Crosstab shifts on horizontal repeating pages over textbox

I have a Text box (Drawing object) to the left of a Crosstab in a Group Header. The crosstab grows horizontally. On the 1st page its ok. On the 2nd page when the crosstab grows, it shifts the whole crosstab object over the text box to the left of it covering it up.
I tried to lock the position of the cross tab in "Format Crosstab", but it still shifts over to the left on the horizontal pages.
Any help here would be truely greatful,
-Marty

Right click on group header and go to section expert and see whether the option "Relative Positions" is enabled or not. If it is enabled then uncheck the option and see the output.
Regards,
Raghavendra

Similar Messages

Repeating Frame over multiple pages

How can i streach a repeating frame over more pages without
getting: REP-1212 Object 'Body' is not fully enclosed by its
enclosing object ''

In the object Navigator go to the Section in which this Repeating Frame exists (For example, "Main Section"). Double click to invoke it's property inspector. Increase the "Horizontal Panels per page" or "Vertical Panels per Page" as per your need. By default both will be 1.
Thanks,
-Siva B

Horizontally scrolling page views and vertically scrolling table views

This may be a feature request, and I'm trying to figure out if I'm trying to do too much in an iPhone app, but I want to have an outer view scroll horizontally with pages - easy to do with the UIPageControl and UIScrollView.
Within each page, however, I have a view (or nested views). In one of those views, I want to be able to scroll vertically (it's a table view) - but I can't! The message never gets down to the tableview because it's eaten on top - or at least it seems like it. It looks like I can do it in the simulator, but not on the phone.
Is this doable?

"Iain71" <[email protected]> wrote in
message
news:g6kj3r$s5p$[email protected]..
> This is the sort of thing I've seen on a few sites, and
wondered about
> before.
> Sometimes they can look a bit overboard, but I've just
seen one on this
> site
> that looks pretty well done, and doesn't take over the
page :
>
>
http://www.timesatlas.com/Pages/Default.aspx
>
> It's the bit below the main atlas pic, with the
different versions of the
> atlas.
>
> Does anyone know of any extensions, or tutorials for
recreating something
> along those lines? (Not sure if it's Flash or not?)
I'm pretty sure Project Seven (www.projectseven.com) has an
extension that
does almost exactly that.
Patty Ayers | www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet

I am forced to hold shift and refresh the page on 99% of the sites I visit. How do I fix this from happening? If I don't the pages are missing style sheets and etc.

When ever I go to sites they half load or are missing style sheets. If I view the source for the page and click on a style sheet link I get the following error:
Content Encoding Error
The page you are trying to view cannot be shown because it uses an invalid or unsupported form of compression.
If I hold shift and refresh the page loads as normal.
It's happening on 99% of the sites I visit. I have disabled my plugins and add-ons.
I do have some add-ons or plugins that I would like to remove completely but there is no uninstall or remove option, neither in regular or safe mode.

'''I'm NOT buying a backup Computer till, Firefox will Run on Windows 8 !'''

How can I make a gray box or gray screen in Pages over a few lines of text?

How can I make a gray box or gray screen in Pages over a few lines of text?

Thanks. Almost what I was looking for.
While that makes for a gray over the lines, it still does not form a box.
Any other suggestions to form a solid rectangular gray box?

Adobe Livecycle Designer ES 2 - how to repeat page layout in the form?

How would you repeat page layout design randomly in a form, means how the same page layout can be repeated on non-consecutive pages of an LC Form? For e.g. I want to repeat Page1 layout on Page 5 and Page 6 of an LC Form. How to do that. Please reply.

You use Master Pages to set layout that you want to use on multiple pages.
Design what you want in a Master Page and then assign it to the pages you want in Object>Pagination>Place: and choose On Page> whatever you called your Master Page.

I downloaded the Adobe free trial to convert a PDF to Word and it will not open. Further, even though I have signed in, it reverts back to the sign in page over and over and over again. How do I to convert?

I downloaded the Adobe free trial to convert a PDF to Word and it will not open. Further, even though I have signed in, it reverts back to the sign in page over and over and over again. How do I convert?

Moving this discussion to the Adobe CreatePDF forum.

Pressing "shuffle" on my 7th gen Nano will only randomly pick the first song, then repeats it over and over. How do I get "shuffle to work properly?

Pressing "shuffle" on my 7th gen Nano will only randomly pick the first song, then repeats it over and over. How do I get "shuffle to work properly?

Is "REPEAT ONE" highlighted. If it is, touch it to de-select. Cheers!

After update to O/S 7.1.2 my iPad2 is stuck on Vertical Orientation and will not shift to horizontal as it has in the past. How can I get the flexible orientation back??

After update to O/S 7.1.2 my iPad2 is stuck on Vertical Orientation and will not shift to horizontal as it has in the past. How can I get the flexible orientation back??

I agree with what FoxFifth has said, but I want to add a little to the discussion and put my own twist on the explanation.
If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
Try the side switch above the volume rocker first and see if that unlocks the screen.
If you are running iOS 7, swipe up from the bottom of the screen to get to the control center and the lock icon is in the row of icons at the top all the way to the right.
If the screen is unlocked but still will not rotate, reset the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the button

HELP!? Remove 1 page from long document and shift all the rest pages

Hello,
I am facing to following problem:
I have a long document with facing pages. Now I need to remove one left page in the middle of the document and shift all the rest pages one step forward. It means from all right pages do a left and vice versa (started from the page that was removed). There is a continous text int the whole document and left/right strip made from different photos.
To clarify the situation I am attaching the preview. I have deleted page no.12 and I need to shift page 13 to left, 14 to right after 13, 15 to left, 16 to right after 15 and so on....
Is there any simple way how to do it?
Thank you very much for any tips.

It looks to me as if you may something else going on here. Are you using right-to-left text here so the document binding would be onthe right when the book is closed? If not, your problem is not with page 13 so much as it is with the earlier pages.
Unless you force it to do otherwise by disabling page shuffling someplace, in left-to-right documents using facing pages ID will always put odd numbered pages to the right of the spine and even to the left, the opposite for right-to-left documents. In either case, it seems like you have page shuffling disabled either for the whole file or for a selected spread. You can re-enable it from the menu in the Pages panel. When ID asks if you want to maintain the current number of pages on a spread you should probably say no. Either pages 1-12 will swtch sides, or 13 and following will, and your spreads will rearrange to put two pages together as they should be.
If you have overridden master page objects, a side effect of switching sides on the spread will be that the overridden objects will remain and the new master objects from the other side of the spread will appear behind them.

Create horizontal master page?

How do I create a horizontal master page?
According to the Adobe documentation that I've found, the way to do this is in Document Setup. But I don't want the entire document to be horizontally aligned. I just want one page to be horizontally aligned. I thought the way to accomplish this would be to create a master page with a horizontal alignment. What is the easiest and best way to do that?

Are you preparing a file for print or presentation?
If it is print, I would keep the orientation of all pages the same, and rotate content for the horizontal page. Rotate the Spread View as necessary to edit content.
If it is for presentation, it depends what version of Indesign you are using.
-If it is CS5 or higher, then you can define multiple page sizes in one document
-If it is CS4 or lower and final product is a PDF, then I would keep the orientation of all pages the same, and rotate the horizonal page in Acrobat

Shifting from the second page printed

hi,
I create a report with reports10g .
the size of the output paper is 15.2 * 21 cm. the papers used are continuous paper with matrix printer .
I have a problem shifting from the second page printed.
how to solve this problem?
thank you in advance

Hey Tom - sorry I failed to mention I did try powering off and on, and then the reset as you suggested. It still does the same thing.

Adobe Reader printing 4 pages, over top each other on 1 page

I created a form for my office in LiveCycle. It's 4 pages with lots of fields to input data. I extended features to Reader users, which is what my coworkers use when they fill it out. It worked fine for several months. Suddenly, the form is printing all 4 of it's pages over top of each other on 1 page.
I've printed the same file from a different computer on a different printer, and it comes out fine. I've also printed it from a different computer, to the same printer, and it comes out fine. So, therefore, I believe the problem lies with that specific machine, and/or perhaps its Reader settings. But I've gone through all the print and document settings and can't find anything that looks out of the ordinary.
Can anyone shed some light on what might be causing this? Is it a print setting, or is there a way to reset Reader's settings to default?

Do a malware check with some malware scanning programs. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
 
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
If using the above listed scanners does not fix it or if you are blocked from installing those scanners then ask advice on one of the forums that specialize in malware removal mentioned in the Popups_not_blocked article.

Color LaserJet 2605dn for wireless printing, it keeps printing the first page over & over

When I use my Color LaserJet 2605dn for wireless printing, it keeps printing the first page over & over again. I have to cancel print job on the printer in order to stop it. It works properly on the computer that is directly wired to it, but won't on any other computer that I try to print from. I have had this problem for some time, but now have certain thing that I must print from this printer & can't do it wirelessly. It doesn't seem to be my network, because I can print from all of the other computers onto other wireless printers I have in the office.
Any advice would be appreciated!

Hello,
Thanks for the post. I've attached a link below that may assist. Good Luck!
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Horizontal repeating frame

Hello all,
I am using oracle 9i forms and report.I have created one report in oracle report builder,that report alignment is perfect .the output of report like this.
1 2 3 4 5 6...........................................................31.
it is coming rightly on report builder but when i open in pdf it is coming with different lines but need to display in one line.
i am used horizontal repeating frame for print 1....31.Is it any configuration required on report server. kindly help me.

Are these 3 queries independent of each other or linked with Data Link?
If these are linked with each other, then try the following:
Try using summary column (count) for each query and put a format trigger on the labels. If count is <> 1, hide the label.
Hope this helps.

Crosstab shifts on horizontal repeating pages over textbox

Similar Messages

Maybe you are looking for