Cross fades not working in flex mode.

Hey there,
i have an audio region in Logic Pro X (latest update) that's using the flex pitch mode. When I want to cross fade it with another region, it just doesn't work. Seems to be a bug or am I wrong?
Greetings,
R. Philipp

Me too. Does the fade tool move your region las if you just had the cursor selected?
Looks like there are quite a few threads on this topic to check out.

Similar Messages

NTFS is not working in 64bit-mode

NTFS is not working in 64bit-mode but in 32bit-mode all right !!! ***?!

dont work int volume with XP and ext volume just sample NTFS file server ! I do not understand ! (((

My iPhone will not work in landscape mode anymore, how do i get to work again

my iPhone will not work in landscape mode anymore, how do i get to work again??

Double click round home button then slide icon on the bottom of screen to so you go all the way to left. There you will see a square icon with a circle arrow . That is the screen rotation control button. Tap on that to lock/unlock screen rotatio

Ipad i have load swf file but swf is not working proper(flex 4.6) but android is fine to work how

ipad i have load swf file but swf is not working proper(flex 4.6) but android is fine to work how

On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed.

Menu.createMenu is not working in flex 4.1.

Hi,
I have created a menu bar with menu item using flex 4. My problem is that the meubar is not clickable on left and right side. How to make it clickableon both sides? For this problem i have found a solution by clicking a button using Menu.createMenu but it is not working in flex 4.1. can anyione help me with this?
Thanks,
Karthick K.

find my code below,
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx">
    <fx:Script>
        <![CDATA[
            import mx.controls.Menu;
            import mx.events.FlexEvent;
            import mx.events.MenuEvent;
            protected var menu1:Menu;
            protected function showMenu():void
               menu1 = Menu.createMenu(null, menuItem, false);
                menu1.labelField="@label";
                menu1.iconField="@icon";
                menu1.show(0, 35);
        ]]>
    </fx:Script>
    <fx:Declarations>
        <fx:XML format="e4x" id="menuItem">
            <root>
                <menuitem label="MenuItem A">
                    <menuitem label="File" icon="topIcon">
                        <menuitem label="New"/>
                        <menuitem label="Open"/>
                        <menuitem label="Save" icon="top2Icon"/>
                        <menuitem label="Save as..."/>
                        <menuitem label="Close"/>
                        <menuitem label="Print"/>
                        <menuitem type="separator"/>
                        <menuitem label="Quit"/>
                    </menuitem>
                    <menuitem label="Edit">
                        <menuitem label="Undo"/>
                        <menuitem label="Redo"/>
                        <menuitem type="separator"/>
                        <menuitem label="Cut"/>
                        <menuitem label="Copy"/>
                        <menuitem label="Paste"/>
                    </menuitem>
                    <menuitem label="View"/>
                    <menuitem label="Document" icon="top1Icon"/>
                    <menuitem label="Tools">
                        <menuitem label="BasicToolsSubToolBar">
                            <menuitem label="SelectMenuItem"/>
                            <menuitem label="HandMenuItem"/>
                            <menuitem label="ZoominMenuItem"/>
                            <menuitem label="ZoomDragMenuItem"/>
                        </menuitem>
                        <menuitem label="AnalysisToolsItem"/>
                    </menuitem>
                    <menuitem label="Window"/>
                    <menuitem label="Help"/>
                </menuitem>
                <menuitem label="MenuItem B"/>
                <menuitem label="MenuItem C"/>
                <menuitem label="MenuItem D"/>
            </root>
        </fx:XML>
    </fx:Declarations>
    <s:Panel title="Menu Control Example" width="553" height="238">
        <s:Button x="10" y="174" label="Show Menu" click="showMenu()"/>
    </s:Panel>
</s:Application>
The above code is not working in Flash builder 4 sdk used is 4.1 especially the code snippet in red.
Thanks,
Karthick K..

Input Textfields not working in fullscreen mode

Input Textfields not working in fullscreen mode any one help me.

Quotes from Adobe:
"Users cannot enter text in text input fields while in full-screen mode. All keyboard input and key-related ActionScript is disabled while in full-screen mode, with the exception of the keyboard shortcuts that take the viewer out of full-screen mode."
Check with this article to know more: http://www.adobe.com/devnet/flashplayer/articles/full_screen_mode.html

Flash.sampler.getSamples() not working in flex app

flash.sampler.getSamples() is returning undefined when called in flex application.
I tried it by deploying this application to a local tomcat and called the flash.sampler.getSamples() which returned undefined.
The same code works fine when run in a standalone mode. Can someone please help me why it is not working when deployed in a server.

This is the sample code which I have written in my application's button click handler
flash.sampler.startSampling();
for(var i:int=0;i<1000;i++)
new Object()
trace(getSampleCount() > 0);
Alert.show(" "+getSampleCount());
When I run this locally, the alert always shows some number greater than 1000. When I run this from my tomcat server, the alert always shows zero.

Cross fade not responsive

Hi, I can't seem to get my tunes to play without a 5 to 7 sec. space between them. Cross fade is not responding no matter where I set it. Any ideas? Thanks! k

I'm trying to crossfade on my laptop, it seems that if it works on one track it will work on the whole album and likewise if one track doesn't work that goes for the whole album - there seems to be no connection between albums that don't work - any bright ideas out there?

Yoga 2 Pro - Keyboard lock not working in stand mode

Where can I find the Yoga Utilities suite (Yoga Transitions, Chef, etc.). I just isntalled fresh 8.1 Enterprise and turns out the D:\ partition didn't have the Yoga Utilities available, same on the support site (checked Yoga 13 as well). Pretty dumb, but I can't use the stand since the keyboard doesn't lock

Hi i have this problem did you find a solution other than lenovo transition because i downloaded that and it still doesnt work....
can you please help me if you have any ideas.
my keyboard does not lock or disable in stand mode and sometimes it stops working in laptop mode...
any help would be greaatly appreciated

Wireless works FINE in Safe Mode, WILL NOT work in Normal Mode

Hi All:
I've been smashing my head against the wall with this one. I have uninstalled ALL unnecessary applications I could find. Basically all that is left is Windows XP, Drivers and Patches in Add/Remove Programs. I have removed the wireless driver, downloaded a newer one and installed it, still nothing. I have tried it using no Wireless Security on the AP, and also using WPA, and wouldn't work with either in Normal Mode, but worked with both in Safe Mode. I ran a virus and spyware check (before uninstalling Norton), and it came out clean.
The weirest thing is, sometimes it does connect and get an IP in Normal Mode, but when I run a ping to my local gateway, half the packets are lost (timeout), and the ones that do reply I see a response time ranging from 2ms to 5000ms with no other traffic. I have no idea what can be causing this. Any help would be greatly appreciated.
If all else fails, I will resort to formatting it and installing WinXP from scratch, since I doubt it's hardware.

It appears that some device whose driver does not load in Safe Mode malfunctions.
If this occurs before loading any drivers for added devices, then you'll need service.
Locate a Service Center
-Jerry

Ctrl+tab is not working in editing mode

I have JcheckBox and JTable in my JPanel. When user clicks or presses F2 to edit any cell value of the JTable a comboBox will appear with possible values. (This comboBox is coming from table CellEditor). When user presses ctrl+tab from the table focus should transfer to JComboBox all time. It is working only when the user presses ctrl+tab from the table cell which is not in editing mode. If the user presses ctrl+tab from the table cell which is in editing mode (i.e. focus is on the ComboBox of the cellEditor) it does not work. Please help me to find the solution.
I give a sample code here for your reference.
public class Frame1 extends JFrame {
public Frame1()
super();
this.setLayout( null );
this.setSize( new Dimension(400, 300) );
JTextField ch = new JTextField();
ch.setVisible(true);
ch.setBounds(10, 10, 10, 10);
this.add(ch, null);
DefaultTableModel tmodel = new DefaultTableModel(3, 1);
tmodel.setValueAt("0 0 1",0,0);
tmodel.setValueAt("1 0 1",1,0);
tmodel.setValueAt("2 0 1",2,0);
JTable custLayersTable = new JTable(tmodel);
custLayersTable.getColumnModel().getColumn(0).
setCellEditor(new ComboEditor());
custLayersTable.setBounds(new Rectangle(40, 40, 280, 145));
custLayersTable.setSurrendersFocusOnKeystroke(true);
this.add(custLayersTable, null);
public static void main(String[] args)
Frame1 a = new Frame1();
a.setVisible(true);
final class ComboEditor extends AbstractCellEditor
implements TableCellEditor
public Component getTableCellEditorComponent(JTable table,
Object value,
boolean isSelected,
int row,
int column)
Vector<String> layerValSet = new Vector<String>();
for(int i=0; i<3; i++)
layerValSet.add(row+" "+column+" "+i);
mComboModel = new DefaultComboBoxModel(layerValSet);
mComboModel.setSelectedItem(value);
mEditorComp = new JComboBox(mComboModel);
return mEditorComp;
public Object getCellEditorValue()
return mEditorComp.getSelectedItem();
private DefaultComboBoxModel mComboModel;
private JComboBox mEditorComp;
}

Thanks a lot for your reply.
Since the textField is in a different class i could not use the transferFocus API directly. I tried the following code in the keyreleased event of Combo Box but it was not working.
KeyboardFocusManager.getCurrentKeyboardFocusManager().focusNextComponent(
e.getComponent().getParent());
I also tried the following code in stopCellEditing and is not working.
KeyboardFocusManager.getCurrentKeyboardFocusManager().focusNextComponent();
Is there any other way to achieve this?

BDC is not working in background mode and working fine in Foreground mode

Hi Experts,
I have created a BDC in SHDB for the transaction code:CWBQM for creating and deleting the record and converted the BDC recording into the program using call transaction. It is working fine in both foreground and background. When I given the same program for users testing one for the user was able to delete the records but Creation is not working in the same BDC. He is able to create the same records in another PC and the problem is only in that PC and only during the creation of the record. When I change the mode to 'A' mode for testing and request the user to execute and it is working fine the records created successfully. What could be the issue ?
Thanks,
Hema

Hello,
While recording BDC in SHDB try setting "Simulate background mode" flag and give a try.
Cheers,
Nag

Tabbing is not working properly / Flex Mobile 4.6

Hello,
I've been working on a mobile app in Flex 4.6 and I've noticed that tabbing between fields is not working properly - maybe someone else has had the same experience and has a fix?
I have 4 TextInput fields, which now all have tabEnabled set to "true" and tabIndex set accordingly, however, I am unable to tab netween the fields.
More specifically, when I run the app with a destop run configuration, any time I hit the "TAB" button on the keyboard the first field is focused on. So, if the cursor is in field 3 & I hit TAB, the focus is now in field 1.
On the mobile device (Samsung Galaxy S), there is no tabbing at all, no matter which field I am in. The soft keyboard does detect the last field though, and the "Next" button on the keyboard will change to "Done".
I've tried putting the TextInput fields withing a SkinnableContainer (as mentioned here: http://forums.adobe.com/message/2418694#2418694), but no change.
I also found a bug report on something similar, though it was closed becuase it was opened in the AIR bug base instead of the flex bug base. (https://bugbase.adobe.com/index.cfm?event=bug&id=3064944)
Here's the code for my "registration" view without any functions or function calls.
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
                    xmlns:s="library://ns.adobe.com/flex/spark"
                    title="Create Account">
          <fx:Declarations>
                    
          </fx:Declarations>
          <s:Group left="10" right="10" top="10" bottom="10">
                    <s:layout>
                              <s:VerticalLayout/>
                    </s:layout>
                    <s:TextInput id="email" prompt="Email" tabEnabled="true" tabIndex="1"/>
                    <s:TextInput id="un" prompt="Username" tabEnabled="true" tabIndex="2"/>
                    <s:TextInput id="pw" displayAsPassword="true" prompt="Password" tabEnabled="true" tabIndex="3"/>
                    <s:TextInput id="pwc" displayAsPassword="true" prompt="Confirm Password" tabEnabled="true" tabIndex="4"/>
                    <s:Button id="button" width="100%" label="Sign Up"/>
                    <s:Group width="100%">
                              <s:layout>
                                        <s:VerticalLayout horizontalAlign="center"/>
                              </s:layout>
                              <s:BusyIndicator id="bi_reg" visible="false"/>
                              <s:Label id="msg_reg" width="100%" text="Label" textAlign="center" visible="false"/>
                    </s:Group>
          </s:Group>
</s:View>

Thanks for the response. I am using spark TextInput components as you can see in the code above. I've used these conrtols in other apps in FB 4.5 and have had no problems so it seems like something may be different in 4.6, or it's a bug.

Buttons not working in fullscreen mode

Hi everyone,
I have a site where our Flash content can be sent to fullscreen by the user. When in fullscreen mode, in some computers the buttons within the content and the mouse stop working completely. It still exits from fullscreen by clicking the escape buttons.
I have a Win XP computer where it works in Firefox and IE but won't work within Chrome. They both have the latest player installed.
I have a Windows Vista where it does not work in any browser.
On a Linux box (version 10,1,53,64) it works on any browser.
On another Win XP computer with version 10.0.45.2 it works with any browsers.
On some Macs it works, on some it doesn't.
The swf file was produced with Flash CS3.
Any ideas?

For that matter, the "return to menu" which is set to a Main button type, isn't working either. that is one of the three. After i had removed the damaged button and copied it from another it worked. Then i simply edited the text of a different button (mind you one that still works) and the "return to menu" quit along with the bottom 2 buttons. I just can't figure it out. I have shut the app down and restarted and nothing seems to be working

Why export audio to movie command not visible and detect cuts command is not working in 64bit mode?

Does anyone know why export to audio disappear from menu in 64bit mode?
Why detect cuts command is not working well in 64 bit mode?
I tested on several machines (brand-new iMac, brand-new MacPro with 10.8 OS, MacPro with 10.6.8),and everythig wotks in 32 bit mode. As I switch to 64 bit mode detect cuts only put one marker at the begening of film.
I also noticed that Firewire output option in 64bit mode is not avaible.
Is there a certain film format that I have to use to make it work? I tried DV PAL, but I had ther same result.
Thanks a lot.

Hi
Those functions are not available when Logic is running in 64bit mode
http://support.apple.com/kb/TS3171
CCT

Cross fades not working in flex mode.

Similar Messages

Maybe you are looking for