Crossgrade from FCP 4

I am trying to get some help, but no one at Apple can help me so far. I sent in my FCP 4 disks, check, and order form. The check cleared back on 12/12/06. I have a copy of the deposited check into an Apple BoA account. I haven't gotten my disks and no FCS 2 is out. Does anyone know who to contact that can actually resolve this issue for me, so I can get my crossgrade?

Call AppleCare.... fax them the copy of the paperwork you have... they'll fix you up I'll wager. 1-800-myapple
If they don't DEFINITELY post back... Enquiring minds want to know...
Also... FCS 2 isn't out yet... it's just being previewed... it's due to ship may 31... Nevertheless, you should get what you've paid for from Apple.
Jerry

Similar Messages

CrossGrade from FCP 3 to FCE 3.5?

Is it possible to crossgrade from FCP 3.0 to the new FCE 3.5? I've been using my old version of FCP from the pre-FCE days, and would only need to continue on using FCE on my new MacBookPro.
regards,
Michael.

Not acceptable that you can't cross grade Apple products.

Universal crossgrade update from FCP HD to FCP Studio on Mac Book Pro

Hi all,
Just ordered my universal upgrade for my MBP from Apple to go from FCP-HD to FCP Studio. My MBP has FCPHD installed on it. I installed it without being aware that it was not compatable with the intel chip.
Just wondering if there are any problems associated with simpy installing the complete crossgrade FCP Studio without first uninstalling FCPHD.
Or is it suggested to completely uninstall FCPHD before installing the new universal version of FCP studio.
The answer may ship with the software but I was wondering if I should start going through the uninstall process as I hear it is a bit involved.
Thanks for any help.
Bob
[email protected]
macbook pro 17" Mac OS X (10.4)

When I attempt to install the 5.1 cross-grade on a newly formatted hard drive, that is also set as the boot drive with the latest version of OSX on my dual G5, the 5.1 install goes through the entire process up until I get to the part where it begins actually installing the actual software applications. Then it fails--quits- completely quits installing. And yes, both of my optical disk drives are working. I have another disk drive that contains the last version of Final Cut Studio and when I first tried to install the cross-grade on that drive it wont even get past the screen that says that the software is checking to see if it can be installed on the drive. I was told by someone at Apple Pro Applications support that if 5.1 would not install on a new formatted hard drive that contained nothing but the latest version of OSX that I had bad install disks. It's a matter of getting them replaced. I KEEP GETTING THE RUN AROUND!!! It's like no one at Apple cares. I wait over two hours to get help, but I really am not getting help. When I call Panasonic for help with my AJ-HD27H VariCam Camcorders, or my a Aj-HD1200 decks, they bend over backwards to help me. Or when I have a problem with a Canopus Editing System help is easy and reliable.
Is there anyone who knows from whom I can go for an easy replacement of these instal disks?????
G5 Dual 2.7 Mac OS X (10.4.8) aja kona 2 7gig Ram x800 Vid

Unable to output from FCP to Canon XL1.

I have an eMac with Final Cut Pro 4.5 HD. I also have a Canon XL1 3 CCD camcorder.
I have no problem capturing footage from my camcorder to my eMac on FCP. I can also connect my Canon to my VCR and record off my camcorder to my TV, as well as play the tape on my camcorder to watch it on TV.
However, I cannot output from FCP to my camcorder. The 4 to 6 FireWire is attached to both the camera and the eMac and I checked the Log and Capture feature and FCP does recognize a camera or deck is attached. I've been trying to output it using manual record in which I press record on my camcorder and play the playhead on FCP. As I record, there is no picture on my viewfinder, nor any audio being recorded and when I play it back, I just get this blank blue screen, but the timecode is recorded.
Am I missing something here?

ensure the following are set
View>Video Playback>Firewire Apple 720x480 (NTSC or PAL - whatever is appropriate)
View>Audio Playback>Audio follows video
View>External Video>All Frames
If this isn't what you are set to do, you won't be sending video out to your recorder.
x

I need to output a PAL HDV project from FCP as a PAL DV file with 4 audio t

I need to output a PAL HDV project from FCP as a PAL DV file with 4 audio tracks - specifically one stereo pair to be t1&t3, the other stereo pair to be t2&t4. This is the standard way requested by an international distributor of tv programmes. I understand how to set the sequence in FCP to output 4 audio tracks - either 2 stereo pairs (1&2, + 3&4), or 4 discrete tracks. But how do I then output this as a QT file?
The manual tells me that to export multiple audio tracks, File>Export>QT Movie has it's Config pop-up menu in the Audio Settings area of the General tab of the Sequence Settings. Well, that's set for 4 discrete channels, but the QT export settings only allow for 2 mono or 1 stereo output, and that's what I get when I try it. What it says in the manual just doesn't happen.
Exporting via Compressor, on the other hand, has an abundance of choices of 4-track outputs, none of which are labelled as anything resembling 'discrete'. Would any of those 4.0 settings suffice? Or am I likely to get myself into difficulties further down the line? As I am monitoring for this task on a 2-track audio system, I cannot confirm exactly what I am getting when I use any of those settings.
Any advice would be greatly appreciated!
John

Call me naive, but I've not heard of splitting the stereo pairs like this before.
What broadcaster? (perhaps one of our EU regulars will drop in...)
You can do all sorts of pairing but it is coincident tracks pairing- eg 1/2 + 3/4
Sorry I can't offer anything.
x

Sony EX XDCAM from FCP MAC cannot be recognized by PC

Not sure if this is a quick fix, but my CGI guy - who works by remote - cannot get his PC to recognize my XDCAM EX 108024p clips from my MAC - which I have exported as MXFs using the SONY XDCAM export option in Export>using qt conversion. I sent him the link to the driver, and he said it installed fine - but still his computer was not recognizing the MXF file. Does he need a program to convert?
Basically, I am looking for a lossless way to give him my Sony EX1 files that he can work with on his PC (in studio max) and then export to a lossless format that I don't have to render in FCP.
Any tips or suggestions most welcome. This is my first time editing a program with EX 1 files in FCP.

I'm using the Sony XDCAM transfer 2.5.1 to bring in the clips from card into FCP. The clip browser I downloaded yesterday and I tried to get it to recognize an MXF file that I had exported from FCP using the sony xdcam plug-in (but it did not). I guess I can only use the MP4s to convert to MXF? Is there a difference going from FCP compared to Clip Browser? I want to be able to export cut sequences so that the CGI guy can composite...
Message was edited by: thecuz

Aspect Ratio wrong in sequence imported from FCP

I'm a reasonably experienced user of Final Cut who intends now to migrate to Premiere (leaving the sinking ship?) So, at present, I'm trying to import current projects from FCP into Premiere using XML.
The result for a large scale and pretty advanced project was disasterous losses, so I've decided to start with a much smaller project, which contains a single sequence in the same format as the media, 20 or so HDV 1080p25 clips, and a handful of wav sound files. The result is better, but there are two problems I've encountered:
1. When I open the sequence in the timeline the aspect ratio, which should be 16:9 is squashed in to something more like 4:3. Opening a clip from the bin in the source monitor does not have this effect, but I can't work out how to rectify the change of aspect ratio when the sequence is playing in the program monitor. - Any tips?
2. The audio file icons in the project imported into Premiere are unlinked. When I try reconnecting them, Premiere says it can't because of a 'header error'. - Any clues to what this means and why it should be?
Thanks.

Hello Jim Simon,
Yes, I've tried importing one of these wav files into a new project, but it Premiere won't allow me to. It comes up with a message saying:
"The file cannot be opened because of a header error".
Any ideas?
PS. As this was a side issue to my main query, and the title of this thread doesn't refer to it and hence might make it hard for others to find, I've added a new query to cover this under the title: "Header Error when importing Wav files"
Message was edited by: andrewcopper

Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

Exporting via Compressor may be recommended but it is slow and doesn't fully support all available filters, etc.
Try exporting the timeline as a QT Movie (the "normal" export) using Current Settings and them submit the resultant clip to Compression. Works for me...

My sequence will not show up in Color 1.5.3 when sent from FCP 7

I cannot get clips from FCP 7 to show up when sent to Color. I had been able to get this to work perfectly fine earlier, but now for some reason, when sending a sequence from FCP to Color, Color doesn't automatically create a new project with the sequence in it. I've Googled for answers as much as I can, but cannot figure out what's going wrong.
By the way, the footage is from a Canon 7D, imported into FCP from PluralEyes 8.
EDIT: I've tried to manually export the XML from Final Cut into Color. Color will not even recognize the exported XML file. I've done what others have suggested online and deleted my Color & FCP preferences files out of my User/Library. I've created new FCP projects and tried to send to color from a new project. None of these have helped at all.

I just had this exact same problem. Clips from my FCP 7 sequence would not show up when I sent them to Color 1.5. No way. No how.
I solved my problem (at least for now) by simply restarting my machine. I realized that it had been running for days, and it probably just needed a reboot. Try it. It might work.
And yes, I'm running Mountain Lion, too. 10.8.2.
Good luck! ----Todd Ruel

The Color doesn´t recognize the clips´time when I send from FCP to COLOR

I have a big problem. When I send from FCP to Color does not recognize the mounting clips. In each plane is everything and not the s 2 or 4 seconds it had in the assembly of the FCP.
I have worked with Color more times and have not had that problem.
Anyone can help me?. Can it be the codecs, the times of the FCP, the settings of COLOR?
Could you help me, please ?

subpaper clips.
What is a "subpaper clip"?
By the way, all this nonsense about COLOR only supporting one layer of video... where is this coming from? This is utterly untrue... I am thinking of Stevie Wonder's song that states that when people believe in things they don't understand, that's superstition.
Rather than try to explain all the things that COLOR cannot do, maybe it would be easier to lay out the basic concept of what should be sent.
Very fundamentally, COLOR is a sequential-file (.dpx) color correction or grading application that has been modified to work with a few Quicktime codecs, and can accept a single sequence of independent media (discrete clips) from Final Cut. That sequence can have many layers, but it cannot have any nested sequences, and there still are a number of editing strategies within Final Cut that can be proxied, albeit inexactly, but occasionally not at all.
The safest sequence to send to COLOR from Final Cut consists of independent Quicktime Clips, all of the same resolution, codec, and frame rate, which should match the sequence settings of the Final Cut project. There is a naive assumption that anything that can be done in Final Cut can be replicated in COLOR and returned intact. This is absolutely untrue, and the evidence of that is everywhere in this, and other forums.
In this particular instance, "zotero"'s problem, while lamentable, is of his own creation by ignoring or proceeding without any preparation or investigation, and assuming that every editor's concept of what passes for the creative process has been anticipated and compensated for by the application developers.
To mark them manually now when already I have the definitive assembly is a labor of many hours.
Unfortunately, that may be your fate. Alternatively, you may consider the use of a "Media Manage" operation which will re-organize the independency of the source media. The Media Manager is covered extensively in the Final Cut manual. I'd advise doing a lot of back-ups before proceeding with anything else at this point, because it really looks like there is going to be a lot of trial-and-error in the near future... mostly error. Good luck with it all.
jPo

Burning Blu-ray from FCP? Seems I've encountered a glitch.

Followed these instructions (Ken Stone):
http://www.kenstone.net/fcphomepage/burn_br_mac_superdrivestone.html
Only difference is instead of using SD disks as instructed in those guidelines, I'm using actual Blu-ray disks with an external Blu-ray burner. The external drive is turned on and plugged into my mac and I chose it as the burning device (meaning my mac recognizes the drive).
Well, the export process finished and it didn't prompt me to insert a blank disk for burning, but it left the Blu-ray and AC3 file in my desktop.
How can I take those files and now create a Blu-ray disk? Is that something I can do from FCP or Compressor? I'm kinda stumped.
Any help is appreciated!

Ha... yea, it was a total blonde moment on my part (I have blonde hair and I have the moments frequently... haha). BUT! The question still stands! Because the drive wasn't plugged in it didn't burn the DVD, it just saved the video and audio file to do so. So is it possible to get them back in somehow to burn the disk w/o having to go through the LONG export process again?
Fortunately, I guess because it didn't recognize the drive, FCP actually turned it into a disk image. I found that file this morning in my 'Movies' folder. I was then able to open Disk Utilities and burn it that way. I'm the proud new father of my first Blu-ray disk! Needless to say, the results are STUNNING. I'm totally blown away.
I'm gonna mark this as 'answered' because I found the disk image... but just for the heck of it... I'd still like to know if there's a way to get the BD file and AC3 back into Final Cut, should I not be so fortunate to get a disk image again in the future.

View Footage from FCP to Sony HDR-HC7 Camera

Hi all,
I have final cut pro and a Sony HDR-HC7 camera with a SAMSUNG external monitor. I'm trying to view edited video from FCP to my camera then through HDMI to my SAMSUNG external monitor. I can't get this to work.
This works fine through my DVDPRO deck then component to SAMSUNG external monitor.
Any ideas? Thanks in advance.
mdawg

Thanks for the answer.
Now I tried to link my iMac directly to my television (mini DVI to HDMI) to watch my movie, but I got no picture on my television. It is a Panasonic Viera, HD ready (TH-42PV60E). It has 2 HDMI inputs. Has anybody succeeded yet in doing this?

Wanto output video from FCP to tv-monitor..

I've been searching for an answere in this forum aswell as PD150 forums..
Please help, I think of myself as a logical person but just can't figure this one out.
I try to output the video signal from FCP to a tv-monitor usin a Sony PD150 in the middle.
That is; Firewire from my G4 into my camera, s-video to scart into my monitor.
I've been fiddeling with the camera settigs but found nothing that indicates signal in/out or likewise.
I know that this isn't a PD150 forum but i thought I could find someone experienced here.
Thanks for answeres in advanced, Erik

#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

Problem playing back HDV from FCP HD

FCP 5.0.4
I am doing my first HD project and am experiencing a problem I cannot solve.
Using both a Sony HDV HC1 and Sony HDR FX1 as playback devices, I cannot get the video to play back from FCP using HDV1080i60. Under Video playback, the options for the HDV are grayed out for the only firewire options:HDV(1440 x 1080) 30fps and 25fps. However, the option exists under Print To Video, and when chosen, will send HD1080i60p video to the cam>hi def monitor.
I have tried every possible setting on both cams to find a solution. Using DV NTSC I can get a work around. The cam's will both capture and control via FCP. Thanks for any advice.

No HDV decks will allow you to monitor external video from FCP through them UNLESS they are in the recording mode. So they just don't support this like DV devices do.
You need to look at a card for this. Least expensive would be the Intensity cards from Decklink. I like the MXO from Matrox too for this too... does more output, but has no input... I use an Io HD for that... and turn that slow rendering HDV to ProRes.. much faster rendering, and visually lossless.
Jerry

Whats the best way to import video clips from FCP into a personal template

Hey all, I'm doing some tests. I see some color shifting going on when I export out of FCP using QT conversion (same settings as sequence), Importing into Motion, then adding lower third graphics, then exporting out of Motion .... and finally back to FCP. I put the new graphic added layer on top and have the original on bottom. I toggle the monitor on both layers and see a slight saturation drop on the graphic layer. Has anyone noticed that ?
The reason Im doing this is because lets say I have lower thirds that I want to place throughout a hour show. I want to set-up a basic lower third template and just plug in the video clips for the areas that I need those graphics. It would be way to difficult to export out of the timeline in FCP
and rebuild those lower thirds everytime in Motion. Does anyone know of a better way or does everyone have to export out to the desktop and then into Motion every time they want to use a Motion template.
Thanks to any replies.

Try roundtripping from FCP to Motion and back using Send to Motion. In FCP, Control Click your clip>Send To>Motion Project. The clip will open in Motion with the proper project properties. Make your edits there, press Save, and then render back in FCP. No exporting necessary, although you might see a gamma shift. Much easier.
To do this with an existing Motion template, I'd try copying and pasting in that template's contents once you've sent to Motion from FCP.

Crossgrade from FCP 4

Similar Messages

Maybe you are looking for