Crossfade audio on two different tracks...

Is this possible? It must be. I have audio and sound effects on several tracks at occasionally want to cross fade them> Can't figure it ou! Thanks.

baba e wrote:
Well suppose I have a music track that I want to fade out gradually as some music comes in on one of the audio/video connected tracks.
Not sure if you understand exactly what "crossfade" means. But the control you're looking for is not going to found in using crossfades. It's in setting level keyframes, as suggested, using the pen tool.
baba e wrote:
How can I put a crossfade between tracks on different levels? Thanks!
Ah. You are using the term "level" to refer to the vertical position of the stacked tracks, Confused me.
Option-click on the audio track and you can adjust it separately from the video track. This isn't as intuitive as you might think and it can get frustrating. If you want perfectly independent control over the audio, unlink the tracks. Be careful that you don not shift the audio horizontally, unsyncing it. When you're done making your adjustments, relink the tracks.
bogiesan

Similar Messages

Premiere capturing same audio in two separate tracks

My sequence capture settings (using a Xena LS capture card) are for two audio channels.
Right now I'm recording only with one microphone and have only one track of audio.
But when I'm capturing that single track of audio, it's showing up on both of the audio tracks in the timeline (same audio on two separate tracks).
Is there a setting to change that?
I have the basic settings for two audio tracks just for when I use two mics on separate camera inputs.
But when I record only one track, I would expect it to show-up on only one track in the timeline.
Could this be purely a Xena issue, or is it the interface between PP and Xena?
Thanks!

Thanks! I haven't used Premiere for about five years, but I remember that it's the way I used to do it.
Same with the Velocity system I used inbetween.
The Xena CS4 plugins just came out, so I'm going to contact them about this issue.
I'll leave this thread open in case someone has the same problem and wants to post it.

Sync audio with two different video files to create split screen

I want to sync two different video files to a high quality audio file and create a split screen from there in Final Cut Pro X. Help please?

I'm following along at home, Tom, trying to make sense out of your instructions. (Editorially: This kind of operation is among the reasons I thoroughly loathe FCPX.) This would have been easy in FCP7. Perhaps it's actually the same amount of work (you are describing operations in FCPX I have not bothered to try yet—too scared) but it's far more direct the old way: Find sync points for all three files, stack them up in a timeline, nudge till precisely matched, apply effects.
But I'm glad you're here to help us through this stuff!

Swiping on two different tracks

I recorded the same acoustic guitar part on 2 different tracks with 5 takes on each one. I have not been able to swipe so that I can use part of 1 track and part of the other one. What am I doing that is wrong? Thanks in advance for responding.
Larry Cantwell

Hi Larry,
I believe you need to group the two tracks. Assign them to the same group, and in the group settings, make sure that editing is enabled.
This is how how to handle swiping on multiple mic'd sources like stereo acoustic gtr, or a multi-mic'd drum kit, for instance

How do i sync the tempos for two different tracks playing at the same time?

i am new to audition so i apologize if there is an easy answer to this question, but...
i upload two different two different songs and i want to get them to play at the same time and sound halfway decent. how do i get the tempos to match?

http://www.adobeforums.com/webx/.2cccd873/0

Audio from two different slides plays at same time

I have created a project in Adobe captivate 5 and in the audio on the actual project, I only have one audio. When I go to publish or preview, it plays the audio of a slide that I am on and another slide. What is going on here?! I have tried everything and all the settings, please help!

Hello,
Can you please tell me the following?
1. Does the project have any background audio?
2. Have you inserted different audio files on different slides or distributed a single audio file on different slides?
Thanks,
Sagarika

Audio Levels on different tracks-How do I adjust them

I have a series of inteviews on my edirol which come across fine into ST. I've moved into production and have recorded some fixes and patches to complete the interview. These were done directly into ST using a mic. This is where the problem occurs, I can't seem to find where to adjust the audio levels for the new tracks I recorded. Having read through the ST doco, its brevity is to be admired. Help, any help appreciated.
I'm new to the sound field, currently studying journalism and audio is part of the brief.
regards, Wayne

Hi WayneAu,
1- In the audio tracks section, click the 'envelopes disclosure triangle'
2- In the 'volume envelope' portion of the track (it looks purple) double-click on the dark line. This adds a keyframe.
By clicking and dragging a keyframe you can adjust the volume for specific portions of the track, perform fade-ups or fade-downs, etc,.
I hope this helps.
In Solidarity,
Alain
http://www.crazyredacesproductions.blogspot.com/

Hi, with mix16 pro app, can anyone tell me when you set different audio levels for different tracks, does the app remember the level set the next time you use it? Or does it default to the original setting when you power down after a show? Thanks!

Hi
I use backing tracks for some songs with a live band and we are having some issues with levels. Some are higher than others etc. I use i pad to run the tracks. I am looking for an app that where I can control the levels better. Ideally, an app where I can set the level of each track to a desired level and leave it at that level for good. Mix16 Pro seems to do that but I wonder does it save the setting as I do not want to set the levels every time I use it.
Thanks

Hi
I use backing tracks for some songs with a live band and we are having some issues with levels. Some are higher than others etc. I use i pad to run the tracks. I am looking for an app that where I can control the levels better. Ideally, an app where I can set the level of each track to a desired level and leave it at that level for good. Mix16 Pro seems to do that but I wonder does it save the setting as I do not want to set the levels every time I use it.
Thanks

Viewing two matrix editor windows for two different tracks

I would like to work on multiple tracks at the same time using the matrix editor. I can only create multiple matix editor windows of the same track. An answer to this question would be very helpful.
G5 Mac OS X (10.3.9)

Hey Thomas,
I don't know, as you experienced, every time you jump from one track to another the matrix window updates.
I guess you have to deal with that.
Anyway if I read that it could be done I'll post you back.
Regards,
Jorge

Mirror the same audio over two different outputs

Hi,
I've got a MacMini (late 2009, running Lion) set up in my living room and connected to my HDTV. The audio goes to my amp via the built in digitial audio out and toslink cable.
I recently added a second TV in my bedroom and connected it via the mini display port and a HDMI cable. Unfortunately this version of Mini does not support audio over mini display port so i bought a separate USB audio card. This is connected via a Jack plug to my audio in on my bedoom TV (no amp here, non-digital stereo audio).
I would like to be able to have video and audio in both rooms at the same time. Video is working very well, but the audio does'nt come along. I can only set the audio to one output. I tried to make an Aggregate device, but still the audio sounds over one output. I tried this with both stereo audio (music) and with 5.1 audio.
Offcourse I googled and found that an aggregate device is used for creating multiple channels for audio, not for mirroring.
What i'm looking for, is some kind of setting or software(i hope) that can mirror my audio to both outputs, and if nessecary, format into the right source (5.1 for the toslink and 2.0 for the USB device). Ofcourse, everything needs to be in sync with video and eachother.
Is there such a thing?
Thanks for any help offered.

1) Don't know why this is happening. It may have something to do with
I downloaded from iCloud the same library I was working with
I'm not clear what procedure you're using here. Using a cloud for storage might change some file tags. Generally users I think keep the library on the same drive as the media, keeping the library backups on the system. There is no real benefit in keeping the media in a separate location. Often users will keep the library in the same folder as the media. It makes backing up using tools like Carbon Copy Cloner very efficient.
1a) This can be difficult to find as there sometimes is no obvious indicator. It might be a missing element in a compound clip, a missing or altered layer in a graphics file, a missing font, a missing effect. These will show up inside the item involved, but may not be apparent in the browser. A missing transition for instance will not be seen until you skim over the project or try to export it.
2) The 43 MB is a small amount of optimized media. This never prevents relinking. The library is always looking for original media, or proxy media if you're in proxy playback. It never looks for optimized media. If it has it, it uses it, if it doesn't, it uses the original media. If you are using original/optimized playback, you must have the original files. The optimized files are not enough.

Is it possible to add two different audio tracks to a clip which can be selected separately in the final clip?

I'm trying to edit a short clip with two different audio tracks (audio in two different languages). The tracks are not supposed to overlap but rather should be able to be selected individually in the final clip. Do I need special software or is iMovie actually able to accomplish that?

I seriously doubt that this is possible. I think when you get this kind of option on a DVD, the audio and video streams are encoded separately and you run the language of your choice by choosing it from a menu.

When clicking an audio clip on the timeline in Premiere Pro CC 2014, it duplicates it on a different track and makes it impossible to work.

I'm experiencing a disturbing issue as it actually prevents me to do the work in Premiere. I will put as much info as possible:
1) Project started on a different computer (the editor), PC with Premiere Pro CC,
2) Now opened on my Imac with Premiere Pro CC 2014,
3) I am not editing, simply trying to move audio clips on different tracks to export audio tracks only,
THE ISSUE:
1) Here is my timeline:
2) When I select an audio clip to highlight it, Premiere creates a duplicate on a different track:
Note that the clip highlighted in the previous screen cap is the duplicate and I didn't click it, Premiere highlights it as soon as it is duplicated.
3) When I click out of the timeline or scroll up or down on the timeline, the duplicates disappear. However, when I try to move the original clips, it doesn't do anything, they are stuck in place.
ANTICIPATED ANSWERS:
1) You work on 2 different computers with 2 different versions of Premiere Pro CC, what do you expect? --> The amazing thing about Adobe CC is that it shouldn't be an issue and now I have to deal with it in this way,
2) Try and save an updated version of your project from your computer. --> Already done that.
Thank you for your help. I usually use the customer support chat but I am on the other side of the globe and it is now closed. This issue prevents me to work so I need to solve it quickly.
Kind regards,
Aurelien

This sounds to me like it could be a graphics related problem are you on the latest driver. Something else you could try, start a new project and import the one from the PC into that rather than directly opening it in the MAC

Play two different sounds at same time from Split Keyboard?

Is it possible to configure the Logic Environment so that one can play or record, from a split keyboard, two different EX24/Audio Instrument sounds on two different tracks AT THE SAME TIME... (and/or: combinations of Audioinstrument + Midi)
EG: From C3 down the left hand plays an EX24 bass sound and from C3 upwards the right hand plays an EVP 88 Rhodes sound
Case 1: with the same keyboard
Case 2: play the second sound from another keyboard.
and/or: combinations of Audioinstrument + Midi
Some years back I tried this on a live gig with an iBook and MOTU 828 mixing the EVP88 but was frustrated that I could only access one sound at a time.
Any ideas appreciated..
Adam

Yes, there are lots of posts that document this in detail, including several from myself.
Do some searches and you should turn them up.
If you suck at searching and can't find them, post back and I'll search for you.
In short, you either need to do some post Physical Input environment cabling, and/or use Logic's multirecord facility, which is documented in the manual.

Can you play two different MIDI instruments at the same time in Garageband?

Hi all,
I searched for a while but failed to find an answer so far: can Garageband allow you to play two tracks with two different midi instruments? When I plug my two keyboards, the 2 MIDI sources are recognized, but can only play notes on one track, not two different tracks! Is this a known limitation?
If Garageband can't play 2 midi instruments on 2 different tracks, I guess that leaves me with Logic Express...
Thanks a lot for any reply!
Alex

Correct. GB doesn't differentiate between midi channels, that's why you can't split them to two tracks (and GB only offers one recording channel for midi at a time).

Two mono tracks

I think I may have a blind spot, but here goes...
I'm attempting to export an audio clip into Soundtrack Pro, but am unable to because I either recorded/captured the audio as two mono tracks (L & R). Is there a solution to editing the audio in STP, such as creating a stereo track? I'm not especially proficient in sound editing (as my post suggests), but I'm assisting on a project that needs the noise reduction feature in STP badly, and due to the track settings.
Suggestions, comments?

hi there,
Select your clip in the sequence and hit alt+l.
Then you can use the sent to soundtrack pro function, wich you can find under File, sent to.
good luck!

Crossfade audio on two different tracks...

Similar Messages

Maybe you are looking for