Cross dissolve and still frame problem

Sorry for reposting this issue but I am still have problems. In fact, it is extremely frustrating and I don't know why.
I am using FCP X 10.0.8 and when I try to add cross dissolves to some still frames it will not allow me.
I get the following error msg.
The Japanese error msg says that there is insufficient media length outside the clip edge to make a transition. And it asks whether I want to make a ripple trim to the media in order to make the transition. It says that if I decide to do so then the overall project duration will be shortened. However, even if I decide to do the later it will not let me make the cross dessolve.
As you can see there should be enough length outside the clip edge to allow this. Or am I misleading myself in this view?
According to me - and I know that I am a sheer novice at this, there should be enough media length to allow the transition. This is happening in not only cross dissolves but any other dissolve which I attempt to add. The problem seems to be intermittent or varies. If I replace the still frame then sometimes it will allow the transition but effects subsequent frames. Either putting in "flash" or bogus frames - even just a black frame. These I can only detect when I expand the timeline to the very limit. And on some occassions there is nothing whatsoever that seems to be blocking the adding of the cross dissolve. This will be the 3rd time which I have had to restart the project and it is getting rather annoying, not to say that I am approaching the time limit which is adding even more pressure.
Can you suggest what the problem is and how I should go about rectifying it please? Is anybody else having the same issue?
Thanking you,
Mitaka27
Tokyo

This is what I see but it doesn't quite make sense to me. One, I don't know why there should be two AUDIO01 files showing. The still frame which I am trying to add the crossover to is FRTOTSUKA. It will allow me to add to the end but not to the start. The same is happening with a couple of other frames. If I add one to the start it won't allow me to add it to the end.
Hope I am making sense.
Thanking you,
Mitaka27

Similar Messages

HOW DO YOU TURN OFF "FIREFOX PREVENTED THIS PAGE FROM AUTOMATICALLY RELOADING". I did the "see Advanced - General - Accessiblity. and still having problems

HOW DO YOU TURN OFF "FIREFOX PREVENTED THIS PAGE FROM AUTOMATICALLY RELOADING". I did perform the "see Advanced - General - Accessibility. It worked for me and my "user" site (don't know how to say my site) and still having problems with my wife's. I have gone to OPTIONS → GONE TO → ADVANCE and CLICKED THE LINE → ""Warn me when websites try to redirect or reload the page…""
This did not rememdy the problem. I did try to get on the other site suggested
http://kb.mozillazine.org/Accessibility.blockautorefresh
but got a 404 error...
I have googled the "ff prevented...." and after a number of hours searching I still have not found a fix...
REALLY HOPE SOMEONE CAN HELP ME....
JM

You should still disable this setting:
*Firefox > Options/Preferences > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
The setting in "Options > Advanced > General" is meant as an accessibility feature, as you can see by the label of that section, so that people with disabilities or people who use screen readers do not get confused and is not meant as a safety protection to stop redirecting.
What is the value of the <b>accessibility.blockautorefresh</b> pref on the <b>about:config</b> page?
*http://kb.mozillazine.org/accessibility.blockautorefresh
If you have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you have too many live channels

I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?

Quote from: Richard on 15-November-07, 20:33:05
tornado2003,
What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
After that boot normally and install the latest nVidia ForceWare Drivers
Take Care,
Richard
i guess you missed that:
Quote from: tornado2003 on 15-November-07, 17:26:52
ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd)

HT3702 i have updated my billing information and still can't update the existing Apps. I changed the credit card and still same problem

I have updated my billing information and still can't update my existing apps , i ahve changed the payment card and still same problem ,what shall i do ?

It's a credit card, not a debit card ? As far as I know that message will show if you are trying to use a card that was not issued by a bank in the same country as where your iTunes account is based (and you need to be in that country). If you are sure that it is then you could try contacting iTunes Support and see if they can help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Lost a cross dissolve and can't replace it

I used a 5 sec cross dissolve function to smooth out a place where I edited out unnecessary footage. Then I detached original audio and spliced a second audio track over part of the video. Now I've lost my cross dissolve and there is a 5 sec black out at that point in the footage. When I try to add back a cross-dissolve FCP X puts it at the beginning of the timeline and won't let me overlay it at the original spot, which is just before the new synced audio track starts.

You can leave the home page setting empty to make Firefox use the build-in about:home home page.
*https://support.mozilla.com/kb/How+to+set+the+home+page

Intermittent problem with cross dissolve and chroma key

It seems that in 1 out of 10 videos I produce in Final Cut Pro there is a problem with the cross dissolve effect and chroma key. What happens is that during the cross dissolve, clip A fades out with a green tint and clip B fades in with a green tint.
Today I am working with two videos that I captured using the same work flow on the same day. One project exhibits the tint while the second project does not. If I import the problematic footage into the good project the tint problem follows the footage. In the good footage, the cross dissolve produces a result that does not have a green tint. If I re-capture the "bad" footage the results are the same.
Has anyone else experienced this and does anyone have an idea how to resolve this problem?
Thank you.
Dual G5 Mac OS X (10.4.6)

In my project, both clips are source clips with Chroma, Color Smoothing and Matte Choker applied. A dissolve from non-chroma clip to chroma clip works fine. Only problem is with two chroma clips. In my dissolve, the error appears as red fringing in the area between the two masks.< </div>
You're using creative shorthand that doesn't help. "Chroma clip" means the clip to which you have applied all of these effects? What masks? Where are you getting the masks?
To understand what's going on with all them itty bitty pixels in a stack of interactive effects, do me a favor: render out a short piece, say 10 seconds of each of your chromaclips as separate movies over transparency using the Animation codec. Reimport them and put them over a solid colored Dissolve between them using different types of dissolves. Post back and tell us (me) what's going on.
I still consider this to be a bug -- nesting adds more steps to the workflow than if this bug did not exist. < </div>
It's not a bug. Your pixels are running down a pathway. It's a question of building the correct pathway and having the correct pixel wranglers with the right kinds of cattle prods.
bogiesan

Problem with Cross Dissolve and Opacity

I've been noticing that Cross Dissolve has been acting goofey for awhile but have overcome any problems by manually adjusting opacity settings. However, this time I can't get either to cooperate. Notice the line appearing below the phrase "the nutrient recommendation map" in the image below. This line or a similar line will appear as title either cross dissolve into one another or if they are stand alone and the opacity settings fade them in and out. The blinking of the lines is sporadic and changes as I make adjustments. I'll "fix" one spot but they will start to blink at other points in the time line and in different areas.
Any ideas?

I ask because I think I'm having a similar problem. Went home and updated PPro to 5.0.3 and still have the issue.
The screen shot here show the first seconds of an HDV30/60 sequence as the video fades in (bottom layer - lasts about 2 seconds). The top layer is a mask to create the effect of a cinescope camera (no fade). I've cropped the left for demo purposes.
The bottom layer is regular ol' HDV footage. The top layer was created using a Photoshop file with 2 squares using the shape tool and colored black.
For pre-view and render, you can see a light-colored hair line around the top mask. I've applied different effect to remove it, but it won't work. In fact, some effects make it stand out even more. I've also tried using other assets from the PSD (PNG, PPro black video, etc). I also tried the cropping work-around but it did not work.
The screenshot is subtle but it's there. The main thing is that it can be VERY noticable in the BD-R discs I've created played back on set-top players so I'm really hoping there is a fix for it. I did notice that it will appear when I scrub with my finger on the left mouse key. As soon as I let go it appears again.
So PPro is up to date, graphics card is up to date, and I've tried suggested fixes and a few of my own with no luck. Any ideas?
Thanks,
Erik

Creating cross-dissolve from still photo to video

Hello all ...
I'm try to create a simple cross-dissolve between a black-and-white photo (imported into FCE as an RGB Photoshop file) and a color (1440x1080) video clip. My problem is that FCE will only insert the dissolve on the right (video) side of the edit, the result being that the photo abruptly goes to black, followed by a gradual fading-in of the video. This is not the effect I want – I'm hoping to create a smoother transition between the two. I suspect that I haven't saved the still photo in the correct format, but I can't seem to find any help in my various FCE books.
So: How do I apply the transition to both sides of the edit? Is it even possible?
Thanks in advance for any and all advice.
Alec

Tom, I figured it out. The audio for the video clip was overlapping the edit (i.e. it extended to the left, so that the video clip's audio ran under the still pic). When I got rid of the (easily replaced) audio, the regular cross-dissolve worked.
Now I just need to figure out how to make the transition last longer than 13 frames!
Thanks for your prompt responses ... I really appreciate it.
Merry Christmas!

Cross-dissolve from white frame to adjustment layer no longer works in CC 2014

Windows 7, Premiere Pro CC 2014
I have a video clip in a nested sequence on V1 and an adjustment layer on V2.
I want to dissolve from a white frame to the clip using the adjustment layer.
In PP CC (not 2014) this was simple:
Starting with a white PNG graphic on V2, cross-dissolve to the adjustment layer.
However, in PP CC 2014, this causes a dissolve to BLACK over the duration of the dissolve and then a CUT to the video.
This behavior in CC 2014 is illogical. Why has it changed?
There are other ways to do this, but this one was quick and easy, and is required for hundreds of clips in existing sequences / projects.
Response from support via live chat:
thank you for your patience
the adjustment is layer is not functioning properly
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
please mention it in the feature/bug request form

For me with a color matte it shows exactly the same behavior as with a PNG.
You're dissolving between the matte and the adjustment layer on V2?

Cross Dissolves and Rendering Issues

I am having trouble with FCP 5. My cross dissolves don't work. When I put on in (to fade up from black), they don't do anything. This is not a huge deal because I can just use opacity key frames.
However, I am having another issue. I have three layers of video set up to make a sort of "grid effect" . I have three layers of video, on the left, middle, and right. They are cropped so they do not overlap each other.
When I play back the timeline in preview mode (without rendering) everything plays back fine, but at lower quality.
However, when I render my sequence, the middle box vanishes.
I am using Unlimited RT. I have tried setting the sequence in all three video processing options (RGB, YUV, and high precision YUV).
I have tried making a duplicate copy of my sequence, I have made a duplicate copy of my project as well.
I have trashed my preferences and have restarted my computer about 10 times.
Any suggestions?
Thanks!

Hey there Jim--thanks for the thought,
yeah, I'm famailiar w/ that mode of attack--
essentially, the images are scans of a childrens book made into a DVD---all of these images will be 'deep-etched' and 2.5d'd in AE then re-imported so for all intents and purposes, I'm just slamming together a rough, (pre-photoshop/AE) and just trying to get an approximate timing/flow of each image. So it's easier/faster for me to have 'snap' toggled and be able to slam clips/slugs next to each other as opposed to 'stacking' them, 'checkerboard' style, and approximating where to place them---
I guess if it's just a rough, it doesn't matter either way, to each his own.
I was just looking for a shortcut--but what a cool feature that would be eh? ..being able to lock keyframes to crossdisolves?
so, how are things in Milford??
thanks for re:

Read the fixes and still having problems. Firefox will not open at all and I receive a crash report upon launch. Have restarted, shut down, run virus and malware checks and even tried downloading and reinstalling with no response. Please assist.

Read the fixes. Cannot open Firefox in safe mode. Have tried reinstalling Firefox. Crash occurs each time I try to launch Firefox. Have run scans, checked for malware, spyware, installed all windows updates and still no luck.
Have accessed my crash reports. One of the reasons indicated is:
GenuineIntel family 6 model 23 stepping 10
Crash Reason
EXCEPTION_ACCESS_VIOLATION_WRITE
Have no idea how to fix this and have had crash reports since yesterday evening.
Signature: nsStandardURL::SchemeIs(char const*, int*)

Sorry believe something got miscommunicated. Wasn't trying to qualify firefox as malware - was terming it that way because the malware was crashing Firefox and no other issue. Worked on it and had isolated the virus in avast (put it in the chest) and was searching for assistance on why even after isolating the virus and restarting (some forums had indicated to then uninstall and reinstall Firefox, which I did), still would not launch without the crash report.
Worked the problem and eventually installed a 5.0 version of Firefox and it launches. Only seems to have the crash report with 6.0 or higher.
The forums had suggested that if after isolating the malware in avast or disinfecting it with MBAM (tried that too), to uninstall and then reinstall the latest version of firefox. That's when I tried the older versions. Had run a boot log scan as well and didn't see any additional problems. Just can't launch in 6.0 or higher.

I downloaded the itunes update today and now my itunes won't work at all. It keeps saying I don't have MSVCR80.dll installed and to reinstall itunes. I have tried to reinstall it 3x and still same problem. Now I can access anything on my itunes. Help!

It keeps sating that MSVCR80.dll did not install correctly and to try installing Itunes again. I have tried installing 3x and still same thing. I cannot access any of my music, podcast or books on itunes, it won't open. What can I do?

You need to restore your iPad using recovery mode and the process is covered in this article.
iPad: Unable to update or restore.
http://support.apple.com/kb/ht4097

My phone is saying my SIM card is not in it. It is and I have removed and reseated it and still shows problem? Next step?

My phone started up this AM with a message my SIM card is not being detected. I took it out and put it back and still have this message. The phone has gone into a cycle of rebooting looking for the card that is there.....so there is an issue. What next? Phone is only 7 months old. Do I go back to the SAMS Club where I got it and see if they can address it or do I go the VW store locally? Help?

Try pulling the battery for 30 seconds then reboot the phone. If that doesn't work go to the verizion store and see if a new sim card will work. Then there is always the factory reset, which the store might have you do if the new sim card doesn't work.

My iphone sometimes rings and sometimes goes to VM. I have tried powering down and still having problem

My iphone sometimes rings and sometimes goes to VM. I have tried powering down and still having problem

solved phone in do not disturb mode

Ipod touch -cannot connect to itunes store:wifi connection works, tried reset and still have problem, submitted request for help to apple and they pointed me to a bunch of articles that were of no help, already had tried so I wrote to them, Help

cannot connect to itunes store
wifi works and confirmed by accessing google & ew.com
tried reset and removed everything from ipod
still receive error cannot connect to itunes store
did google search and could not find a solution. found other's also asking for help
sent request to apple and received response with list of articles. already tried these and still don't have answer. inluded ipod model and serial number (ma62ll / 9c740wffw4n) thinking this might help them provide a specific solution.
version: 1.1.5 (4b1)
help, i want to connect to itunes,

Try:
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors | iPad Insight

Cross dissolve and still frame problem

Similar Messages

Maybe you are looking for