Cross Dissolve turns to flashing green/gray after export

Hey guys, I just edited a video that needs to be released by 3pm tomorrow on YouTube.
Everything went good while editing, but once I exported, I noticed in the final version, everywhere where I had used crossdissolve, the movie flashes green and gray, untill the crossdissolve is done.
All clips I'm editing are .MOV from a canon 60d, and I'm editing with FinalCutPro7
on my brand new macbook pro. This is very urgent!

Hi -
Did you convert the footage from your DSLR to a genuine editing codec like ProRes LT prior to editing, or are you attempting to edit the native camera files?
Click on any source clip from the camera and type Command + 9. Report the item properties, or if easier, just post a screen shot.
Then click anywhere on the timeline and type Command + 0 (zero) and report what the Sequence Settings are, or if easier, post a screen shot.
Thanks
MtD

Similar Messages

TS4436 Iphone 4 camera worked fine for 2 years then turned all flash photos red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?

Iphone 4 camera worked fine for 2 years then all photos with flash came out as red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

White background appears "gray" after export

Hello, I have created a short video with a white background (title screen) and no matter what compression settings I use to export the file to Quicktime, I always have the same problem -- the white background appears gray in the final video (with the exception of the uncompressed YUV422 setting).
Does anyone know why this is happening? Thanks!
Windows XP Pro Quicktime Pro 7.1.3

Do you think this has anything to do with the default color corrections? Can I disable them altogether?

Is there a better Cross Dissolve method and associated problem?

I have been using Cross Dissolve for some time now. I have searched and reviewed cross dissolve help in the forum without so far finding better information or a solution.
My method:
- razor at the point to be dissolved
- drag the Cross Dissolve to the razor point
- click the dissolve to select the length required
- razor each end of the dissolve length
- right click each razored section with a ripple delete
- reapply the cross dissolve and reselect the length
I find this works for me but could be simpler. I ripple delete the razored sections because if I do not, the cross dissolves overlap previous sections prior and after the selected clips in the whole video sequence such that the effect appears not to work. Ripple deleting ensures that the previous sections are within the selected clips. There has to be a faster way.
My problem:
This happens after many successful cross dissolves in a Project as though I have run out of allowable times it can be used. When I try to ripple delete the razored sections, the ripple delete does not work no matter what I do.
What can I do better or correctly to cross dissolve and how can I deal with untimely failed ripple deletes?

I was not implying anything about your "experience" or otherwise although your method did actualy indicate a lack of editing experience..
It was you that asked for a more simpler, faster way to do one of the most fundamental editing functions. A cross dissolve.
I find this works for me but could be simpler. I ripple delete the razored sections because if I do not, the cross dissolves overlap previous sections prior and after the selected clips in the whole video sequence such that the effect appears not to work. Ripple deleting ensures that the previous sections are within the selected clips. There has to be a faster way.
I do not know how or why you developed the method you described...
My method:
- razor at the point to be dissolved
- drag the Cross Dissolve to the razor point
- click the dissolve to select the length required
- razor each end of the dissolve length
- right click each razored section with a ripple delete
- reapply the cross dissolve and reselect the length
but it certainly is unique ....if somewhat cumbersome and time consuming.
I only offered the advice that lead you to a "simpler , faster " way of doing a very simple function.
Your post number 4. Yes you have misinterpreted that setting.
Stephen kind of unintentionally mislead you by using the term Pre and Post roll when he should have said " handles". (ie edit the clip knowing you have additional frames either end to create a fade from.

Added automatic transitions - pictures flash during cross-dissolve

Hi
I added automatic transitions (cross-dissolve for .5 seconds) to my project (45 minutes). It's mostly 7-second pictures with a few movies here and there - but after watching it in iMovie, after the 5th or 6th picture, there are short blips/flashes of other previously seen pictures during the cross-dissolve transition...is this only in iMovie or if I export it will it be like this too?
Thanks

I haven't seen this issue, but it should not be a problem when you export.
If you would like to test it without sharing your whole 45 minute movie, you can go into the project list, and DUPLICATE your project by right-clicking on the project name. Then delete all but the first 5-6 minutes from the duplicate project, and share it.

HP Monitor L1710 -- power light flashes green when I turn on PC, screen flickers black w/ no image

Hello,
Last night I turned off my PC w/ a HP Monitor L1710, which I did not turn off. When I turned on my PC this morning the screen does not "turn on" -- the green light next to the power button flashes on and off, and the screen flickers between shades of black, like it's trying to turn of. This PC usually is not turned off at night (this is a work PC, and I just started to working at this desk (almost) never turned the PC off at night, so I wonder if it has something to do with that. I've turned the PC on and off multiple times, unplugged the power cable (for the monitor) and cable that runs from the monitor to the PC. I believe the PC is on (cd drive opens and closes, recognizes my phone when I plug it in to charge), so I don't think that is the problem.
I see a lot online that it may be stuck in power saving mode.
Any thoughts? Any help or ideas would be greatly appreciated
Tom D.

Hello @tom_degennaro,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your monitor is not coming on when you turn on your PC. I am setting out some steps for you to try for you to try below:
Step 1. Unplug the power cord from the monitor and the wall outlet
Step 2. Hold the power button down for one minute
Step 3. Plug the power cord back into the monitor and then the wall outlet (not a powerbar or surge protector)
Step 4. Press the Menu button on the front of the monitor
Step 5. Navigate to the Factory Reset option and select it.
If the issue still persists after the above steps try the monitor on another computer. If the monitor still does not work at that point then, it appears to be a physical issue and I think it would be best if you contact HP Technical Support for repair options.
If however the monitor works on another computer you have an issue with the computer it was originally on. If the computer is an HP computer I would be happy to assist you with, but first I would encourage you to post your product number for the computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

My ipod shuffle 2nd gen suddenly stops playing music after 15-20 mins.First it flashes green light and then flashes red light rapidly. Any solution to this ?

My ipod shuffle 2nd gen suddenly stops playing music after 15-20 mins.First it flashes green light and then flashes red light rapidly. Any solution to this ?

A 2nd gen shuffle is about six year old at this point. The likely cause is a battery that is worn out, with greatly reduced capacity or inability to hold a charge. The initial green light shows a good charge. The red light means the battery is drained.
Since the shuffle still appears in iTunes, you can try doing a Restore in case the cause is related to corrupted software on the shuffle. The Restore button is on the shuffle's Settings screen in iTunes. This will erase the shuffle, re-install its software, and set it to default settings.
Also, when the light becomes red and the shuffle stops playing, try turning OFF the shuffle for at least ten seconds. Then, turn it back ON. This resets the shuffle. Does it play again? If it does, let it play until it no longer plays again. Repeat turning it OFF and ON until it no longer plays. Then, connect it to power and charge it to full. See if that makes any difference.
If that does not help, the solution is to replace the battery. If you have a repair shop do it, the cost is probably uneconomical, compared to the cost of a brand new 4th gen shuffle ($50) that has more features, and a new set of headphones, plus a one-year warranty.
If you are good at such things, this web site has repair guides
http://www.ifixit.com/Device/iPod_Shuffle

Background disappears after adding a cross dissolve to a keyed clip.

I have a clip that has a Keying filter (as well as being cropped and scaled down) on it over a white background. After adding a Cross Dissolve to the keyed clip, the white background disappears for the duration of the Cross Dissolve, leaving a black background behind the keyed clip. This black background is present both in preview and after rendering.
Any advice?

not positive this will help, but try this:
remove the transition
right-click and sselect "make compound clip" (or Option G)
within the compound clip, drop a white solid under the keyed clip; do not place any transitions at either end of the compound clip.
return to your storyline / sequence
place your transition again and see if it's fixed
if you still do not have a clean dissolve, remove the transition and then click once on the compound clip and go to around 8 or 12 frames before the end and in the inspector, go to the opacity and add a keyframe and then arrow right to the frame before the last frame and add another keyframe and drag the opacity value to zero.

SG 200-08 All LED lights flashing green after power failure

Thinking back, about a month ago I updated the firmware (sorry I can't check version at the moment). The switch has been working fine since then. Today I needed to move some power cables and the switch lost power. Now ALL of the LED lights are flashing green and I can't access the switch. I've tried setting a static IP on my laptop to 192.168.1.20, mask 255.255.255.0, and accessing the switch on 192.168.1.254, but there's no response. I've tried holding in the reset button for at least 30 seconds while the switch is powered on, AND while powering it on. None of that has worked. Also when I first power it on, the system LED flashes orange very quickly for a second or so, then all of the LEDS start flashing green.
What am I missing?

Its been a few months, so I don't remember the details, but I think it was a combination of using the reset button and then opening a browser to the default IP address. If you look at the screenshot I posted it has the IP address I used. I downloaded the firmware again and the webpage in the screenshot is where the router is asking me for the location of the firmware I downloaded. After it finished reloading the firmware it worked again.

Editing: Cross Dissolve Transition briefly turns black can it be white

Cross Dissolve Transition applied two clips briefly turns black can it be white or not go to black? Thxs.

I do have the Cross Dissolve window up that looks like the Transition Editor in the Manual, only it only shows the top half (pyramid w/start and end percent) but no additional palette no effects section with color square, etc.
Thxs.

Premiere Pro CC 2014 Not Passing Cross Dissolve to After Effects

I know this was a bug a few years ago with CS5 and has been fixed since CS5.5. But I appear to be having the same problem after upgrading to CC 2014.
When I import a Premiere sequence into AE the cross dissolve information is not being read by AE. Instead I get a black layer below my footage layer, the length of my cross dissolve saying cross dissolve.
Here's a screen shot of how the project looks once imported into Premiere.
Anyone else experiencing this?

Did you find any solution for this? Having the same problem here...

Why can't I apply a cross dissolve between an after effects comp and black video in Premiere CS6

I imported a 20 second composition from AE CS6 into Premiere Pro CS6 and would like to apply a cross dissolve transition between it and the media on either end of the AE clip. However, every time I try to apply the cross dissolve, it only gets applied to the AE clip. I can't apply any transitions that straddle the AE composition and anything else. For example, I have a 5 second black video before the comp and a jpg graphic after the comp. I have tried to apply a cross dissolve to both ends, but the cross dissovle only gets placed on the AE comp no matter how I try to apply it.
Any suggestions would be greatly appreciated.

When you playback the Timeline, with the Cross-Dissolve applied to the AE Comp (on both ends), how do the Transitions playback?
For more info on Handles, this article might be helpful: http://forums.adobe.com/message/3727485#3727485
Good luck,
Hunt

After rendering, video track turns a solid green?

Using FCE 3.5, after rendering video, the audio track works, but the video track is all just a solid green frame. No video whatesover, only green. Any ideas on how to fix this??? Thanks so much.

First, what effect(s) are you applying? Are there settings in the effect that might be turning the video green? Are you trying to chroma key a green screen?
Also, details help. Exactly what model Mac are you using? What version of OS X? What are your sequence settings? What is the source of the video clip? Clip properties? Any other effects you are using on the same clip(s)?

Transitions -- Cross Dissolve: FLASH FRAME

When I insert a Cross Dissolve, 15-20% of the time there is one frame black at the end, ruining the transition. (Black flash frame).
Tried deleting transition, reapplying - no luck.
How can I be rid of this?

This is a total shot into the blue, so please be patient...
Have you looked at what all those clips that exhibit this problem may have in common? Perhaps all of them have an odd number of frames? If so, you may be onto a way to work around the problem.
If it's just the last frame, you may try to simply 'split at playhead' at the final transition frame, and delete the last frame, not the whole transition.
I know that this is annoying at best, but maybe woth a shot.
Hope this helps,
-ch
Please Note:
I work for cf/x, and may profit from posting here.

HT2421 airport express sign green light after 2 5 minot it turn off

airport express sign green light after 2 or 5 minot it turn off automaticaly

I've solved this by resetting my wireless internet connection at the box and then setting up airport express again.
I don't know whether that will help you.....

Cross Dissolve turns to flashing green/gray after export

Similar Messages

Maybe you are looking for