Cross-Docking Planning (TR x Delivery)

Hello,
I'm working with Cross-Docking in the ECC 6.0... And I had sucess with the matching between a Inbound TR and Outbound TR (The same category)!!!
But, I can't to do the matching between a Inbound TR and Outbound Delivery...
Could anyone tell me if this combination possible?
Thanks in advance.
Regards
Diego

Hello,
Can anyone reply this?
I don´t have a solution yet.
Thanks a lot,
Jesus

Similar Messages

  • Inbound deliveries not appearing Cross dock plan

    Hi,
    I am setting up Cross docking. However, inbound deliveries do not show up in the Cross dock planning screen. They only appear when I create a PGI for the inbound delivery.
    Message I get is :
    No inbound documents have been selected for planning
    Message no. LXDCK003
    What do I need to do in order to have the Inbound deliveries appear?
    Thanks

    Had you find a solution?? I have the same problem, I can´t see the inbound delivery in the cross docking monitor. RG, Daniel

  • Cross docking - planning not possible

    I have set the customizing settings (maintain warehouse level settings ; defince cross-docking relevancy for movement type 101 and 350 ; maintain number rangers) for cross docking but I am still not able to link an inbound TR to a outound TR (same quantity / material).
    The error messages "No matching inbound documents found" occurs when I try to "Plan the cross-docking".
    Scenario
    outbound TR for KANBAN WM replenishement (mvt 350)
    inbound TR for goods receipt posting (mvt 101)
    Thank you in advance!

    Hello,
    Can anyone reply this?
    I don´t have a solution yet.
    Thanks a lot,
    Jesus

  • Cross Docking Pick TO cancellation

    Hi Experts
    I am trying to Configure the Cross docking scenario
    I have configured the following
    1. Cross-dock Warehouse level customization in SPRO-LE-WM-Cross Docking-Maintain Warehouse level Settings
    2. Cross dock relevancy for movement types in SPRO-LE-WM-Cross Docking-Define Cross docking relevancy for movement types
    3. There is no Pre-allocated stock check for both movement types 101 and 601
    4. Stock placement and stock removal confirmation required for storage types 902 and 916.
    Transaction Steps:
    1.Outbound delivery, TO created
    2.Inbound delivery created, GR done, while creating Putaway TO system is moving the stock from 902 storage type to 916 storage type
    But the pick TO created against the Outbound delivery is not cancelled and the Outbound delivery is not updated with the Putaway TO.
    Which step or config i am missing?
    Regards
    Venkat

    Hi, you have two options to configure cross-docking. Take a look at these documents for detailed explanation.
    1) Planned Cross-Docking
    Planned Cross-Docking - Cross-Docking (LE-WM-DCK) - SAP Library
    2) Opportunistic Cross-Docking
    Opportunistic Cross-Docking - Cross-Docking (LE-WM-DCK) - SAP Library
    I figure you are using opportunistic xDck based on your question.
    Could you just go through all the steps on the document I linked?
    Just go through all of the requirements, carefully inspecting if any
    of those doesn't match the process.
    First you have the settings required. Make sure they are OK.
    Then check the process flow and your documents you are testing
    with.

  • System ignoring cross-docking decision during LT0F

    Hi all,
    I'm trying to do some planned cross-docking between and inbound delivery and a TR for production supply.
    I've created a CD decision which is sitting there waiting, however when I create the putaway TO via LT0F for inbound delivery, the TO is created ignoring completely the CD decision which is linking that delivery item to the TR.
    Any suggestions - and please don't just post a link to the SAP help prerequisites - I've already been through this!
    Regards,
    Mark.

    HI
    The second point says that the quantity in inbound delivery and outbound delivery should same as Pallitization data maintained in the material master WM 2 view(LE quantity)or multiples of it.
    If you have a quantity less than the Palletization Quantityin the deliveries then the deliveries will not appear in the Cross dock moniter.
    LE quantity: 20 in the material master
    your deliveries qty should be 20 or multiples of 20.
    please try with this.
    Regards
    Srinivas

  • Cross-Dock: No inbound docs have been selected for planning

    Hi everybody here,
    I am testing cross-docking function on our DEV environment. I set the warehouse 001 as one-step crossdocking and no opportunistic cross-docking allowed, not consider FIFO. The time ref. is delivery date & time, time window is set to 72H, release time is 2H and latest relase time is 1H.
    Then I set movement type 501 and 201 as cross-docking relevancy.
    I created 2 TRs with movement 501 and 201 with same material and same quantities. The 501 TR's planning time is 12:00, Aug 17 and The 201 TR is 23:00 Aug 17. However, when i run LXDCK to plan a cross docking with these 2 TRs, system prompts an error message "No inbound docs have been selected for planning".
    If you guys have implementation experience of cross-docking, please give me some advice, many thanks!
    Leon Xiao

    Hi,
    I am facing a similar problem, were you able to find out the reason for the problem?
    Any help is appreciated
    Thanks in advance,
    Mike

  • Cross Docking with LE-WM - or - Reactivating Back Orders upon Goods Receipt

    I have been reviewing the documentation for Opportunistic and Planned Cross Docking in LE-WM. The requirement is to release Back Orders upon receipt of a shipment to avoid putting them away and picking them right away from the bin. We want to release the Back Orders for picking in the GR area at the time of receipt.
    So far it appears that Opportunistic Cross Docking depends on a Transfer Order already existing. The system then cancels the existing TO and replaces it with a TO to pick from the receipt Storage Type.
    Planned Cross Docking appears to require an existing Outbound Delivery to the expected Inbound Delivery.
    In the case of a Back Order, no Outbound Delivery or Transfer Order exist since there is no stock to release until the goods are received.
    Is there a way to release Back Orders to be picked directly from Goods Receipt?
    Thanks;
    Jim

    The problem is that all the information I found so far about it is over the process of external goods coming and sending they out without the need of storing in the warehouse. They go directly to the picking area (one step) or in two step process  going first from 902 (Good receive from external) to Cross docking Sorage type.and another movement  from Cross Docking Storage type to 916 Good issue Storage type.
    I need to know if it is possible to implement a solution of Cross Docking for certain number of products having a factory and a warehouse. If so, would you give me a brief process flow?.
    Thank You very much.
    Al
    Edited by: agmogena on Aug 22, 2011 12:01 PM

  • Cross Docking in SAP R/3 ECC 6.0

    Folks,
    I'm struggling to make 2-step w/ planned cross docking work. Basically, unable to connect the planned with the candidate document.
    Here is the scenario:
    1. (Candidate) Outbound delivery created with a delivery date / time of 09/04/08 - 10:00 (No TO initiated)
    2. (Planned) Inbound delivery created with a delivery date / time of 09/04/08 - 12:00 (No TO initiated)
    The system invokes different messages based on the following config. settings: (These messages occur when I right click on the inbound delivery and select "plan cross docking")
    Setting 1:
    Planning time: 1 D
    Default Release: 1D
    Def Latest Release: -
    Message: No inbound documents have been selected for planning
    Setting 2:
    Planning time: 1 D
    Default Release: 1D
    Def Latest Release: 1D
    Message: Time ref. 09/04/2008 10:00:00 of plan.doc. xxxxxxxxx does not match cand.documents time refs
    BTW, it's a simple setup WITHOUT transportation, yard management, HUM or SUT.
    Thanks in advance for your valuable comments!!

    Dear Christiane,
    First & foremost appreciate your quick response.
    As per what you say (& If I have understood it correctly) having the Delivery Date & Time of the Inbound as 09.04.2010 10:00 would solve the issue ? I did change the Inbound Delivery time but to no avail.......as per my example.....what do you think should be the Inbound/Outbound Date & Time
    If I understood right, as per my example, the Outbound Delivery time is set to 12:00, the latest release time is set to 1 hr thus the latest time for the outbound to be released is 11:00 (Outbound Del time - latest rel time)
    Planning time is again 1hr, so planning window is from 10:00 to 11:00 - [(Outbound Del time - latest rel time) - Planning time]. Hence if I set the Inbound time to 10:00 it should work right ?
    The release time, what effect does this have ?
    Looking forward to your help.
    Imran

  • Cross Docking Process Flow - ECC6.0

    Hi,
    Can some explain what is the process flow for cross docking in ECC 6.0. How to mark a customer as Cross docking customer?
    Thi sis the process flow we are trying to map in ECC6.0 for croos docking.Please let me know is this process flow can me mapped in ECC? Thanks
    •     Goods Receipt
    •     X-dock temporary bin allocated
    •     Put-away label printed [X-dock put-away bin]
    •     Delivery created
    •     Picking TO created
    •     Picking TO confirmed
    •     Packing created
    •     Delivery Note printed
    •     Shipping labels printed
    •     Post Goods Issue posted

    Hello,
    For Oppertunistic Cross dock..
    You need to create either Putaway TO/Pick TO and then system checks the cross doc and cancel the TO and create a new TO from 902 to 916. and also updates in the document flow. This  you can do with out Cross dock monitor. With out planning the cross dock you can do the cross docking by following the config in help.sap.com.
    for more information about the complete config you need to see the sap link below. sure it will help you.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
    thanks.
    tkreddy

  • Cross docking in WM

    HI,
    can anyone explain about the usage of cross docking functionality and how to use it.
    how to link an inbound docume

    Hi Susil,
    Cross-docking implies moving materials directly from the incoming to the outgoing physical areas of the warehouse. To process these materials without first putting them into storage, the warehouse must be aware of what deliveries are coming in and which deliveries are going out.
    Inbound delivery helps in planning of incoming Materials in the Warehouse hence can make use of effective implementation of Cross Docking.
    Cross docking can be monitored using Cross Docking Monitor. Details of the Cross docking monitor are well explained in the link below
    http://help.sap.com/SCENARIOS_BUS2004/helpdata/EN/fc/efc43f82ab6d3fe10000000a114084/content.htm
    Regards,
    Ramakrishna

  • Cross-Docking, Deliveries and availability check

    Friends & Gurus,
    From what I read, Cross Docking (ECC 6.0) works with deliveries. I can link an inbound to an outbound delivery so as soon as the goods are received they head straight to the outbound delivery.
    If I plan to use X-Docking for stockouts, how can I link the deliveries if the outbound cannot be created because of availabity check (no stock on hand).
    Question: Should I change the availability check of the outbound deliveries so I can create them without stock on hand in order to use X-Docking functionality?
    Thanks stranger!

    Hi
    If you are talking about blocked stock you can remove the check for blocked stock in OPJJ transaction. this will make availability check will not consider blocked delivery
    If useful reward points
    Regards
    Ranga

  • Please please help me Can anyone help in Cross Docking Please

    I did cross dock many time succussfully but i am trying now I am either getting following error
    "No inbound documents have been selected for planning"
    Please help me as I set up warehouse relevant, movmenttype relevent set up time reference for release, ref etc too
    But I am getting error please please help me

    Hello,
    Cross docking is process where goods movement do not happen within warehouse house (No putaways & picking)
    The process flow for the same is as follows;
    Sales order creation>>Purchase requistion>>Purchase order>>>Inbound delivery creation(stock is inventory managed)>>Post goods reciept is done>>Outbound delivery creation (reference to sales order)>>stock is picked in delivery itself>>post goods issue.
    Warehouse managment is not involved as there is creation of transfer orders in cross docking. So you need to cerate inbound delivery, do the put away directly in inbound delivery stock placement tab and do the post goods reciept. This will maintain the stock in inventory managed storage location.
    Once PGR is done you can create outbound delivery with refernce to sales order and do the picking in picking tab in delivery and then post goods issue.
    Br,
    Tushar

  • One step cross docking in wm

    hi,
    i am working on one step cross docking scenorio , i am missing some where in configuration. plz guide me.
    steps i followed
    i) checked the preallocated check box in omlj transaction for 101 - movt type
    ii)entered the preallocated stock details in lt51 transaction.
    iii)enter the goods receipt with respect to purchase order in migo.
    iv)create transfer order for inbound delivery with refrence to TR.
    v)create transfer order for outbound delivery without refernce.
    i follow the above steps but still the entry in preallocated stock in lt51 there.where i miss the configuration guide me.
    i already view the help.sap.com,i cant understood where i missing the config.
    appreciate your help always
    muthuraman.d

    Hello,
    For Oppertunistic Cross dock..
    You need to create either Putaway TO/Pick TO and then system checks the cross doc and cancel the TO and create a new TO from 902 to 916. and also updates in the document flow. This  you can do with out Cross dock monitor. With out planning the cross dock you can do the cross docking by following the config in help.sap.com.
    for more information about the complete config you need to see the sap link below. sure it will help you.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
    thanks.
    tkreddy

  • WM: opportunistic cross-docking

    Hi all,
    According to my understanding of the help.sap.com online documentation, we are NOT supposed to use the Cross-docking Monitor while trying to achieve an opportunistic cross-docking stock transfer between an inbound delivery and an outbound delivery. Once we appropriately complete the Customizing, the system is supposed to generates BY ITSELF a cross-docking decision during the process of TO creation (after the arrival of the incoming stock or release of the outgoing document).
    Am I right ? Up to now, I can't achieve it...
    I've checked my Customizing several times against this documentation these last days. According to it, there are two points of view regarding the creation of the opportunistic cross-docking decision:
    - either the system does it by itself (= killing the Outbound delivery TO, modifying the destination of the Inbound delivery TO and updating related documents);
    - or involved Inbound and Outbound deliveries must be manually designated for cross-docking throught the use of the monitor (like it is necessary to create Planned cross-docking decisions).
    So, my questions are:
    1. Do we need to manually designate Inbound and Outbound deliveries candidates for cross-docking using the monitor in order to create an opportunistic cross-docking decision?
    2. If so, how can we automate the creation of the candidate designation?
    Thx in advance for valuable inputs!
    Edited by: al7sap on Oct 22, 2008 5:23 PM

    Hello,
    For Oppertunistic Cross dock..
    You need to create either Putaway TO/Pick TO and then system checks the cross doc and cancel the TO and create a new TO from 902 to 916. and also updates in the document flow. This  you can do with out Cross dock monitor. With out planning the cross dock you can do the cross docking by following the config in help.sap.com.
    for more information about the complete config you need to see the sap link below. sure it will help you.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
    thanks.
    tkreddy

  • Cross dock

    HI
    While executing Cross docking decision in cross dock monitor the error " NO inbound documents have been selected for planning " is displayed. request suggestions
    Thanks and regard
    vivek

    Hi Vivek,
    For cross docking decision you must have an Inbound delivery whose GR has been doen, but not the Putaway. If you don't have such a delivery then it will give you the error mentioned by you.
    please check if you have done this step in your execution.
    Shailesh

Maybe you are looking for