Cross-system stock transfer order (cross CC and without using APO)

Dear experts,
I want to set up a stock transfer order scenario cross two SAP systems (and cross company code).
The examples given in SAP documentation point to scenarios using a joint APO system.
At the same time the documentation reads:
The number of process variants is a result of the combination of system landscapes and organizational units:
- with or without joint SAP APO
Does anyone in here have experience in setting up this scenarion without using APO system and could help me with a process flow and the IDOC sequence used for this?
Thanks and regards
Norbert

Hi,
and thanks for looking into this.
No, I do not have an APO (company is using JDA/manugisitcs) and I want to set up cross system STO between two ECC 6.0 systems directly.
I do have a number of idocs running between the systems already and also know the place where to configure a plant for cross system goods flow.
What I would like to know is if this scenario is supported at all and if yes, what is the sequence of idocs and and what are their triggers (in other words - the technical side of the business process) .
Best regards
Norbert

Similar Messages

  • Material Division in Cross-Company Stock Transfer Order

    We are configuring the cross-company code stock transfer order process.  We seem to have all configuration done, but on the PO and Delivery the division that shows up at the item level is the sales area common division, not the division on the material master.  Due to this, the business area is not being assigned correctly (Plant/Division), thus now allowing us to post the invoice.
    Here are the specific Doc types we are using:
    PO: NB
    Delivery: NLCC
    Delivery Item Cat: NLC
    Invoice: IV
    Any ideas as to how to get the division from the material master to show up on the PO and/or delivery so that's what pulls into the invoice?  We also understand the the default Sales Order type DL is set for Delivery Type NLCC in the event there is no Sales Order.  For Sales Order Type DL we have set the Item Division flag, but that is not working either.
    Any ideas?
    Thanks
    Shane Newmyer

    Hi buddi,
    Thanks for the info, but neither of these things help with the division issue.  I need to have the material division on the PO, Del and Invoice...
    Any other ideas?

  • Query of stock transfer order

    Hi experts
    I created a cross-company stock transfer order. I use the standard po type.
    after creating the po. I use vl10b to create outbound deliver. no issue this step
    then I met problem when doing post goods issue. system gave the error message as following
    Purchase order 4500000123 does not contain items for a stock transfer
    Message no. M7153
    Diagnosis
    The system did not find any item for a stock transfer in purchase order 4500000123.
    Possible causes of error:
    You have entered the wrong purchase order number.
    The purchase order you have entered is not a stock transport order and the item category of the purchase order items is not U.
    The purchase order you have entered is not a standard purchase order for cross-company-code stock transfers.
    You can only post goods issues for stock transport orders belonging to this order type in the Sales and Distribution system (SD). You cannot enter the goods issue in Inventory Management.
    Procedure
    Check whether your input is correct.
    Check whether the purchase order is a stock transport order with item type U or a inter-company-code stock transfer.
    Perform function
    If you have authorization, check in Customizing for Purchasing whether goods issues for stock transport orders in the plant with this purchasing document type are to be posted in the Shipping system or in Inventory Management. If a delivery type has been entered in the Customizing table, the goods issue takes place in the Shipping system.
    In Customizing, choose:
    Materials Management -> Purchasing -> Purchase Order -> Set Up Stock Transport Order.
    could anyone give some suggestion?
    thank you

    Hi,
    check in the same node at customising whether you have assigned a document type for issuing plant(also whether its one step or two step) and also you have to assign a delivery typr for your issuing plant (NLCC).
    you have to asssign a customer master in the receiving plant shipping data and sales area details for your issuing plant.
    Reg,
    Deepak

  • No planning of Stock Transfer Orders

    Hi,
    I have business scenario in which we transfer the material from production plant to the sales Depot using Stock Transfer Order created manually. 
    We do not want include these Stock transfer orders in planning run.
    could any one reply on this.
    regards
    VS

    Hello AV,
    In the material master of that material (for the production plant where you run the MRP), select the MRP-4 view and in that for the field MRP Dependent Requirements, select the indicator1(Materials for dependent requirements are not planned). This solution i am giving by considering that you are creating the Stock transfer order in Depots and running the MRP in production plant.
    Please check and confirm.
    Regards,
    Jitendra chauhan.

  • FM or BAPI for Create/cancel  stock transfer order invoice

    FM or BAPI for Create/cancel  stock transfer order invoice
    Thanks and Regards,
    Srinivas P

    Hi,
    use BAPI_PO_CREATE, po_header-doc_type = 'UB'
    Thanks,
    Reward If Helpful.

  • Issues on cross-company stock transfer triggered by sales order

    Hi, friends:
      As our business process required, we need to make the cross-company sale between to plants under two company codes.
      The business process required is different from standard inter-company billing in SAP SD module. Our business process is as follows:
       sales order --> PR --> PO --> cross-company stock transfer --> delivery to customer --> billing.
      However, there is a difficulty in this process of make-to-stock production method. When we use schedule line item in SO to trigger the PO, there is a must to assign "account assignment category" in PO. This indicator is unchangable in PO by manual. When post goods recepit against the PO, there is no stock quantity udpate in un-restricted stock. By the way,  I selected "C" in the "account assignment category" of schedule line item cofiguration.
      Checked the MM documents, I found it seemed like only two results of PGR against PO with account assignment category. One result of PGR is directly consumpted by receiptent or unloading point. The other result of PGR is updating sepecial stock. For example, I've fullfilled the process for make-to-order production method, the stocks are specified for sales order.
      In our requiremnt, we have to post to normal un-restricted stock for the following ATP in sales order.
      Could any friend give some suggestion on this issue?
      Thanks!
    Justin

    Hi, Venkadesh:
      I've checked the Purchasing view and quantity/value update in both plants of different company codes. That's correctly configured.
      In the business process, the quantity in normal un-restricted stock updating still doesn't work.
      Do you mean that as follows: if select any indicator in  "account assignment category", we have to use UNBW or NLAG material type in the purchase order?
      I have successfully fullfilled the process in make-to-order sales order, with material type FERT and account assignment category "E". The account assignmnet categroy is obligatory in sales order schedlue line item configuration, which is to trigger PO by SO. The configuration path is as below:
      IMG>Sales and Distribution>Sales>Sales Documents>Schedule Lines-->Define Schedule Line Categories
      If possible, would make a test in your system to check how to fullfill the process with make-to-stock sales order, FERT material?
      Thanks!
    Justin

  • Cross Company Stock Transfer- Please check excise base for the item is zero

    Hi,
    My scenario is Cross company Stock transfer (Two different Company Codes)
    I have done following steps :
    1.Create Purchase Order
    2.Create Outbound Delivery for Purchase Order
    3.Post Goods Issue for Delivery
    4.Creating Billing Document
    5.Creating Excise Invoice
    6.Printing of Excise Invoice
    7.Post Goods Receipt for Stock Transport Order
    Till MIGO there is no problem.
    I am getting a errro while doing MIGO with reference to Outbound Delivery, when I enter Excise Invoice created in sending plant, I am getting error as
    "Please check excise base for the item is zero" - Message no. 4F121
    Excise Duty values are flowing as per the excise invoice but system make base value as 0 , I have maintained Assesable value in J1ID also. We are using TAXINN.
    Pl. help
    Thanks
    Vikas

    Hi
    The best way to slolve this problem, Now is to maintain Assable value in Material Master For reciving Plant.
    Hear you can maintain all the chapter id, register A or C, etc
    and then try doing GR,
    The other way and the permanent solution is
    VPRS or equivalent
    Condition class B Prices
    Calculat.type C Quantity
    Condit.category  H
    Cond.control H Condition value fixed
    Condit.origin A Automatic pricing
    In this Condition category is most important and by this only system copies the base amount for excise duty calculation in MIGO or J1IEX.
    Regs
    Niti Narayan

  • Return back the stock in a cross company stock transfer environment

    Hi all,
    I have a question in reagrds to Standard SAP Stock transport order with SD and billing (i.e. cross company stock transfer)
    For example:
    Ordering plant (issue Stock transport PO)----
    > Supplying plant (create DO) -
    > Supplying Plant (PGI) -
    > Ordering Plant (GR) -
    > Supplying Plant (billing) -
    > Ordering plant (invoice verification)
    Now my question is...
    if the ordering plant want to return the stock back to the supplying plant due to some business reason, what does ordering and supplying need to do?
    Can the supplying plant now issue a stock transport PO to the ordering plant to buy back (i.e. get back) the stock? is this the right away? and if not what is the right way so that the financial posting can correctly take  place.
    regards
    YY

    Hi Buddy
    Please refer OSS note 430074
    Regards
    Yogesh

  • Billing pirce in the cross-company stock transfer

    Hi,
       We went to use the cross-company stock transfer to move our stock from one company to another, as we know price of the Intercompany billing copy from condition table.but we went the price copy from the transfer order(PO),How to do it?
    Lance

    Dear Lance,
    Go to copy controls of Billing doc., choose Tgt doc type and Source doc type, click on 'Item' in tree and choose "details", there u'll find a field by "Price Source" and can put that as "A" (PO). Hope this answers your question.
    Reward if it helps
    Samier Danish

  • How to control the goods receive in Cross-Company Stock Transfer process?

    Hi,
    we use the standard Cross-Company Stock Transfer process to transfer goods between company, we have a issue, for  example transfer order quantity(po) is 10 pc, devlivery order quantity is also 10 pc,but only issue 5pc.and then we use mb01 to receive goods.It can receive 10 pc!? is there anything wrong with my configuration?
    Regards,
    lance

    Hi,
    Can you explain WHY Cross-Company STO's can still be received by referencing the PO even if this has not been Goods Issued? 
    It has also occurred in our set up that the PO qty is 1000, GI was only 500, GR is also 500, but the remaining 500 can still be received even if it wasn't issued (referencing the PO).
    Regards,
    Lee

  • Difference between Sales Order and Stock Transfer Order(STO)

    Hi Gurus,
    What exactly is a diference between Sales Order and STO?
    Thanks and Regards
    Rohit

    Hi,
    Sales Order Stock
    Sales Order Stock are stock with Special Stock type E. It can fall into the usual stock categories such as unrestricted, blocked etc. but "belongs" to a sales order.  For example, you create a sales order for a part and assign a sales item category that generates an individual requisition, the requirement has an account assignment linking it to the sales order schedule line, you convert that requisition to a Purchase Order.
    When you receive the Purchase Order, the stock is placed in sales order stock. It will show against the sales order/sales order line. It can only be delivered against that sales order line. Any availability check etc for that material on any other sales order will not take it into account as it is not available except to the sales order line the stock is assigned to.
    Stock Transfer Order
    the cross company Stock Transport Orders can be done by:
    - Configure using transaction OMGN
    - Depending upon the sending and receiving plants, maintain sales organization and customer data in customizing.
    - Maintain the supplying plant as a vendor and attach the plant to the vendor in the Vendor Master.
    - Material type has to be HALB or HAWA.
    - Ensure that the company with sales Organization has a plant to take care of stocking.
    - The PO used is NB and not Stock Transfer PO.
       Configure SD for inter-company billing to enable picking up the pricing procedure for billing.
    - Carry Out delivery through process delivery due list and billing through process billing due list.
    Otherwise, You need  to configure your Stock Transport Order settings for your Cross-Company:
    Business Transaction to work.
    1. Customer No. for the Goods Receiving Plant - OMGN
    2. Availability Check- Checking Rule (if necessary) - OMGN
    3. Assign a Delivery Type for the Delivering Plant - OMGN (for Stock Transport Orders, NLCC)
    4. PO type (which i belive you have done) - OMGN
    5. Assign Vendor No. to the Supplying Plant (done) - VK02
    6. Assign Customer No. to the Purchasing Plant for the Inter-Compnay Invoice (but you need to assign this to the Sales Organization pre-assigned to the Purchasing Plant),
    IMG-SD-Billing-InterCompany Billing-Define Internal Customer No. by Sales Org
    ***and by the way for the Invoice to work between Cross-Compnay Plants, you need also to have a Sales Org for the Supplying Plant and a Pricing Determination Procedure.
    REgards,
    vineela

  • Cross-company stock transfer with delivery function!

    Dear friends:
          I have a problem to borther u,I create stock transfer order with type 'NB',and then create delivery by T-CODE:VL10B with reference to the transfer order,but the log show the following error message:
       1030000484 000010 Sales unit  is not valid for item 000010
       Diagnosis
        The sales unit is not allowed for the material in item
        000010.
    System Response
        The system does not allow further processing of this item.
    Procedure
        Check your entry.
        Select a sales unit which is defined for the material in the
        material master record. Normally the sales unit will be
        determined immediately from the master master record.
    I really don't know how to deal it.
    thanks.

    UOM is in which stocks of the material are managed. The system converts all the quantities you enter in other units of measure to the base unit of measure.
    In the material master [MM02] check as to what is the base unit of measurement in the Sales Org1 tab and Purchasing tab. It seems that both these would be different as the system is not able to convert the UOM from Purchsing unit to the sales unit.
    Next, click the button for 'Additional data' [CTRL+F6], tab Unit of measure and enter the conversion for the UOM.
    For more details refer to the link below.
    <a href="http://help.sap.com/saphelp_46c/helpdata/en/ff/516a6749d811d182b80000e829fbfe/frameset.htm">UOM Details</a>
    In the link, follow the path Material Master Records-Additional Data-Units of measure.
    Regards,
    Gauravjit.
    Reward points if the solution is helpful

  • Stock Transfer Order and Routes

    Hi,
    I would like have a good Delivery date in the Stock Transfer Order base on the Routes, actually the system takes the longer lead time between route and planned delivery date.
    If I do a stock transport order, I assume that the supplying plant has stock, so why the system consider the planned delivery time in Materiel Master.
    I juste want the system add the transit time base on the route in the delivery date.
    Thanks to help me.
    Joss

    Hi Josh,
    Sorry, the link given my be was wrong (not complete).
    I do not know whether these can solve your problem or not - but please have a look at them:
    http://help.sap.com/saphelp_46c/helpdata/en/35/b0e88d87a62488e10000009b38f9b7/frameset.htm
    (it is for scheduling in the issuing plant)
    http://help.sap.com/saphelp_46c/helpdata/en/dd/5607e7545a11d1a7020000e829fd11/frameset.htm
    BR
    Csaba

  • Error in Cross Company Stock Transfer

    Dear Experts,
           While creating billing document for cross company stock transfer, it is not taking the material basic price and freight value.it is showing value 0.00, what might be the mistake. how do i correct that. kindly let me know plz.
    Regards,
    Prasath

    hi,
    even after i mantained that, it is not taking. then i have tried to maintain manually in condition tab. there if i press f4 and chekced for that condtion type. the gross price condtion is not coming there. but it is there in the procedure. i cant able to solve this. kindly let me know any other solution plz.
    prasath

  • Table for  the PO Date and Stock Transfer Order Date of a material no

    Hello Everyone!
    I am having a requirement where I want both the Purchase Order Date and Stock Transfer Order Date of a perticular material no.
    On the basis of difference of these two dates I want to find out the period for which the material was present in supplying plant.
    I am not getting the table through which I can get these two dates for a material.
    Please help me out.
    Its urgent.

    hi,
    see these tables:
         EKKO – Purchase Order Header Table
         EKPO – Purchase Order Item  Table
         EKBE – PO History table.
    reward if its useful

Maybe you are looking for