CRS-0215 error in the step:Create the TNS Listener Process

Error listening on: (ADDRESS=(PROTOCOL=TCP)(Host= 192.168.x.xxx)(Port=1521))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux Error: 9: Cannot assign requested address
I am getting the above error when starting the listener_linux2 on linux2 node. I ran the netca configuration tool on linux1 to configure the listener. It ends in error with CRS-0215.
According to metalink note 339600.1 i should
request the interface corresponding to the VIP Address be moved to/enabled on cluster server, where the TNS Listener is being started. Once the interface is enabled on cluster server, then start the TNS Listener.
but how do i do that ?
I am going to reboot the linux1 and linux2 boxes to see if that helps/solves the issue.
Running Oracle Enterprise Linux 4 update 5 with oracle 10g R2
Thanks
Edited by: ow001294 on Aug 24, 2008 12:33 PM

you wrote :
"Please check your listener.ora and tnsnames.ora to make sure they entries are correct.
You can also try that from a client machine tnsping(<server name> and IP address) is ok."
I responded :
This is on a brand new installation of Oracle RAC at home on 2 desktop pc's using Jeff Hunter's article on OTN website for testing/playing with Oracle 10 RAC at home. I used netca (network configuration assistant) to configure the listener. So, the listener.ora file should be correct. I only have listener.ora and sqlnet.ora files. No tnsnames.ora file yet.
I don't have another client pc to connect to the server. This is a home based installation NOT connected to internet.
The metalink note suggested a solution but i am not that familiar with linux/unix to know how to enable the interfaces. I just rebooted the boxes to see if that would solve the situation. am going to try again.....
thanks

Similar Messages

Oracle BI 11g: Error at the step - "Creating BI Server System Components"

I am attempting to install Oracle BI 11g on a Windows VM. The installation process completes successfully. However, the configuration process errors out at the step - Creating BI Server System Components. The last entry in the install log is as below:
[2010-09-24T18:26:12.107+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 26] [ecid: 0000Ih3l5E00vlx6wBedMG1Cb79200000H,0] Install handler params :-componentName coreapplication_obis1 -componentType OracleBIServerComponent -biApplicationName coreapplication -fmwConfigPath C:\Middleware\user_projects\domains\bifoundation_domain\config\fmwconfig -appServerUsername <Secure value. Cannot be logged> -appServerPassword <Secure value. Cannot be logged> -appServerAdminPort 7001 -appServerManagedPort 9704 -systemAdministratorUsername <Secure value. Cannot be logged> -systemAdministratorPassword <Secure value. Cannot be logged> -repositoryPassword <Secure value. Cannot be logged> -biServerRepositoryFile SampleAppLite.rpd -biPresentationServicesCatalogName SampleAppLite -biPresentationServicesCatalogZipFileName SampleAppLiteCatalog.zip -biSchedulerSchemaUser <Secure value. Cannot be logged> -biSchedulerSchemaPassword <Secure value. Cannot be logged> -actionFrameworkWorkflowServer http://host-name:7001 -actionFrameworkWorkflowService ANALYTICS -actionFrameworkWorkflowSystem obiaftests -databaseType Microsoft SQL Server -connectString sqlservername:port:db -autoCreatePorts -biServerPort 9703 -biServerMonitorPort 9701 -biPresentationServerPort 9710 -biClusterControllerPort 9706 -biClusterControllerMonitorPort 9700 -biJavaHostPort 9810 -biSchedulerPort 9705 -biSchedulerMonitorPort 9708 -biSchedulerScriptRPCPort 9707 -portRangeStart 9700 -portRangeEnd 10000 -skipDomainProvisioning true
The resource utilization seems to be normal. Netstat confirms that all of the above ports are free. Since there is no explicit error message in the log, we are unable to decipher the exact source for this error.
Virtual Machine details: Intel Xeon @ 2.67 GHz, Windows Server 2003 SP2, 4GB RAM, 50GB HDD, Static IP
Oracle BI Schema DB: MS SQL Server
Any inputs on this error will be greatly appreciated.
Edited by: OBIGuy on Sep 27, 2010 2:37 PM

Hi,
I recenty started instaling OBIEE 11g and got the same error : "Creating BI server system components". I read your solution and would like to know that if this patch is okay to install on a Windows VM (win server 2003 EE, SP2). If yes, after rebooting, do we reinstall ?
I am also getting the following errors:
-Executing: opmnctl start coreapplication_obiccs1
-Executing: opmnctl start coreapplication_obis1
-Executing: opmnctl start coreapplication_obips1
-Executing: opmnctl start coreapplication_obisch1
Thanks in advance.
HG

HT201269 When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a serve

When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

I'm getting a Publish Error reading; Can't create the file "header.jpg." The disk may be damaged or full, or you may not have sufficient access privileges.

I'm getting a publishing error reading; Can't create the file "header.jpg." The disk may be damaged or full, or you may not have sufficient access privileges.
Does anyone know how to proceed?
Thanks!

Try the troubleshooting steps under "FIx iWeb" here...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
Some times all it takes is deleting the .plist to fix this but do the restart and permissions repair if you haven't done this proceedure for a while.

Keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling :(

keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling
I recently bought some new albums and can't play them on my ipod

I just encountered the same problem on my 2 month old MBPro. I found a work around by changing USB ports. As for the actual cause or the reason why that worked, I dont know. The USB port I was using works fine with my phone or other USB devices.

Error: Outlook could not create the work file. Office 2013

I was having issues with Windows 8.1 store apps not working and it was suggested to sync my account licenses. I did that but it did not correct my problem. I then ran the troubleshooter app. The troubleshooter found several issues that it
fixed but I cannot remember what they were.
So here's my problem. Now, when I open Outlook (2013) I get the error "Outlook could not create the work file."
Any suggestions?

Glad to hear that you have found a solution and thank you for sharing it here, it will be helpful to other community members who have same questions.
Cheers,
Steve Fan
TechNet Community Support

Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts. Pleas advise as Blurb has said that it's a LR issue.

Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts. Pleas advise as Blurb has said that it's a LR issue.

Are you behind a firewall or double NAT??
What is the device that is immediately plugged into the main modem or router? Has that one been able to update?
It is plugged in of course isn't it.. no nasty join wireless anywhere??
The best way to work around these sort of problems is to simplify the network.. Plug each device directly into the main router.. by ethernet. You can trigger the firmware upgrade by wireless but use ipad or iphone version of airport utility and see what happens.

TS3694 So I have an iphone4g in recovery mode. followed all the steps to the T. Error pops up in itunes 1602. Prior it was powered off during erase all content and settings mode waiting to reboot

So I have an iphone4g in recovery mode. Followed all the steps to the T. Error pops up in itunes 1602. Prior it was powered off during erase all content and settings mode while waiting to reboot. Now its back to the apple logo. Any ideas if powering it off during the erase all content damaged the software?

You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer.

IWocountered an error while attempting to create the attachment data.

Hi I have created an invoice on pages,then saved it.
When i click on share to send document via email as a PDF file this message comes up "IWORK ENCOUNTERED AN ERROR WHILE ATTEMPTING TO CREATE THE ATTACHMENT DATA" can anybody help it very frustrating,i recently wiped my mac book pro and since i put iwork back on it hasnt worked.
Thanks Tasha

Pages 5 has a complex and unique file bundle format. Designed to make it impossible to extract any contents when the inevitable goes wrong.
GMail, Amazon, Dropbox etc (almost any non-Apple Server software) just don't understand them.
Send the files via Apple Mail.
Peter

I'm trying to import contacts to outlook 2011 from a cvs file. I've followed all the steps, mapped the fields, clicked import -- it shows that it imported my 900 contacts --- but the contact field remains blank and I can't see any information. Help?

I'm trying to import contacts to outlook 2011 from a cvs file. I've followed all the steps, mapped the fields, etc. It appears to import all 900 contacts, but after finishing nothing appears in my contact list. Any ideas on why this is not working?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I am trying to update my itunes and iphone. Everytime I trie comes out a message about 'key access'. I've done all the steps from the support and nothing worked out. I cannot unistall and now I can't open it anymore also. What should i do, please?

I am trying to update my itunes and iphone. Everytime I trie comes out a message about 'key access'. I've done all the steps from the support and nothing worked out. I cannot unistall and now I can't open it anymore also. What should i do, please?

Isn't that only used when a PC will not boot?
What options does booting with this give me?
Thanks
JK MCP
Hi,
USB recovery disk was used to recover your system when it encounter problem. You can try to use it to fix your problem instead reinstall system. However, there is no method to keep your program whenreinstall system.
Roger Lu
TechNet Community Support

Itunes won't recognize my ipod nano 5th gen. it's recognized by the computer, but I get a message from itunes that says an ipod has been detected, but it couldn't be identified properly. i did all of the steps on the ipod assistant. unistalled and reinsta

Itunes will not recognize my Ipod Nano 5th g. It shows up on my computer. But Itunes gives me a message that says "An ipod has been detected, but it could not be identified properly. I did all the steps in the ipod assistant. Unistalled and reinstalled drivers and itunes. restarted ipod and even erased everything. It is recognized by other computers. And itunes recognizes my iphone fine. please help.

Have you restarted your computer? iTunes updated?

I am trying to move my iphoto and itunes to an external hard drive to free up space on my macbook...i have followed the steps to the change itunes media folder location (chosen external hard drive) but my new folder is greyed out so cant continue ?help?

I need to free up space on my macbook pro as hard drive is full!! So with 20 000 photos/video clips and itunes I would like to move this to a external hard drive!
I have followed steps on apple support but when i get to the Change itunes media folder location and chosen external hard drive it will not let me access the new folder option ?? help?

errrrrrrm!
Yes external drive shows up in finder on desk top and can change to in the media folder location thing!
My external hard drive is a WD Elements. I have no idea about permissions to the external? Do i Have to format external hard drive to a mac?
I am trying to follow the steps on the apple support page to transfer files (consolidate library etc) just cant get further down steps as the new folder option is greyed out!
Thanks for you help

I want to see in the tv what i am seeing in my ipad, but i followed all the steps and the code doesnt appears in the tv

I have a apple tv and i wnat to use the airplay. I followed all the steps and the code does not appear in the tv

Hello maicamtz,
The following article provides some useful troubleshooting steps that can hlep get AirPlay working.
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Cheers,
Allen

In sales stage combobox how to display the step of the process coach

On the business talk page, in sales stage combobox how to display the step of the process coach and can be selected, not only sale stage?
thank you.

For example, in salesprocess list, there are SystemSaleProcess, RenewalSalesProcess and DefaultSalesProcess.
And SystemSaleProcess includes grasp of the situation, the first proposal, estimate submitting, the second proposal 4 salesstages.
And grasp of the situation, including needs confirmation, background of the case confirmed, current problem confirmation, schedule and estimate confirmations, current system configuration confirmation 5 steps.
Now in deal page, the deal type selected SystemSaleProcess, the salesstage is grasp of the situation, the first proposal, estimate submitting, the second proposal 4 salesstage can be selected in the salesstage drop-down box.
But if want to choose more than salesstage, would like to choose needs confirmation, background of the case confirmed, current problem confirmation, schedule and estimate confirmations, current system configuration confirmation 5 steps in the salesstage drop-down box, then how to do it?
thank you.

CRS-0215 error in the step:Create the TNS Listener Process

Similar Messages

Maybe you are looking for