Crosspost: Has anyone used a Redlake camera with LabView/Imaq?

"I can't seem to find any drivers or utilities for the Redlake camera i'm using in my project.
Only this: http://www.imagemill-tech.com/Redlake/ Fr_Redlake.htm
But there's no info on how to get that VI (I've e-mailed them, of course).
Any additional information on using the camera with LabView/Imaq would be much appereciated"

"Kasper B. Dall" wrote in message news:<[email protected]>...
> "I can't seem to find any drivers or utilities for the Redlake camera
> i'm using in my project.
>
> Only this: http://www.imagemill-tech.com/Redlake/ Fr_Redlake.htm
>
>
> But there's no info on how to get that VI (I've e-mailed them, of
> course).
>
>
> Any additional information on using the camera with LabView/Imaq would
> be much appereciated"
I just find the section out for you about remote control of your
camera:
1.7.1 Remote Control.
Redlake Imaging also supplies the Serial1 program that enables a
computer to control the
MotionScope system from a remote location through the serial port.
Refer to Manual Addendum
9400-0014 for detai
ls of the Serial1 program and how to control the
MotionScope system from a
remote computer using a standard communications program.
So you need to find the serial command (for RS232) in manual addendum
9400-0014. I couldn't find it in website maybe I did not search
throughly, but you may have it if you own the camera. And these
commands are just for controlling the camera system, not grabbing the
image, so you may need a frame grabber to get the image into your
computer and do the further processing.
Irene
[email protected]
> http://www.geocities.com/irene_he/IVision.html

Similar Messages

Has anyone used a Redlake camera with LabView?

I can't seem to find any drivers or utilities for the Redlake camera i'm using in my project.
Only this: http://www.imagemill-tech.com/Redlake/Fr_Redlake.htm
But there's no info on how to get that VI (I've e-mailed them, of course).
Any additional information on using the camera with LabView/Imaq would be much appereciated

It looks like the Redlake VIs from ImageMill allow you to write serial commands to your camera. In LabVIEW, you should be able to write your own serial commands using the Serial Read/Write examples that ship with LabVIEW.
I'm curios exactly which Redlake digital camera you have. Redlake cameras are often found under the names Roper (their parent company) or Kodak. I suggest going to www.ni.com/cameras to see if there is a camera file written for your specific camera. If not, please go to www.ni.com/ask to contact an applications engineer.
Kyle V

Use Photonic Science Camera with LabView/IMAQ

Has anybody had any experience with a Photonic Science camera ? I want to use the PS CoolView 12 with LabView 6/IMAQ 2.5.5.
Thank you !
Guido

Hello,
I come from France and got exactly the same material as you. If you get the chance to have answers to your questions just give me the place to deal becaus I'm still looking for answers
Regards
PIL

Has anyone used the NAG libraries with LabVIEW?

I try to get the "g08cgc" (chi-square calculation) running, but LabVIEW hangs up everytime I start the VI..
Some tipps ... ?

Here is the code (wirtten with LV7.1)
Let me say that I'm a newbie using statistical functions and calculations.....
For the calculation of Chi-square I have the followind input variables:
- measured values
- calculated values
- coefficients
If you/someone can give me some tips how to calculate chi-square with this input variables it would be very helpfull (e.g. maybe MS-Excel can do this,too ?! Using .NET etc?)
Thanks in advance!
Message Edited by _avr_ on 01-19-2009 01:43 AM
Attachments:
NAG_g08cgc.vi ‏38 KB

Has anyone used a Dell 1908FPb with a MacBook Pro OSX 10.6.8? What do I need to get/do? thanks

Has anyone used a Dell 1908FPb with a MacBook Pro OSX 10.6.8? What do I need to get/do? thanks

Hi 4judy,
If you are looking to use an external display with your MacBook Pro, you may find the following articles helpful:
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/ht3382
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
Regards,
- Brenden

Has anyone used Aperture 2.0 with 8800GT?

Has anyone used Aperture 2.0 with the new 8800GT? I'm about to order a new Mac Pro and wonder if Aperture will get a speed boost with the 8800GT over the HD 2600XT. I've read many times that Aperture is very GPU dependent, but then I've also read, on Barefeats.com for example, that the graphics card really doesn't do that much of a difference after all.
For me, on my dual 2.0 G5 with 4.5GB and a X800XT, what's been most annoying with Aperture 1.5 has been the slow load times for raw images (15-20MB). But now with the quick preview mode in Aperture 2.0, that really isn't an issue any more.
Is the 8800GT worth waiting for, or should I just get the Mac Pro now with the HD 2600XT?

Hi Don
I'm using Aperture 2.0 with the 8800GT. My system is the new MacPro 8 core 2.8GH with 10GB RAM. I'm shooting Nikon D3 lossless compressed RAW files. Approximately 12-14MB each.
I do not need to use the quick preview mode. Images open instantaneously,either fit to screen or 100%. All the image adjustments are shown with no time lag. My D2X uncompressed raw files,19MB, display in approximately one second with quick preview turned off.
I'm no MAC hardware expert so I don't know how much the speed is the result of the 8800GT but I'm just one happy camper.
Hope this helps
John Blake

Has anyone used Verizon Fios Services with Windows 7 ?

Has anyone used Verizon Fios Services with Windows 7 ?

Yes Beta And RC. It works the same as Vista, with probably some enhancements. Didn't have any issues, but I did not try wireless.

Has anyone used Toast 7.02 with Dual Layer media?

I bought a three-pack of Verbatim +R double layer discs just to experiment with (this is my first Mac with a DL burner). I've had some problems with Toast simply not responding but other than that occasional problem I've been able to burn Sony DVDs at 8x.
I'd like to try to burn one of the dual layers but I don't know if I should start with Toast or just create a burn folder or just let the OS do its thing or what.
Has anyone had experience with DL disks and Toast? The drive in my Intel iMac is a "MATSHITA DVD-R UJ-846" (I've heard that some iMacs have different mechanisms?)

Thanks - I'm going to give it a go today. Just from the general impression I have from numerous conversations and lurking around here and other sites there seems to be a growing consensus that Verbatim DVD media is the best (and possibly CD media as well). I usually tend to simply buy whatever is on sell in the week when I'm running low and Sony media has done well while with Maxell (usually the brand on sale!) I usually find a few clunkers in a spool (mind you this was with my MDD G4,and I had both slots tricked out with Pioneer 106's).
I'm going to go web crawling later today, too, to see what the best pricing is for Verbatim DL's - I paid $23 at Office Depot for three in jewel cases but it was the only DL packaging they had and I'm sure prices have come down! (One would think!)
I've been using 7.02 since its release in November (?) but, with Toast, I always make certain not to trash my old app so that I'll not need to fish out the CD should new versions emit flying insects. I DO wish Roxio would release Toast as a Universal app - and soon! I also may try going back to 7.01 to see if that might 'fix' the occasional freeze I'm getting.
Thanks so much for letting me know about your success with Toast and Verbatim +R DL media - I am almost borderline OCD about back-ups and the more I can fit on a single disc the merrier I will be!

Has anyone used a MacBook Air with a TV as a monitor?

Wondering if anyone can advise on experience with using a tv as a monitor? I don't believe Mac make just a monitor for this purpose do they?

it's ok, highly pixelated, meaning you will see pixels. I would say its great to watch videos, but any reading or such will be displeasing. Really depends on the pixels per inch of your TV also. But, I would stick with nothing more than 27" for reading or anything text based.

Has anyone used a NI 9134 with DasyLab 13

I am consdiering purchasing a NI 9134 for in vehicle data logging. I would like to run it using DasyLab 13.
Has anyone tried this?
There's never time to do it right, but there's always time to do it over!

Devon,
I think that it's pretty reasonable to ask about NI hardware support by NI software. That's one of the goals of this board.
Will DASYLab run on a cDAQ-9134? Has anyone done it? Can anyone who has one try it?
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

Issues when using a Pixelink camera with LabView 9.0

In my lab, we have a program for video acquisition using LabView and the low level camera functions for Pixelink cameras. We run into some problems trying to run this program and other demo gui programs that came with the Pixelink SDK. In our data acquisition program, we have problems with our image coming out all scrambled. We use the low level functions to obtain a frame from the camera in the from of a vector. We then reshape the vector into an array and then send the array to a vi that turns it into an image. When we try to view this image using the standard Labview image viewer, the image comes out all scrambled if the zoom factor is not set to .5 on the image viewer. The full resolution of the image is supposed to be a 1024x1280 image which when we use the Capture OEM software for the camera provided by Pixelink we can see. The image that we can see through LabView when we have the correct zoom factor seems to be only the top left quarter of what the entire image is supposed to be. We also encounter strange problems when we attempt to use the demo programs for labview 8.6 that are provided with the SDK. When trying to run the simpleGUI.vi, for example, the program connects to the camera just fine. After you hit play to view an image, the problems start. The program will play the video for a few seconds until it just freezes up and quits responding. Labview must be exited and restarted in order for the camera to connect again. I am not sure if it makes a difference that we are running labview 9.0 on our computers or not. Any help you have on these issues would be of great help. Attached are pictures of the scrambled/unscrambled image and of the part of our block diagram for camera control.
Attachments:
Incorrectimage.jpg ‏126 KB
Errorexplanation.jpg ‏543 KB
correct image.jpg ‏22 KB

IMAQdx is the driver that National Instruments provides to interface Firewire, GigE and USB cameras (Directshow compliant USB). This is a licensed driver, so if you don't currently have it, then testing in MAX is not an option.
So if I understand correctly, you have the Pixelink software which works fine, but you have Pixelink VI's that are used in LabVIEW, but those do not work correctly? That to me seems like a driver issue, which I'm not sure how much I can help with since it is not our driver.
Do you know what dll's the Pixel link VIs are calling into? Are they Pixelink dlls? If so, I would suggest speaking with the manufacturer or perhaps on of our other users has worked with Pixelink before.
Sorry I can't be much more helpful.
Tejinder Gill
National Instruments
Applications Engineer
Visit ni.com/gettingstarted for step-by-step help in setting up your system.

Has anyone interfaced an Instron 5500 with Labview?

I'm trying to get my company to buy labview. If I can get it to control an Instron 5500 they will be sold. Has anyone attempted to do this? Instron tells me that they do not have Labview drivers.

I did a couple of Instrons with Labview a few years back, but they were older models (2725 and 2734 if my memory serves me right for numbers). I wrote the daq and machine control software in Labview from scratch. Neither of these machines was new enough to have a GPIB port, they were the type with the old mechanical recorder outputs. I had to re-work some of the machine mechanics and electrics to take a custom interface adapter from a NI Lab 1200 Daq card. I also had to build a custom extensometer for one unit. I don't know if I could be of any help to you, but I would be willing to work with you via e-mail and offer what assistance I can. I have 38 years in custom machine controls and general process instrumentation, so I have quite an extensive background to call upon. If you are interested drop me an e-mail at:
[email protected]
Dave

Has anyone used this cool WebCam with a Mac yet?

i'm in the market for a webcam for my new mac pro. i'm looking for the very best one out there. i ran into this WebCam called "aGent V4 HD". It looks awesome! Its a 3MP HD WebCam that comes with a desk mount and LCD mount. But its sold out of Australia. I was wondering if anyone has used it with osx 10.5.6.
here's a link:
http://agent.liquiddigital.com.au/index.htm

I've just taken delivery of one of these and have to say that, a few glitches aside, I'm pretty impressed. It looks quite sexy and gives a great quality picture that has been commented on by all Skype correspondents who hitherto were used to my looking like a bowl of porridge.
It comes with 3 useful mounting devices including a great grappling hook looking thing which will hang on top of my 30" cinema display but I actually prefer to have it on the floor stand at head height otherwise the angle is a bit high from all the way up there.
The only disappointment for me is that I cannot seem to get the internal mic working. Fortunately it does come with a clip on mic which does work when plugged in via the USB gizmo but the built in cam mic just won't play for me.
I wonder if I'm missing something because I have an older webcam with a built in mic which again I have never had any joy with.
Any useful suggestions in this point gratefully received!

Has anyone used a canon zr850 with FCEHD?

I am thinking about buying a Canon zr850. Does anyone here have one? How campatible is it with FCHD? Any tips on Camera's?

The ZR850 will work with FCE. You should look for camcorders that -
- record to DV and/or HDV
- use tapes
- have Firewire output
The ZR850 has all three.
However, it does not have an external mic input, which you will quickly find limiting unless all you're filming is 'kids in your backyard.' The ZR800 has an external mic input.

Has anyone used Rhapsody To Go with their Zen Vision

I'm getting a Zen Vision M later this month to replace my Zen Xtra. I have the Rhapsody To Go service. I was wondering if anyone else uses Rhapsody. I want to know how easy/difficult it is to tag songs with album art after the music has been transfered to the player via Rhapsody.

bumping thread......
If anyone has used Rhapsody with their Vision M, I'd like to ask you a few questions.

Crosspost: Has anyone used a Redlake camera with LabView/Imaq?

Similar Messages

Maybe you are looking for