Crossfading Music's sound when other application make a sound

I have a problem
when im listening to a music with KMPLAYER or WMP & After that other application like viber make a sound , music's sound fade out for a second and fade in again
this feature bother me
how can i disable it ?my sound driver is realtek

Hi,
I have no idea, but you'll get much better help asking in the Windows forums here:
http://answers.microsoft.com/en-us/windows
This forum is meant for suggestions and feedback on the MSDN/TechNet forums, not product support.
Good luck.
Don't retire TechNet! -
(Don't give up yet - 12,830+ strong and growing)

Similar Messages

Application makes a sound when clicking alt + any key

I have an EventListener that catches the key down and key up events to see if Alt is being pressed for certain hotkeys. I noticed when you hold down Alt + anykey the application makes a sound. I thought this may have been from what I had overwritten, but I opened an application that had nothing in it and hit alt + any key and it made the same sound. Where is this sound coming from and how can I remove it?

I don't think so. If I hit Alt + 1, while no AIR app is running it doesn't make the sound.
If I click Alt + 1, when any AIR app is running it makes the sound.

My iTunes has started skipping when other applications run

Songs are skipping/stuttering/static-filled when I open other applications, or do anything not in iTunes.. is this due to some virus maybe? Or is it an iTunes problem? Thanks in advance.

Howdy jackEVNorman,
It sounds like your iTunes playback is stopping when you switch to another program. I want to recommend starting iTunes in Safe Mode, and see if the symptoms persist.
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/kb/ts3430
If the issue is not resolved, I would try performing a Safe Boot on Mac OS X.
Mac OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/HT1564?viewlocale=en_US
To start up into Safe Mode (to Safe Boot), follow these steps.
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key.
The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple logo and the progress indicator (looks like a spinning gear).
After the logo appears, you should see a progress bar during startup. This indicates that your computer is performing a directory check as part of Safe Mode.
To leave Safe Mode, restart your computer without holding any keys during startup.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Facebook notification sound when close friend post dont sound

does iphone make a sound when a close friend post something like on android it lets u know

Ok so apparently they FIXED it!!
-Go to the facebook app on phone
-Go to Account Settings
-Go to Notifications
-Go to Mobile Push
-Look at the top of the screen and it said "Sound for push notifications"
-Edit it to ON for all notifications
They fixed it I now receive sounds for notifications!!!!!
Tell people that are having this issue please

Itunes 6.0.4 (3) update - wont play music + no sound on other applications

I have auto-update on and normally all the updates seem to be good... however I cant play any songs and therefore no sound from my speakers at all. All the music etc is there, press play and nothing... I had a look at Quicktime too and again no sound, I tried some of the home movies I have made on iMovie and no sound, same with Garage, no sound... The more I explore the worse it gets.
I see that others have had issues with this update. Other than trying to ininstall and go back to an earlier version which seems complicated has anyone else experienced these issues with particularly itunes not working and there being no sound?
Thanks
iMac G5 Mac OS X (10.4.6)

it says under Output "No output devices found", is that right?
No, that's definitely not right. It should recognize your built-in Audio.
Your internal speakers are obviously not recognized by Mac OS.
If at startup you hear the tone, the hardware does work.
I don't know a solution however.
You could post a question in one of the iMac G5 forums or one or one of the Tiger forums (click on the blue text links to go there).
Before you do that, you might want to check if System Profiler recognizes the hardware. It will give posters trying to answer your question some additional information.
The easiest way to launch SP is to go to the -menu and choose 'About this Mac'. Then click 'More Info...'.
Expand 'Hardware' by clicking on the little triangle and select 'Audio (built-in)'.
On the right all information about the audio hardware should appear.
You could of course also post your findings in this topic. Others, reading this topic might help you solve the problem, but my guess is, that posting in one of the iMac or Tiger forums is more appropriate.
There are several very knowledgeable people answering questions in those forums.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.4.6) Several ext. HD (backup and data)

When my iphone makes a sound it comes out distorted, why and how can I fix it?

Whenever my iphone makes any sort of sound (video, music, lock sound, ect) it sounds distorted and demon like? I know that sounds weird but thats the only way I can think of accuratly describing it.
It started doing that today and idk, I didn't drop it or anything either.
Why is it doing this?
and
How can I fix it?

Reset, hold both home and power buttons for about 10 seconds until the iPhone restarts itself. See if better. If not, Restore iPhone with iTunes on computer. See if better. If not, and if there is Warranty or AppleCare Coverage take or send to Apple for resolution.

Use garage band sounds in other applications?

I've never had any need to use Garage Band, but have heard that the sounds are good... is there a way to use Garage Band sounds with a DAW, specifically, Digital Performer?
Thanks

What do you men with sounds?
Apple Loops
Apple Loops are just aiff file with additional metadata. You can even play them in iTunes. However I heard that DP can utilize the Tempo Match and Key Match feature.
Plugins
GarageBand support two Plugin standards. AU Plugins and Logic-Plugins. GarageBand doesn't come with any AU-Plugins only Logic Plugins but DP doesnt support them, they are an Apple proprietary format.
Drummer
The drummer is nothing other than a sophisticated EXS24 Sampler (a Logic Plugin), therfore no support in DP. If you have a lot of time on your hand, you can access the individual audio samples and build your own sampler that can be used in DP.
Settings
All the other sound settings are just settings files that are only compatible inside the Apple ecosystem of audio apps (GarageBand, Logic, MainStage)
This ecosystem comes in handy when moving between those apps. Now you can create sounds and settings in Logic and use them in GarageBand or MainStage. Here is screenshot from my new GarageBand book "GarageBand X - How it Works" that illustrates that ecosystem
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

HT201263 after updating screen remains black, wont turn on , when pluged in makes beep sound only

tried restore but still screen is black

Make an appointment at your local apple store and have them take a look at it.

I don't have sound when I call, and no sound when I am playing a video

I had a call with facetime, and the sound stopped on a moment and nevr came back.
I've restored with iTunes without any result. When I am playing music or video or placing a call, the person at the other side heares me butt I hear notting.
Anywhone got this problem??
Thx

Here's a link to convert a ripped dvd.
http://www.ilounge.com/index.php/articles/comments/video-to-ipod-conversion-for- windows-pcs-parts-2-3/
It also allows you to download the neccesary software, which is Videora.
If you need help with ripping the dvd, tell me.
-Taps-

Apple TV has no sound when mirroring from Mac mini,sound works when mirroring from iPad and iPhone

When I mirror from Mac mini to Apple TV there's no audio from Apple TV to my av amp,it works fine from iPhone and iPad,is there something I need to do in the airplay settings?

Here's what finally solved my issue:
https://discussions.apple.com/message/24436903#24436903
From this Apple Community User:
https://discussions.apple.com/people/Winston%20Churchill
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Reset the Apple TV (Settings > General > Reset > Reset all settings)
Restore the Apple TV (Settings > General > Reset > Restore)
Apparently there is an issue if you push the Apple Remote before you set your computer to mirror. Whatever I did, it had locked it in that state. Once I stopped mirroring, then went onto the TV screen and restarted the Apple TV (#1 above) it then allowed me to choose mirroring on my Mac and the audio automatically switched from the computer to the TV (making the computer now mute), BTW the volume needs to be maxed on the computer as that will transmit to the TV if your volume is low on the computer. Then you can raise or lower it the way you want on your TV.
Yay!
Hope this helps others.....

No sound when on Facebook app. Sound ok when using I pad otherwise

How can I get the audio to work when using Facebook app? The audio is ok when using the iPad otherwise. I already tried to fix by deleting the app and reinstalling also tried to reboot. No luck. Please help. I had been using Facebook previously without any problem.

Hi,
Try a clean installation of the flash plugin/activeX as follows.
First, download the Flash uninstall utility on the link below and save it to your Downloads folder.
Flash Player Uninstaller.
When the download has completed, close all browser windows, open your Download folder and run the uninstaller. After this has completed, restart the notebook.
When windows has reloaded, download and install the latest version of Adobe Flash. Note: You may want to deselect the option to include McAfee Security Scan Plus before downloading.
When the installation has completed, restart the notebook again nefore checking if you now have audio on the internet.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How many ALSA applications can play sound at once?

I ran into a strange issue where I had Counter-Strike:GO running (sound working fine in the game itself) but when I alt-tabbed, no other application could play sound. VLC would complain my device was busy and Chromium didn't show an error but sound didn't work either (tested with a YouTube video.) I was able to solve this by changing the audio setting in CS:GO from 5.1 surround to 2 speaker (I use headphones so no need for surround) so now I can alt-tab and still have sound in other applications.
What I want to know now is why that is? Is there a limit to the number of simultaneous channels or what? I just tested and with CS:GO set to 2 channel I can play sound from CS:GO, Chromium, VLC, and Banshee all at the same time but with 5.1 CS:GO hogs the sound card all to itself.
I'm also curious about where PulseAudio fits into this. Right now I'm just using pure ALSA. If I were to get a surround setup one day would PulseAudio overcome this limitation and allow me to play music while I game?

See list of gotchas.
The main issue you probably have is that Dmix doesn't work with more than stereo - *unless* you use something like my sample config.
ALSA is flexible, which means it will allow naughty apps to block the soundcard for other apps. So, configure your apps also.
ALSA works fine, no need for pulseaudio.

Qosimo G20-127: no sound when watch TV in MCE

my notebook is Qosimo G20-127. I have a problem. There is no sound on tv. There is picture but no sound. Windows media center is operating system. Everything under MCE works ok and there is sound under other applications but not when i watch tv.
please help

Hi
I would also recommend checking the Sigmatel audio, sound and audio devices and the virtual sound options.
I can't say which option should be changed but you should check these functions.
Furthermore this could happen if you have connected the notebook to the TV with a s-video cable.
This kind of cable supports only video signal and not audio.
To receive the sound on the TV it's necessary to use additional RCA cable (red: sound right channel /white: sound left channel).
You have to connect additional the audio RCA cable (red/white connectors) to the R/L audio input on your television and the black connector to the headphone jack on your notebook.
Message was edited by: Jayjay

Need advice for an application that restricts access to other applications using a smart card

Hello everybody,
I am developing a system that uses a smart card reader attached to a USB port of a PC.
What the system should provide is:
When computer boots up and shows the users login screen, a user, previously registered, can use his smart card to access the system, instead of entering his password
Once the user is logged in, when he tries to launch an application, which has previously marked as "secured", a dialog box is shown indicating that the user has to present his smart card. If the smart card has access to the application, the application
is launched, otherwise an error message is shown to the user and the application is not executed.
I develop in C++ and C#. I have already created a library (in Visual C++) that manages the smart card reader and provides the card presented to it.
Now I am developing the applicastion (in C#) that will configure the security (assigning cards to users and applications).
Concerning this, I have 2 questions regarding each point above:
Is it possible to create the centralized application that lists all users and allows to assign cards to them? Then, when the users login screen is shown, the system must access that data before logging in, so that it can check which card was presented and
what user it corresponds to. I have seen in laptops, that have embedded fingerprint readers, a user must login to his account first and then he can register his fingerprints. In fact, what I need to do is something similar but with smart card reader instead
of fingerprint reader. So, perhaps, user must login into his account first and then he will be able to add his card and store that information somewhere (in windows registry maybe).
How can I launch my application when other application is executed but before its interface is actually shown? this is similar to what antivirus programs do, because they check the executable before it is actually ran. What is the best method to address
the application? by executable file name? process name? or other? if the best is by process name, how can I know the process name without actually running the application?
Well, that is all what I need to do. Please advice regarding this subject.
I look forward to hearing from you,
Best regards,
Jaime
Powered by C++

> what was the guidance?
1. Research other software that does similar things (not just exactly the same) as you need. If you like something in their solutions, copy it :)
The only software I know that does that is an antivirus, but I am unlucky to find some code in c++ that allows to intercept the program execution before actually executing it.
2. If a kernel driver would fit in your solution, go for it (google for what is available for free, or find a consultant to write it for you).
There are a lot of information about kernel drivers, but the question is, is that really the solution?
Otherwise, you can just hide the application from user's reach and substitute the executable in shortcuts, etc. to run your program instead.
Definetly this is not the way to go
What is the best method to address the application? by executable file name? process name? or other?
By executable file name, like in the Windows Applocker, I think. Processes do not have names (they are artifact of Task manager and debugging tools, to represent the processes for user somehow). Or, only by the filename part of the full path.
I agree with that
if the best is by process name, how can I know the process name without actually running the application?
When the user runs the application, the driver will detect this and do its magic.
I have found this page: http://stackoverflow.com/questions/3556048/how-to-detect-win32-process-creation-termination-in-c. They mention WMI, but I will study it tommorow... it is so late for today :-)
Regards,
-- pa
Regards
Jaime
Powered by C++

TS3297 no sound when viewing HD movie from iTunes via Apple TV?

Recently added AppleTV to the home theater (via HDML). Downloaded HD movie from iTunes, but there's no sound. Pretty picture, just no sound. Other AppleTV functions have sound (movie previews, Hulu), and viewing photos and listening to songs from MacBook work fine. Any suggestions?
AppleTV
MacBook (recent upgrade to Mountain Lion)

I turned off "Dolby Digital" - now it´s working!

Crossfading Music's sound when other application make a sound

Similar Messages

Maybe you are looking for