Cross-platform network instability
I recently started a new job where everything is Apple, including the Airport Extreme. After investigating some to figure out how to configure the WEP key on both the Airport and my PC laptop, I was finally able to connect to the network.
Since then, however, the network has become unstable. The modem stays connected, but the Airport fails routinely - possibly releasing its DHCP settings. The failure doesn't seem to coincide with any operations, Mac or PC. My network/PC background is strong, but I never used Mac hardware prior to this week. As suggested by the Apple support page, I contacted our ISP and they reported no issues with 802.11-compatible wireless networks.
If anyone has suggestions, I'm all ears...
When you checked into the Extreme settings, did you use the Windows®
AirPort Utility (download from Support) or does someone else there admin
the base stations and keep it secure so as to not allow other non-admin
access? Friends and relatives who have PCs have no issues in connects
to my or other Apple AirPort Extreme Base Station networks.
If all the computers in the local wireless network use the 802.11/g setting
and the base station is set specifically for that (and not b/g) it should be
more stable and alot faster, but 802.11/b users would not have access.
There are several pages of AirPort Support documents; some are general,
a few apply to Windows & Mac users: http://www.apple.com/support/airport/
Hopefully someone with mixed platform experience will have a more direct
answer for you to check. Best of luck in this issue!
PS: Did you find an applicable software update for your PC
among these for working with AirPort base stations? There
are a few and maybe they are not needed; or they are.
http://docs.info.apple.com/article.html?artnum=75422
Similar Messages
-
Cross platform networking issue
Okay, my group consists of about three dozen Macs (most on 10.3.9, but about half a dozen on 10.4.3) and we are hooked up to a Windows-based network which uses Extreme-Z IP to serve up the shared volumes to the Mac users. Recently, the corporate IT folk upgraded the network file servers. Now we can connect to the new servers via the "Connect to Server..." dialog, however, on most of the machines, the new file servers don't appear when browsing the network in a Finder window (on a few machines they do show up). At first I thought this must be a Tiger vs. Panther issue, but I quickly discovered that most of the Panther machines have the same trouble. Anybody got any ideas why this would be an issue on some machines but not others?
Thanks in advance.
Dual 2.0GHz G5 Powermac Mac OS X (10.4.3)Here's an update: What I said in my first post was a little misleading. You can actually see the file servers from all the machines, but not in the way we used to be able to. Previously when browsing the network we could see the Appletalk zone as a folder on the network and all our file servers showed up in that folder. In addition to that, a folder called local would show up, and all our file servers would also appear in that. What I didn't realize is that folder exists on the Tiger machines as well, except it's called My Network. So we can browse to all the file servers that way (which I'm guessing represents Rendezvous?) but they don't show up on any machines in the Appletalk zone folder. My guess now is that this is an issue with the way the servers are configured. It's no longer a crucial issue (since everyone can get to the shares via the Local (or My Network) folder) but I would still like to know what's going on. Anybody got any insights?
-
I have used mac for many years but just got my new Macbook OSX love it, but I am having trouble with a network i use for work, they are all P.C based and I don't seem to be able to log on to the server. It is Window server 2000 I think it will not allow me to connect. I can see internet fine and other p.c OK some I can connect to but others will not allow me to log in even as admin password etc.
I have tried everything I can think of creating new user on server for mac etc. Although there is no mention of Mac setting on the P.C server I should be able to talk to it? Vista P.C on network seem a bit better than XP but generly having problems... ahh helpI'm assuming your trying to access a file share. Try reading through this.
http://guides.macrumors.com/NetworkingWindows_with_Mac_OS_X#Windows_Server_2003Authentication -
Hi, I'm running a Macbook with 10.5.6 installed, and a pc with Vista. My problem is that I can't get the Mac to recognize any of my share folders on my pc using command + K. The pc recognizes the Mac and I can drag and drop files no problem, but I cannot get the Mac to do the same. My workgroup name is the same on both, and I have SMB turned on. Any ideas?
Also, I'd like to setup printing through the printer hooked up to the PC but the windows tab in the printer settings (on the mac) doesn't allow me to type in the name and workgroup the printer is on. It is set up to share on the pc.
Thankswhen entering the pc's server's address are you using the syntax
smb://192.168.x.x or whatever its IP is. -
External Hard Drive won't appear on PC (want cross platform)
I have an external USB Hard Drive. I formatted it using the Disk Utility, OS Format and Journaling. Did a small partition in case I needed a system boot drive. Now my sis needed to backup her laptop (Dell laptop), but the drive won't appear in My Computer, it recognizes there is a USB device on the lower task bar, but no drive anywhere.
Do I have to reformat? what steps do I need to make this USB drive cross-platform friendly?
PaulHi, Paul.
You may not want to reformat the drive as FAT-32 since there is a limit on the size of the partition, the maximum file size, and other issues, especially if her Dell's drive is formatted as NTFS (FAT-32 does not support NTFS extended attributes). FAT-32 is unsuitable for backing-up Mac OS X volumes as it cannot preserve the extended attributes (permissions, etc.) employed by Mac OS X.
It's really best if you each have your own external hard drive for backup, as part of implementing a comprehensive Backup and Recovery solution, such as I use and detail in my "Backup and Recovery" FAQ. You also don't want one person inadvertently writing over another person's backups, which could happen if one is not careful. Furthermore, it is often easiest for recovery.
How one handles backup in cross-platform environments is tricky and depends on the native formats employed by the different computers involved, and whether backup will be performed over a network or by directly connecting backup drives to the computers one is backing up.
To enable her Dell to use the Mac-formatted drive, install Mediafour's MacDrive for Windows on the PC. MacDrive for Windows is probably the state-of-the-art application for enabling you to use Mac-formatted disks and hard drives on Windows-based PCs.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link. -
Loss of Edits in a non cross-platform InDesign/InCopy Workflow
I have read, and understand, the cross-platform issues related to loss of edits in InCopy. We are experiencing the same issue on an all Windows network. Some authors have experienced the following issue:
Author checks out a story and edits the content
Author checks the story in
Later, the Author checks out the story , but the edited content is missing
Author becomes frustrated ;-)
The worst part of this issue is that it does not happen consistently, it is random.
We are running InDesign on Window-7 64 bit machines, InCopy on Windows XP 32 bit machines, and the file server is a Windows 2003 server. Or workflow is designed so that only one author and the InDesign designer has access to the assignment file (We create assignments by author instead of by section).
So my question is, has anyone else experieinced these problems? Any thoughts would be appreciated.Yes, we are using InDesign, InCopy, Illustrator, and Photoshop CS5. We were very excited about having the ability to mix 8.5x11 and 11x17 pages for the proposal we are in the process of creating and decided to be early adopters. I hope they get the bugs fixed soon....I am confident that they will.
Thanks! -
Issues when a cross platform android app is run on Blackberry 10 alpha simulator
I am facing problems in running a cross platform android App in blackberry 10 Alpha simulator.The App works fine when run in iphone,android devices.But when I run it in blackberry 10 it doesn't load the template files hence a blank screen.The project is based on backbone framework hence template files.Currently the files are local in my hard-disk. I am loading the templates using an ajax call. The logcat output generated of the same is listed below:- 02-08 05:30:51.861: D/CordovaLog(233525377): {"readyState":4,"responseText":"","status":404,"statusText":"error"}
I have added in config.xml file . Is there anything else I am missing to make the app run on blackberry 10?? I had the same issue with nook HD which was avoided by using super.appView.getSettings().setAllowUniversalAccessFromFileURLs(true); in the onCreate method.But since blackberry uses 2.3.3 of Android,I am unable to add the same settings. Please let me know If I am missing any specific configuration related content for blackberry 10.ThanksHey Steve_web,
This issue can be caused when MAC address filtering is enabled on the Wi-Fi network, and the MAC address of the BlackBerry Playbook is not accepted. Try adding the MAC address of the BlackBerry Playbook to the accepted MAC address list for the Wi-Fi network and test.
The following article may be helpful as well:
Troubleshooting Wi-Fi and networking on the BlackBerry PlayBook
http://btsc.webapps.blackberry.com/btsc/KB26096
Also if you contact the BlackBerry PlayBook support team they can do log review to determine the cause; you can find the contact information here: http://us.blackberry.com/legal/blackberry-playbook-complimentary-support-plan-terms-and-conditions.h...
Thanks.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
hi all,
just wondering i have set up a AE render farm on pc (2014 v13.1.1), i know it can render PC AE renders if a pc sends a job to it but can it render mac render jobs?
robAfter Effects project files are cross-platform compatible. Things to watch out for are that file paths are valid, and that fonts and plug-ins are installed and working. You should open the project on a Windows machine to check for any errors, especially with fonts. Some fonts may have different names between platforms.
When using Collect Files, the source file paths are set relative to the project so this is usually not a problem. But you must make sure that the output file paths are also valid; using the Change Render Output To option in the Collect Files dialog can help with this.
More detail here:
After Effects Help | Automated rendering and network rendering -
Data Movement in Cross Platform
Hi,
Greeting!..
My scenario is
Host A - Hp-Unix
Host B - Window 2003 Server
1. Is the datapump dump file which is created in Host A can be import in Host B? is it so please forward the steps
2. from Host A to Host B in need to transfer the data incrementally & regularly. How can i make this as automatic?
Thanks in Advance
Baalaji VHi Balaji,
Yes you can import dump on cross-platform but you may need to check syntax in the Database Utilities guide available on Oracle Technology network. Here is direct lik http://www.oracle.com/pls/db112/to_toc?pathname=server.112%2Fe16536%2Ftoc.htm&remark=portal+%28Books%29
You can create and schedule two jobs in OEM. First job to export you source schema on predefine interval and store dump file on a shared locaiton that host b can access as well then next job will import that dump file into host b database.
If your purpose is to replicate data regularly then you should also look using streams.
Harish Kumar
http://www.oraxperts.com -
Cross platform CS on PC to CS3 on Mac does not work like video says
Your video on cross platform workflow states that you can import older Premier CS files on a PC into CS3 on a Mac. I tried this and get the message, "this project was saved in a aversion prior to Adobe Premiere Pro CS3 and cannot be opened on a Mac. Please refer to the User Guide for import options." I guess I have to assume then that the video, www.adobe.com/go/vid0236, is wrong about this? Can someone please explain how I can salvage the work I did 3 years ago on Premiere Pro 1 on a PC when I am now exclusively working on the Mac in CS3?
Thank you.Ty,
This has come up a few times and the solution is to find a PC CS3 user, who will Open the Project and then Save it in CS3-CS4 for you. I does mean that you'll have to befriend a PC-person, but who knows, maybe you can reciprocate later on. In each previous instance, this workflow, PC to PC to Mac worked perfectly. Note: the same holds for Encore Projects, and there is some PC to PC incompatibilities between very early versions and later versions. I had to Open and Save an Enocre 1.0 Project in CS2, so a CS4 (only) user could then Open in CS4. This stuff happens, and the skip in Mac porting can play a role in it. If I had CS3 on my PC's, I'd do it for you, but CS2 will not hlep you.
I believe that P 6.5 was the last previous version ported for the Mac, until CS3.
Good luck,
Hunt -
Need Help in Cross Platform Migration
Hi Gurus,
can you please tell me best way to do Corss Platform Migration with minimum down time and we are planning to do from AIX TO HP-UX.
oracle version is 10g
and can we do the data sync using streems if it is can you give the steps to configure streems in cross platform.
Thanks in advance.High Availability Customer Case Studies, Presentations, Profiles, Analyst Reports, and Press Releases
[http://www.oracle.com/technology/deploy/availability/htdocs/HA_CaseStudies.html?_template=/ocom/print]
Check under Transportable Tablespace at the bottom
[Multi Terabyte Database Migration|http://www.oracle.com/technology/deploy/availability/pdf/TheHartfordProfile_XTTS.pdf]
HTH
Anantha -
Steps to create Cross-Platform Transportable Tablespaces
hi
what is the steps to do Cross-Platform Transportable Tablespaces.
i want to perform this in my pc, i have linux and windows in same PC, i want to migrate from linux to windows and vice versa.
so can i know complete steps and commands to perform Cross-Platform Transportable Tablespaces. to get complete knowledge i am doing this so i can implement this in my office when any migrate issues comes. so once i do this i will get confidence so that i can do the same in my office which saves my time.
veeresh s
oracle-dba
[email protected]Hi, also you can review the Note:413586.1 into metalink site.
Good luck.
Regards. -
I have ancient Mac photoshop and pagemaker files. i need best cross platform product for windows that can access these files. adobe photoshop is my primary concern. I understand the indesign cs2 will import old school mac photoshop 6.0.x but is not compatible with windows 7 ... thank you.
In particular we use windows 7 x64
So in summary, need to determine which Windows 7 x64 version of Indesign CSxx will still open archaic Mac Adobe files (layouts, EPS, etc). Or is there a similar product that must be obtained. I prefer to stick to Adobe products, however, if I must go elsewhere and you can help -- please advise.
Also, if you know what I should obtain, does this product have a trial download option that I can test functionality before purchase? Warranty when I do buy information -- and return policy in general?
Many thanks.PM support has long been pulled from InDesign. You are going to need some old version like CS or CS2 and save an intermediate step to ID files. PS is not a probelm at all. All programs have 30day trials and Adobe has a general 14day return policy. Refer to the product pages on teh website.
Mylenium -
I am using Illustrator to design a PDF. Because it's in Spanish, accent marks and other special characters are needed (á, ñ).
When I export the PDF from the ai file and view it on my mac it looks fine. However, when I open it on a pc some of the special characters are completely missing.
I tried Creating Outlines with the text, although it will make it harder to update in the future and so less preferable to leaving the text editable. Creating Outlines works fine on the mac, however on the pc the L's appear thicker than they actually are.
Does anyone know how to make special characters legible cross-platform when creating a PDF using Illustrator?
Thanks!!Does anyone know how to make special characters legible cross-platform when creating a PDF using Illustrator?
Yes. You use a correct OpenType font that has the glyphs in the place where they belong and can be embedded without limitations. Older TrueType or PostScript fonts are simply unsuitable as are fonts that cannot be emebdded and require to be installed locally. It all comes down to system language settings vs. the unified environment inside acrobat. This also requires any PDF to be created on systems with the language settings correct in the first place, i.e. creating Spanish text with a Japanese version of AI would be pretty desastrous due to how foreign language fonts are accessed... check these things and then try again. If possible, enforce embedding of the full font in the PDF settings, not just a subset and choose a suitable font.
Mylenium -
Email images and signatures not displaying cross platform??
I have noticed something odd when emailing people who are using windows. For some reason, attachments and signatures that are images (.jpg files that WILL open in a browser on the PC) or PDF's do not show up in the body of the email I send to them. Yet they are using HTML email, and emails they send to ME do have images showing up correctly in both the body of the email and the signatures on my Mac. Is there something on my end that I need to do in the formating to make this cross platform? Has anyone else run into this?
I'm confused, I thought HTML was HTML....Same here... in Outlook 2007 many times the Mac email signature ends up as an HTM attachment... Any news on this odd behavior!
Maybe you are looking for
-
This morning it was working fine, but I tried to put 2 addons, "adblock" and "Forcastfox Weather" . I have both of this addons in my Desktop as well as in Ubuntu. The problem is in Windows XP
-
How can i change my email address for cloud
I keep getting messages that my iCloud is not active. This may be becuase Ive changed my email address What to do to solve this?
-
Should I reformat and clean install to my iMac?
I have an 27" iMac that is about five years old. It was custom top of the line i7 hyper threading 16 GB of RAM yada yada but it's much slower to boot up and the 1 TB hard drive is almost full. I'm sure some of that is orphaned files and other junk. I
-
Write traces to spreadsheet file mis-wiring
I want to extract the data from the DSC database based on a user- or program- defined time range and write that data to a text file. I have the first stages of that set up here, but there is a broken wire (cluster type) that I don't understand what a
-
Streaming your mac to Apple TV
Hello My name is callum and i have the newest version of OS X (Mountain Lion) and i was wondering, Can i stream what's on my mac to my Apple TV through Air Play, Just like i can on my iPad? Thanks