leg in the second company code will be posted to the GL Account mentioned in OBYA. That means you will have four line items overall.
The system will post three document.
Document 1 in First Company Code
Document 2 in Second Company Code
and
Document3 - Cross Company Code Document.
The cross company code document consists of the first company code document number plus company code plus last two digits of the fiscal year.
Hope this must have clarified your doubts.
Please let me know in case if you need further details.
Thanks,
Ravi

Cross company posting for incoming payments on manual bank statement

Hello folks, could you please help Toine on this issue?
"We want to post incoming payments in the manual bank statement which
have to be cleared with open items of a debtor in another company code.
What customising settings do we need for such a posting? We are not
able to make the posting in our system."
Thank you.

Hi,
this answer does not help very much, the SAP message also told the same. In customising for transaction 1000, variant 0001 type 04000 is assigned (standard SAP delivery). Therefor I think that the postingrules for the manual bank statement are not correct.
We use two posting rules for a payment:
The first in posting area 1: 40 / bank account number debit; 50 / gl account credit posting type 1
Second in posting area 2: 40 / gl account, no credit postingtype 8
For a payment of a debtor in the same company code this works correct. But if the payment is destined for a different company code (the field for the different company code is in the variant for FF67), this doesn't work. Should we use other posting rules and if so which ones??
Best regards,
Toine

Cross company payment through F-53, error in Check deposit & check issue tr

Hi
I have just joined the community and ready with 3 queries.
Please.......... help me to resolve.
i) While executing the cross company payment ( company code 1300 making payment for vendor in company code 0013) using transaction code F-53, I am getting error 'vendor not defined in company code 1300'.
For F-53 screen, vendor is selected from company code 0013.
I have executed APP (F110) successfully in company code 1300 for paying the same vendor in company code 0013.
ii) For check deposit transaction, error is " entry 1300 is missing in table TO43S'. (1300 is a company code)
iii) For check issue transaction, error is "no batch input data for screen SAPMF05A'
Thanks
Rekha

1. Don't give vendor number in the main screen, give all remaining inouts and press enter, then it'll show the second screen
there you can give the company code and vendor account.
2. Cretae a tolerance group for GL accounts in OBA0.
Don't post more than one query in the same thread.
Rgds
Murali. N

Payment term is not being pickedup in cross company code transaction

Dear Friends,
In one of the cross company code transaction scenarios (MIRO), We post a invoice in HQ books to bill on outside vendor. In subsidiary books one more cross company code document will get generated automatically, as billing on HQ as a vendor. In that second document, payment term is not being pickedup.
eg., A is HQ and B is subsidiary company
I post invoice in A books as B account debit and outside vendor credit.
In B books one more entry will get generated automatically as GRIR account debit and A (defined as vendor in B books) account credit.
In B Books payment terms are maintained in vendor master record (A vendor).
But still the payment terms are not being pickedup in that document. Because of this, it is taking the document date itself as net due date.
Please suggest, how to proceed to pick some payment term in that document.
Regards
Suresh

Hi
Assign the payment terms in Purchase Organisation level in Vendor Master Record.
Regards
Shammi

How to configure Funds Transfers, Cross Company Code Vendor Payments, Bill

Hi All,
Can any one help me, How to configure Funds Transfers, Cross Company Code Vendor Payments, Bill of Exchnage Payments with Automatic Payment Program?
Regards
Chandra

Hi Chandra,
This is what you need to do to configure Cross Company Code Vendor Payments.
Execute transaction code OBYA, when prompted, type in 1st coy code, say A and then 2nd coy code, say B. This would take you to the "Maintain FI Configuration: Automatic Posting - Clearing Accounts" screen.
In the first frame, where you have
Posted in : A
Cleared Against : B
Under Receivable
Debit Posting Key : 01
Account Debit : Account Number (The account can be a G/L account, a customer account or a vendor account)
Under Payable
Credit Posting Key : 31
Account Credit : Account Number (The account can be a G/L account, a customer account or a vendor account).
In the second Frame
Posted in : B
Cleared Against : A
Under Receivable
Debit Posting Key : 01
Account Debit : Account Number (The account can be a G/L account, a customer account or a vendor account)
Under Payable
Credit Posting Key : 31
Account Credit : Account Number (The account can be a G/L account, a customer account or a vendor account).
So, if you are using the Customer/Vendor approach, company A must be set up as both a Customer(Use Txn Code XD01) and a Vendor(USe Txn Code XK01) in Company B and vice versa.
Once you have completed this set-up, you can then use transaction F.13 and/or F13E to carry out your automatic clearing. Alternatively, whenever Payment Run is executed via transaction code F110, this would automatically clear out the payables and receivables in each company code.
However, if you intend to use the G/L approach, then the account numbers would be Inter-coy G/L account for each coy code as defined in the chart of accounts.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

APP Run for Cross Company payment for multiple vendors (F110)

Hi Experts,
Please help in following regards.
C.Cod, ITH and IHK,
Vendors V1, V2 , V3.
The transaction F110 should pay cros company payment, i.e; Payment is done from IHK House bank on behalf of ITH.
Please advise whether i need to develop any custom program or do i need to have any configuration settings to be done.
Please Advice.
Thanks in advance.

Hi,
In T.Code: OBVU, please maintained the Company Code and Paying code relation.
Secondly, you need to customise cross company code transaction in T.Code: OBYA
If found usefull, please assign points.
Regards,
Harish

Cross company payment

HI Experts,
In My company Business wants the follwing secnorio, could any one can help me in this.
Under one company we have 7 co.codes (all are located in different countries), when we purchasing the goods from one vendor(xx) for all the co.codes using different purchase orders.
for example the supplier has issued invoice number 123 in the amount of 1,000,000 with the following purchase order references:
Co.Code       Amount
1000             500,000
3000     374,400
5000     125,600
Total             1,000,000
Currently, because of the system set up wherein purchase orders assigned under a specific company codes is not possible to be posted on a different company code. Hence, our processors end up posting the same invoice in 3 parts. Likewise, payment applications were done as well in 3 parts, in this example
if the abovementioned example is possible to be posted and paid via one document number (some sort of cross company posting).
All three co.codes are in different countries (Co.Code currency is differ) but using same fiscal year Variant and same chart of accounts and same controlling area. One Group currency.
Regards,
suda

you said you are having different POs to diff Comp codes and each PO has its unique reference so how is it possible that the invoice is posted in total. its not going to happen .
but on the controlling side you can post them through allocations

Cross Company code posting is available for recurring payment setup?

Hi All,
I could not find the cross company code field for recurring payment setup with useing T code FBD1.
Vendor is created in paying company code 1000, however, the rent has be booked to cross company code (1001) cost center (2000).
So, while trying to do recurring payment setup, I could not see the field.
I know the alternative option that i can use the "Cost Center(1000)" is assigned to CoCd 1000 and do recurring setup without useing cross company code, later i can post the manual journal for correction (as below), however, I do not want use this option.
Dr/Cr       CoCd                         GL account            Cost Center           Amount
Dr            1001                         Rent account          2000                      XXXXX
Cr            1000                         Rent account          1000                      XXXXX
Please let me know your thoughts on this.
Thanks,
Srinivas

Hi, ok17 is not for cross company,but for CO-FI real time integration.
Ex. you maintained for "RKL     Actual activity allocation" Dr 123 Cr 567
Then while posting activity allocation in CO you'll get posting like Dr 123 Cr 567   (with corresponding CO objects)

Clear incoming payment for two company codes

dear all
i received an incoming payment but it concerns two company codes how to clear it

hi
what do you mean by concerning two company codes?
1. the payment is made by one company code to another company code, both of which are in your system?
2. same payment, part of which for one company code, remaining for another one?
3. centre ar collection, one company code collects money for another compay code?
please clarify
best regards, Lawrence

Cross Company Payments

Hi Guys,
I had raised vendor invoices in company code 2000 for a vendor 1001 and using F-53 I made a cross company paymetns from the company code 1000. Here is that i need to extract a paymetns in the form of a text file to a bank for the payments. Here my question is, do we need no extract the payment document related to company code 1000 or 2000 .I It is easy to fetch payments and incoice records with refer to company code 2000 but i was not able to fetch invoices with refrence to the payment document in company code 1000 . Please some one can light on this.
With Regards
Pradeep N

Hi,
First Rise an invoice through Fb60 in company code 2000 on vendor 1001 and then make a payment through f-53 here select company code 1000 and 1000 bank account while selecting open item selection select other accounts and give company code 2000 and vendor 1001 so it will make a payment.
any doubts get back me
Regards
T N R

Automatically clear the open items for a GL account cross company codes

Hi FICO experts,
Can anyone help me on the following issue urgently?
There are journal entries posted to same GL account with different company code. Is there any way to automatically clear the open items sitting in the GL account in company code A to against the open items for the same GL account in company code B.
The example is below:
Journal in company code A
Dr. 840410      $100
Cr. 111300       $100
Journal in company code B
Dr. 111301   $100
Cr. 840410      $100
Now I want to automatically clear account 840410 by using assignment or text in the journal entry.
It will be highly appreciated for any instructions.
Adele

Hello Adele Wang,
You can enter cross-company code transactions in one step in the General Ledger, Accounts Receivable, and Accounts Payable application components. This function would be used, for example, for centralized procurement or payment.
Integration:For centralized payments, each individual company code enters its own invoices separately, while a central company code pays them. When you are clearing open items, the system makes clearing entries between the company codes participating in the clearing procedure. These clearing entries represent the receivables and payables that exist between the company codes in centralized payment.
Prerequisites:You have specified which company codes are to be processed via a single company code. In this specification, you can distinguish between clearing transactions. You can therefore have different combinations of company codes for incoming and outgoing payments.
You have specified the clearing accounts that record the receivables and payables between the individual company codes. The system posts to these accounts automatically when clearing the open items.
You need to make the required settings in the activity Prepare Cross-Company Code Manual Payments in Customizing for Financial Accounting (Accounts Receivable and Accounts Payable->Business Transactions->Outgoing Payments->Manual Outgoing Payments).
Features:For each company code, the system generates a separate clearing document. A joint transaction number marks these documents as belonging together.
Example:For a clearing transaction (incoming payment, outgoing payment), you have agreed in Customizing that if company code 0001 is specified, open items are also selected from other company codes (0002 and 0003).
Hope I had been able to help you. Please assign points.
Rgds
manish
Clearing can then also be carried out if the account to be cleared has not been created in company code 0001. As long as no items have to be posted to this account in company code 0001, it is not necessary to create a master record for the account in company code 0001.
See also:

Creating Cross Company Code Vendors/Customers.

Hi All,
I'm trying to understand how to create cross company code Vendors and Customers. I've already established the link with configuring OBYA. What I'm not clear is on which company code I should be creating the vendor and customer.
We have two company codes, 2100 & 0980. CC 2100 has the central bank tha pays invoices for CC 0980. I have two issues.
1. What kind of configuration is needed to accept incoming payments into CC 2100 House banks and lockboxes?
2. For intercompany activity between 2100 & 0980 how are the vendor and customer master records set up? I know there needs to be a vendor on the customer master and a customer on the vendor master.
So for 0980 acting like a vendor for 2100 I'm assuming the vendor number for 0980 is set up as a 2100 vendor.
The same is true when acting as a customer. The difference being is that this vendor entered into a field on the customer master and the customer number is entered on a field in the vendor master.
I'm missing how the Vendor record, if created on Company Code 2100 gets linked to Company Code 0980.

For SAP to 'know' that a particular vendor / customer master records represents a specific company code, all these needs to be linked to the same 'company'.
Companies are maintained in T880 (IMG : enterprise structure -> definition -> Fin Acctg -> Define Company
Company code is linked to a company in the cocode config. IMG enterprise structure -> Assignment -> Fin Acctg -> Assign comp. code to company
And finally, the Trading Partner field in the Customer/vendor master is where you assign the company to the cust/vendor.
This setup will eventually allow you to consolidate interco A/R, A/P, etc.. if you need to but is not necessary for the interco process to post.(although you'd want to have it rght from the get go)

Cross company incoming payment

Similar Messages

Maybe you are looking for