Cross-platform issues with Initial View

When I specify my Initial View setting on Acrobat Pro (10.1.9) on my Mac, they are not honoured when the PDF is opened on a Windows machine. I've noticed this specifically with the Page Layout view. Any help would be appreciated.
Thanks.

Hi Bill.
I open the PDF in Acrobat Pro, then go to File > Properties (cmd + D), choose the Initial View tab and change the setting there. I then OK that and save the PDF. When I open the same PDF again on the Mac (in either Reader or Acrobat Pro) the settings I made are honoured. When I open the same PDF on a Windows machine, they're not.
J

Similar Messages

Cross platform issues with InDesign CS5 or earlier

Potential client would like me (designer on a Mac) to design print docs which they can then edit on their PCs. Would love to hear feedback from others about any cross-platform issues/best practices suggestions. Thanks!

No problem at all, the only thing you have to do is make sure you both have the same fonts in a flavour (Opentype) that you can both read. So when you send them a Indesign document using these fonts they should be able to open it up on a PC without getting a "missing fonts" warning. Once you've got that sorted you're away, I do exactly this all the time.
Oh and of course you must have the same version of Indesign! You can save back one version (or from CS5.5 to CS4) but it's not recommended for this type of workflow.

Issue with Tree view

Hello experts,
I am facing a very strange issue with tree view.
I have created a custom component with a tree view. All data are coming in the tree view. But the strange thing is that the data is not getting displayed on the screen.
I am sure about the data because, when I am selecting a line from the tree, the data from that line is coming to the main screen.
Please help!!
Regards
Debolina

Hi experts...
Any pointers to this issue???
Please help!
Regards,
Debolina

Network issue with initial connections on Hyper-V

This is the opposite of all the other networking issues I have seen with Hyper-V- anyone run into this?
I am running Hyper-V on a Server Core installation, and have had the same issue when I used Server 2012R2 as when I used Server 2008R2 on the same server as a virtual host. The server is an HP ProLiant DL360 Gen8 with 2x 8-core processors, 32 GB RAM. The
VM is sized and configured to stay within 1 NUMA node. It uses a single port of the 4-port HP/Broadcom 331 NIC, with all the TCP LSO settings disable at the switch, host, and guest, same with the power management settings. We have ProxyARP on the network,
so I have set the ArpRetryCount key to 0.
I have seen it happening with and without SR-IOV enabled. The guest OS is an RDS server, so for the sake of our CAL's it has to stay at Server 2008R2. I have set up a HOSTS file to mitigate this problem, as it seems to be a DNS issue- Here's what happens:
The first time I visit a resource, the server will timeout. An example not in our HOSTS file does this consistently: If I go to https://mail.mydomain.com/OutlookWebAccess, it spins for a couple of minutes before timing out. I hit refresh and the page loads
immediately. This server is colocated in-house, as is the mailserver. I'd say it is a DNS issue at some level, but I'd like to know what level it is- Is it just timing out trying to cache the DNS request, or is there a performance issue with a DNS server on
the network? (All of our DNS is AD-integrated running on DC's).
Here is where I'm seeing this:
Internet Explorer- described above
Salient Interactive Miner- at the login screen, it searches for a database and times out. If I go to the setup and enter the IP address, it still times out. It will not find the database server until I quit and restart the program. If this is the same issue,
it would obviously not be a DNS problem.
I DON'T see it in GP9 connecting to a datasource
Prior to setting up the HOSTS file, I saw this in Windows Explorer connecting to network shares on the same LAN segment.
This appears to only happen to the Hyper-V guest OS. As a best practice, whenever Windows Update runs, I update the Integration Components.
I have the bindings properly ordered on the guest VM, with the network adapter the goes to the physical NIC first, and IPv4 ordered before IPv6.
All updates are isntalled, and the firmware is at it's latest revision.
Any ideas?

Hi Daniel,
" This appears to only happen to the Hyper-V guest OS. "
Do you mean that any other hosts can access the network resource normally except these VMs ?
If yes , my suggestion is to disable the VMQ on the physical NIC for the VMs , then try test again .
Best Regards
Elton Ji
If it is not the answer please unmark it to continue
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Issue with Adobe Viewer.

I am a Coldfusion developer. I have an application that takes some coldfusion variables and populates a pdf form that was created in LiveCycle. In the past this worked fine. Today someone told me of an issue they are having. Now when the view this pdf in a browser the fields are not populated. This is a major drawback from the way things use to work. Is this a bug or did you intend to do this?

Yes, I have tested on Chrome, Firefox, Safari, Opera and IE. It does not work in Firefox 19 or in Chrome 25. In Firefox I only get the hard coded text of the form. In Chrome I get the placeholder text in the form fields. Firefox shows a yellow message at the top "This PDF document might not be displayed correclty." and their is a button labeled Open With Different Viewer. Some of my users are not very tech savy and may miss that option. I am populating the form using the cfpdfform tag with an action of populate on a pdf form created in live cycle. I use the cfpdfformparam tag to put the values in the fields.

Performance Issue with PAY_BALANCE_VALUES_V View in Oracle R12

Dear all ,
We have recently upgraded from 11i(11.5.10.2) to R12(12.1.3). We are facing one Issue with slow performance of the queries where PAY_BALANCE_VALUES_V is used. We have so many reports & logic in Payroll which uses this View.
In 11i this works fine, however in R12 it takes very long time. There are no configuration changes we have done from 11i to R12.
Is there any way to optimize the performance or alternate way to retrieve the Balances Data in Payroll ?
Any heads up would be highly Appreciated.
Thanks,
Razi

Hi Razi,
The balance related performance issue is written in the following note.
Note:1494344.1 UK Payslip Generation - Self Service Program Takes Much Time To Complete (Performance Issue)
This issue was fixed in HR_PF.B RUP6 or patch:14376786. Did you apply this patch? If not, I suggest you apply it.
Also, HR_PF.B RUP6 has some balance related performance issues.
If you already have applied HR_PF.B RUP6, I suggest you log a SR with SQL trace.
Thanks,
Hideki

Issue with Smart View when trying to connect to Planning/Essbase

Hi All,
I'm facing this issue with Hyperion 11.1.1.3 & 11.1.2. In Excel, I've created a connection in SmartView by giving the URL as http://ServerName:8300/HyperionPlanning/SmartView. After that i'm able to see "Servers" and when i started expanding that, it displayed the server name. When i clicked on the server name, it should display the Planning Application name right ? instead of that just a Cuble symbol is displaying. Do i need to make any settings for proper display of the Planning Application names ? This is perfectly working fine with HFM. I'm able to see HFM application names. Pls. advice

I was trying for shared conenction this morning and it was not working. Now all of sudden it started working. Even i've checked now, the private connection is also working fine with the URL http://planningserver:8300/HyperionPlanning/SmartView

Issue with Smart View for Planning Connection

Hi All,
I'm facing this issue with Hyperion 11.1.1.3 & 11.1.2. I've created a connection in SmartView by giving the URL as http://ServerName:8300/HyperionPlanning/SmartView. After that i'm able to see "Servers" and when i started expanding that, it displayed the server name. When i clicked on the server name, it should display the Planning Application name right ? instead of that just a Cuble symbol is displaying. Do i need to make any settings for proper display of the Planning Application names ? This is perfectly working fine with HFM. I'm able to see HFM application names

Well, the thing I always forget and have pulled much hair out over is to add the essbase server access to the planning group.
Check on that, and I will loosen the rocks in my head to see what else I can suggest.
Robb

Issue with Sales Views in MM01

Hi gurus,
We need to create a material with only views for Basic Data 1&2, and Sales Org. Data 1, Sales Org. Data 2 and Sales General Plant data.
The sales organization is created but when trying to assign the material (with existing Basic Data 1&2) to the Sales Organization the system is giving error "sales org. and distrib. channel invalid sales area".
Any idea what additional settings are necessary to assign the material to the sales org. ?
Thanks!
VL

Sales organisation itself is not enough, you have to define distribution channel also:
SPRO > Enterprise Structure > Definition > Sales and Distribution > Define, copy, delete, check distribution channel
Distribution channel has to be assigned to sales organisation:
SPRO > Enterprise Structure > Assignment > Sales and Distribution > Assign distribution channel to sales organization
Division should also be defined and assigned:
SPRO > Enterprise Structure > Assignment > Sales and Distribution > Assign division to sales organization
It's starnge that you want to create material master and still your config has such serious deficiencies...

Planning Data from formatting issue with Smart view in 11.1.2

Hi,
We are facing one strange issue in Smart view.
We have created a dataform in Planning as follows:
Columns:
FY10 FY10 FY10
Budget Budget Budget
Jan Feb Mar
But when we open this in Smart view, we are getting the columns as follows:
FY10
Budget
Jan Feb Mar
i.e. year and scenario are spreading across months instead coming at each column level.
We are using Hyperion Planning 11.1.2, Smart View 11.1.2 and Office 2003.
Please help us.
Thanks,
Naveen Suram

Are you saying you want the dimension members FY10 and Budget to be repeated in each column?
I think that can be done for Ad-Hoc Analysis mode, but not where you have opened up a Planning form.
Cheers

Cross-Platform Issues?

I am using contribute on a PC (I'm the administrator) and another office wants a copy of the software but they use a Mac. Am I going to have any issues with this?
Thanks.

If you go up two levels in the breadcrumb trailat the top of the thread to the main discussions page you'll find a little search widget on the right that searches only in the ID related forums.
That's the place to start looking for other threads that might have similar experience.

Numerous ALV Issues - Saved Initial View shows table with no columns

Saved a personal View and made it initial. View was saved by Sorting and FIltering certain columns. When I retrive the view, it shows the tabke has no columns at all.
This is in addition to the Problem in getting DropdownbyKey inside a ALV Table Cell in DropdownByKey inside ALV Table - Problem with Value set
Regards,

You have forgotten to set a cell variant. I had the same with setting a ProgressIndicator cell-editor to a table column as default editor. This causes the column to be hidden on the table while it did show up in the settings dialog. I removed the set_editor( lr_progressindicator) and created a cell variant instead with this lr_progressindicator. You then need to add this cell variant to your column. By default it will select the standard viewtext-cell-editor (which can only be textview and inputfield, like when you create a table yourself in a view), but if you use a cell variant, it will display the required cell editor if you set it (last line of the code).
<b>In your case, replace lr_progressindicator by your ref_dropdownkey.</b>
DATA: lr_column_settings    TYPE REF TO if_salv_wd_column_settings,
        lr_column             TYPE REF TO cl_salv_wd_column,
        lr_column_header      TYPE REF TO cl_salv_wd_column_header,
        lr_cellvar            TYPE REF TO cl_salv_wd_cv_standard,
        l_cellvar             TYPE string,
        lr_progress_indicator TYPE REF TO cl_salv_wd_uie_progr_indicator.
lr_column_settings ?= wd_this->mr_table.
lr_column = lr_column_settings->get_column( 'STATUSBAR' ).
lr_column_header = lr_column->get_header( ).
lr_column_header->set_text( 'Completed' ).
CREATE OBJECT lr_cellvar.
l_cellvar = 'CV_SB'.
lr_cellvar->set_key( l_cellvar ).
CREATE OBJECT lr_progress_indicator.
lr_progress_indicator->set_percent_value_fieldname( 'STATUSBAR' ).
lr_progress_indicator->set_tooltip( 'completed' ).
lr_cellvar->set_editor( lr_progress_indicator ).
lr_column->add_cell_variant( lr_cellvar ).
lr_column->set_selected_cell_variant( l_cellvar ).
I hope this will solve your issues.

Cross Platform issues working with an external hard drive

Lightroom 4.0 on both machines -- Ok, I use MAC at school and Windows 7 at home. I put all my files on an external hard drive named ALR which is mapped on my PC to drive L. When I edit any photo at school and go back to the PC machine at home, I get the cannot locate original picture in location //volumes//ALR// if I'm on the MAC after editing photo's at home on the PC, I get the message cannot locate L:\ALR .. etc. It keeps looking for the drive designation from the other computer. Weird to me is that all the files are located on my external hard drive and I do not move them from there, also my catalog is located on the external drive also (no lectures on this please, I back up and its for a lightroom class) The professor has no idea why that is happening as he knows NOTHING about pc's.. Anyone else have an idea - in the big scope of things it is not a big deal, but it is just frustrating to have to remap my directory every time.

Can we see a screenshot of the Folders panel please, before you remap it? I just need to be clear on whether you're having to 'find missing folder' on a single folder (which is quite normal as Mac and Windows see the drive completely differently) or whether there's a different issue here.

Issue with smart view add-in in MS word 2003

Hi,
I have smart view 9314 and office 2003 installed on my machine. I can see hyperion tab in excel and it works fine but i can't see hyperion tab in word or powerpoint. Its not in disabled items for word. I tried to add HsTBar.xla in word using Templates and Add-Ins option but it throws error: Invalid add-in. Any info to resolve the issue would be highly appreciated.
Thanks.

Office 365 Web Apps are not supported and cannot be supported as there is no platform for add-in's in that environment. http://www.microsoft.com/en-us/download/details.aspx?id=13602
Most Office 365 uses cases and users end up with Office installed on the desktop and at that point we are talking about normal Office Support. Right now it is up to the Office 365 administrator to determine the version of Office to be used by their 365 users. http://onlinehelp.microsoft.com/en-us/office365-enterprises/ff637585.aspx
Short answer is that Smart View does not support Office 365 Web Apps and there are no plans to support the Web Apps.

Issue with Smart View Help Contents using v11.1.2.0.01

Hi there,
I just installed v11.1.2.0.01 (Build 003) of the Smart View add-in on a MS Windows XP SP2 PC with MS Office 2003 SP3.
Unfortunately, the Help Contents in MS Excel does not seem to work as whenever I select Smart View > Help > Contents, nothing gets displayed. Selecting Smart View > Help > Technical Support and Smart View > Help > EPM Documentation takes me to various links on the www.oracle.com site.
I uninstalled then re-installed this specific version a few times but to no avail. I even checked the contents of each subdirectory where Smart View has been installed but could not find any Help files whatsoever.
1. Has anyone ever encountered this issue?
2. If yes, what do I need to do to resolve this issue and get the Smart View Help to be displayed?
Thanks in advance,
JBM

Well, reading the documentation about knowing where to find the documentation would have actually helped. At the bottom of page 10 of the Smart View ReadMe document, the following is mentioned under the "Documentation Updates" section:
"For Smart View online help to be available, the Shared Connections URL on the Advanced page of the Options dialog box must contain an EPM Workspace URL."
This question is now answered.
JBM

Cross-platform issues with Initial View

Similar Messages

Maybe you are looking for