CRS Installation failure

CRS installation failed with the following error. The log file does not have any details for the cause of the failure ...
Error While copying directory /u01/app/oracle/product/crs_1 with exculde file list 'null' to nodes
'prd2':[PRKC-1002; all the submitted commands did not execute successfully]
prd2:
/bin/tar:/lib/libocrutl10.a: file shrank by 254 bytes; padding with zeros
/bin/tar:Error exit delayed from previous errors
refer to '/u01/app/oracle/oraInventory/logs/installActionsXXXXXXXX.log' for details. you may fix the errors on the required remote nodes.Refer to install guide for error recovery.
What could be the reson for this failure?

Hi,
I have configured NFS and started installing CRS. At the end of installation, I ran the script /d01/crs/oracle/product/10.2.0/crs/root.sh from the Node1. It was successful.
But while running the /d01/crs/oracle/product/10.2.0/crs/root.sh from the Node 2 from root user, it is hanging after displaying the message "Startup will be queued to init within 90 seconds."
I am struck at this point. Please help me.
/d01/crs/oracle/product/10.2.0/crs/root.sh
WARNING: directory '/d01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/d01/crs/oracle/product' is not owned by root
WARNING: directory '/d01/crs/oracle' is not owned by root
WARNING: directory '/d01/crs' is not owned by root
WARNING: directory '/d01' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/d01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/d01/crs/oracle/product' is not owned by root
WARNING: directory '/d01/crs/oracle' is not owned by root
WARNING: directory '/d01/crs' is not owned by root
WARNING: directory '/d01' is not owned by root
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
assigning default hostname jces401 for node 1.
assigning default hostname perf1 for node 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: jces401 jces401-priv jces401
node 2: perf1 perf1-priv perf1
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 90 seconds.
Thanks,
Muthu

Similar Messages

CRS installation: Failure at final check of Oracle CRS stack.10

Hello,
I am trying to install Oracle RAC in 10GR2 to simulate a migration from 1024 to 11GR2. I am using VMWARE with two Linux CentOS 64b 6.2 and shared disks as raw devices. I got "Failure at final check of Oracle CRS stack.10" when running root.sh, on both nodes. The ocrcheck is fine, but I have two different IDs... which is not good and I do not understand why:
- I have shared raw devices
- the devices are the same, I checked this twice
Can anyoane help?
I thank you all in advance.

Hello,
The exact error message is the one in my subject description: Failure at final check of Oracle CRS stack.10
This occurs when runing root.sh after the installation is successfull and there is no way to continue, the assistants are failing, which is logic, as the root.sh attempt to configure and run the CRS agents are not done successfully. The OCR ar ok with the same ID on both nodes, the minor in major values for the raw devices are and the firewall is disabled on both nodes. I checked the rights, they are also ok. The exact and complete return of the root.sh script is the following:
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: cygnus cygnus-priv cygnus
node 2: taurus taurus-priv taurus
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /apps/oracle/oradat/vot10
Now formatting voting device: /apps/oracle/oradat/vot20
Now formatting voting device: /apps/oracle/oradat/vot30
Format of 3 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10
Any help will be really apreciated and I thank you in advancen guys...

CRS installation giving Warning message

Dear DBA's,
CRS installation failed with the following error. The log file does not have any details for the cause of the failure ...
Error While copying directory /home/oracle/crs/102 with exculde file list 'null' to nodes
'rac2':PRKC-1002; all the submitted commands did not execute successfully
rac2:
/bin/tar:./bin/vipca: time stamp <date> is 230 s in the future
/bin/tar:./bin/oifcfg: time stamp <date> is 194 s in the future
....(more errors on this node)
Refer to '/home/oracle/oraInventory/logs/installActions2009-08-27_09-29-33AM.log' for details. You may fix the err
ors on the required remote nodes. Refer to the install guide for error recovery. Click 'Yes' if you want to procee
d. Click 'No' to exit the install. Do you want to continue?
What could be the reson for this failure?
Best Regards,
SG

Dear Sawwan,
I followed the above note the result as follows.
[oracle@rac1 bin]$ ./cluvfy stage -post crsinst -n all
Performing post-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "rac1".
Checking user equivalence...
User equivalence check passed for user "oracle".
Checking Cluster manager integrity...
Checking CSS daemon...
Daemon status check failed for "CSS daemon".
Check failed on nodes:
rac2,rac1
Cluster manager integrity check failed.
Checking cluster integrity...
Cluster integrity check passed
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
All nodes free of non-clustered, local-only configurations.
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
Data integrity check for OCR passed.
OCR integrity check passed.
Checking CRS integrity...
Checking daemon liveness...
Liveness check failed for "CRS daemon".
Check failed on nodes:
rac2,rac1
Checking daemon liveness...
Liveness check failed for "CSS daemon".
Check failed on nodes:
rac2,rac1
Checking daemon liveness...
Liveness check failed for "EVM daemon".
Check failed on nodes:
rac2,rac1
CRS integrity check failed.
Post-check for cluster services setup was unsuccessful on all the nodes.
======================================================================
[oracle@rac1 bin]$ ./crs_stat -t
CRS-0184: Cannot communicate with the CRS daemon.
[oracle@rac1 bin]$
==========================================================================
[oracle@rac1 bin]$ ./crsctl
Usage: crsctl check crs - checks the viability of the CRS stack
crsctl check cssd - checks the viability of CSS
crsctl check crsd - checks the viability of CRS
crsctl check evmd - checks the viability of EVM
crsctl set css <parameter> <value> - sets a parameter override
crsctl get css <parameter> - gets the value of a CSS parameter
crsctl unset css <parameter> - sets CSS parameter to its default
crsctl query css votedisk - lists the voting disks used by CSS
crsctl add css votedisk <path> - adds a new voting disk
crsctl delete css votedisk <path> - removes a voting disk
crsctl enable crs - enables startup for all CRS daemons
crsctl disable crs - disables startup for all CRS daemons
crsctl start crs - starts all CRS daemons.
crsctl stop crs - stops all CRS daemons. Stops CRS resources in case of cluster.
crsctl start resources - starts CRS resources.
crsctl stop resources - stops CRS resources.
crsctl debug statedump evm - dumps state info for evm objects
crsctl debug statedump crs - dumps state info for crs objects
crsctl debug statedump css - dumps state info for css objects
crsctl debug log css [module:level]{,module:level} ...
- Turns on debugging for CSS
crsctl debug trace css - dumps CSS in-memory tracing cache
crsctl debug log crs [module:level]{,module:level} ...
- Turns on debugging for CRS
crsctl debug trace crs - dumps CRS in-memory tracing cache
crsctl debug log evm [module:level]{,module:level} ...
- Turns on debugging for EVM
crsctl debug trace evm - dumps EVM in-memory tracing cache
crsctl debug log res <resname:level> turns on debugging for resources
crsctl query crs softwareversion [<nodename>] - lists the version of CRS software installed
crsctl query crs activeversion - lists the CRS software operating version
crsctl lsmodules css - lists the CSS modules that can be used for debugging
crsctl lsmodules crs - lists the CRS modules that can be used for debugging
crsctl lsmodules evm - lists the EVM modules that can be used for debugging
If necesary any of these commands can be run with additional tracing by
adding a "trace" argument at the very front.
Example: crsctl trace check css
[oracle@rac1 bin]$
Best Regards,
SG

Crs installation problem in oracle 10g rac with NAS storage

Hi,
for my practice i am trying to install oracle 10gR2 on RHEL5-64bit OS in my laptop.
during my crs installation i have struckup with the below error while i am executing root.sh in node1.
Error:
+++++
Setting the permissions on OCR backup directory
Setting up NS directories
PROT-1: Failed to initialize ocrconfig
Failed to upgrade Oracle Cluster Registry configuration
ocrconfig.log ;
++++++++++++
NFS file system /u01 mounted with incorrect options
[ OCROSD][4265610768]WARNING:Expected NFS mount options: wsize>=32768,rsize>=32768,hard,(noac | actimeo=0 | acregmin=0,acregmax=0,acdirmin=0,acdirmax=0
[ OCROSD][4265610768]utopen:6m'': OCR location [share/storage/ocr] configured is not a valid storage type. Rturn code [37].
As per metalink i have find that this problem is fixed with Patch:4679769
# Patch Installation Instructions:
# To apply the patch, unzip the PSE container file:
# p4679769_10201_LINUX.zip
# Set your current directory to the directory where the patch
# is located:
# % cd 4679769
# Copy the clsfmt.bin binary to the $ORACLE_HOME/bin directory where
# clsfmt is being run:
# % cp $ORACLE_HOME/bin/clsfmt.bin $ORACLE_HOME/bin/clsfmt.bin.bak
# % cp clsfmt.bin $ORACLE_HOME/bin/clsfmt.bin
# Ensure permissions on the clsfmt.bin binary are correct:
# % chmod 755 $ORACLE_HOME/bin/clsfmt.bin
3. Run the root.sh script and proceed with the installation.
**My question is still i am not install Database ..only i ma trying to install crs but in this readme .txt we need to replace the clsfmt.bin file in ORACLE_HOME/bin.**
**but i have not bin directory under in ORACLE_HOME.please clear my doupt to apply this patch...**
Regards,
Mugunth

Also you clusterware installation installs to an ORACLE_HOME.
Oracle does only make a differentiation, if it has to be clear, that you got a clusterware home and a database home.
Normally if a patch is referring to $ORACLE_HOME (and the patch can be used for clusterware & database), it just means the installation directory of the oracle software installed.
Sebastian

Failed to Install The New Preview Build. Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.

Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...

Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support

Installation Failure: Windows failed to install the following update with error 0x800F0922

Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!

Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil

Windows 8 installation failure with German language pack

Hi,
I have a Lenovo ThinkPad Edge E330 with Windows 8. We just received it over Xmas - nice product. Just one Thing so far: I can't get the German language pack installed. Language, Keyboard layout and other regional Settings are set to German. After downloading the German language pack through Language->German->options->Download and Install Language pack (German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP])I always run into the following error during the Installation (download seems to be fine, error happens after about 2/3 of the Installation - if you believe the Progress bar). From the Event Viewer:
Installation Failure: Windows failed to install the following update with error 0x80070002: German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP].
I already tried quite some stuff without success: no pending Upgrades, several reboots, switching off Firewall/anti-Virus, selective reboot just with Winodws Services and Startup stuff, ... No success.
Does anybody have seen a similar Problem? Anybody with a solution to get the German language pack finally installed?
Thanks in advance for your Support,
Ingo
Event-Details:
System
Provider
[ Name]
Microsoft-Windows-WindowsUpdateClient
[ Guid]
{945A8954-C147-4ACD-923F-40C45405A658}
EventID
20
Version
1
Level
2
Task
1
Opcode
13
Keywords
0x8000000000000028
TimeCreated
[ SystemTime]
2012-12-28T10:06:26.588367000Z
EventRecordID
2032
Correlation
Execution
[ ProcessID]
388
[ ThreadID]
2640
Channel
System
Computer
Lenovo-PC
Security
[ UserID]
S-1-5-18
EventData
errorCode
0x80070002
updateTitle
German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP]
updateGuid
{B9991A98-7903-4A91-B17A-818B1C1D9633}
updateRevisionNumber
200
serviceGuid
{9482F4B4-E343-43B6-B170-9A65BC822C77}

Hi SOL
For more information , please find the below download link.
http://software.cisco.com/download/release.html?mdfid=282806052&release=8.6.6&relind=AVAILABLE&flowid=221&softwareid=282774363&rellifecycle=&reltype=latest
Thank you
please rate all useful information

Adobe Camera Raw 6.7 Installation Failure

From Adobe Bridge CS5, I enter Help, then Updates.
Adobe Application Manager informs me that I can update Adobe Camera Raw to 6.7.
I click to install, the software is downloaded tha I get an Installation Failure message.
When I click on 'Customer Support' on the screen, I am directed to 'http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html'.
At no point during the installation was I asked for the serial number.
Regards
Mike

Please confirm your ACR version from Help->About Plugin->Camera Raw and provide us with the following logs.
You can find them at:
ACR Installer logs
For Mac:
Library\Logs\Adobe\Installer
For Win:
Program Files(x86)\Common Files\Adobe\Installers
AAM logs
For Mac:
/Volumes/%Volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0
For Win:
C:\Users\<username>\AppData\Local\Adobe\AAMUpdater
You can zip all the files together and send us through mail. This would help us in finding the root cause.
Appreciate your help. Apologize for the inconvenience.
Regards,
Ashutosh
[email protected]

Acrobat X pro installation failure

I always have had problem with Acrobat installation.
Last time it make me completely reinstalled Windows before I can successfully installed Acrobat. However, recently my Win 8.1 pro has had problem so I decided to reinstall Windows from scratch. Again, I encountered Acrobat installation failure.
Here are the error messages:
ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
----------- Payload: {CA7C485C-7A89-11E1-B2C8-CD54B377BC52} Adobe Fireworks CS6 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at L:\Adobe CS6\payloads\AdobeFireworks12-mul\OEM(Seq 2141)
----------- Payload: {05E1E278-7A8D-11E1-A0B9-FC0245DB7244} Adobe Fireworks CS6_AdobeFireworks12en_USLanguagePack 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at L:\Adobe CS6\payloads\AdobeFireworks12en_USLanguagePack\OEM(Seq 76)
----------- Payload: {4FAB339E-2132-434F-9376-9CD735E4C69C} Adobe Flash CS6 12.0.0.0 -----------
ERROR: DR012: Setting Registry Value Failed. Error 5 Access is denied.(Seq 151)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
Infact, the Creative Suite is the very few first applications I installed after Windows set up.
Any clues on why this happens. I'm tired of reinstalling Windows again and again. But Acrobat is important for me.

Errors "Exit Code: 6," "Exit Code: 7"
Mylenium

10g CRS installation error on W2k / W2k3

Hello,
the installation of Oracle CRS is apparently successful, but the configuration assistants fail.
Details in the log-file:
Output generated from configuration assistant "Oracle Cluster Ready Services Configuration Assistant":
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 10.0.0.1 rac1
node 2: rac2 10.0.0.2 rac2
Creating OCR keys for user 'administrator', privgrp ''..
Operation successful.
Now formatting voting device: F:\cdata\rac\votedsk
Successful in setting block0 for voting disk.
Format complete.
Step 1: checking status of CRS cluster
Step 2: configuring OCR repository
Step 3: configuring safe mode for CRS stack
Step 4: Starting up CRS stack on all nodes
rac1 service OracleCSService in improper PENDING state, err(997)
rac2 service OracleCSService in improper PENDING state, err(997)
Configuration assistant "Oracle Cluster Ready Services Configuration Assistant" failed
After CRS-installation the following situation results.:
Node 1 (installation PC)
File copy to c:\oracle and c:\Program Files\Oracle successfully.
Drive letter mapping (E:;F:) and formatting successfully.
File copy to F:\cdata\rac\votedsk successfully.
Four Oracle Services created. OracleClusterVolumeService started.
OracleCSService is hanging. Therefore OracleEMVService and OracleCRService couldn't start.
Error messages in the local Oracle log-file see above.
Node 2
File copy to c:\oracle and c:\Program Files\Oracle successfully.
NO drive letter mapping.
Four Oracle Services created. OracleClusterVolumeService started.
OracleCSService is hanging. Therefore OracleEMVService and OracleCRService couldn't start.
No errors in the local Oracle log-file.
This error occurs with repeated attempts (both under Windows 2000 and under Windows server 2003).
Environment:
Two Dell-PCs with in each case two 100 MBit/s Ethernet-LAN cards which one is connected public network, other is connected internal network (crossover cable).
OS is installed clean, not contain previous oracle.
Any help would be greatly appreciated.
Volker

try this:
" If OracleCMService9i or the OracleService<SID> fails to start check that the interconnect is using a hub or switch of some type. In many cases, use of a crossover cable can lead to hangs because when there is loss of electrical connectivity to a NIC, it is sometimes disabled on systems running Windows NT/2000. This can also lead to an increase in time that it takes to initialize the card on a reboot. This depends on the HW platform, but in general, Oracle recommends always using a switch or hub for the interconnect, so that some type of connectivity is maintained with the Private NIC. Note: You may also be able to avoid this by disabling Media Sense in Registry, but a switch is preferred. See MS Article#Q239924 for details on disabling media sense.: http://support.microsoft.com/default.aspx?scid=kb;en-us;Q239924 This applies to all Oracle versions."

Itune installation failure

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITunes is corrupted or is not installed correctly. Please reinstall Itunes"

I went a step further than before and got itunes running again.
The Updater had also installed Quicktime.
I launched quicktime, it appeared to be configuring and then launched. Then when I run Itunes now it is working...
Hope this is your problem also.

CRS installation

My Cluster Ready Services 10.1 (CRS) installation ran into some problem.
Following are the pre-installation and installation steps which i followed.
1. The system setup involved 2 identical nodes with Windows 2000 Advanced Server SP4 OS.
2. 2 static Public IP's for the 2 nodes
3. 2 private IP's which were created using network connections option and can be pinged.(1st Node Private IP 10.10.10.2 2nd Node Private IP 10.10.10.3)
4. Entry of the private IP's can also be found in the host file.
5. Both the nodes are connected to a external SCSI hard disk.The Skuzzy hard disk is not formated.Before installing CRS logical partitions where made on the Skuzzy hard disk for OCR,Voting disk and ASM.
6. While installing CRS on one of the nodes in the Network Usage Page one interface was selected as Private and the other as public.
7. The Do not format any logical drives was selected.
8. Finally the Logical partitions made on the SCSI hard disk were assigned to the OCR and voting disk.
After that the installation went without any problems till it reached 98%.The installation was stuck on 98% for almost 30 minutes.Sensing problem i opened the installation log file and scrolled down to the last few entries which said that the files could not be written on the node as it is accessed by some other program.So i had to abort the installation.
Could anyone tell me if i have skipped some steps or need to add any step to make my CRS installation a success.
Thanking you in Anticipation,
Regards,
Salil

Following is the description of the error found in the installation log.
):D:\oracle\product\10.1.0\crs/nls/data/lx2005c.nlb:pc-p41295:true
***Unable to copy file to nodes (The process cannot access the file because it is being used by another process.
):D:\oracle\product\10.1.0\crs/nls/data/lx2005d.nlb:pc-p41295:true
***Unable to copy file to nodes (The process cannot access the file because it is being used by another process.
):D:\oracle\product\10.1.0\crs/nls/data/lx2005d.nlb:pc-p41295:true
***Unable to copy file to nodes (The process cannot access the file because it is being used by another process.
):D:\oracle\product\10.1.0\crs/nls/data/lx2005e.nlb:pc-p41295:true
***Unable to copy file to nodes (The process cannot access the file because it is being used by another process.
):D:\oracle\product\10.1.0\crs/nls/data/lx2005e.nlb:pc-p41295:true
Regards,
Salil

Adobe Player for Embedding installation failure

Multiple tries but only failure - have tried both the automatic update and also the standalone installer. Zero sucess. Since I have CS5 Master Collection hate to wate the better part of the day doing a clean re-install. Here is my most recent update log file.
Any suggestions on what I should try are welcome!
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Visit http://www.adobe.com/go/loganalyzer/ for more information
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
START - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
RIBS version: 3.0.122.0
Win OS version: 6.1.0.0 64 bit Type: 1
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
deploymentFile option not given
Create Required Folders
Assuming install mode
Looking up install source path
Sync Media DB ...
::START TIMER:: [Sync Media DB]
Pre check media db sync
End of Pre check media db sync. Exit code: 0
:: END TIMER :: [Sync Media DB] took 185.497 miliseconds (0.185497 seconds) DTR = 21.5637 KBPS (0.0210583 MBPS)
Ready to initialize session to start with ...
::START TIMER:: [CreatePayloadSession]
-------------------- BEGIN - Updating Media Sources - BEGIN --------------------
Updated source path: C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup
Updating media info for: {F9997A85-B21A-48E4-9C8A-7E1352AB1C62}
Ignoring original data since install source is local
Type: 0, Volume Order: 1, Media Name:
Path: C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
-------------------- END - Updating Media Sources - END --------------------
Supported RIBS version range: [0.0.66.0,3.0.122.0]
----------------- CreatePayloadSession: machine is x64 ---------------
[    4956] Sun Nov 14 07:48:25 2010 INFO
______ Verify Dependency Subscribers ______
Overwrite property "extensionsOnly" to: 1
Overwrite property "mode" to: silent
Overwrite property "patchesOnly" to: 1
Overwrite property "workflow" to: updater
Found payload actions:
Deciding what installer mode to use...
BEGIN Setting requested payload actions
Value returned on lookup of payload: {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul is: false
Action string for {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul is install
END Setting requested payload actions
Collected advanced path check information for INSTALLDIR
INSTALLDIR is a well-formed path
INSTALLDIR is not the root path
INSTALLDIR is on a local volume
INSTALLDIR is on a writable volume
INSTALLDIR is not on a case sensitive volume
INSTALLDIR passed path basic path validation: C:\Program Files\Common Files\Adobe\APE\3.1
[    4956] Sun Nov 14 07:48:26 2010 INFO
Payloads passed preflight validation.
Call PreSession Custom Hook
Calling the custom action code for pre-install for payload {F9997A85-B21A-48E4-9C8A-7E1352AB1C62}
::START TIMER:: [Payload Operation :{F9997A85-B21A-48E4-9C8A-7E1352AB1C62}]
[    5276] Sun Nov 14 07:48:26 2010 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Installer Operation: PayloadInstaller
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Request to install payload
Extracting assets...
Extracting assets complete. Number assets: 1
CustomizedPatch property not found in database
Beginning installation for payload at C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
[    5276] Sun Nov 14 07:48:26 2010 ERROR
6 Command ARKPatchCommand failed.
[    5276] Sun Nov 14 07:48:26 2010 INFO
Completing installation for payload at C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
[    5276] Sun Nov 14 07:48:26 2010 ERROR
6 Error rolling back command ARKPatchCommand
[    4956] Sun Nov 14 07:48:27 2010 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 2 =*=*=*=*=*=*=*=*=*=*=*=*=*
:: END TIMER :: [Payload Operation :{F9997A85-B21A-48E4-9C8A-7E1352AB1C62}] took 1024.22 miliseconds (1.02422 seconds) DTR = 3.90539 KBPS (0.00381386 MBPS)
User specified overrideFile:
Calling the ROLLBACK custom action code for pre-install for payload {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul
No operation. We're done:
Updating driver data - Action: Remove driver entry
Updating driver data successful. Driver entry was removed. ARP estimated size 0KB
[    4956] Sun Nov 14 07:48:29 2010 INFO
Total components installed: 0
Total components repaired: 0
Total components removed: 0
[    4956] Sun Nov 14 07:48:29 2010 ERROR
The following payload errors were found during install:
- Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul: Install failed
[    4956] Sun Nov 14 07:48:29 2010 INFO
Call PostSession Custom Hook
:: END TIMER :: [Total Timer] took 7290.45 miliseconds (7.29045 seconds) DTR = 144.298 KBPS (0.140916 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 0 warning(s)
ERROR: 6 Command ARKPatchCommand failed.
ERROR: 6 Error rolling back command ARKPatchCommand
ERROR: The following payload errors were found during install:
ERROR: - Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul: Install failed
Search the same string above to find when the error occured.
Exit Code: 7 - Unable to complete Silent workflow
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

As an update to my previous post about the installation failure. I chatted with Adobe Customer Service but they were unable to help and told me to call tech support - last time I did that I was unable to resolve the problem after spending about 2 hours on the phone and they are only open during the week.
I solved the problem by:
1) Deactiviating CS5 Master Collection on my computer
2) Uninstalling the software from the control panel (I did not remove the serial number as I was planning on re-installing.
3) Downloading and running the Adobe CS5 Cleanup tool.
4) Reinstalling CS5 MC.
5) Downloading and installing all of the updates to bring the install up to date.
I am glad it is working as it should but really had better things to do with the 4-5 hours this took to do. Would be nice to have a tool to fix these types of problem without having to go thru the above especially considering the price the software costs...

Installation Error DW050: Adobe Illustrator CS5.1: failed due to language pack installation failure

I recently got a macbook Air and needed to reinstall my adobe creative suite to said new computer. I purchased creative suite online so I downloaded it from there and followed the installation instructions to a T.
I originally purchased Adobe Creative Suite in 2011 so it is version CS5.1
Everything installed successfully except Adobe Illustrator, which at the end left me this error message
ERROR: DW050: - Adobe Illustrator CS5.1_AdobeIllustrator15_1en_USLanguagePack: Install failed
ERROR: DW050: - Adobe Illustrator CS5.1: Failed due to Language Pack installation failure
how can I get illustrator on my computer?!
Hoping to sell my previous computer soon and I'm almost done transferring programs and photographs.
Thanks so much!

Which language is the application?
Which language is your system?
Which system?

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITun

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITunes is corrupted or is not installed correctly. Please reinstall Itunes"
iMac, iOS 6

HI,
If your old version of iTunes is still working - then I sugest you stick with that.
iTunes 11 is a lousy update - It will not retain your playlists, you can't find and delete duplicates... and a whole arry of oyher issues. (have a look around this forum to see how many issues IT11 gives people)
Just a friendly advise and warning :-)

CRS Installation failure

Similar Messages

Maybe you are looking for