Crosshatch effect instead of shade in EPS for PageMaker

I'm using CS2 on OS 10.5.2 and PageMaker 6.5 on Vista.
Unless I save my CS2 files as Illustrator 8 EPS, I can't use them in PageMaker. When I place these files in PageMaker, I get a crosshatch effect instead of a shade, both visually and in print, unless the color is black.
I've tried quite a few different ways of working with the Illustrator file and have come up with interesting results. I found that when I created a Word document on the Mac and dragged the Illustrator file, or a png created from it, or wmf as export from it, I got the Illustrator file as I'd expect it to be: shades of different colors. When I used the eps file, I got the crosshatch effect, and this was using the default eps CS2 settings, not saving as Illustrator 8.
There's probably an easy solution for this and hope someone here will have it. I also would like to understand what's actually happening, so if there's something I could read on the topic, I'd like to.
Thanks for any help.

Sounds like you don't have a PostScript printer. I think PageMaker can render AI and EPS files up to version , or maybe 10.

Similar Messages

  • Can i use an alternate email instead of an apple ID for iMessage?

    can I use an alternate email instead of an apple ID for iMessage?

    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support

  • How can I assign a period (instead of B) in Keynote for blank screen so I can use a Logitech R800 presenter? An option in next version?

    I have recently bought a Logitech R800 presenter which works very well with Keynote on a MacBook Pro. The start/stop presentation key does not work but that can be easily fixed by assigning F5 to "Start presentation" for Keynote in the keyboard system preferences. The remaining issue is that the blank screen button sends a period (".") which works as a prompt for a blank screen in PowerPoint, but in Keynote it causes the slideshow to end. Keynote uses the letter "B" for blank screen.
    How can I assign a period (instead of B) in Keynote for blank screen? Some sort of work around would be very useful as I often use blank screen in my presentations and much prefer Keynote to PowerPoint.
    Perhaps it will be an option in next version of Keynote?
    Thanks

    As far as I know you can not change these keystrokes without changing the Program files. I am sure it is possible there, but I have no idea where to even start to tell you where to find it.
    Your best bet it to go to the Keynote Menu>Provide Keynote Feedback and let Apple know you would like the option to change them.

  • Show key instead of text in ME51N for PR document type

    Hi, did anyone know how to show key instead of text in ME51N for PR document type? How can I remain the setting after shut down the PC?
    Thanks.

    Can you give more info about your need as it is not clear which text you're referring to.
    Regards,
    Vivek

  • Is it possible to be invoiced by Adove instead of signing up(subscribing) for Adobe FormsCentral with a credit card?

    Is it possible to be invoiced by Adove instead of signing up(subscribing) for Adobe FormsCentral with a credit card?

    No, currently we only allow for direct credit card billing of paid accounts. We don't offer any invoicing service for this product.
    Andrew

  • ICloud symbol in settings does not appear, instead there is the one for MobileMe, what do I have to do or didn't do well?

    iCloud symbol in settings does not appear, instead there is the one for MobileMe, what do I have to do or didn't do well?
    Thanks in advance

    If your Mac is one year old it did not come with Lion, so you must have purchased and installed it yourself, or it is not installed.
    Do this
    Go to Apple Menu>About This Mac:
    It should look like this:
    If your version is anything other than 10.7.xx you do not have Lion (10.6 is Snow Leopard)

  • Display Yes / No instead of True or false for radio buttons in SSRS 2008R2

    Hi All,
    I have one report with two radio buttons as parameters. In the report display I see True / false beside the radio buttons. Is there a way where I can display it as
    YES instead of True and NO for False beside radio buttons?
    Thanks,
    RH
    sql

    Hi sql9,
    According to your description, you want to show "Yes" and "No" in Boolean parameter instead of "True" and "False". Right?
    In Reporting Services, it doesn't has any property for the text of radio button in a Boolean parameter. So we can't modify the "True" and "False" into "Yes" and "No". For your requirement, a workaround is changing the type into drop down
    list and put the "Yes" and "No" into values.
    Reference:
    SSRS boolean
    parameter Yes and NO instead of True and False in prompt area
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Bug SDK-17114  flex.effects.Rotate - Selection Glow Is Rotated For All Objects (Not Just Effect.Target)

    Re: Bug SDK-17114 flex.effects.Rotate - Selection Glow Is
    Rotated For All Objects (Not Just Effect.Target) at
    http://bugs.adobe.com/jira/browse/SDK-17114.
    Looks like this bug was fixed as of yesterday - I'd like to know
    when there will be a patch available to users. I bought Flex 3 just
    in the last few weeks, so it would be nice if I could get a free
    patch. However, my main concern is how to do a workaround. I can't
    deliver my application with this problem, and if the patch is not
    available, I don't have an alternative. Is there a way to access
    the selection rectangle object and set its rotation
    explicitly?

    Thanks, Michel.
    I forgot to mention one point about copying shape layers into one shape layer:  when you initially use the Shape Selection tool to select a shape for cutting, make sure the option for the Shape Selection tool is set to "Add to Selection".
    MichelBParis wrote:
    The problem with Elements+ is that it has so many features you soon forget what it can give you !
    Truer words were never spoken! 
    Ken

  • After Effects error: Unable to allocate space for image buffer

    I am having some glitchy issues with After Effects, very inconsistent, but I am getting the error message "After Effects error: unable to Allocate Space for a 7500 x 4500 image buffer. You may be experiencing fragmentation. In the Memory and Multiprocessing Preference dialog box, trying increasing the RAM to leave for other applications, and selecting the Enable Disk Cache option in the Media & Disk Cache Panel".
    Pretty straightforward, but I have a brand new 8 core dual 2.25 Mac Pro with 16GB Ram. I have it set to allow other applications to use 7GB, have jockeyed that setting between 1GB and 5GB and still gotten the same error message. Disk Cache is set to 3GB, have pushed it all the up to 7GB and still gotten the same message. I am working in 1080p, but I got the error message with Open GL on, quarter resolution, and wasn't even trying to RAM preview. I also noticed that with a straight 1080p clip .mov animation codec clip, after effects will only RAM preview about 7 seconds. That is without any other layers or effects.  I do not have all of my source footage in one folder, I am going to try that next. I am running of a fast internal hard drive that is not they system drive.  It also seems like it happens after I have been using the comptuer for awhile. If I restart the problem will usually go away for a little while.
    I think that I may have a bigger system error, the computer locked up bad once after I had it for a few weeks and since that happened CS4 has been unstable in general, especially Photoshop and Bridge. My guess is bad RAM, but I wanted to make sure I wasn't missing something with my AE settings.  If any one has any input please let me know. Thanks.

    > I lowered the minimum RAM per core to 1GB, because the Adobe site recommends that as a base setting for andHD project
    When you say "the Adobe site recommends", what exactly are you referring to? If you're quoting recommendations written for After Effects on the Adobe website, you're very likely quoting me. And this is what I wrote in the Help document:
    "Memory & Multiprocessing preferences":
    "The amount of RAM required for each background process varies depending on your system configuration; at least 1 GB per process is recommended. Optimum performance is achieved with computer systems with at least 2 GB of installed RAM per processor core."
    This blog post gives essentially the same advice, but with more explicit suggestions.
    But, as I say at the bottom of that blog post, if you find that some other settings are working better for you, that's great. Every project and computer system are different. Do what works for you.
    > Also, if it is an
    dual quad core system, there should be 8 cores, but in the
    multi-processer preferences panel it lists CPU's as 16.
    The number of "virtual" processors can be double in a system that uses hyperthreading. After Effects doesn't actually treat these as separate processors in this context, though.

  • Bookmarks are saved yet after using the page icon is still displayed instead of the actual icon for the website. I have followed the directions for "Favicons do not display".

    My bookmarks, on a HP Pavilion dv-7-2273cl notebook, are saved yet the page icon is still displayed after using the bookmark instead of the actual icon for the website. I have followed the directions for "Favicons do not display" without any success. This problem is not experienced on my much older Gateway desktop.

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_places-database-file

  • Why we use logger instead of System.out.println for debugging?

    Hi,
    why we use logger instead of System.out.println for debugging?
    Regard
    Sankar

    Ya Basha,
    good question....
    You can use the idoc method to transfer the data when you are having an interface between the sap system and the legacy system......
    All the times BDC is not preferable like take the case you developed on upload program with bdc after some days your company thought to go for upgrade the sap vesion from lower version to upper version... in that upgraded version the application may change like sequence of fields or screens at that time you previous bdc program will not work here so u have to develop a new program and and you have to take the things into consideration again...
    where as if you use bapi or idoc method it will support the upgradations...
    in the case of bdc you have to take the data into flat files.... and then upload it to sap system after all the validations done some times the data which is in the flat file is confidential so there is no security if u take such data in flat file any user can chang the data even though if u maintain the data in application server super user can change the data
    where is idoc is fully secured... you can easily establich the interface between the systems and once it is done you can transfer the data with full security because idoc r generated by a program... so there is no manual interaction.....
    I think i gave some useful answer to you
    ~~Guduri

  • I've been charged 30.74 EUR instead of 19.99 EUR for student and teacher edition this month. why?

    I've been charged 30.74 EUR instead of 19.99 EUR for my creative cloud student and teacher membership this month. Why is this the case?

    Hey ! Welcome to the community ^^
    The student discount only lasts 12 months. This is maybe the reason why it's expired.
    Here' the link to contact the support. *click*
    The support usually replies within 24-48 hours
    Peace

  • HT201304 Instead  Adob flash player what for iPad 2 cuz it is not suitable to watch & play

    Instead  Adob flash player what for iPad 2 cuz it is not suitable to watch & play video , I'm sure there is a solution !!

    IOS device do not support Flash
    However Skyfire, Photon, iSwifter, Browse2Go and Puffin Web Browser will provide limited Flash capability

  • While I'm addressing an email to several of my contacts, is it possible to keep the contacts folder up on the screen instead of calling it up for each individual person I wish to send the email to?

    While I'm addressing an email to several of my contacts, is it possible to keep the contacts folder up on the screen instead of calling it up for each individual person I wish to send the email to?

    Thanks for your help. On my own, I also discovered that in "mail" I could go to the menu bar and "window" and down to "address panel" which brought on screen and from there able to drag and drop addresses. As stated, I am a Mac "Newbie" and appreciate your help.

  • Can I open .pmd files in indesign? And how? Since indesign is a "substitute" for PageMaker it should/must be possible, but I don't know how to do it

    Can I open .pmd files in indesign? And how? Since indesign is a "substitute" for PageMaker it should/must be possible, but I don't know how to do it

    CS6 was the last version capable of opening Pagemaker files. It's included with Cloud subscriptions, so if you don't have it installed (or an earlier version) you can download it from your cloud subscription.
    To open them you use File > Open..., but the quality of conversion can range between nearly perfect and total garbage, depending on the PM file and the status of links (unembed images before trying to convert).

Maybe you are looking for

  • Apex Application Parent Tabs

    Request for other peoples experience with problems using the apex_application_parent_tabs view. We have solved the problem that follows, but are interested in finding out other peoples solutions to this problem. We have used the following dynamic tre

  • Passing parameter values to powershell function from batch file

    Hello ,    I haven't used powershell for a while and getting back to using it. I have a function and I want to figure out how to pass the parameter values to the function through batch file. function Check-FileExists($datafile) write-host "InputFileN

  • Oracle 8 in windows 2003

    Hai All, Oracle 8 support windows 2003 ? any patches needed? please help.. Shiju

  • IS-Retail: MATERIAL_MAINTAIN_DARK_RETAIL

    Hello, can anybody explain why this FM gives a success message, without updating the fields I wanted to change. Thanks, Manuel report  zewm. data: gv_artnr type matnr,       gw_artnr type matnr,       gw_kz_prf type messagetyp,       gw_amara type ma

  • 1to1 mail: Groupware Integration: transfer attachements

    Dear experts, We are setting up One to One e-mail integration with Microsoft Outlook so Account Managers are able to transfer specific e-mails from their Outlook account into CRM. We have taken all the required steps and are able to transfer the e ma