Cross investment data

Hello,
We ara trying to make a cross participation between 2 entities without success.
Scenario:
A has the 80% of B
B has the 5% of A.
In the investment data, first we create the participation of A over B as "first consolidation"
Then when we go to create the second investment data of B over A as well as "firs consolidation" the system get us a error.
The error message:
Diagnosis:
An activity First Consolidation with activity number 1000000012 already exists for investee unit A.
System Response
The system terminates processing.
Procedure
Create the activity for a different investee unit or add activity number 1000000012 to the activity.
Somebody can help us??

Hi,
First consolidation is an activity that the system performs the first time an investee is acquired in a consolidation group.
First consolidation of an investee is a prerequisite for processing in further activities of consolidation of investments.
So, Try to use activities "Step Acquisition" for the second investment in the same investee.
Hope it helps.

Similar Messages

Quicken 2007 investment data transfer to Quicken Essentials for Mac

Will my 10 plus years of investment data transfer from Quicken 2007 for Windows to Quicken Essentials for Mac without loss of data?

There is a version of Quicken 2007 for Lion and Mountain Lion available. If you own Quicken 2007 for Mac, it is a US$15 upgrade.
Many Users balked at the loss of capabilities in having to move to Quicken Essentials, and Quicken eventually came around and "ported" Quicken 2007 so that it could run on 10.7 and later. I run it and it mostly works, but for tax estimates, they force you to their online tax estimator or suggest you buy their stand-alone product that will accept tax info from Quicken -- no more ballpark estimates from inside Quicken.
https://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
It appears the conversion from Quicken for PC is incomplete, and requires generation of a QIF file which is then imported:
https://quicken.intuit.com/support/help/pre-sales-questions/convert-data-from-qu icken-for-windows-to-quicken-for-mac/GEN82194.html

Single and Double Underlines When Showing Cross Tab Data

Hi,
I am trying to generate an XML Publisher rtf report in which I need to show the cross tab data which is in number format underlined and totals as double underlined. Is there a way to do that;
I am using XML Publisher 5.6.2 version , Build 45 and I am trying to manage this on Windows XP, Excel 2003 environments.
Thanks and regards.

Can you generate a crosstab that looks like you want to show in the Template Builder for Word?
It should generate a separate line - but 5.6.2 is so long ago, I don't remember what the pivot table
wizard did at this time.
Unfortunatley, we do support for text only single underlines - border can have double lines.
Klaus

ALV - To diferrentiate client specific and cross client data

Hi,
In an ALV grid , i am suppose to show the client specific data and cross client data. I dont know how to differentiate these 2 type of records. Is there any standard icons available to differentiate cross client and client specific data.
Refards,
Jey

> Its fine, is there any other way to differenitate these 2 by some icons.
It is up to you to differentiate them using Icons or may be coloring differently...
Based on the Client you can populate the icon/color information.

COI Investment data reading

if the AFD Investment data has to be read thru 'Totals' tables does it require that all ECC entry for investment need to have the Percentage of investment, Investee fields to be filled in? Can the system read the 'ECC Investment data' with out these fields?
Is there any other way to populate these fields when reaching from ECC to BI/BCS?
Is there any other additional fields to be captured in ECC for Investment entries other than above two fields?

Hi Eugene,
I really need your advice on my AFD things. Hope you can help
Now my Location Values of AFD are as follows:
Read Investment Data From : Additional Financial Data
Read Equity Data From : Additional Financial Data
Read Equity Holdings Adjs From : Additional Financial Data
The user is only performed "Impairment Test" for the goodwill.
So I only select : "Extraordinary Amortization of Goodwill & Extraordinary Amortization of Negative Goodwill" per method.
My question is, for first consolidation, what should I put in AFD manual data entry as first step to record investment, equity & the goodwill? Will the system calculate the goodwill automatically or we need to manually entered journal entry for impairment test?
Providing that the holding company owns 73% of its subsidiary.
Thanks a bunch

Cross-Empire Data Migration - DST?

We are still evaluating NSM 3.0.4 Cross-Empire Data Migration....
It looks like the migration doesn't work with Dynamic Shadow Technology (DST) shadow volumes....
I thought that seeing as the NSM Engine and/or Agent doing the migration has to have the Novell client installed that it would be able to migrate from both the primary and shadow volumes...
However, our initial testing shows that it is ignoring the shadow based data...
Is this an oversight? Use of incorrect/outdated API?
Has anyone else any experience of this? We have rather a larger amount of data in our shadow volumes....!
Cheers
David

djbrightman,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Cross-Empire Data Migration - Mirror?

Evaluating the edir-AD Cross-Empire Data Migration process...
Is there a copy option that allows the mirroring of source data to the target?
i.e. the removal of files in the target that no longer exist in the source
We are looking for a staged migration i.e. allow early migration jobs to copy the bulk of the data in the days/weeks preceding the actual migration, with final migration set to mirror/sync the source and target
Hope this makes sense
Thanks
David

djbrightman,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Investment data

In the COI if the investment data has to be read from 'Totals cube'..( that is if the investment data has to be read , what ever is entered in ECC)..then does the ECC entries has to contain the field 'Activity' to inform the BCS whether it is 'First consolidaiton' or increase/decrease in capilization etc.
My doubts is since the AFD entries clearly inform the BCS COI functions , if the data relates to what kind of activity is this..should the ECC entries also indicates the same. ( this is incase if the COI Investment data will be read only from 'Totals cube'}
Please let me know your experience.

Certainly, the data basis, in the investment datastream contains 'Activity' field. However, AFAIK, the system may determine the activity indirectly. -- Remember that Location of values/Investments tab? There every CoI activity might be distinguished by the item and MoveType. So, encountering the configured here item/MT in the incoming data, the system should recognized the type of activity.

Cannot Reconcile : Crossed Return Date, please Reverse: Message No : 81582

Dear Friends,
One of our client is getting an error as :"Cannot Reconcile : Crossed Return Date, please Reverse"
Message No : 81582 while reconciliing Sub Contract Challan through J1IFQ . Here the days limit of challan crossed 180 days. Client wants to close this challan after reconcile.
Kindly tell me the idea how to close these challans whose days limit crossed 180 days.
Regards,
ASK

Hello All,
Can anybody give answer to this post as we are also facing similar problem for one of our client ?

J2I8 " Cannot reconcile : Crossed Return Date, please reverse".

Hello Experts,
While doing an Capital Goods transfer through J2I8 system is throwing the " Cannot reconcile : Crossed Return Date, please reverse".
After analysis, I have observed that, at the time of double clicking on the Part 2 Serial Number, system is not displaying the respecting Accounting like as below
its giving an blank document number while double clicking on the part 2 of serial number, but no accounting document was there in place & its giving an error message while doing the transfer " Cannot reconcile : Crossed Return Date, please reverse".
I have attached document of the error message since server was not allowed to paste the error screens.
Regards
Raj

Have a look at the following notes:-
Note 575481 - Error Message 8I(582) in J2I8 when CENVAT amount is odd
Note 629832 - Wrong CENVAT value gets proposed during transfer credit-J2I8
G. Lakshmipathi

Make content item's status to expire after crossing expiry date in WLP repo

Can anybody please tell me, how make the status of content to expired after crossing its expiry date(content attribute) programmatically.
Thanks a ton in advance.

Are you using Library Services and the WLP Repository? If so, are you looking to automatically move content Nodes to the Retired status when the expiry date is reached? If the answers to both of these are yes, then you'll need to write some type of job that runs on some frequency and queries for Nodes where the expiration/retired date is reached. Of course, you'll need to have a Property on each content Type that holds the scheduled retirement date. Your job would then need to query where the retirement date has been reached and do a checkout, change status to retired, and then check the Node back in. Note that the retirement would only occur as often as your job ran, so if the retirement is time senstivie (ie. to the minute or second), then you'll also need to filter your content searches that are used in your application to filter out items that have reached the expiration date (ex. Type.ExpirationProperty > now).
If you're not using Library Services, then you would just include the expiration date test (Type.ExpirationProperty > now) in each query/display to ensure that you are not displaying content that has reached maturity.
Brad

Cross Domain Data Source Error in SSRS 2008

We have our data warehouse server on a different Windows domain (Domain ABC) to the domain where our end user tools such as SSRS and SSAS sit (DOMAIN 123). Historically we've used SQL server mixed mode authentication to get around any cross domain
authentication issues but to tighten up security we are trying to switch to Windows only. However, I'm unable to my development instance of SSRS to connect to a datasource using credentials from a different domain.
I created a copy of the live data source with the same settings except for the credentials. Here I selected Windows credentials (without impersonation ticked) and put in the username with the format DOMAINABC\DomainAccount with a domain account from
the same domain as our DWH server. However, none of the reports I tested can conect and throw the error below. Please can anyone give me some pointers on things to check? My google research has drawn a blank so far!
An error occurred during client rendering.
An error has occurred during report processing.
Cannot impersonate user for data source 'DWH'.
Log on failed.
Logon failure: unknown user name or bad password. (Exception from HRESULT: 0x8007052E)

From your inital post, it sounded like you wanted to login to the data source with a remote domain user (123 in your example). Glad to see that's not the case!
When you tested the credentials with SSMS were you on the remote domain?
It looks to me like the impersonation is implicit: https://msdn.microsoft.com/en-us/library/ms160330.aspx
Theres a couple of notes at the top of that page about remote access being enabled, and the ports that should be open too.
Theres a bunch of potentially useful information about what your connection string should look like here too:
https://msdn.microsoft.com/en-us/library/ms156450.aspx

Cross tab Date Column Grouping

Hi,
I have a cross tab in my report which displays no of tickets opened grouped by day, week or Month, grouping is done based on a parameter GroupBy, which has Day, Week, Month values
Incident   Jun -99 Jul-99
Priority1      10          20
Priority2      45          23
if user selects day or week, cross tab should display column in dd/mm/yy format, if its month, MMM-yy format.
I have created formula which returns a date type
GroupBy = Day then Opendate
GroupBy = Week then opendate -dayofweek(opendate)+1
GroupBy = date(year(opendate),month(opendate),1)
and used this date formula as column in cross tab. I tried to format using custom date style...but its not working in cross tab.
if I use totext to format the date formula, data will not be in sorted order...ex, its showing jul-99 before jun-99
can anyone help?
Thanks in Advance,
Jyothi

You can avoid multiple cross tabs by using the Display String expression under Field Formatting. The expression that is entered in this field is what is displayed as the field value in the report. Use the same logic as you are using for calculating the value, except return CStr(CurrentFieldValue, <format>), where <format> is the formatting code for the desired date format based on GroupBy.
HTH,
Carl

Cross tab data is getting multiplied if i use multiple queris in asingle report

HI,
i am using multiple queris for displaying data and graphs(charts).
my requirement is to display 2 charts and data in crosstab in a single report.
all the three thing (2charts and crosstab) will use diffrent values.
I am writing 3 sql queries for getting appropriate values for charts and crosstab.
Now the problem, both charts and crosstab are taking the values of all 3 queris
i.e if i added crosstab first to the report values are coming correctly. After that if i add graph cross tab values are getting changed and graph values are not getting properly.
if i add graph first then its coming correctly.
if i tried to add all 3 components then values are going cores...... ?

When you say you are writing 3 sql queries what do you mean? Are you creating 3 SQL command objects in the database expert? If so this is your problem, Crystal will pull a cartesian product through (this is every possible combinatin of rows from the 3 queries).
If your 2 graphs and 1 crosstab are based on different datasets the way to approach this is to create each on a seperate report, then create a new blank report and add each of your 3 reports as subreports in the report footer.
Hope this helps,
Toby

Is there a Diadem script or command to determine the maximum lag of cross correlated data?

I am analyzing multiple data sets and ultimately need to plot and align 3 similar curves based on the the maximum cross correlation lag. Is there a function that will do this in Diadem or has anyone written a script to do so? I am new to Diadem and am still learning how to do this. I know I can do it in Matlab...the generic coding is
%calculate cross-correlation
c = xcorr(a,b - mean(b),'coeff');
% return maximum value and its index
[d,f] = max(c);
timelag = (length(a) - f) * timestep;
I would really like to figure out how to do this in Diadem as it seems like it will be easier based on the amount of data I am going to have to analyze. Any thoughts would be greatly appreciated. I have found and was looking at the cross correlation function in the signal analysis toolbar but I do not see where lag is calculated.
thanks!

Hi jgabe,
Here is an example VBScript that uses cross-correlation to time shift all equivalently named channels across the various groups in the Data Portal.
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Attachments:
Linearize Data.zip ‏43 KB

Cross investment data

Similar Messages

Maybe you are looking for