Crosstab Header Labels - Can they be merged?

I have a crosstab report and I would like to be able to put one label above the dynamic columns. If there was a way to merge the header cells above
Since this report will always have the same number of dynamic columns, I tried putting a cell on the report that is as wide as the total of the dynamic columns. That works fine - until somebody decides to add a dimension down the left side.
I'm not sure if it's even possible but if anybody knows of a work-around that would help me, I would apprecaite any ideas and/or suggestions.
Thanks.
Ron

Hi Ron
I have Done the following thing
1.create variable
=Sum([measure]) ForAll ([Dimension];[Dimension])
2.if you want each
=Sum([Dimension]) ForEach ([Dimension])
for example
i have taken 2 dimension i.e Category,Year and 1 measure SalesRevune(here year i have taken header in Crosstab)
for this i have taken variable like this
=Sum([Sales revenue]) ForAll ([Category];[Year])
if you have any doubt or any additional requirement please let me know
Thanks
Prasad
Edited by: S R Prasad Reddy on Jul 29, 2011 1:43 PM

Similar Messages

I have two accounts with iTunes. Can they be merged or somehow combined so that I can have access to everything from both my old iPod Touch and my new iPhone5?

I have two accounts with iTunes. Can they be merged or somehow combined so that I can have access to everything from both my old iPod Touch and my new iPhone5?

No.
You can authorize your computer for both accounts. Put all of the music on one computer. Sync your devices to that computer.

I have two Adobe ID's. Can they be merged?

I'm not sure how this happened. There's only one of me, but I have two Adobe ID's (linked to two different email addresses). Can they be merged so that I have only one ID and no confusion for me or for Adobe?

Hi All,
If you have purchased various perpetual licenses under different email IDs then :
A) If they are retail products(products are registered in adobe.com),
It can be done by transfer of license.
B)If they are volume licensed(products are registered in licensing.adobe.com)
It can be done by 1.Transfer of license,2.Merge of IDs(if they are under the same Org. name, physical region etc.)
If you have subscriptions then:
Since Subscriptions are based on Email ID, they can not be merged.
You can contact Adobe via http://helpx.adobe.com/contact.html?
Please provide the details of your purchases to the contact person of Adobe to get customised responses of your queries.
You can inbox your purchase details privately, I will let you know the options available.
Regards,
Rajshree

Two Skype Accounts; Can They be Merged?

I have two skype accounts, one I set up and could not use, but it has credit. The other is current, and I would like to merge them, or transfer the balance from one to the other, so i can use the pending credit. Does anyone know how to do this? Is there real tech support for skype, or just user community? Also, I Just got a recharge, (when credit falls below a certian amout, skpe can automomatically recharge your balance, and charge you) but I'm SURE I didn't sign up for this. I've de selected this option after being charged $10, but I'm wondering if anyone else has had this experience.

Hi, Valirosi, and welcome to the Community,
I arranged to transfer your post to the Skype Account: Rates & Subscriptions message board as it did not quite fit where you had added it.
Skype does not permit any credit, features, or subscriptions to be transferred from one account to another. Likewise, Skype accounts can not be "merged" to create one new account, and neither can one Skype account be merged or folded into another.
You would need to request a refund of credit you do not need from the account where you no longer need it, and purchase new credit for the account where you will use it.
For subscriptions and call features, you would need to cancel the subscriptions on the account you will not be using, and purchase new subscriptions for the account where you would use the subscription or feature.
Credit tops up automatically by default; if you do not wish to use this facility, you will need to disable it within your account details. Check your account settings just one more time ...
https://support.skype.com/en/faq/FA570/what-is-skype-credit-and-how-can-i-buy-it
https://support.skype.com/en/faq/FA297/how-do-i-request-a-refund
Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
I add this information in an effort to help walk you through the process:
You will need to proceed through each step, one at a time. Sign on to the Skype website as requested. Choose the subject and topic which most closely matches the item you need assistance with. Then, continue past Step 2 of the instruction where several articles from the FAQ library will appear for you to review, and proceed to Step 3, Continue Support Request (the blue "button" appears at the lower right corner of the website page). You may also skip through Step 4 where you will be referred back here to the Community; no need to do this as the Community is where you started. When you complete the webform and click Submit, your information is relayed to Skype and you will receive a reply via e-mail.
If you are a Skype Premium or other eligible customer, you will be routed to start an instant message chat session with a Customer Service agent.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

I have 2 icloud accounts. can they be merged into one?

I have two iCloud accounts and want to delete one of them. Can the two be merged into one?

Welcome to the Apple Community.
You can't merge accounts but there may be some things you can do, what exactly are you trying to achieve by merging accounts.

Transfer apps from iPhone to iTunes, can they be merged?

Hello!
I'm hoping you can help me with. I purchased an iPhone 5, ios 6.1.2 for a friend and it already has some cool apps on it. My friend already has an iTunes account for the iPod shuffle for music so he has no apps or photos. The phone to put some apps and photos on the phone then send it to him. When he connects with his iTunes will it erase the apps on the phone?

lmc0407 wrote:
When he connects with his iTunes will it erase the apps on the phone?
An iPhone is meant to connect to only one computer, so when he connects it he'll be prompted to erase the iPhone. That means all apps, photos, music, etc. on the iPhone will be erased.
App purchases are intended to be used by only one Apple ID, and you cannot share apps across IDs without a lot of effort and hassle.

I have ended up with three accounts can they be merged to one

I have ended up with three Apple accounts !!!!
This is causing me nightmares , is it possible to have them merged into one ? And how?
Many thanks

At the present time Apple will not merge accounts (I have 3 myself). The best thing to do is choose one for all your future purchasing.

Scorecard Component Header Gridlines - Can they be changed?

Is there a way to change the color of (or turn off) the gridlines between the headers in a scorecard component? I've found how to do it in the body of the scorecard, but just not the header. Any suggestions would be greatly appreciated.
I am using Xcelsius Enterprise 5.3.0.0
Thanks.
~Alison

actually i got surprised when i found this issue
there is no option to change its color or even hide it.
good luck
Amr

I had MobileMe and an iTunes account. I moved MobileMe to iCloud and now have two accounts. Should they be merged? can they be merged?

For those of us with both mobileme to icloud and an itunes account which are not one in the same, which one do you use and is it possible to merge the accounts.

Creating an iCloud account: Frequently Asked Questions

Apex IR report with Heading label

i have IR report with 15 column with heading..
The end user can accessing from different department, when the user can see the report shown only their particular department rows only. each department have different column value and Header label .how can display the column header depend on the department user.
e.g. IR report view
Seq# -- Department -- date -- Subject/Customer Message
1                          Communication done with Jony(from HR department)
2                          low sales from East region(from Sales Department)IN the IR report Table data structure.Heading_code value as LOV in IR form(1.Subject/2.Customer Message/ect...) and Column_value as Text Field.
Seq# -- Dept_name -- Heading_code -- Column_value
1        HR              1           Communication done with Jony
2        Sales           2           low sales from East regionApex have limitation of one IR report in one page. so i could not create different Report region even i don’t want create another page due to the further functionality issue.
Thanx,
Ram

I'm glad you could apply that approach. I'm not crystal clear on what is needed but I have a few general ideas.
1) If there will only have 3 or 4 classes (types) of users, you might try using a CASE statement in a Before Header process:
BEGIN;
CASE
    WHEN condition for 'KAC' THEN
         SELECT [first label constant or variable], [second label], ...
              INTO &Px_COL_HEAD1., &Px_COL_HEAD2, ... FROM ... ;
    WHEN condition for 'MIS' THEN
         SELECT [first label constant or variable], [second label], ...
              INTO &Px_COL_HEAD1., &Px_COL_HEAD2, ... FROM ... ;
    WHEN condition for "ADMIN" THEN
         SELECT [first ADMIN label constant], [second ADMIN label constant], ...
              INTO &Px_COL_HEAD1., &Px_COL_HEAD2, ... FROM ... ;
    ELSE -- default case
         SELECT [default first label constant or variable],
                     [default second label constant or variable], ...
              INTO &Px_COL_HEAD1., &Px_COL_HEAD2, ... FROM ... ;
    END;
END; NOTE: Do not make the "ADMIN" case the default. That seems like a security hole. I would always want a data check for the ADMIN case.
2) Or put the above code in an Application Process rather than a Page (Before Header) Process so it's only computed once.
Does that give you some ideas?
Regards,
Howard

II never use tabs at a desktop. Tabs in desktop Firefox are obstructive. Can they be eliminated, ever.

II never use tabs at a desktop. Tabs in desktop Firefox are obstructive. Can they be eliminated? ever?
There seems to be a jackboot coercion to eliminate a multi-window view in Firefox to the point where, in the current iteration, there is a permanent single space wasting tab in the header.
Like many I have many programs open, spreadsheets, text and graphic editors, sometimes 2 or more browsers.
ALL are easy to find on the task bar until they are obscured by tabs.
I followed the gravitational pull toward tabs for mobile use.
There they can be justified.
They are counterproductive in desktop usage.
Even the developers tab-killers have been eliminated.
Do we all have to accept tabs like GMOs and fluoride?
Is there a hope for a full desktop view in Firefox?

@Tony98
You will observe that this is a question for developers.
I am familiar with far more alternatives than you could suggest.
This question is for Firefox developers please.
For you less experienced home users with just one PC I will explain again.
There is a client base that prefers windows to tabs for business reasons, regardless of OS, and purely for ergonomics.
With several programs open, spreadsheets, graphic displays, sometimes 2 or more browsers, ALL are easy to find on the task bar until they are obscured by a browser with tabs open in one stack.
I see tabs as a current fad, useful for small screens on low res phones.
Tabs in apps on mobile devices is just fine.
There we use a finger or stylus.
On desktops, we use a mouse.
Current smartphones and tablets, have comparable resolution and utility to desktops.
They just lack power. That will change.
Firefox is the preeminent browser.
It is a mainstay of Linux and Linux appliances.
To push it toward "tabs only" as if just for phones is a mistake.
When MS Windows 8 is used in business it is used always in desktop mode, and with a mouse, not panes.
That's why business rejected it when released.
When the mouse disappears, tabs may become useful on desktops.
For now the mouse is here to stay, and so should the windowed browser.
As much as I dislike Internet Explorer, it has a simple "no tabs" option.
So should Firefox.

HT201342 How can I easily merge my .me and .icloud email accounts?

How can I easily merge my .me and .icloud email accounts?

You don't need to merge them - they are already merged as they are exactly the same account. They are just different addresses pointing to the same account.
mende1 has it wrong saying "you receive the same mails on both mail accounts". There is only one mail account. Both email addresses point to the same single email account.

SSRS 2008 Header height issues due to merged columns

When working on a report today we ran into an issue which took us quite some testing to figure out. At some point we decided to switch some of the headers of columns around and when rendering the report again it for some reason created a header which was
way heigher then the biggest text there, showing a huge empty space in the header underneath the text.
My first guess was that there had to be some extra spaces in some column or something alike, which made the cells grow so much. This however was not the case. As a next step I cleared the cells in the headerrow one by one to figure out which field was making
the header grow this much. It turned out to be the header in the 10th column. When I replaced the text in this cell, it did not make the header grow anymore. When I put the original text back, it started growing again. As a next step I removed the text in
this cell, pasted it in another cell (column 11) and rendered the report, with the same huge header again. Out of frustration I tried a desperate last move, copied it to column 1 and rendered the report, the effect was a small header without some weird height.
So the conclusion was that this text was making the header grow hugely in the columns 10 and 11, but not in column 1? What is the difference between column 10/11 and column 1?
Then I noticed that column 7, 8 and 9 were pretty small columns, only holding integer values. The header above this, however, was one word, so the 3 cells in the header for these columns were MERGED. So basicly, only looking at the cells in the header, my
huge text was in the 8th cell from the left, not the 10th (10th column, but due to merging the 8th cell). As a test I editted the width of the 8th column (the middle one of the merged cells) to be as wide as all the other columns holding text. The rendering
of the report, with the huge text in the original headercolumn, now did not grow my header to be extremely big. This combined with the way "hiding" works in SSRS 2008 oppose to SSRS 2005 (ie, in 2008 a hidden cell disappears completly, moving all next cells
up to the left, where as in 2005 a hidden cell just shows as empty in the report), leads me to believe that there is a bug in SSRS 2008 considering cell widths and merged cells? It is like the 10th column header now thinks it is part of the 8th column (being
the 8th cell in its row due to merging) and therefor works with the width of this 8th column to judge how much increased height it needs. In fact it is the width of the 10th column and therefor doesnt need the height it creates, resulting in a huge empty space
underneath the text.
Is this a known issue by Microsoft? Any ETA on this for a fix?

This combined with the way "hiding" works in SSRS 2008 oppose to SSRS 2005 (ie, in 2008 a hidden cell disappears completly, moving all next cells up to the left, where as in 2005 a hidden cell just shows as empty in the report), leads me to believe that
there is a bug in SSRS 2008 considering cell widths and merged cells?
Hi Joel_i,
I was a little confused with the paragraph above. Could you please elaborate it?
Based on the information posted, I tried to reproduce the scenario, but it works fine. During my test, the header cells grow
only when the text in the head column is too long which will caused newline, or there is some extra space in some columns. So, you might need to check the properties of the 8<sup>th</sup> column cell, such asSpaceAfer,
SpaceBefore, to make sure all properties are set rightly.
To provide you further assistance, could you please post the report and dataset with sample data to our data collection E-mail
address?
E-mail: sqltnsp AT microsoft.com (Please replace the AT with @, and remove additional spaces).
Thanks,
Lola Wang
Please remember to mark the replies as answers if they help.

When one or more family members who have been sharing one iTunes account wants to create their own iTunes account can they each upload the music/apps from the shared iTunes on their devices to the new iTunes account?

When one or more family members who have been sharing one iTunes account wants to create their own iTunes account can they each upload the music/apps from the shared iTunes on their devices to the new iTunes account?

Yes. I would clarify your statement about the "shared" iTunes Library though. If you want each iOS device to have its own music library, you should create separate user accounts for them. Read:
iTunes: How to share music between different accounts on a single computer
How to use multiple iPods, iPads, or iPhones with one computer

I have purchased songs from itunes on my ipad but now they are not there anymore. How can they get them back? Dont come up in songs not on this ipad and in itunes it asks to buy again

I have purchased songs from itunes on my ipad but now they are not there anymore. How can they get them back? Dont come up in songs not on this ipad and in itunes it asks to buy again

If you are now in the US then you can only use the US store, so you should update the address on your account
Changing country : Change the country of your iTunes Store, App Store, iBooks Store, and Mac App Store account.
Had you copied the songs over to your computer's iTunes library, do they show in the Music section on it ? You can copy purchases that you still have on your iPad over to your computer's iTunes library via the File > Devices > Transfer Purchases menu option

Crosstab Header Labels - Can they be merged?

Similar Messages

Maybe you are looking for