CRS could not start after reboot

I installed oracle 10g R2 RAC on RHEL4 U4 with 2 nodes. It runs fine on 2 nodes (without reboot after installation). But when I rebooted one node, I found that the CRS daemon could not start automatically. The boot menu show "Starting CRS" [OK]. The "init.crs start" command won't init the CRS daemon.
$ ./crs_stat
CRS-0184: Cannot communicate with the CRS daemon.
SQL> conn / as sysdba
Connected to an idle instance.
SQL> startup
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA1/RAC/spfileRAC.ora'
ORA-17503: ksfdopn:2 Failed to open file +DATA1/RAC/spfileRAC.ora
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
$ /etc/init.d/init.crs start
Startup will be queued to init within 90 seconds.
$ cat /etc/inittab
id:5:initdefault:
# Run xdm in runlevel 5
x:5:respawn:/etc/X11/prefdm -nodaemon
h1:35:respawn:/etc/init.d/init.evmd run >/dev/null 2>&1 </dev/null
h2:35:respawn:/etc/init.d/init.cssd fatal >/dev/null 2>&1 </dev/null
h3:35:respawn:/etc/init.d/init.crsd run >/dev/null 2>&1 </dev/null
$ ls /etc/rc5.d
K01tog-pegasus K35smb K85mdmpd S05openibd S18rpcidmapd S55sshd S96readahead
K02NetworkManager K35vncserver K87auditd S06cpuspeed S19rpcgssd S56rawdevices S97messagebus
K05saslauthd K35winbind K87ipmi S08arptables_jf S19vmware-tools S56xinetd S97rhnsd
K10dc_server K40smartd K89netplugd S08iptables S25netfs S58ntpd S98cups-config-daemon
K10psacct K50ibmasm K90bluetooth S09isdn S26apmd S80sendmail S98haldaemon
K12dc_client K50netdump K94diskdump S10network S26lm_sensors S85gpm S99local
K15httpd K50snmpd K96pcmcia S12syslog S27vasd S90crond
K20nfs K50snmptrapd S00microcode_ctl S13irqbalance S28autofs S90xfs
K24irda K50tux S01sysstat S13portmap S29oracleasm S95anacron
K25squid K73ypbind S04readahead_early S14nfslock S44acpid S95atd
K30spamassassin K74nscd S05kudzu S15mdmonitor S55cups S96init.crs
Do I miss any configuration to initialize the CRSD at boot?
thanks, ezlee

did you run cluster verification utility for node connectivity?
http://docs.oracle.com/cd/E11882_01/rac.112/e16794/cvu.htm#autoId19
also check the logs ad $GRID_HOME/log/<hostname>/...
starting with alert.log, then the ones its referencing

Similar Messages

Help, OracleDBConsoleasdb could not start after rebooting of server.

We have Oracle AS 10g R2 with infrastructure and portal. What can I do?
Mbw
Elena

Which of them?
F.exp. Oracleim1ASControlsrvc.log contain:
01/14/08 06:04:05 Recieved ServCtrlHdlr command, 5
01/14/08 06:04:05 Stopping iasconsole
01/14/08 06:04:05 Launching stop EMD process...
01/14/08 06:04:06 Waiting for stop EMD process to exit. numRetries=74
01/14/08 06:04:11 Waiting for stop EMD process to exit. numRetries=73
01/14/08 06:04:16 Waiting for stop EMD process to exit. numRetries=72
01/14/08 06:04:16 Stop process has exited with exitCode: 0
01/14/08 06:04:16 Waiting for emwd process to exit. numRetries=74
01/14/08 06:04:16 Watchdog process exited with exit code -1
01/14/08 06:04:16 Signal Shutdown event.
01/14/08 06:04:16 Shutdown thread exited.
01/14/08 06:04:16 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
-------------- [Oracleim1ASControl] ------------
EMDROOT=D:\oracle\im
ORACLE_HOME=D:\oracle\im
EMDSTATE=D:\oracle\im
CONSOLE_CFG=iasconsole
TRACE_LEVEL=16
TIMEOUT=15
01/14/08 06:04:56 Start pending...
01/14/08 06:04:56 Verifying iasconsole is not started already. Command line "D:\oracle\im\bin\emctl.bat" istatus iasconsole
01/14/08 06:05:00 iasconsole launch commandline is "D:\oracle\im\bin\emctl.bat" istart iasconsole
01/14/08 06:05:00 Tracking process launch...
01/14/08 06:05:33 Received exitCode 1 from emctl istatus
01/14/08 06:05:43 Did not hear back from emctl istatus.
01/14/08 06:05:43 Waiting a further 5 secs...
01/14/08 06:05:48 Did not hear back from emctl istatus.
01/14/08 06:05:48 Waiting a further 5 secs...
01/14/08 06:05:53 Did not hear back from emctl istatus.
01/14/08 06:05:53 Waiting a further 5 secs...
01/14/08 06:05:58 Did not hear back from emctl istatus.
01/14/08 06:05:58 Waiting a further 5 secs...
01/14/08 06:06:04 Did not hear back from emctl istatus.
01/14/08 06:06:04 Waiting a further 5 secs...
01/14/08 06:06:09 Did not hear back from emctl istatus.
01/14/08 06:06:09 Waiting a further 5 secs...
01/14/08 06:06:14 Did not hear back from emctl istatus.
01/14/08 06:06:14 Waiting a further 5 secs...
01/14/08 06:06:19 Did not hear back from emctl istatus.
01/14/08 06:06:19 Waiting a further 5 secs...
01/14/08 06:06:24 Did not hear back from emctl istatus.
01/14/08 06:06:24 Waiting a further 5 secs...
01/14/08 06:06:29 Did not hear back from emctl istatus.
01/14/08 06:06:29 Waiting a further 5 secs...
01/14/08 06:06:34 Did not hear back from emctl istatus.
01/14/08 06:06:34 Waiting a further 5 secs...
01/14/08 06:06:39 Did not hear back from emctl istatus.
01/14/08 06:06:39 Waiting a further 5 secs...
01/14/08 06:06:44 Did not hear back from emctl istatus.
01/14/08 06:06:44 Waiting a further 5 secs...
01/14/08 06:06:49 Did not hear back from emctl istatus.
01/14/08 06:06:49 Waiting a further 5 secs...
01/14/08 06:06:54 Did not hear back from emctl istatus.
01/14/08 06:06:54 Waiting a further 5 secs...
01/14/08 06:07:00 Did not hear back from emctl istatus.
01/14/08 06:07:00 Waiting a further 5 secs...
01/14/08 06:07:05 Did not hear back from emctl istatus.
01/14/08 06:07:05 Waiting a further 5 secs...
01/14/08 06:07:10 Did not hear back from emctl istatus.
01/14/08 06:07:10 Waiting a further 5 secs...
01/14/08 06:07:15 Did not hear back from emctl istatus.
01/14/08 06:07:15 Waiting a further 5 secs...
01/14/08 06:07:20 Did not hear back from emctl istatus.
01/14/08 06:07:20 Waiting a further 5 secs...
01/14/08 06:07:25 Did not hear back from emctl istatus.
01/14/08 06:07:25 Waiting a further 5 secs...
01/14/08 06:07:30 Did not hear back from emctl istatus.
01/14/08 06:07:30 Waiting a further 5 secs...
01/14/08 06:07:32 Received exitCode 3 from emctl istatus
01/14/08 06:07:32 iasconsole started

My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.

My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.
I tried to connect to iTune hoped to restore the system but iTunes did not reconige it.

here is link to the apple product feedback website:
http://www.apple.com/feedback/

Windows could not start after SP-3 update

Windows could not start after SP-3 update
After I updated Apple Software Update to 2.1 and then updated to BC 2.1 successfully I D/L & Installed SP-3. Even got the Wizard & seemed to go OK. Got prompt “Installation Complete, Need to restart.” I did. I got a black screen with text:
Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
I used the power button to shut down Windows & then booted into Mac OS X normally.
I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP installation CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
Has anyone done this with a similar error & successfully repaired their Windows installation? I don’t know if this is a Boot Camp problem or not. XP SP 2 had been working just fine.
Thanks for any help.

Solved! It apparently was NOT a Boot Camp Issue. The fix was to obtain the file “biosinfo.inf” and from the Mac side, go into my WIndows XP HDD & add that file to: Windows/INF folder. (Yes, it was missing). Why my XP SP2 installation worked fine w/o this file is beyond my knowledge. Perhaps this file is needed only when doing a type of major update yet not needed for simply starting & running Windows? There are web pages stating that upgrading to SP 3 can cause this problem if using 3rd party software such as Norton Anti-Virus (I don’t have that but DO have Zone Alarm). There are also various complicated, long fixes out there. For me, replacing that file did the trick & everything seems fine now. (As far as where one “obtains” that file--long story)
Message was edited by: growler62000

Firefox will not start, after reboot.

For a few months now Firefox will not start after I reboot my computer. In order to get it to start I click the exe then must go into task manager kill it, click the exe again, kill it again then, from there it will typically start, but sometimes it may take one or two more trys. When clicking the exe firefox will appear in the task manager under processes but will will start with ~7% CPU usage, then quickly drop to zero every time until it does actually open and start. I have ran a full system recovery and started anew after reinstalling mozilla several times failed to fix the problem. I run virus and spyware checks often and come up clean, and also run Chrome as a default browser.
== This happened ==
A few times a week
== Around the time 3.5 was released

Hello Tom.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

PC Suite 6.86.9.3 does not start after reboot

Hi!
I have some strange problems with the PC Suite. After the first install everything is working well but after a reboot the PC suite is not starting after double click on the desktop icon.
But i can install tools on the phone or start some of the suite tools. Only the PC Suit does not run.
The repair function of the installer does not bring any results. The only way ist to deinstall the suit and all drivers and to clear all remainig nokia registry entries. After that I can install the suite again and it will run again... until I reboot the system. And so on, and so on...
Does any one have an idea how to solve my problem?
Thanks
Michael

Actually it does not work on one Windows XP SP3 computer, but it does work on another Windows XP SP3 computer.
Probably this is a .NET application, as I have encountered several .NET applications that do NOT work on some specific computers.

CRS not starting after reboot

Hi,
I have just installed RAC in a test environment using vmware server 2. I have Oracle Enterprise Linux 5 and used oracle 11g (11.2.0.1). I have not installed database software yet and just installed oracle grid infrastructure.
When i restart any of the node and issue "crsctl check crs", i see following output.
[root@rac2 ~]# crsctl check crs
CRS-4638: Oracle High Availability Services is online
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4529: Cluster Synchronization Services is online
CRS-4533: Event Manager is online
Now, "crs_stat -t" also does not work unless i manually start the crs daemon using "crsd start" command. Why crs daemon is not starting automatic unlike 10g RAC. Is it normal behaviour and what is proper way of making this daemon start automatic.
Salman

I am assuming you are running crsctl check crs immediately after reboot. It takes bit of time for crs to start and you do not have to start it manually. By default crs is started automatically and if for some reason you disabled it, you can enable it by using "crsctl enable crs" .
You can also check the status of individual services by using:
# crsctl check crsd

DBConsole not starting after reboot.

I am having issue with starting of dbconsole service . This has been working for a long time .
We did a reboot of the server. After the reboot , the DBConsole is not starting....
Any help is appreciated .... Thanks in Advance.
D:\>set ORACLE_SID=ORDBPD
D:\>set ORACLE_HOME=D:\app\Oracle\product\11.2.0\dbhome_1
D:\>emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
https://TCS-DB01.SE-Directory.com:5500/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ...The OracleDBConsoleor
dbpd service is starting.............
The OracleDBConsoleordbpd service could not be started.
A service specific error occurred: 2.
More help is available by typing NET HELPMSG 3547.
Here are the entries from the log file....
EMDROOT=D:\app\Oracle\product\11.2.0\dbhome_1
ORACLE_HOME=D:\app\Oracle\product\11.2.0\dbhome_1
EMSTATE=D:\app\Oracle\product\11.2.0\dbhome_1\TCS-DB01.SE-Directory.com_ordbpd
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=30
01/04/11 11:02:23 Job Process API is available
01/04/11 11:02:23 Start pending...
01/04/11 11:02:23 Verifying dbconsole is not started already. Command line "D:\app\Oracle\product\11.2.0\dbhome_1\bin\emctl.bat" istatus dbconsole
01/04/11 11:02:23 Service Job object queried for basic limit information
01/04/11 11:02:23 Service Job object set with JOB_OBJECT_LIMIT_BREAKAWAY_OK limit
01/04/11 11:02:24 dbconsole launch commandline is "D:\app\Oracle\product\11.2.0\dbhome_1\bin\emctl.bat" istart dbconsole
01/04/11 11:02:24 Tracking process launch...
01/04/11 11:02:54 dbconsole exited with retCode 2.
01/04/11 11:02:54 Check D:\app\Oracle\product\11.2.0\dbhome_1\sysman\log\OracleDBConsoleordbpd.nohup for details

user11142794 wrote:
01/04/11 11:02:54 Check D:\app\Oracle\product\11.2.0\dbhome_1\sysman\log\OracleDBConsoleordbpd.nohup for detailsWhat's in this file?

SSH does not start after reboot

Hi, I have a problem with my sshd daemon. I have updated my OS, I have changed the .pacnew files and tested service with "systemctl start sshd.service" and it worked good. I have run command "systemctl enable sshd.service" and command executed good. But after reboot service does not start.
I have run "systemctl status sshd.service" and result is that service is loaded, but in Activa line it is inactive (dead).
I dont know what is happening, why is it inactive if it is loaded?
Thank you for you help.

These are outputs:
$ systemctl status sshd.service
* sshd.service -OpenSSH Daemon
Loaded: loaded (/usr/lib/systemd/system/ssh.service: enabled)
Active: inactive (dead)
$ systemctl status sshd.socket
* sshd.socket
Loaded: loaded (/usr/lib/systemd/system/ssh.socket: enabled)
Active: active (listening) since Fri 2014-05-30 09:57:52 COT; 12min ago
Listen: [::]:22 (Stream)
Accepted: 0; Connected: 0
It looks that socket is working, but service isn't. I have reviewed "journalctl -b" and sshd service isn't shown it.
Last edited by mams827 (2014-05-30 15:25:18)

Admin Applet could not start after upgrade to 11g

I recently performed an in-place upgrade of UCM 10g to 11g following the UCM Upgrade documentation.
After the upgrade, the Admin Applet could not run using the browser.
I have tried on both IE8 and FireFox.
Let's use Repository Manager as an example.
I click on the icon in the Admin Applet page in the browser, an error message pop-up:
apUnableToStartApplication(RepoMan) apFailedToInitialize syFileUtilsFileNotFound((null))
I tried to trace the error using the Server Output with the option "applet", but have no luck.
Using the option "applet", the Server Output is blank.
In the Java Console, I have the following error message:
Caused by: intradoc.data.DataException: !apFailedToInitialize
at intradoc.apps.shared.AppLauncher.init(AppLauncher.java:177)
at IntradocApp.createFrame(IntradocApp.java:329)
*... 27 more*
Caused by: intradoc.common.ServiceException: !syFileUtilsFileNotFound,(null)
at intradoc.client.UrlClient.doURLRequest(UrlClient.java:298)
at intradoc.client.UrlClient.request(UrlClient.java:107)
at intradoc.apps.shared.AppLauncher.executeService(AppLauncher.java:768)
at intradoc.apps.shared.AppLauncher.executeService(AppLauncher.java:714)
at intradoc.apps.shared.AppLauncher.initConfig(AppLauncher.java:312)
at intradoc.apps.shared.AppLauncher.init(AppLauncher.java:169)
*... 28 more*
I was able to start the applets in the server running as standalone in the directory "<domain_root>/ucm/cs/bin".
Could someone help, please?

Highly odd.
Caused by: intradoc.common.ServiceException: !syFileUtilsFileNotFound,(null)at intradoc.client.UrlClient.doURLRequest(UrlClient.java:298)>
That bit of code logic looks for only either a 403 or a 404 response code (403 being "forbidden" and 404 being "page not found"). The system is explicitly getting a 404 error passed to it, but the download test you just did shows that the file exists, and can be downloaded.
I have to wonder if the jar is messed up. My file size is 3.16 MB (3,318,627 bytes) for 11g. Yours close to that?
Also, try dumping your Java temp cache on your local machine. This is not the same as your temporary internet files. You have to go into the Java console control in Windows Control Panel to do it.

Portal do not start after rebooting

Hi!!
I succesfully installed Oracle 9iAS and Portal in a win 2000.But when I reboot the machine de Database do not start this message appears:
Entry Point Not Found: The procedure entry point snlpcgtsrvbynm could not be located in the dynamic link library oranl8.dll.
The IAS start but the database don4t. I find in metalink a bug that seems the same 14040057 but instead this message appears with the HTTP server appears with the Database.
Could anyone help me?
Thanks in advance

Hi !!
i give you more details!!
I have 8.1.6 Database and Win 2000 installed. All was right i have restarted the machine several times until i have installed languaje settings to Portal to add a new languaje and have launch de script wwvseedus.sql and langinst.cmd. and it was fine i could see the Portal in Spanish, but when i have reboot the machine de database do not start. The following message appears when i try to connect to de Oracle Server Manager.
Message 4505 not found; No message file for producto=RDBMS, facility=MGR.
Then when i try to connect to the Portal Home Page this message appears:
TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network transport problems.
Verify that the TNS name in the connectstring entry of the DAD for this URL is valid and the database listener is running.
Anyone have any idea how can i solve this problem??
Thanks!!!!!

E65 could not start after installed new firmware

Hi,
Yesterday I conected to PC suite and updated firmware from 2.0.... to 3.0... > Everything went through smoothly. After I restored all information from back up files of PC suite, then I could not use my phone any more. Everytime I try to restart my phone, the message " Phone start-up failed. Contact to retailer "
Could any one help me to make my phone back to work, please ? Thanks a lotttttt

See this.
/discussions/board/message?board.id=communicators&thread.id=31577

SCVMM Service (2012) does not start after reboot VMM-Server

VMM-Server: WIN 2008 R2 Standard x64
SQL-Server: 2008 R2 x64
Hi,
after reboot VMM-Server we get the following error messages from the EventViewer when starting the VMM-service:
Event ID: 19999
Virtual Machine Manager (vmmservice:130936) has encountered an error and needed to exit the process. Windows generated an error report with the following parameters:
Event:VMM20
P1(appName):vmmservice
P2(appVersion):3.0.6005.0
P3(assemblyName):Remoting
P4(assemblyVer):3.0.6019.0
P5(methodName):M.V.R.IndigoSerializableObject.BuildKnownAssemblyTypes
P6(exceptionType):S.Reflection.ReflectionTypeLoadException
P7(callstackHash):17ca
and
Event ID: 1
System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
at System.Reflection.Module._GetTypesInternal(StackCrawlMark& stackMark)
at System.Reflection.Assembly.GetTypes()
at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.BuildKnownAssemblyTypes(Assembly assembly)
at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.InitializeKnownTypesCache(List`1 assembliesToExamine)
at Microsoft.VirtualManager.Engine.Remoting.IndigoServiceHost.InitializeKnownTypesCache()
at Microsoft.VirtualManager.Engine.VirtualManagerService.OnStart(String[] args)-2146232830
Thanks in advance!

You would have to post the same in the XI forums for more relevant answers.
Please close this thread and open a new on in the XI forums or send a mail to
[email protected]
tp have it moved.

OSX will not start after reboot from single user mode

Hello,
Yesterday my iBook G4 was only starting in BASH mode. I've looked at discussions describing Kernel Panic and have followed the advice posted to the following post:
http://discussions.apple.com/message.jspa?messageID=1553062#1553062
When I reboot I get past the language setup and the boot progress screen/progress bar gets almost complete before going to a continuously stalling/reloading blue screen.
When I try the command:
rm /var/db/.AppleSetupDone
described in one of the responses I get a 'No such file or directory' message
I assume that as when I try:
cd /System/Library/CoreServices/Setup\ Assistant.app/Contents/MacOS
It returns '-rwxr-xr-x 1 root wheel 58912 16 Aug 21:10 Setup Assistant'
it is the file that is missing.
As the discussion thread I was following seemed to go off on a bunch of other tangents (and was completed), I am hoping somebody might have suggestions for my specific problem under this new discussion.

Welcome To  Discussions Kongxyz!
It will help if you first post some background info.
"...only starting in BASH mode."
Explain exactly what was happening, and what the screen displayed.
Exactly which model iBook G4 is it?
What is the Processor speed?
What size is the Hard Drive, and how much space is available?
How much RAM is installed, and is it original or added?
Which version number of Panther 10.3.x is installed
What peripherals do you have connected? A keyboard, mouse, printer, external drive or modem, router, etc?
What happened between the last time the iBook started successfully, and when it didn't?
Have you made any changes, like upgrading the system, updated or installed any applications or programs, etc?
Have there been any unusual occurences, like freezes, crashes, power outages, etc?
Are you able to startup from the system install disc to run Disk Repair?
Have you run Repair Permissions?
Instructions posted below.
Is the Mac shutdown overnight, or does it run 24/7?
Have you ever run any routine Maintenance procedures?
THESE ARE THE STEPS FOR USING DISK UTILITY TO REPAIR YOUR HD
1.Insert the System Install disk, Mac OS X CD-ROM disk, or Restore DVD disk, then restart the computer while holding the C key. Use the System disk, of the OS, that is currently installed.
2.Once started up from CD or DVD, on the Menubar at the top of the screen, choose Disk Utility from the Installer contextual menu.
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
3.Click the First Aid tab.
4.Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5.Select your Mac OS X volume, if necessary.
6.Click Repair. If DU reports errors it has fixed, re-run Repair Disk until no errors are reported.
7.Repeat steps 5 & 6, but select the Hard Drive this time. It's usually the first listed with the manufacturer's model number. Make note of the S.M.A.R.T. status.
8.When finished, select Quit Disk Utility from the Installer menu.
9.Select Quit Installer from the Installer menu.
10.In the resulting pop-up window, choose restart.
11.After the computer has restarted, you can eject the CD.
TO REPAIR PERMISSIONS ON THE STARTUP DISK
1.Open Disk Utility, located in Applications/Utilities, and select the startup disk in the left column.
2.Click First Aid.
3.Click Verify Disk Permissions to test permissions or Repair Disk Permissions to test and repair permissions. (I never "Verify". Just run "Repair".)
Rerun RP until the only messages reported, are listed here Spurious Permissions Errors Using: 10.3.x, authored by Michael Conniff.
When "Repair Permissions" is complete. Quit "Disk Utility".
ali b

Lion installer does not start after reboot

When I run the lion installer App, it does its thing, copying files for ~3 minutes,
then reboots the computer.
After the computer reboots, Instead of the expected 'install' phase, I am directly returned to the login screen, exacly as a normal boot, and 'About this mac' confirms I am still running 10.6.8
One of my collegues tried extracting the dmg from the installer app, and turned it into a bootable usb disk
Booting from this produced a grey screen, with the timer animation at the bottom, and a grey barred circle just above center.
After half an hour without any indication of progress or disk activity on this screen, I hard-power-off'd the machine, and powered on, straight back to the normal 10.6.8 login screen.
My mac is an early 2011 13" macbook pro.
Can someone please tell me why lion refuses to install, or how to find out? and how to fix it?
Thank you
Nick.

I just spotted the following in the console:
Install Mac OS X Lion[368] Error loading /Users/nick/Desktop/Install Mac OS X Lion.app/Contents/PlugIns/IACoreStorage.IABundle/Contents/MacOS/IACoreStorage: dlopen(/Users/nick/Desktop/Install Mac OS X Lion.app/Contents/PlugIns/IACoreStorage.IABundle/Contents/MacOS/IACoreStorage, 265): Library not loaded: /usr/lib/libcsfde.dylib
Referenced from: /Users/nick/Desktop/Install Mac OS X Lion.app/Contents/PlugIns/IACoreStorage.IABundle/Contents/MacOS/IACoreStorage
Reason: image not found
Does this mean a file is missing from my installer?

CRS could not start after reboot

Similar Messages

Maybe you are looking for