Crossover couldn't work in snow leopard

I couldn't run crossover in snow leopard. Can anyone help me? I tried to download x11 however, it is said that i already have one in my mac... Help me...
Message was edited by: close2u

Perhaps something on Codeweaver's site will help:
http://www.codeweavers.com/support/wiki/CXOfficeMac106
If not, you might try asking for help in the Crossover Mac forum.
Regards.

Similar Messages

App Store Pages no longer works on Snow Leopard after upgrade

I bought Pages (and Numbers and Keynote) from the App Store last summer. I have been using it on Snow Leopard (10.6.8) with no problems up until a few weeks ago. Since then I must have told the App Store application to update all applications with updates (though I don't particularly remember doing that), and now when I attempt to open Pages I get a dialog box saying "You can't use this version of the application Pages.app with this version of Mac OS X. You have Mac OS X 10.6.8. The application requires Mac OS X 10.7.4". This is outrageous. How can a routine update of a App Store app stop it from working without any kind of warning? How do I revert to a version that will work on Snow Leopard? Don't just tell me that Pages isn't supported on Snow Leopard, because the version I bought last summer has been working just fine. Am I supposed to Google through pages and pages of information looking for warnings before I upgrade each application before updating? (I also own Aperture.) And what if I make a mistake and accidentally upgrade to a version that no longer works?

Which version of Pages 09 do you have? You don't need higher version than 4.0.4 on Snow Leopatd. Here you can download the iWork 9.0.4 update.

My XP printer no longer works with snow leopard over the network

My XP networked printer (Samsung 4200) no longer works with snow leopard after Mac update. Printer hooked up to XP and can access it through network.
When I print it requests that I to authenticate the printer with a user name and password but it's not password protected. I don't have a password, but I tried all the usuals anyways.
It worked fine a couple days ago, and I've tried everything since. I've reset my printers, turned off both computers. Plugged the printer directly into the Mac - didn't work at first but downloaded a new driver Splix - 2 (Samsung doesn't make an OS X driver for this printer) and got it working. Reinstalled Bonjour on the PC, which can't even see a printer now. Any help would be hugely appreciated.
THanks in advance.

helpthismacuser wrote:
When I print it requests that I to authenticate the printer with a user name and password but it's not password protected. I don't have a password, but I tried all the usuals anyways.
Connecting from a Mac to Windows is password protected. If you tried to connect to a shared folder on Windows you would also be prompted to enter your Windows credentials. So when you do print next time, enter your Windows user details and password. If XP has no password then set one - it is bad practise to have a Windows computer without a password. And updates to Mac OS X expect you to have one set in the Windows computer.
If for some reason you don't want to set a password in XP then enable the Guest account and you can use this on the Mac when you get the prompt (either select Guest or type it in).

HP Photosmart C6300 printer/scanner not working after Snow Leopard install

HP Photosmart C6300 printer/scanner not working after Snow Leopard install
Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

Keith,
I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

Rumor: CrossOver doesn't work properly on Leopard?

I've been reading around a lot because i am going to buy a new Imac 24 inch with 2.8 Ghz, preinstalled with Leopard... and i've discovered that the planned program i was going to buy called CrossOver did not work properly with Leopard.
What have you heard about this?
Thank you very much, the answer will help me a lot in my purchase for i do not want to buy a Windows OS, because that would mean Virus protection... etc
- Nick
Message was edited by: NickClermont

Just thought I would add CrossOver didn't work all that great in Tiger. Very few programs are supported by it. If you need to run a program in it they want you to figure it out and then tell them how to do it. I tried it on some of the programs they said they support. Internet Explorer for one and it didn't work. I gave up after a week and went to VMware Fusion.
They are also a little misleading. On the main page they show 3486 applications in database. Which is probably true. But when you check the compatibility page below. There are only 117 applications supported by CrossOver. The program is a good idea and someday may be worth the money. I have a problem paying money for a program and then having to do all the work to get something to work. Be sure to try the 30 day trial before your purchase. This would allow you to figure out if it's right for you.
http://www.codeweavers.com/compatibility/browse/cat?showall=0

When I send an email with bcc recipients, the bcc does not show in my sent mail so I can't reference back later who I sent the email to. Worked in Snow Leopard but not in Yosemite. Please advise if their is fix for that.

When I send an email with bcc recipients, the bcc does not show in my sent mail so I can't reference back later who I sent the email to. Worked in Snow Leopard but not in Yosemite. Please advise if their is fix for that.

Did you select View->Bcc Address Field from the menu bar?

HOW to temporarily use Broadcast monitoring work on snow leopard OS X v10.6.8 for FINAL CUT PRO X

thx,macmacmac give me prompt.He had an interesting trick for getting the OS X Lion 'only' plugin to work on Snow Leopard
To install the plugin on Snow Leopard OS X 10.6.8 you have to temporarily change your system version number to Lion 10.7.2!
1. Go to HD:/System/Library/CoreServices/SystemVersion.plist
2. Copy the file to the Desktop
3. Open the original with a text editor and change the string value of 'ProductVersion' and 'ProductUserVisibleVersion' to '10.7.2'.
4. Save & Overwrite.
I suddenly thought Apple said that Broadcast monitoring work on Lion OS X v10.7.3.I change system version number at once! Changing 10.6.8 snow leopard system version number to Lion 10.7.2!
ok,no problem. Restart final cut pro x,A/V output has appeared in FINAL CUT PRO X preferences and Window Menu
Enjoy it.HAHA!:cheer:

thanks for the tip fan!

I wanted to buy a Dragon ,Speech Recognition Programme for Mac but it says its for Lion, and I have Snow Leopard. Would it have worked on Snow leopard?

I wanted to buy a Dragon ,Speech Recognition Programme for Mac but it says its for OS Lion, and I have OS Snow Leopard. Would it have worked on Snow Leopard?

The simplest method would be to ask them for their Snow Leopard version and say you can't upgrade to 10.7 or 10.8. I'm almost sure they will sell you a copy.
Generally if your machine can only upgrade to 10.7 Lion and not directly to 10.8 Mountain Lion, then it's best left on 10.6.8. in my opinion as your going to loose too much other software and slow down your machine in the process.
This rapid OS X upgrade cycle has caused plenty of problems for users and developers alike, so I suspect you will find a sympathizer with the developer.
In fact I'm not recommending Mac's to anyone anymore because Apple simply has lost touch with reality.

Get UK O2 USB mobile broadband dongle to work on Snow Leopard here:ther

Mobile Connect won't work on Snow Leopard, as you'll have discovered if you're looking here.
1. Insert the modem into a USB port.
2. Open the virtual CD image it makes
3. Control click (right click) the MobileConnect application
4. Select Show Package Contents
5. Open the Contents, then the Resources folders
6. Double click MobileConnect_DrvApp.pkg to run it. use this to install.
7. Double click MobileConnect_DrvApp.pkg to run it *AGAIN*
8. Open System Preferences and select the Network pane.
9. Click the + at the bottom left, unless HUAWEI mobile is already in the list. If not, slect it as the interface after pressing +.
10. Select HUAWEI mobile in the list. Set telephone number to *99# , account to o2bb and password to password
11. Click advanced (bottom right)
12. Set vendor to Other and model to HUAWEI mobile. Click OK.
Click connect and surf.
I am sure that the basic principles will work for any other provider using HUAWEI USB 3G modems.
I hope that helps. If I got something wrong, let me know!
JKB

Hi
To be honest this Huawei E160 device is not known to me but I goggled a little bi for devices details.
Is it this: [Huawei E160|http://www.three.co.uk/personal/mobiles_/discover.omp?CID=1215014587304&PAYG=true ]
Anyway in your case I would recommend contacting the Huawei support for some details and solution proposals:
Check [this|http://www.huawei.com/] page and choose Technical Support
Good luck

With the Lion, the copy and paste commands don't work. So if you choose a photo and right click Copy, this photo can't be pasted in another event. This used to work with Snow Leopard.

The copy and paste functions in iPhoto used to work in Snow Leopard, but not with the Lion. How do I copy and paste photos from one event to another? What I don't understand is that it used to work with Snow Leopard, and now that the OS has been upgraded to Lion, it doesn't?

Instead of copy and paste drag the photo to the new event. Or flag it and use the add flagged photos to selected event command
LN

What version of iLife works with Snow Leopard 10.6.8, and where can I buy it?

What version of iLife works with Snow Leopard 10.6.8, and where can I buy it?

Welcome to Apple Support Communities
You can install the latest version, iLife '11. It's available at the Mac App Store, but the versions available there aren't compatible with Mac OS X Snow Leopard, so you have to get iLife '11 on a DVD at eBay or Amazon > http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES
After installing it, open  > Software Update, and install the most recent version for Snow Leopard

Garageband 4.1.2 won't work in Snow Leopard. Why? Please help.

Garageband 4.1.2 won't work in Snow Leopard. Why? Please help.

It might be a PPC application. You may need the optional Rosetta install.

Address book and ical not working for snow leopard clients

We have upgraded our server to mountain lion from snow leopard.
At first glance all appears to have gone well, however, the ical and address book services don't appear to be working for snow leopard clients. These services DO appear to be working for lion clients.
Any ideas?
Thanks.

I am at work right now and don't have access to my Mac. But I need to as if your Dad is on Windows Active Directory network? I also found these directions for Princeton's 2010 Exchange that might help. Did he set up the Address contacts & iCal Calenders were enabled when setting up the account in Mail?

A fix for screensavers that don't work with Snow Leopard?

is there a fix for the screensavers that no longer work with Snow Leopard? some of the developers have came out with new versions, but a few of them have been abandoned by their authors. Is there a way to run those screensavers in 32 bit mode?

Is there a way to run those screensavers in 32 bit mode?
Not without action by the original authors, sorry.
I know it doesn't help right now, but like all other OSs in the past, these types of things need to catch up since the bar has been raised once again...give it time and there will tons of entertaining s'savers out to pick from.

M-Audio MIDISPORT UNO USB Not Working With Snow Leopard

My Snow Leopard installation worked fine except until I plugged in my MacBook to my Casio Privia with the M=Audio MIDISPORT UNO USB cable to run GarageBand. I'm getting a MIDI error which states it can't work with the latest operating system. It doesn't surprise me though for all the software and hardware driver updates that have to catch up to such a new OSX 10.6. I went to the M-Audio site to download the latest driver, but the drivers only were compatible with OSX10.5.8.
This is an alert at the site
Mac OS X 10.6 Snow Leopard Support Coming Soon
Avid/M-Audio working closely with Apple to offer support for OS X 10.6
Avid/M-Audio is pleased to hear that Apple has released Mac OS X 10.6 Snow Leopard. We’ve been working closely with Apple to bring Snow Leopard support to the M-Audio® product line, as well as the Pro Tools® product line and extended product families. We ask that all existing Mac users please wait to upgrade until we officially announce Snow Leopard support. Stay tuned for more information in the coming weeks.
This is a bit of a concern, because I need to get GarageBand running again with the MIDI hook ups. Is there a work around anyone knows about to get MIDI working with Snow Leopard.
Thanks Steve

I ran into a similar problem. I discovered one thing which may help you out though. It works OK with my Yamaha P200 keyboard but it does not work with my Yamaha NP30 keyboard. I looked at the MIDI stream and the only difference seems to be that the NP30 sends a continuous stream of MIDI clock, whereas the P200 does not. My theory is that this clock stream is somehow confusing the driver. I can't seem to disable the MIDI clock on my NP30 but if your Privia has the ability to disable MIDI clock, then it may be worth a try as it will probably fix the problem until they come out with the proper drivers.

Crossover couldn't work in snow leopard

Similar Messages

Maybe you are looking for