Cross Instance Authentication Issues

I have the portal meta-data installed and running on an instance called DMD1 and all of our users are on a different instance called DCD1. Prior to this setup our metadata and client data was on the same instance and I would run a PSP with the ...pls/portal/schema.package.procedure.
With this setup (meta-data in one instance and client data in another) I get ie-404 errors. Can anyone direct me to a resource that would explain the configuration changes that I would have to make in order to allow PSP's on DCD1 to be available through the portal on DMD1?
I have created a DAD on the DMD1 instance with a specific USERNAME and PWD and can use that DAD to execute a PSP on DCD1 but I need each user to run the PSP as themselves.
Any assistance or resources that will provide an explanation of SSO in this type of environment will be appreciated.
Thank you,
Mark Johnson

I have found my answer, thanks to another forum.
Meta-Cross Domain Policies.
http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_03.html
Basically I can now say "f*ck you adobe. I as a college
student who likes to host things on my 150 MB of server space can
no longer host XML formatted levels for games I write. Because I am
not the administrator of the server and will never be able to
convince the administrator to let me have the MCDP file allow my
flash file to load it's levels."
F*ck you Adobe, F*ck You.

Similar Messages

  • Authentication Issue, When Profile ReCreate

    Hi,
    i face authentication issue in SQL Server 2012 Evalution after i login in new account.
    Take a look situation and what i did.
    1) I install SQL Server 2012 in Member Server (Server 2012 Standard).
    2). Every Thing i Did i by using AD User name "SP_Farm"
    3). I install SQL in Windows Authentication Mode only and i provide User ****\SP_Farm, when Ever Installation Ask.
    Note: during the whole process i only use SP_Farm (AD Admin User)
    Every thing going working fine till my mistake. By mistake i delete account SP_Farm from AD and i re create it.
    after that i cant access Management Studio. :(
    Please Guide if is there any other way.
    Thanks you 
    Shariq Ayaz
    [email protected]
    www.shariqdon.com
    www.shariqdon.com/itworld
    www.shariqdon.com

    Hi,
    i face authentication issue in SQL Server 2012 Evalution after i login in new account.
    Take a look situation and what i did.
    1) I install SQL Server 2012 in Member Server (Server 2012 Standard).
    2). Every Thing i Did i by using AD User name "SP_Farm"
    3). I install SQL in Windows Authentication Mode only and i provide User ****\SP_Farm, when Ever Installation Ask.
    Note: during the whole process i only use SP_Farm (AD Admin User)
    Every thing going working fine till my mistake. By mistake i delete account SP_Farm from AD and i re create it.
    Creating a user with the same name is
    not the same user :-)
    A user has a unique ID and you did not create the same ID, but a new user with same name.
    after that i cant access Management Studio. :(
    Please Guide if is there any other way.
    Thanks you 
    Shariq Ayaz
    [email protected]
    www.shariqdon.com
    www.shariqdon.com/itworld
    www.shariqdon.com
    You can try to use This solution:
    http://blogs.msdn.com/b/raulga/archive/2007/07/12/disaster-recovery-what-to-do-when-the-sa-account-password-is-lost-in-sql-server-2005.aspx
    * After the SQL Server Instance starts in single-user mode, the Windows Administrator account is able to connect to SQL Server using the sqlcmd utility using Windows authentication.
    [Personal Site] [Blog] [Facebook]

  • Cross Domain authentication between Windows 2012 R2 domains

    Hello,
    I am trying to figure out if this is possible.
    We have 2 companies that have a VPN between them.
    I can ping their PCs and access their servers by name no issues.
    What I am trying to do is setup a cross domain authentication.
    So their credentials can be authenticated without creating an account for them on a local network. (and vise versa)
    This way on our domain I can create share and they will be able to access it without needing to logon without different credentials.
    Thank you.

    We have Meraki with Site to Site VPN.
    Site-to-site firewall
    Policy
    Protocol
    Source
    Src port
    Destination
    Dst port
    Comment
    Actions
    <tfoot>
    Allow
    Any
    Any
    Any
    Any
    Any
    Default rule
    </tfoot>
    Add a rule
    So as you can tell we don't block anything at all.

  • DOM Based Cross-Site Scripting issue in RoboHelp 10

    We're using a WebHelp system originally deplyed using RoboHelp 9.0.2.271, and a recent security scan revealed the DOM based cross-site scripting issue.
    I recently upgraded to RoboHelp 10, migrated my help system to this version, and redeployed the system, but our security scan is still detecting the cross-scripting vulnerability in WebHelp. Wasn't this issue resolved in RoboHelp 10?
    Thanks

    Hi,
    I’m not a security expert, but this script reads the URL of the current topic and redirects to the current topic with a bookmark. This is needed for when the same topic is used in multiple locations in the TOC.
    I’ll ask around about this security issue.
    Greet,
    Willam

  • Authentication issue getting "UMELoginException"

    Dear Guys,
    I am facing an authentication issue. The situation is like this,
    My NT password was about to expire (had 6 more days for expiry). I was able to login till yesterday and all of the sudden today, when I was trying to login, I was not able to (it gave me password change message). So I went back and changed my NT password and tried to login again into the portal, however I am still not able to. I am pasting the stack trace,
    #1.5#001143FDCEA7006700000008000018C40004196E4AD849E8#1153861399615#com.sap.security.core.imp#sap.com/irj#com.sap.security.core.imp.[cf=com.sap.security.core.sapmimp.logon.SAPMLogonLogic][md=doLogon][cl=20282]#Guest#192####fff21cf01c2011dba425001143fdcea7#SAPEngine_Application_Thread[impl:3]_0##0#0#Error##Java###doLogon failed
    [EXCEPTION]
    #1#com.sap.security.core.logon.imp.UMELoginException
         at com.sap.security.core.logon.imp.SAPJ2EEAuthenticator.logon(SAPJ2EEAuthenticator.java:318)
         at com.sapportals.portal.prt.service.authenticationservice.AuthenticationService.login(AuthenticationService.java:344)
         at com.sapportals.portal.prt.connection.UMHandler.handleUM(UMHandler.java:126)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:186)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:312)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:368)
         at com.sap.portal.navigation.Gateway.service(Gateway.java:101)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Please help.
    Regards,
    Deepak

    Hi Deepak,
    it is most times that it needs to replicate through your system(s).
    Regards,
    Kai
    PS: Please reward points if that was helpful.

  • Essbase 6.5 External Authentication Issue!! Urgent Please!!

    Hi all,
    I am great trouble over an external authentication issue in Essbase 6.5. I request you all to please give me your feedback on the same as soon as possible.
    I am in a situation where I need to get my Essbase 6.5 external Authentication converted from LDAP to Active Directory services.
    I suppose there has been necessary changes done to the .cfg file for the same. However, I think I am getting an error
    "User [vikc]'c external authentication protocol [MSEX]'s password check module is not loaded".
    Please let me know if you have come across such an issue earlier and can anybody to able to help me with the same.
    Its kinda Urgent. so any replies for the same will be appreciated.
    Thanks and Regards,
    Vikram

    Vikram,
    Yes you will have to reconfigure the CSS.xml and cfg file for external auth.
    Here is the Sample CSS
    <spi>
              <provider>
                   <msad name="full360">
                        <trusted>false</trusted>
                        <url>ldap://192.168.1.100:389/DC=full360,DC=com</url>
                        <userDN>CN=Ravinder Singh,DC=full360,DC=com</userDN>
                        <password>full@360</password>
                        <authType>simple</authType>
                        <identityAttribute>dn</identityAttribute>
                        <maxSize>1000</maxSize>
                        <user>
                             <loginAttribute>sAMAccountName</loginAttribute>
                             <nameAttribute>dn</nameAttribute>
                        </user>
                        <group>
                             <nameAttribute>cn</nameAttribute>
                             <objectclass>
                                  <entry>group?member</entry>
                             </objectclass>
                        </group>
                   </msad>
    Download this toll "http://www.ldapbrowser.com/download.htm"
    LDAP browser to get the perfact DN information.
    Let me know the status
    Ravikant

  • Oracle11g RAC with partitioning and cross instance parallel query problem

    I have set up a 300gb TPC-H database using a 4 node RAC environment (8 cpu per node, 16 GB memory, 2 GHz processors) the system is served by 2.5 terabytes of SSD for its IO subsystem managed by a combination of ASM and OCFS2.
    When I run a large parallel query (number 9 in the TPCH query set) I get:
    ORA-00600: internal error code, arguments [kxfrGraDistNum3],[65535],[4]
    with all other arguments blank. There were some reports of this in version 9, but it was supposedly fixed. Has any one seen this behavior or have a work around?
    Mike

    Good Idea! Why didn't I think of that? Oh yea...I did. Unfortunately TMS CSI is an update only partner type CSI so I cannot submit a SR. The 600 lookup was how I found the old stuff, but it didn't have any 11g references. I hoped maybe someone in the community had encountered this and had a workaround. By the way, the querey looks like so:
    select
    nation,
    o_year,
    sum(amount) as sum_profit
    from
    select
    n_name as nation,
    extract(year from o_orderdate) as o_year,
    l_extendedprice * (1 - l_discount) - ps_supplycost * l_quantity as amount
    from
    h_part,
    h_supplier,
    h_lineitem,
    h_partsupp,
    h_order,
    h_nation
    where
    s_suppkey = l_suppkey
    and ps_suppkey = l_suppkey
    and ps_partkey = l_partkey
    and p_partkey = l_partkey
    and o_orderkey = l_orderkey
    and s_nationkey = n_nationkey
    and p_name like '%spring%'
    ) as profit
    group by
    nation,
    o_year
    order by
    nation,
    o_year desc;
    the other 21 queries, all using the same tables and degrees of paralell and cross instance settings, executed ok.
    Mike

  • ACS 5.2 Authentication Issue with Local & Global ADs

    Hi I am facing authentication issue with ACS 5.2. Below is AAA flow (EAP-TLS),
    - Wireless Users >> Cisco WLC >> ADs <-- everything OK
    - Wireless Users >> Cisco WLC >> ACS 5.2 >> ADs <-- problem
    Last time I tested with ACS, it worked but didn't do migration as there'll be changes from ADs.
    Now my customer wants ACS migration by creating new Group in AD, I also update ACS config.
    For the user from the old group, authentication is ok.
    For the user from the new group, authentication fails. With subject not found error, showing the user is from the old group.
    Seems like ACS is querying from old records (own cache or database). Already restared the ACS but still the same error.
    Can anyone advice to troubleshoot the issue?
    Note: My customer can only access their local ADs (trusted by Global ADs). Local ADs & ACS are in the same network, ACS should go to local AD first.
    How can we check or make sure it?
    Thanks ahead,
    Ye

    Hello,
    There is an enhacement request open already:
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCte92062
    ACS should be able to query only desired DCs
    Symptom:
    Currently on 5.0 and 5.1, the ACS queries the  DNS with the domain, in order to get a list of all the DCs in the domain  and then tries to communicate with all of them.If the connection to even one DC fails, then the ACS connection to the domain is declared as failed.A lot of customers are asking for a change on this behavior.
    It  should be possible to define which DCs to contact and/or make ACS to  interpret  DNS Resource Records Registered by the Active Directory  Domain Controller to facilitate the location of domain controllers.  Active Directory uses service locator, or SRV, records. An SRV record is  a new type of DNS record described in RFC 2782, and is used to identify  services located on a Transmission Control Protocol/Internet Protocol  (TCP/IP) network.
    Conditions:
    Domain with multiple DCs were some are not accessible from the ACS due to security/geographic constraints.
    Workaround:
    Make sure ALL DCs are UP and reachable from the ACS.
    At the moment, we cannot determine which Domain Controller on the AD the ACS will contact. The enhacement request will include a feature on which we can specify the appropriate the Domain Controllers the ACS should contact on a AD Domain.
    Hope this clarifies it.
    Regards.

  • Wireless Client Authentication issues when roaming Access Points (Local)

    I have a Cisco 5508 with Software version 7.4.121.0 and Field Recovery 7.6.101.1.
    There are a handful of clients that when roaming between AP's with the same SSID that get an authentication issue and have to restart the wireless to get back on.
    From Cisco ISE
    Event
    5400 Authentication failed
    Failure Reason
    11514 Unexpectedly received empty TLS message; treating as a rejection by the client
    Resolution
    Ensure that the client's supplicant does not have any known compatibility issues and that it is properly configured. Also ensure that the ISE server certificate is trusted by the client, by configuring the supplicant with the CA certificate that signed the ISE server certificate. It is strongly recommended to not disable the server certificate validation on the client!
    Root cause
    While trying to negotiate a TLS handshake with the client, ISE expected to receive a non-empty TLS message or TLS alert message, but instead received an empty TLS message. This could be due to an inconformity in the implementation of the protocol between ISE and the supplicant. For example, it is a known issue that the XP supplicant sends an empty TLS message instead of a non-empty TLS alert message. It might also involve the supplicant not trusting the ISE server certificate for some reason. ISE treated the unexpected message as a sign that the client rejected the tunnel establishment.
    I am having a hard time figuring out what is causing this. My assumption is if there were a problem with the Controller or AP configurations then it would happen to everyone. My further assumption is if the client had a problem with their laptop (windows 7) then why does work at other times? So I have checked and the ISE certificate is trusted by client.
    Is something happening that the previous access point is holding on to the mac and the return authentication traffic is going to the old AP instead of the new one or something like that which is corrupting the data?
    I also had this from Splunk for the same client:
    Mar 5 13:44:51 usstlz-piseps01 CISE_Failed_Attempts 0014809622 1 0 2015-03-05 13:44:51.952 +00:00 0865003824 5435 NOTICE RADIUS: NAS conducted several failed authentications of the same scenario
     FailureReason="12929 NAS sends RADIUS accounting update messages too frequently"
    Any help on this would be appreciated. These error messages give me an idea but doesn't give me the exact answer to why the problem occurred and what needs to be done to fix it.
    Thanks

    Further detail From ISE for the failure:
    11001
    Received RADIUS Access-Request
    11017
    RADIUS created a new session
    15049
    Evaluating Policy Group
    15008
    Evaluating Service Selection Policy
    15048
    Queried PIP
    15048
    Queried PIP
    15004
    Matched rule
    15048
    Queried PIP
    15048
    Queried PIP
    15004
    Matched rule
    11507
    Extracted EAP-Response/Identity
    12500
    Prepared EAP-Request proposing EAP-TLS with challenge
    11006
    Returned RADIUS Access-Challenge
    11001
    Received RADIUS Access-Request
    11018
    RADIUS is re-using an existing session
    12301
    Extracted EAP-Response/NAK requesting to use PEAP instead
    12300
    Prepared EAP-Request proposing PEAP with challenge
    11006
    Returned RADIUS Access-Challenge
    11001
    Received RADIUS Access-Request
    11018
    RADIUS is re-using an existing session
    12302
    Extracted EAP-Response containing PEAP challenge-response and accepting PEAP as negotiated
    12318
    Successfully negotiated PEAP version 0
    12800
    Extracted first TLS record; TLS handshake started
    12805
    Extracted TLS ClientHello message
    12806
    Prepared TLS ServerHello message
    12807
    Prepared TLS Certificate message
    12810
    Prepared TLS ServerDone message
    12305
    Prepared EAP-Request with another PEAP challenge
    11006
    Returned RADIUS Access-Challenge
    11001
    Received RADIUS Access-Request
    11018
    RADIUS is re-using an existing session
    12304
    Extracted EAP-Response containing PEAP challenge-response
    12305
    Prepared EAP-Request with another PEAP challenge
    11006
    Returned RADIUS Access-Challenge
    11001
    Received RADIUS Access-Request
    11018
    RADIUS is re-using an existing session
    12304
    Extracted EAP-Response containing PEAP challenge-response
    12305
    Prepared EAP-Request with another PEAP challenge
    11006
    Returned RADIUS Access-Challenge
    11001
    Received RADIUS Access-Request
    11018
    RADIUS is re-using an existing session
    12304
    Extracted EAP-Response containing PEAP challenge-response
    12305
    Prepared EAP-Request with another PEAP challenge
    11006
    Returned RADIUS Access-Challenge
    11001
    Received RADIUS Access-Request
    11018
    RADIUS is re-using an existing session
    12304
    Extracted EAP-Response containing PEAP challenge-response
    12305
    Prepared EAP-Request with another PEAP challenge
    11006
    Returned RADIUS Access-Challenge
    11001
    Received RADIUS Access-Request
    11018
    RADIUS is re-using an existing session
    12304
    Extracted EAP-Response containing PEAP challenge-response
    12305
    Prepared EAP-Request with another PEAP challenge
    11006
    Returned RADIUS Access-Challenge
    11001
    Received RADIUS Access-Request
    11018
    RADIUS is re-using an existing session
    12304
    Extracted EAP-Response containing PEAP challenge-response
    12305
    Prepared EAP-Request with another PEAP challenge
    11006
    Returned RADIUS Access-Challenge
    11001
    Received RADIUS Access-Request
    11018
    RADIUS is re-using an existing session
    12304
    Extracted EAP-Response containing PEAP challenge-response
    11514
    Unexpectedly received empty TLS message; treating as a rejection by the client
    12512
    Treat the unexpected TLS acknowledge message as a rejection from the client
    11504
    Prepared EAP-Failure
    11003
    Returned RADIUS Access-Reject

  • Strange Session/Entity Bean Cross-Instance Calls in Cluster

    In one of our enviroments, we are seeing session entity bean cross-instance
              calls that are hard to explain. The following is our configuration:
              The cluster contains 4 instances on 2 machines (2 on each machine). The same
              beans are deployed to each instance. "jndi.properties" is on the classpath
              for the each instance with jndi provider url = mach1inst1-ip, mach1inst2-ip,
              mach2inst1-ip, mach2inst2-ip:70001. Same servlets are also deployed to each
              instances.
              Requests from the web are load balanced through weblogic's proxy plugin for
              IPlanet and are forwarded to the 4 weblogic cluster instances. The servlet
              processing the requests calls a stateless session bean which uses an entity
              bean. The entity bean is configured with "home-is-clusterable" set to
              "false".
              What we have observed is that when all 4 instances are up, sometimes (even
              when the load is not high) the session bean is accessing entity bean from an
              instance on one machine to an instnace on another machine, while if only one
              machine (with 2 instances) is up, we don't see such calls.
              My theory is that because the jndi provider url is the same for all
              instances, the jndi lookup from each instance goes to the instance bound to
              the first IP specified in the provider url: machine 1 istance 1. If the
              request is from machine 2, because of co-location optimization, even though
              the home stub is from machine 1 instance 1, the session bean returned from
              the home stub actually is from machine 2. However, when the session bean
              does jndi lookup to get an entity bean home, the home stub is from machine 1
              and instance 1. And unfortunately, because the entity bean home is not
              clusterable, the stub can only point back to machine 1, co-location can not
              work. Thus entity bean from machine 1 is referenced by the session bean
              located on machine 2. I do not have a chance to verify this. But it seems to
              make sense to me.
              Unfortunately, I don't feel that I have a theory to explain why we don't see
              cross instance session entity bean calls when only 1 machine is up (with 2
              instances).
              Any ideas or hints would be greatly appreciated.
              Thanks,
              David Chen
              

    rs = stmt.executeQuery() , insert statement is not a query. So use executeUpdate.

  • Old Macromedia - Adobe cross platform font issues

    This message is more directed to Adobe.
    I am aware that currently OpenType fonts are cross platform compatible but only with Illustrator, Photoshop and InDesign.
    However, my primary workspace is Fireworks-Flash. There are serious cross platform issues with fonts - I have looked at truetype, postscript and opentype and they all have issues translating onto PC - many of the styles are not available.
    In our studio I design on Mac but our Flash developers are on PC - our final renders and review renders always need to happen on Mac as a result of this cross platform issue. This is a little inefficient.
    When is Adobe planning on resolving this issue?

    "I am aware that currently OpenType fonts are cross platform
    compatible but only with Illustrator, Photoshop and InDesign."
    No, they are fully cross-platform compatible. The Adobe products you
    mention, along with a very few others, are the only applications
    capable of taking full advantage of the advanced features available in
    some opentype fonts. And even the three products you mention don't all
    necessarily support open-type in the same way.
    "However, my primary workspace is Fireworks-Flash. There are serious
    cross platform issues with fonts - I have looked at truetype,
    postscript and opentype and they all have issues translating onto PC -
    many of the styles are not available."
    If you are using the same application version on both platforms, you
    should have identical functionality. If you're using an older version
    of Fireworks.
    The only cross-platform style issue with TT or T1 fonts is that
    Windows doesn't recognize any styles other than Regular, Bold, Italic,
    and Bold Italic. Also, there's a font menu difference between MacOS
    and Windows. Mac display all available styles, whereas Windows only
    displays the family name, and you have to select the variants from
    somewhere else (typically "B" "I" "U" buttons). SOME font families
    from some vendors use the style function to define such variants as
    Small Caps, Light, etc. MS products get ... confused.
    "In our studio I design on Mac but our Flash developers are on PC -
    our final renders and review renders always need to happen on Mac as a
    result of this cross platform issue. This is a little inefficient."
    If you're using different applications for design and rendering, and
    their functionality is different, then you have a cross-application
    compatibility issue. You didn't mention what applications or versions
    are involved.
    "When is Adobe planning on resolving this issue?"
    It may be more a Microsoft issue than an Adobe issue. In addition to
    the style limitations, There are no MS products that yet support
    open-type features.
    Although Adobe personnel do sometimes visit here, this is not a
    "talk-to-Adobe' forum. Since your problem is application related, I'd
    suggest taking it to the appropriate application forumsFireworks
    General Discussion looks right.
    And, as Bob said, you might also contact Adobe support directly with
    your concerns.

  • Authentication issues

    We've had authentication issues with Infinity since the install just over a week ago (BT Business package)
    The router will drop the connection and then we have a problem reconnecting (won't). Out of sheer frustration I've discovered a workaround that sometimes works that is to change the user name to the BT test account, connect, and then change the router user name setting back to our own. The BT test account always works, so despite a BT engineer being sent to trace the problem onsite yesterday the issue remains. We've also been sent a new router, and the BT engineer arrived with yet another new one yesterday
    The problem seems to be purely authentication. The Technical Helpdesk have changed our password (twice) but we still get the problem. Yesterday I was told that some other users in our area have also had an authentication issue and that over the weekend 'patches' were going to be applied at our local exchange.
    When the service works we get quite good speeds (37 down, 8 up) but we're frustrated with the lack of knowledge from the help-desk and have doubts that the 'patches' will resolve the issue
    Such is the problem that BT will downgrade us back to ADSL2 (which was rock solid in comparison) next week if we're still unhappy
    I did ask if our user name could be changed but told no. I'm curious to know as to what the switch to fibre could cause authentication problems?

    hi this is a BT Residential forum as a Business user you may get more help from the BT business forum
    http://business.forums.bt.com/t5/Broadband-and-internet/bd-p/Broadband
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • LiveCycle ES2, Guides, SSL and IE 8/9 Cross Site Scripting Issue

    I have a guide that is being served up in the workspace.
    This guide works fine in all of the different browser versions provided they go through port 8080.
    If however you enable SSL on your server (port 8443) and serve up the guide in the workspace, the end user can fill the entire form out only to have the browser identify the submit process as a Cross Site Scripting issue.
    This is the result:
    The data is essentially lost and guide disappears.  I had a theory that maybe the submit process might be using the default server port for data submissions (8080) and created a customized submit process with the hardcoded targetURL.
    I tried to test my theory and got the same result.  I then modified my custom submit process to essentially do nothing (Started and ended the process with an abstract activity), and got the same result.
    The only other thing that I could think of, is that the automatically generated action script classes might be hard coded to use default port instead of the SSL port.
    Suggestions?!

    Hi
    You can rise SR for your issue for 5000+ user or you can also can connect wiht your system engineer team for can possible solution as setup IE and deploy it to 5000+ user pcs
    For your other question see below note:
    Recommended Browsers for Oracle E-Business Suite 11i [ID 285218.1]
    Regard
    Helios

  • Safari 5.1 HTML5 HTTP basic access authentication issue video does not load

    I have a .m4v video referenced in a page with the HTML5 video tag in a folder which is in a password protected folder housed on iPage.
    Safari 5.0.5 plays the video fine.  Safari 5.1 fails to load/play the video in the protected folder.  If I move the video to a not protected folder, Safari 5.1 plays it fine.
    This is on iPage.  Back on MobileMe all is fine with 5.1.
    I think this is a HTTP basic access authentication issue with 5.1.
    Anyone have similar issue? Work around?

    Yes, I can also confirm this behaviour. This is in Safari 5.1.1, but I also see the exact same thing in WebKit nightlies.

  • General authentication issues

    I have a general issue with authenticating usernames and passwords. starting with remote desktop connection to my win 8 laptop 6 days a go i was able to connect to it from the internet with no problems, now for some reason i can't connect to it i can see the window asking for a log in info so it can see the computer but it doesn't accept my log in info, i also have win 2008 server computer on the same LAN and i can connect to it from the outside.
    same thing with my FTP service i can connect to my FTP from the internet using IE but when it asks for username and password it doesn't accept them.
    SAME PROBLEM WITH VPN i used to e able to connect to my LAN from the outside internet and now while it's verifying username and password for VPN it doesn't accept them.
    Iam basically looking at an authentication issue not a connection because i see that i can connect to these services until authentication level then authentication doesn't work.
    Any Ideas?
    Thanks

    Normally I would use FLAC for quality but since Itunes doesn't support it I use mp3. Good albums I do both. Is there a plugin so I don't need 2 copies of my music?
    You can try the Xiph plugins to play your FLAC files. Some people have reported success while others have had problems, but it would be worth trying.
    When I drag the music in to the play list Itunes takes between 5-10 minutes to add the songs and do its gap less playback check, etc.. Itunes is hung the entire time and does not respond. Is this normal?
    How many tracks do you have in your library? If it's really large (many thousands of tracks), the delay may be normal.
    it says it's getting the artwork but it only gets the art work may be 1 out 20 albums I import. Is there a way to select the art work manually?
    If you search the web for "iTunes album art" you'll find a lot of methods for getting album artwork into iTunes.
    Regards.

Maybe you are looking for