CRS-0223: Resource x has placement error.

hi all
i have rac 11.2 rhe5 over asm
database stopped running
as i guess asm has problem. i can read and write files on it but oracle instance cant
i tride to restart resource but i have an eroor
CRS-0223: Resource x has placement error.
can someone help me ?

Dear soso_xuc,
It is impossible even for a highly skilled artificial intelligent device to analyze your problem with the given details below;
+"+
+error occurs+
+saying can't identify some file on asm+
+"+
Regards.
Ogan

Similar Messages

CRS-0223: Resource has placement error, when starting DB instance

Hello All,
Env: 2 node 10.2.0.4 RAC on Solaris 10 SPARC
All of a sudden the DB instance on Node 2 crashed. The alert.log says "Instance terminated by MMAN".
There were no changes recently.
I tried to start it up using srvctl and it failed with
[SHCL1N02]$ srvctl start instance -d SHCL1_PRMY -i SHCL1N02
PRKP-1001 : Error starting instance SHCL1N02 on node myjpsuolicdbd02
CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.SHCL1_prmy.SHCL1N02.inst' has placement error.
[SHCL1N02]$The nodeapps and crs processes are all running happily, the instance alone has a problem.
I tried
(1)Stop nodeapps, Stop CRS, Start CRS => Still instance on node2 didn't come up.
(2)sqlplus / as sysdba, startup => Instance came up, but the ora.SHCL1_prmy.SHCL1N02.inst is still offline.
Below is the error in the crsd.log file.
2009-11-04 10:18:30.627: [ CRSRES][2970821] CRS-1028: Dependency analysis failed because of:
'Resource in UNKNOWN state: ora.SHCL1_prmy.SHCL1N02.inst'
2009-11-04 10:21:23.269: [ CRSRES][2970843] StopResource: setting CLI values
2009-11-04 10:21:23.340: [ CRSRES][2970843] Attempting to stop `ora.SHCL1_prmy.SHCL1N02.inst` on member `myjpsuolicdbd02`
2009-11-04 10:21:30.478: [ CRSAPP][2970843] StopResource error for ora.SHCL1_prmy.SHCL1N02.inst error code = 1
2009-11-04 10:21:30.502: [ CRSRES][2970843] Stop of `ora.SHCL1_prmy.SHCL1N02.inst` on member `myjpsuolicdbd02` succeeded.
2009-11-04 10:21:49.867: [ CRSRES][2970861] startRunnable: setting CLI values
2009-11-04 10:21:49.895: [ CRSRES][2970861] Attempting to start `ora.SHCL1_prmy.SHCL1N02.inst` on member `myjpsuolicdbd02`
2009-11-04 10:21:55.019: [ CRSAPP][2970861] StartResource error for ora.SHCL1_prmy.SHCL1N02.inst error code = 1
2009-11-04 10:22:00.583: [ CRSAPP][2970861] StopResource error for ora.SHCL1_prmy.SHCL1N02.inst error code = 1
2009-11-04 10:22:00.592: [ CRSRES][2970861] X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1803
2009-11-04 10:22:00.593: [ CRSRES][2970861][ALERT] `ora.SHCL1_prmy.SHCL1N02.inst` on member `myjpsuolicdbd02` has experienced an unrecoverable failure.
2009-11-04 10:22:00.593: [ CRSRES][2970861] Human intervention required to resume its availability.Any clue would be much helpful.
TIA,
JJ

The srvctl failed 'coz of my problem(over security).
/u01/app/oracle/product/10.2.0/db_1/log/<node_name>/racg/imon_SHCL1_prmy.log
(thanks to support guy to taking me to this file.)
In this file i saw the below error and it struck me.
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Nov 4 18:59:49 2009
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Enter user-name: ERROR:
ORA-01031: insufficient privileges
Enter user-name: SP2-0306: Invalid option.
2009-11-04 18:59:50.737: [ RACG][176] [28813][176][ora.SHCL1_prmy.SHCL1N02.inst]: Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}]
where <logon> ::= <username>[/<password>][@<connect_identifier>] | /
Enter user-name: Enter password:
ERROR:
ORA-01005: null password given; logon denied
2009-11-04 18:59:50.738: [ RACG][176] [28813][176][ora.SHCL1_prmy.SHCL1N02.inst]: SP2-0157: unable to CONNECT to ORACLE after 3 attempt
s, exiting SQL*PlusI had SQLNET.AUTHENTICATION_SERVICES=(NONE) in the sqlnet.ora, and this stopped the srvctl from logging into the db.
1)Commented the entry in sqlnet.ora
2)crs_stop -f ora.SHCL1_prmy.SHCL1N02.inst
3)crs_stat -u => to confirm that the TARGET and STATE are OFFLINE for ora.SHCL1_prmy.SHCL1N02.inst
4)srvctl start instance -d SHCL1_PRMY -i SHCL1N02
and the instance came up.
They would investigate on regarding the ORA-7445 error.
Regards,
J J

CRS-1028: Dependency ...of: CRS-0223: Resource 'ora.rac1.LISTENER_RAC1.lsnr

I have installed the clusterware and now I'm installing the software database. When the installer try to configure the listener I got error.
Problem in configuration: rac1: LISTENER_RAC1
Listener start failed. Listener may already be running
CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.rac1.LISTENER_RAC1.lsnr'
has placement error
Try again?
Someone can help me?.
Oracle10gR2
Linux Redhat 4 AS 2
Thanks

Hi,
sorry, this is not enough information. Please, check the CRSD.log why the listener could not be started.
Have you checked whether or not the error message is maybe even correct: Is the listener already started?
Sorry, but without some more information, anything else would be guessing, I guess ;-). Thanks,
Markus

CRS-0223: Resource 'ora.xt3xx.ons' has placement error.

All,
I recently downgraded my RAC 10.2.0.4 database to 10.2.0.1 . and after that I am not able to start the database using srvctl . however i am able to start the db manually.
this is the error message
srvctl start database -d RDBE
PRKP-1001 : Error starting instance RDBE1 on node xt33db006
CRS-0215: Could not start resource 'ora.RDBE.RDBE1.inst'.
PRKP-1001 : Error starting instance RDBE2 on node xt33db007
xt33db007:ora.xt33db007.ASM2.asm:
xt33db007:ora.xt33db007.ASM2.asm:SQL*Plus: Release 10.2.0.1.0 - Production on Fri May 16 09:32:30 2008
xt33db007:ora.xt33db007.ASM2.asm:
xt33db007:ora.xt33db007.ASM2.asm:Copyright (c) 1982, 2005, Oracle. All rights reserved.
xt33db007:ora.xt33db007.ASM2.asm:
xt33db007:ora.xt33db007.ASM2.asm:Enter user-name: Connected to an idle instance.
xt33db007:ora.xt33db007.ASM2.asm:
xt33db007:ora.xt33db007.ASM2.asm:SQL> ASM instance started
xt33db007:ora.xt33db007.ASM2.asm:
xt33db007:ora.xt33db007.ASM2.asm:Total System Global Area 130023424 bytes
xt33db007:ora.xt33db007.ASM2.asm:Fixed Size 1976920 bytes
xt33db007:ora.xt33db007.ASM2.asm:Variable Size 102880680 bytes
xt33db007:ora.xt33db007.ASM2.asm:ASM Cache 25165824 bytes
xt33db007:ora.xt33db007.ASM2.asm:ASM diskgroups mounted
xt33db007:ora.xt33db007.ASM2.asm:SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
xt33db007:ora.xt33db007.ASM2.asm:With the Partitioning, Real Application Clusters, OLAP and Data Mining options
xt33db007:ora.xt33db007.ASM2.asm:
xt33db007:ora.xt33db007.ASM2.asm:
xt33db007:ora.xt33db007.ASM2.asm:SQL*Plus: Release 10.2.0.1.0 - Production on Fri May 16 09:32:53 2008
xt33db007:ora.xt33db007.ASM2.asm:
xt33db007:ora.xt33db007.ASM2.asm:Copyright (c) 1982, 2005, Oracle. All rights reserved.
xt33db007:ora.xt33db007.ASM2.asm:
xt33db007:ora.xt33db007.ASM2.asm:Enter user-name:
xt33db007:ora.xt33db007.ASM2.asm:Connected to:
xt33db007:ora.xt33db007.ASM2.asm:Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
xt33db007:ora.xt33db007.ASM2.asm:With the Partitioning, Real Application Clusters, OLAP and Data Mining options
xt33db007:ora.xt33db007.ASM2.asm:
xt33db007:ora.xt33db007.ASM2.asm:SQL> ASM diskgroups dismounted
xt33db007:ora.xt33db007.ASM2.asm:ASM instance shutdown
xt33db007:ora.xt33db007.ASM2.asm:SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
xt33db007:ora.xt33db007.ASM2.asm:With the Partitioning, Real Application Clusters, OLAP and Data Mining options
xt33db007:ora.xt33db007.ASM2.asm:
CRS-0215: Could not start resource 'ora.RDBE.RDBE2.inst'.
please advise.
thanks
Pk

What is the error message you are seeing in CRS & RACG logs related to the database startup.?
What is the STATE & TARGET fields showing up for the database and instances?
Please paste the srvm log for the srvctl command.
export SRVM_TRACE=TRUE
srvctl start database -d RDBE
exit

PRKP-1030 CRS-1007 CRS-0223 while starting TAF Service !

Hello Gurus,
I have CRS 10.1.0.4 with RAC DB 10.1.0.4 on top of Sun cluster 3.1 / Solaris 9 box - 2 nodes.
All nodesapps, DB and instances are online and fine when quering CRS_STAT.
I have added TAF service using DBCA, it gave me an error when it is created.
The same error i get when i try to manulally start it up :
==========================================
$ srvctl start service -d TEST -s TAF_TEST
PRKP-1030 : Failed to start the service TAF_TEST.
CRS-1007: Failed after successful dependency consideration
CRS-0223: Resource ora.TEST.TAF_TEST.cs has placement error.
==========================================
Any ideas ?
Please advise.
Cheers,
Feras

Try deleting the services ,the database resource and its instances ,then add the database again but,
add the database instance node name with lower case ,if it was in upper case.
Also check *372145.1 - Service start fails with CRS-1030 Crs-1007 Crs-0223*

Service creation error CRS-2664:Resource 'ora.prodcro.db' already running

Hi,
Allow me to describe my architecture.
I have 2 2 node rac clusters - site 1 is the primary site and consists of 2 rac instances and site 2 is the standby site where a physical standby database is accessed by 2 rac instances.
Site 1 has services SERVICE1 and SERVICE2 configured and bound to the database instances PROD1 and PROD2.
When I try to created the same services on the standby site i can successfully create them using
srvctl add service -d SOCPRODCRO -s CROSERVICE1 -r PROD1 -a PROD2
srvctl add service -d SOCPRODCRO -s CROSERVICE1 -r PROD2 -a PROD1
However when i try to start them i get the following error
[oracle@mondbop303 {SOCPROD1} ~]$ srvctl start service -d SOCPRODCRO
CRS-2664: Resource 'ora.socprodcro.db' is already running on 'mondbop303'
CRS-2664: Resource 'ora.socprodcro.db' is already running on 'mondbop304'
CRS-2632: There are no more servers to try to place resource 'ora.socprodcro.service1.svc' on that would satisfy its placement policy
Can anyone tell me if they've seen this error before and give me any pointers on anything i'm doing wrong.
Cheers,
George

Hi Jorg,
Firstly thank you very much for taking the time and effort to reply to my post, I really appreciate it.
The Oracle version in use on my client’s site is 11g Release2 (11.2.0.1.0) running on Linux.
Also thank you very much for the pointers (and although i'm trying not to get my hopes up too much in case it doesn't fix the issue) i'm fairly confident that what you've suggested has hit the nail on the head and is the source of my problem i.e although you only explicitly say " on 10g you can create but not start a service on a standby side" it seems that this is also the case for 11g and that the issue lies with me attempting to start the service.
I was thinking that the fact i couldn't start the services on the physical standby site had to be something to do with the fact that it was a physical standby site and that therefore the database was only mounted.
Your pointer made me examine my session logs from last week and i did try to create the service as follows to automatically start when the Oracle Data Guard database role matches the physical_standby role but i got the same error e.g.
[oracle@mondbop303 {SOCPROD1} ~]$ srvctl add service -d SOCPRODCRO -s CROSERVICE1 -r SOCPROD1 -a SOCPROD2 -l physical_standby
[oracle@mondbop303 {SOCPROD1} ~]$ srvctl start service -d SOCPRODCRO
CRS-2664: Resource 'ora.socprodcro.db' is already running on 'mondbop303'
CRS-2664: Resource 'ora.socprodcro.db' is already running on 'mondbop304'
CRS-2632: There are no more servers to try to place resource 'ora.socprodcro.croservice1.svc' on that would satisfy its placement policy
However having read the srvctl documentation again for the add service section you directed me too i.e
=============================================================
"-l {[PRIMARY] |[PHYSICAL_STANDBY] |[LOGICAL_STANDBY] |[SNAPSHOT_STANDBY]}
The service role.
You use this option to indicate that the service should should only be automatically
started when the Oracle Data Guard database role matches one of the specified service roles."
=============================================================
my understanding from this documentation extract is that in fact i should actually be defining the
service i need on the standby cluster using the -l PRIMARY flag and that the service should only
be defined and then it would get automatically started when my standby database transitions to the
PRIMARY role during a switchover or failover. Is that your understanding Jorg?
The only way i can test this obviously is to define the services on my standby cluster, switchover to it, and see if the services are started against the former standby, now primary cluster database and if i can connect to the database using them once the database has failed over.
I'll be back on my customer site on Tuesday and i'll try this then and update the thread to let you know how i get on.
You also asked for more information about my environment:
My node names and (instance names) are as follows
active primary cluster is called cluster1
node names
mondbop001 (Oracle instance SOCPROD1)
mondbop002 (Oracle instance SOCPROD2)
Physical standby cluster is called cluster2
node names
mondbop303 (Oracle instance SOCPROD1)
mondbop304 (Oracle instance SOCPROD2)
Many thanks again.
Regards,
George

I have installed the latest version of iTunes for Windows 8 but when I try to open it, it says Windows has an error and I simply can't open it any longer. Any help is appreciated!

I have installed the latest version of iTunes for Windows 8 but when I try to open it, it says Windows has an error and I simply can't open it any longer. Any help is appreciated!

Hey socestlavie,
Thanks for the question. I understand you are experiencing issues with iTunes for Windows. The following resource may help to resolve your issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M.

DMS BP giving 'requested resource is not available' error

Hello, smart KM people
I'm having a problem with our DMS business package in our EP6 SP16 portal. I configured the DMS repository manager successfully.. and the Document Explorer workset is functional and I'm able to navigate through the folder structure and see the documents listed that are located in the DMS. However, the problem comes in when I click on one of the documents to view it. When I click on the document, I get a "404 - The requested resource is not available" error.
What would be the cause of this? Permissions seem to be set correctly... I'm able to navigate through the folder structure and see the list of documents. If I access the DMS through SAPGUI, I'm able to view the documents without a problem. Has anyone had this problem in the past, or have any hints about what configuration to troubleshoot?
Thanks in advance for the help!
Cheers,
Fallon

Hello Samta -
I followed your steps and am still receiving the same error, so it must not be a problem with the logon ticket. And when I went to the Component Monitor, the DMS Repository Manager looked just fine.
Julian, here's the stack trace I found when viewing the source of the 404 error:
        com.sapportals.wcm.protocol.webdav.server.WDServletException: resource not available
     at com.sapportals.wcm.protocol.webdav.server.WDGetHandler.setContentLocation(WDGetHandler.java:756)
     at com.sapportals.wcm.protocol.webdav.server.WDGetHandler.internalHandle(WDGetHandler.java:495)
     at com.sapportals.wcm.protocol.webdav.server.WDGetHandler.handle(WDGetHandler.java:253)
     at com.sapportals.wcm.protocol.webdav.server.WDServlet.doGet(WDServlet.java:777)
     at com.sapportals.wcm.protocol.webdav.server.WDServlet.service(WDServlet.java:458)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
     at com.sapportals.wcm.portal.proxy.PCProxyServlet.service(PCProxyServlet.java:331)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
     at com.sapportals.portal.prt.core.broker.ServletComponentItem$ServletWrapperComponent.doContent(ServletComponentItem.java:110)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java(Compiled Code))
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code))
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code))
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java(Compiled Code))
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code))
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code))
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:545)
     at java.security.AccessController.doPrivileged1(Native Method)
     at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java(Compiled Code))
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java(Compiled Code))
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Inlined Compiled Code))
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Compiled Code))
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java(Compiled Code))
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java(Compiled Code))
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java(Inlined Compiled Code))
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java(Compiled Code))
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java(Compiled Code))
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
     at java.security.AccessController.doPrivileged1(Native Method)
     at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
Any hints from this? We keep running up against brick walls with this problem.
Thanks for your help!

ITunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved? What information is available besides the "learn more" option that does not deal with the problem?

iTunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved? What information is available besides the "learn more" option that does not deal with the problem?
Many people have the same problem. However, there is little or nothing readily available to users. This problem has existed for two or more years. Does anyone have anything to offer about this disturbing problem?

Thanks for the suggestion kcell. I've tried both versions
9.0.115 and 9.0.124 and both fail with the policy permission error.
I also tried with and without your crossdomain.xml file but
with the same result. It looks like this file is intended for URL
policy, instead of socket policy. Recently Adobe separated the two.
When I run with the files installed on my dev PC, it does
work, which makes sense because the flash player isn't loaded from
an unknown domain.
I did get one step closer. If a crossdomain.xml in the server
root exists and the socketpolicy file is loaded from the app folder
then the first two warnings disappear. The logs now show:
OK: Root-level SWF loaded:
https://192.168.2.5/trunk/myapp.swf
OK: Policy file accepted: https://192.168.2.5/crossdomain.xml
OK: Policy file accepted:
https://192.168.2.5/trunk/socketpolicy.xml
Warning: Timeout on xmlsocket://192.168.2.5:843 (at 3
seconds) while waiting for socket policy file. This should not
cause any problems, but see
http://www.adobe.com/go/strict_policy_files
for an explanation.
Warning: [strict] Ignoring policy file with incorrect syntax:
xmlsocket://192.168.2.5:993
Error: Request for resource at xmlsocket://192.168.2.5:993 by
requestor from https://192.168.2.5/trunk/myapp.swf is denied due to
lack of policy file permissions.
Which basically says, everything is okay, but you stay out
anyway.
PS: I found the XML schema files here:
http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_02.html
and the socket policy schema:
http://www.adobe.com/xml/schemas/PolicyFileSocket.xsd.
UPDATE: When serving up the policy file on port 843 using the
example perl script then the socket connection seems to be accepted
and the connect succeeds. After that flex hangs trying to logon to
the IMAP server.

Srvctl start listener -n rac1 gives CRS-1028 and CRS-0223

Boot up 2 linux 10.2.0.1.0 RAC nodes.
everything starts except listeners
srvctl start listener -n rac1
or
srvctl start listener -n rac2
gives
CRS-1028
CRS-0223
However, if you start listeners manually, using
lsnrctl start listener_rac1
or
lsnrctl start listener_rac2
they start right up. Moreover, once you have started them manually, the srvctl start listener commands now work, both stopping and starting the listeners with srvctl now works. However, when reboot systems, again srvctl must be "primed" for starting listener by doing one "manual" startup of listener.
Any thoughts on what is causing this behavior?
Thanks!

Alan, thanks - excellent advice. However, I just ended up redoing the entire install and this of course fixed the problem :-)
Thanks for your reply, Gil
PS also, btw I use the crsstat script instead of the crs_stat for better formatting, i.e. this script (which I named crsstat) lives in $ORA_CRS_HOME/bin. Also, note I am not the author of this script, I downloaded it from Metalink:
#!/usr/bin/ksh
# Sample 10g CRS resource status query script
# Description:
# - Returns formatted version of crs_stat -t, in tabular
# format, with the complete rsc names and filtering keywords
# - The argument, $RSC_KEY, is optional and if passed to the script, will
# limit the output to HA resources whose names match $RSC_KEY.
# Requirements:
# - $ORA_CRS_HOME should be set in your environment
RSC_KEY=$1
QSTAT=-u
AWK=/usr/bin/awk # if not available use /usr/bin/awk
# Table header:echo ""
$AWK \
'BEGIN {printf "%-45s %-10s %-18s\n", "HA Resource", "Target", "State";
printf "%-45s %-10s %-18s\n", "-----------", "------", "-----";}'
# Table body:
$ORA_CRS_HOME/bin/crs_stat $QSTAT | $AWK \
'BEGIN { FS="="; state = 0; }
$1~/NAME/ && $2~/'$RSC_KEY'/ {appname = $2; state=1};
state == 0 {next;}
$1~/TARGET/ && state == 1 {apptarget = $2; state=2;}
$1~/STATE/ && state == 2 {appstate = $2; state=3;}
state == 3 {printf "%-45s %-10s %-18s\n", appname, apptarget, appstate; state=0;}'

CRS-1019 Resource ora.devdb.devdb1.inst (application) cannot run on rac2

I run a CRS upgrade from 10.2.0.1 to 10.2.0.3. The process runned ok but instance devdb1 on rac1 of the RAC does not start.
crs_stat -t
ora.devdb.db ONLINE ONLINE rac1
ora.devdb.devdb1.inst ONLINE OFFLINE
ora.devdb.devdb2.inst ONLINE ONLINE rac2
I tried the following, without success:
srvctl remove database -d devdb -f
crs_unregister ora.devdb.db
srvctl remove instance -d devdb -i devdb1
srvctl remove instance -d devdb -i devdb2
srvctl add database -d devdb -o $ORACLE_HOME
srvctl add instance -d devdb -i devdb1 -n rac1
srvctl add instance -d devdb -i devdb2 -n rac2
srvctl stop database -d devdb
srvctl start database -d devdb
When I run:
srvctl start instance -d devdb -i devdb1
PRKP-1001: Error starting instance devdb1 on rac1
CRS-0215 Could not start resource 'ora.devdb.devdb1.inst'
When I run:
crs_start ora.devdb.devdb1.inst
Attempting to start 'ora.devdb.devdb1.inst' on member 'rac1'
Start of 'ora.devdb.devdb1.inst' on member 'rac1' faileld.
rac2: CRS-1019 Resource ora.devdb.devdb1.inst (application) cannot run on rac2
CRS-0215 Could not start resource ora.devdb.devdb1.inst
When I run on rac1 as oracle:
sqlplus /nolog
conn / as sysdba
startup
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/01/app/oracle/product/10.2.0/db_1/dbs/initdevdb1.ora'
Does anyone have some tips to help?
Regards
Cristian

Hi Cristian,
Maybe you have already solved your issue.
Have you checked if the necessary pfile (initdevdb1.ora) is in the directory /01/app/oracle/product/10.2.0/db_1/dbs? if it is there then you might need to check the permissions on the path.
I suppose you did the upgrade using a new binary home for your 10.2.0.3 version where the required parameter file(s) is/are still there in $OLD_ORACLE_HOME/dbs.
If so, then copy them from there to the new $ORACLE_HOME/dbs then give it a try.
Hope this helps.
Regards,
Jozsef

Failed to load resource: Frame load interrupted error

Whenever I click on a link to download a browser extension or anything in Safari it looks like the item is downloading but then it quits. There is a 'Failed to load resource: Frame load interrupted' error in the web developer console. In regards to the Safari browser extension, the header is set to 'application/octet-stream'. Has anyone seen this? It is happening in Safari 6.0 and 6.1.

You can't download any file from any web page?

The Resource Pool has already been destroyed - File to JDBC Scenario

Hi,
Error : "Error when attempting to get processing resources: com.sap.aii.af.service.util.concurrent.ResourcePoolException: The resource pool has already been destroyed"
Scenario : This error is occurring for the File to JDBC Scenario .
Could you please let me know why am getting this error and solution to resolve this error..
Thanks in Advance!!
Regards,
Sekhar

Hi ,
Thanks for the replies..
Just to add to have more clarity on the error for the scenario
Scenario : This error is occurring for the File to JDBC Scenario
The Scenario has a BPM involved.The synchronous send step within the BPMsends the data to the JDBC receiver adapter.The response from the JDBC
adapter is throwing the below error.
Thanks,
Sekhar

Placement errors - what are they?

Hi,
Can anyone tell me what a 'placement error' is?? Some of my Cluster services (gsd, ons, listeners) are failing to start after a reboot, and I keep seeing mention of placement errors.
Thanks,
Thom
Message was edited by:
user470053

In case this helps anyone else...
I fixed my problem by stopping and starting the CRS on the rebooted node
# ./crsctl stop crs
# ./crsctl start crs
I was then able to start the nodeapps without it complaining about 'placement errors'
# ./srvctl start nodeapps -n raclinux1
Thom

The "Logical AND" functoid has place holders. Replace these with appropriate links or constants.

Hi,
I am getting the below error in the BizTalk Mapper when trying to compile the application.
The "Logical AND" functoid has place holders. Replace these with appropriate links or constants.
Kindly advice the cause of the error.
Thanks
Regards, Vivin.

Hi Morten,
I found the issue!! There were two AND functoids with a invalid input parameter and I removed those and the error disappeared.
Thanks for the helping in finding the cause.
Regards, Vivin.

CRS-0223: Resource x has placement error.

Similar Messages

Maybe you are looking for