Cross plattform licence? switch?

Hi there.
im about to buy the cs5 for students
but i know that i will switch back to windows (dont know when, maybe 1 year, maybe 2).
Is it possible to use the mac licence for a windows installation
or to switch it? can i do this when i buy an update?
Greetings

Adobe licenses are platform specific. Commercial versions do carry the ability to switch platforms (for current versions only) but I'm not sure about student versions.
You should call Adobe and ask.
Bob

Similar Messages

  • Software licenses are compatible with cross plattform ?

    Hi All,
    Is Software licenses are compatible with cross plattform ? like license of Oracle with HP-UX can be same for Oracle on Linux ? not need to buy separate License ?
    Regards,
    Mark

    873426 wrote:
    Hi All,
    Is Software licenses are compatible with cross plattform ? like license of Oracle with HP-UX can be same for Oracle on Linux ? not need to buy separate License ?
    Regards,
    MarkLicensing is a legal contract between Oracle and the customer. Therefore, all licensing questions should be directed to your Oracle marketing rep. If Oracle finds you in violation of a license agreement, an opinion you got from some stranger on the web won't be worth the pixels it was displayed in.

  • Replacement of Oracle RAC Pvt. Interconnect from Cross-Cable to Switch

    Hi,
    Previsouly i configured my Oracle 10g RAC R2 with a cross cable b/w two nodes for Cluster Interconnectivity but now due to numerously rebooting issue i am going to replace it with a dedicated Gigbit Ethernet Switch, by doing so would it effect my previous coonfiguration of RAC clusterware or changes of any sort ??? I am keeping the same IP Scheme for my Public, Private and Virtual Interfaces.
    Anyhelp on this would be highly appreciated.
    Thanx in advance

    Check the nic mtu by
    ifconfig -a
    if your interconnect NIC is configured with mtu is 1500 (which is the default mtu) or 9000 value make sure the your switch is configured with the same mtu value
    once the above s done then
    switch off machine.
    replace the cross cable with ethernet switch
    startup the machine. and start your clusters and services.

  • Cross grade licence CS6 PC to cs6 MAC

    I am user creative suite Production premium CS 5. upgrade CS6 and I will cross grade to MAC CS6. It's possible only with No Licence or I need a new Nbr ?
    Thank you for answer

    Yes, you can get what is called a "Platform swap".  Free of charge.
    Order product | Platform, language swap
    Gene

  • AIR right solution for us? (multiple Plattform, iOS, Android, Win 8, Win RT, Windows Phone 8

    We have to implement a APP for this plattforms.
    Windows 8
    Windows 8 RT
    Windows Phone,
    Android
    iOS.
    First it seems that PhoneGap could the right  framework for us. But PhoneGap has a limitation about the size of the local database, 5 MB, (if i unserstand right).
    But our database can be more than 10 mb.
    Required basic features are?
    Sync data with an online database.
    Create photos with camera and upload (is camera available on an Windows 8 Netbook in AIR?)
    Potential speech recognition, this means the APP displays an textarea and user can create some text in it with speech recognition (possible with native device features?).
    I know this are many questions.
    I hope somebody is reading this thread.
    I'm reading the roadmap of adobe AIR, but there are no comments about the new Windows 8 Phone.
    I am looking forward for answers.
    Kind Regards

    If adobe starts with Air i was an big fan of it, because since AS3 the language is very powerfull. We implement a lot of Business-Applications for the flashplayer with flashbuilder (aka. Flex).  On browsers we have sometimes discussions about the flash player,  especially since Apple vs. Adobe.
    But i thought at this time,  air is the "killer environment" for mobile apps. Until now i have only create some apps for android with air and windows desktop, so i have no experience with ios and air. But if i unserstand right, the compiler creates native ios code (what a great feature!). Fast  and i don't need any Xcode steps  (like in Phonegap), yes i know the phonegap-build-service.
    So i will be happy, if someone can help me with my decision with two options.
    don't use air ,  and only phonegap, mosync or some other platforms like this are the future for cross-plattform development for mobile apps.
    We  have a lot of experience in HTML and Javascript development in our company too, so the reason why we are interested on Adobe Air is not "missing knowledge" in web technology, but the HTML, Javascript implementations are slower, hard for debugging,  JS is not typed etc...(this list is subjective).
    Air has an future (not only for games, videos and sound)
    Pherhaps if anyone from Adobe reads this thread,  a hint   will be welcome.
    Kind Regards

  • CS5 cross language upgrade?

    Hi,
    I know Adobe provides free cross plattform or cross language upgrades. I am thinking of a simpler way: It would probably not be possible to do that from a universal English version, but would for instance a localized French language CS5 for Mac upgrade work with the CS4 German for Mac registration numbers? Or are they just incompatible?
    Thanks for any hint!
    alps

    I could talk on the phone to an Adobe customer care representative who after enquiring, said that the French language upgrade can be installed with the German serial number. Hope this is right!

  • Scripted backup of ESW series switches

    We recently purchased some of the ESW-540 Cisco switches for some lower end access ports.  I'd like to script the configuration backup using Kiwicat if possible, but haven't figured out how to either get into the cli, or config kiwicat to backup via webui.
    With the SRW Linksys line you could hit ctrl-z and type lcli to get into the cli interface.
    Anyone have any ideas?
    Thanks..

    Nothing to do with the UC - primary concern is standalone networks.
    Real life case:
    2 ESW switches in control room hooked up to SA540
    Closet switches are SRW2008's
    Port no more than two devices are supposed to go now has 4, add an SRW2008 to the desk location.
    Now, it turns out that there is a badly behaved device at the desk - a video player that spews all sorts of traffic when it's playing that doesn't play nice with others.  So I now need to set-up a VLAN crossing those two switches. Oh, and it turns out the customer decided to unplug an access point and plug it into that switch too which ended up causing a loop when the PC plugged into ethernet someplace else attached to the PC.
    Tasks:
    Ensure that the 2 SRW2008's have proper vlan assignments to setup a port vlan for that video server.
    Issues:
    Make sure you assign proper configs to both ends of each link
    Make sure not to confuse one SRW2008 with another
    If new vlan, make sure all other ports that need to see it can still see it.
    Applications for CCA:
    Visualize all VLANS
    Document port assignments (i.e. where is the video server vs. printer on that last leg 2008)
    More easily see port statistics across multiple switches
    So after I did that work, I realized that the SA540 wasn't really up to being an aggregation switch too and made the ESW-540-48 into the aggregation switch which required some more changes - however CCA made it easy...
    At another job, I have SA540 + AP541ns (upgraded from RVL200 + WAP54GP's) but if I had 300 series in CCA, I'd upgrade the SRW2024's and SRW2008's but without easy management tools, the labor cost will be too high to make their networks really managed.....CCA makes that layer of management cheaper.

  • Dashcode Webapp: browser.goForward method in multiple Plattforms

    Hello everybody,
    I'm trying to view a Dashcode created WebApp in another Plattform, for example the Browser of the Android OS.
    The Problem is, that the links of the listelements in the stacklayout aren't working. They are represented by a js Method called "browser.goForward". Why does this one only work in the iPhone OS and the Safari Browser? Is there any way to do this cross-plattform?
    thanks

    I figured it out
    The generator uses a wrong id for the label. The id of the label generated on list 2 is called label1 :-S
    changing this in the view2Controller fixes the problem
    if (templateElements.label1) {
    templateElements.label1.innerText = this._rowData[rowIndex];

  • CCA for 100 + 300 series switches?

    Is it in the roadmap to provide CCA control over 300 series switches?  We have a lot of SRW2008's put in before the 8-port ESW existed...and we have PITA vlan consistency issues out there too that I think CCA would help fix. 
    While I understand the "don't pre-announce products", I need a level of design intent around CCA - is it a tool for configuring UC series pieces primarily and all else is secondary? Or is it the multi-device config tool for all SBCS pieces?

    Nothing to do with the UC - primary concern is standalone networks.
    Real life case:
    2 ESW switches in control room hooked up to SA540
    Closet switches are SRW2008's
    Port no more than two devices are supposed to go now has 4, add an SRW2008 to the desk location.
    Now, it turns out that there is a badly behaved device at the desk - a video player that spews all sorts of traffic when it's playing that doesn't play nice with others.  So I now need to set-up a VLAN crossing those two switches. Oh, and it turns out the customer decided to unplug an access point and plug it into that switch too which ended up causing a loop when the PC plugged into ethernet someplace else attached to the PC.
    Tasks:
    Ensure that the 2 SRW2008's have proper vlan assignments to setup a port vlan for that video server.
    Issues:
    Make sure you assign proper configs to both ends of each link
    Make sure not to confuse one SRW2008 with another
    If new vlan, make sure all other ports that need to see it can still see it.
    Applications for CCA:
    Visualize all VLANS
    Document port assignments (i.e. where is the video server vs. printer on that last leg 2008)
    More easily see port statistics across multiple switches
    So after I did that work, I realized that the SA540 wasn't really up to being an aggregation switch too and made the ESW-540-48 into the aggregation switch which required some more changes - however CCA made it easy...
    At another job, I have SA540 + AP541ns (upgraded from RVL200 + WAP54GP's) but if I had 300 series in CCA, I'd upgrade the SRW2024's and SRW2008's but without easy management tools, the labor cost will be too high to make their networks really managed.....CCA makes that layer of management cheaper.

  • Can I suppress dialog outside script?

    I have a start up script that is used in cross-plattform production. It fixes the links of pictures. Works fine but the user still gets the warning message before the script does its work. If the document is opened by script I can suppress the dialog but I did not find a way for the regular InDesign Open action.
    Is it possible by script?
    (I think it was the case in the old days that setting userinteraction level to neverinteract  would get rid of all dialogs but this seems to be no longer the case.)
    Any idea?
    Thank you,
    Ralf

    Okay, sometimes it is a good idea to simply ask a non-scripting guy. One can just turn off the dialog in the InDesign preferences.
    I am sure you all knew that.
    Ralf

  • Purchased InDesign for Mac, want to use a PC

    If I already own InDesign CS6 for Mac, what are my options if I want to use it on a PC?  I use a Mac as my primary computer, but I have a powerful PC that I am interested in using as a backup.  I don't necessarily want to re-purchase my programs for it, though.

    With a perpetual license I think you could get a "cross-grade" to switch platforms, but only once, and it won't leave you any better off since you'd lose the Mac usability.

  • Is there a way to get the filename only on iOS using CameraRoll?

    This post is a sidetrack from this post: http://forums.adobe.com/thread/848761?tstart=0
    The method used in that post works perfect on both Android and iOS for selecting and uploading files.... BUT is there a way to get the filename of the file from the mediaPromise cross-plattform?
    If you let the user select an image it's not very nice to have the image be called "temp.jpg" after uploading - you want the user to know which image he/her have uploaded
    Any ideas? The "mediaPromise.file.relativePath()" works on Android but not on iOS. Not "mediaPromise["file"].url/relativePath/nativePath" either.
    Thank you

    Hey Joe what do you think of this solution.
    1. Let the user select the image
    2. Store the mediaPromise object in an array (event.data) for later use
    3. Load in the object using loadMediaPremise
    4. Add the loaded image into a movieclip (not visible from the scene)
    5. Resize that movieclip to let's say 100x100
    6. Use the BitmapData class to create a new bitmap from that movieclip and save it to storage
    7. Use the saved file within the app as a thumbail
    8. Use the mediaPromise object stored in the array later when the user wants to upload the images (then go through mediaPromise.open() on each image -> save to storage -> upload -> clear from storage -> loop).
    I haven't tried it yet (will do this week) but should that be a acceptable solution to the problem(?)
    I'm unsure if by just keeping the mediaPromise object within Flash will make the memory run wild though?

  • Opening .NEF files in PS3 on Windows XP

    I cannot open my .NEF images in my PS3 that I took on my Nikon D7000.  I am trying to convert them to .jpeg and I have tried to open them in Bridge and I have also tried to convert them to .jpeg through tutorials I have found telling me to use the image processor tool in Photoshop.  I cannot even see/view the images in Bridge and when I go to convert them to .jpeg, it tells me it cannot be done.  I am new with shooting in raw and I have always shot in .jpeg, so this is all so new to me.  I am not sure if all of my programs are way too outdated to be able to do this, including my operating system (Windows XP).  Shouldn't it be possible for me to open these images and convert them to jpegs?  Is there an update I need to download, or something, to make this work?  PLEASE HELP! 

    Thank you for your reply.
    I i can drag & drop a website from Firefox on Mac onto my desktop and reopen it in Firefox in Mac AND Safari Browser, why i cannot open them in Firefox on Windows.
    I can drag and drop URLs from Firefox on Windows and reopen them
    So what's so wrong about adding support for these kinda files making them work vice versa?
    I'm working this way because it's easier and faster and more organized for many reasons when exchaning URLs.
    Reason 1.: (keep things organized and in focus)
    If i send somone many many web documents (research), there is much more information at first sight, rather than copy pasting the URLs itself plus having to add a description to every URL.
    For example this particular page here where we are on it describes itself in the web document name:
    ''' opening .webloc files in Firefox on Windows Firefox Support Forum Firefox Support'''
    read it > double klick > open in browser tab > done
    or else
    '''https://support.mozilla.com/en-US/questions/761091'''
    if converted to text only (e-mail, etc.) then i have to > mark url > copy/paste > add in browser.
    Understandable?
    But, hey, there is no reason for a reason because there are so many reasons. Fact is that a file which was created from Firefox should work Cross Plattform.
    Or du you think i will stay with the external "webloc2url" Perl Script Application forever dragging webloc files from FF on Mac one by one?
    If there is a single person who can write a Perl Script application converting/re-writing webloc files to correct URLs and open them without the hassle, why a company like mozilla can't do implement the code into FF?
    Go and Google all the complaints about webloc files from Mac.
    I mean, ehm ...

  • Can I somehow let the user select multiple images from device?

    Is there any way to let the user select multiple images from the device media gallery?
    The CameraRoll only selects one image. And the FileRefernceList doesn't show thumbnails (so you have no idea what you are selecting).
    Is there a way, or maybe some sort of workaround, for this? Is there a way to maybe "read" the users gallery on the SD-card and output your own gallery that the user can select from?
    I'm developing towards both Android and iOS so cross-plattform is a must.
    Thank you guys

    +1 to this question. I'm looking to do the same thing but haven't had any luck yet.

  • Display a odt File in a Swing Panel?

    Hello
    I need a library to display odt files in a swing panel.
    I know that open office can be embedded in panels but this does not work for mac and i want my application to be cross plattform.
    It should also have a commercial license.
    best regards

    hbral wrote:
    ..I need a library to display odt files in a swing panel.ODS (Open Document spread sheet files) are just zipped XML. I expect ODT would be the same.
    So extract the XML, apply an XSLT that produces HTML or equivalent, and you should be set to drop that HTML into a JEditorPane (into a JScrollPane &) in the JPanel.
    ..It should also have a commercial license.You mean, the solution cannot be LGPL or GPL? That is a very odd requirement.

Maybe you are looking for