CRS installation giving Warning message

Dear DBA's,
CRS installation failed with the following error. The log file does not have any details for the cause of the failure ...
Error While copying directory /home/oracle/crs/102 with exculde file list 'null' to nodes
'rac2':PRKC-1002; all the submitted commands did not execute successfully
rac2:
/bin/tar:./bin/vipca: time stamp <date> is 230 s in the future
/bin/tar:./bin/oifcfg: time stamp <date> is 194 s in the future
....(more errors on this node)
Refer to '/home/oracle/oraInventory/logs/installActions2009-08-27_09-29-33AM.log' for details. You may fix the err
ors on the required remote nodes. Refer to the install guide for error recovery. Click 'Yes' if you want to procee
d. Click 'No' to exit the install. Do you want to continue?
What could be the reson for this failure?
Best Regards,
SG

Dear Sawwan,
I followed the above note the result as follows.
[oracle@rac1 bin]$ ./cluvfy stage -post crsinst -n all
Performing post-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "rac1".
Checking user equivalence...
User equivalence check passed for user "oracle".
Checking Cluster manager integrity...
Checking CSS daemon...
Daemon status check failed for "CSS daemon".
Check failed on nodes:
rac2,rac1
Cluster manager integrity check failed.
Checking cluster integrity...
Cluster integrity check passed
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
All nodes free of non-clustered, local-only configurations.
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
Data integrity check for OCR passed.
OCR integrity check passed.
Checking CRS integrity...
Checking daemon liveness...
Liveness check failed for "CRS daemon".
Check failed on nodes:
rac2,rac1
Checking daemon liveness...
Liveness check failed for "CSS daemon".
Check failed on nodes:
rac2,rac1
Checking daemon liveness...
Liveness check failed for "EVM daemon".
Check failed on nodes:
rac2,rac1
CRS integrity check failed.
Post-check for cluster services setup was unsuccessful on all the nodes.
======================================================================
[oracle@rac1 bin]$ ./crs_stat -t
CRS-0184: Cannot communicate with the CRS daemon.
[oracle@rac1 bin]$
==========================================================================
[oracle@rac1 bin]$ ./crsctl
Usage: crsctl check crs - checks the viability of the CRS stack
crsctl check cssd - checks the viability of CSS
crsctl check crsd - checks the viability of CRS
crsctl check evmd - checks the viability of EVM
crsctl set css <parameter> <value> - sets a parameter override
crsctl get css <parameter> - gets the value of a CSS parameter
crsctl unset css <parameter> - sets CSS parameter to its default
crsctl query css votedisk - lists the voting disks used by CSS
crsctl add css votedisk <path> - adds a new voting disk
crsctl delete css votedisk <path> - removes a voting disk
crsctl enable crs - enables startup for all CRS daemons
crsctl disable crs - disables startup for all CRS daemons
crsctl start crs - starts all CRS daemons.
crsctl stop crs - stops all CRS daemons. Stops CRS resources in case of cluster.
crsctl start resources - starts CRS resources.
crsctl stop resources - stops CRS resources.
crsctl debug statedump evm - dumps state info for evm objects
crsctl debug statedump crs - dumps state info for crs objects
crsctl debug statedump css - dumps state info for css objects
crsctl debug log css [module:level]{,module:level} ...
- Turns on debugging for CSS
crsctl debug trace css - dumps CSS in-memory tracing cache
crsctl debug log crs [module:level]{,module:level} ...
- Turns on debugging for CRS
crsctl debug trace crs - dumps CRS in-memory tracing cache
crsctl debug log evm [module:level]{,module:level} ...
- Turns on debugging for EVM
crsctl debug trace evm - dumps EVM in-memory tracing cache
crsctl debug log res <resname:level> turns on debugging for resources
crsctl query crs softwareversion [<nodename>] - lists the version of CRS software installed
crsctl query crs activeversion - lists the CRS software operating version
crsctl lsmodules css - lists the CSS modules that can be used for debugging
crsctl lsmodules crs - lists the CRS modules that can be used for debugging
crsctl lsmodules evm - lists the EVM modules that can be used for debugging
If necesary any of these commands can be run with additional tracing by
adding a "trace" argument at the very front.
Example: crsctl trace check css
[oracle@rac1 bin]$
Best Regards,
SG

Similar Messages

CS5 XP installer error/warning message

Hi,
When I start the PS CS5 Windows installer DVD (full version), I get a warning message: "Adobe Installer -- Installer has detected that a machine restart may be pending. It is recommended that you quit installer, restart and try again." There are two buttons: Ignore and Continue, and Quit. The first time I saw this, I quit and restarted and then started the install DVD again. I got the same message, but this time I clicked Ignore and Continue. The installation proceeded without problems.
Anyone know why I would get this error message? It happens every time in insert the install DVD.
Thank you.
John

I found this:
http://kb2.adobe.com/cps/828/cpsid_82829.html
I'm not sure why this happened, but since it caused no problems, I will consider this "case closed."
Thanks...
John

Credit Limit warning message?

Hi All
The credit limit is enabled for the customers and the system is giving warning messages wherever the credit limit is deviated. The same warning message appears even though there is no credit limit is set for some customers? why is this/
Thanks
SV Reddy

Hi
This setting s made Globally for all BP's. if it is for One BP Credit Limit is 0.00 , that u have not mentioned ,then SAP wil think that it crossing limit so it will warns. if u want to come for ly particular Bp whose cr. limit defined then u can try with SP_Trans..
Giri

Regarning warning message

I have created a selection screen report.
after giving warning message, i have to put back control to main screen.
If i am raising a warning message, it is giving an error and control is going to blank screen.
how to put control on main screen?

start-of-selection.
*If the Selection Crieteria specified
IF S_BUDAT[] is not initial OR
S_BWART[] is not initial.
Do processing
else. "Give Warning message
MESSAGE 'Selection was not restricted.' TYPE 'W'.
EXIT.
endif. "Selection Criteria
Add the EXIT as shown.
Regards,
Ravi

Classify gl for doc spllitting warning message

I have two GL account configured in "classify GL for doc spliitiing" in new GL, one is cash account, category 04000, the other is normal B/S acclount, category: 01000, when I click proposal, the cash account giving warning message, but the normal B/S account status is green, why warning, how to make it green? thanks

Hello Siva,
Would you please elaborate your exact issue ?
I mean in which transaction you click proposal and what Warning Message exactly you getting?
Regards,
Manish

I upgraded to Mavericks. Everything went smoothly. But now Excel is giving all of its warnings in what I believe is Chinese. As an example I update a file, close it, and the warning message about saving is in Chinese. Anybody else encounter this?

I upgraded to Mavericks. Everything went smoothly. But now Excel is giving all of its warnings in what I believe is Chinese. As an example I update a file, close it, and the warning message about saving is in Chinese. Anybody else encounter this?

If you don't get an answer here, ask in the forums devoted to MS stuff:
http://answers.microsoft.com/en-us/mac/forum/macexcel

Im having a problem updating my itunes. Im able to download the setup but it keeps on giving this message: there is a problem with this windows installer package. a program required for this install this to complete could not be run. can anyone help?

Im having a problem updating my itunes. Im able to download the setup but it keeps on giving this message: there is a problem with this windows installer package. a program required for this install this to complete could not be run. can anyone help?

Im able to download the setup but it keeps on giving this message: there is a problem with this windows installer package. a program required for this install this to complete could not be run
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Fennec 4.0b6pre installs but immediately closes giving this message on X10 mini pro 2.1 "fennec does not support this device and you may experince problems."

'''Fennec 4.0b6pre (arm6 nightly build) installs but immediately closes giving this message on X10 mini pro 2.1 "Fennec does not support this device and you may experience problems." and two option "continue" & "quit" but closes before clicking any button immediately. '''

https://wiki.mozilla.org/Mobile/Platforms/Android#System_Requirements
Your device (I assume it's `'''Sony Ericsson Xperia X10 Mini'''`) is not compatible with Fennec ARMv7-optimized releases, but might be able to run the [https://wiki.mozilla.org/Mobile/Platforms/Android#ARMv6_.28experimental.29 experimental ARMv6 nightly builds].

I couldnt update my itune as it was coming up with a warning message so i uninstalled it and now it wont let me re installl it? when i hit download off apple website it goes to thank you for downloading itunes but it didnt download.

i couldnt update my itune as it was coming up with a warning message so i uninstalled it and now it wont let me re install it? when i hit download off apple website it goes to thank you for downloading itunes but it didnt download.

Hi,
Please uninstall your creative cloud desktop app and re-download it from the below link:-
Creative Cloud Help | Creative Cloud for desktop
and then follow the same steps that you have been following.
Hope that works for you.
Regards
Sarthak

Webmail giving some starnge Warning messages! Please Help

Hi,
After upgrading to Snow Leopard Server, I'm getting strange warning messages in my web mail,
Find the warning messages below, Looking forward to your support.
Warning: strtotime() [function.strtotime]: It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Asia/Calcutta' for 'IST/5.0/no DST' instead in /usr/share/squirrelmail/functions/date.php on line 420
Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Asia/Calcutta' for 'IST/5.0/no DST' instead in /usr/share/squirrelmail/functions/date.php on line 95
Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Asia/Calcutta' for 'IST/5.0/no DST' instead in /usr/share/squirrelmail/functions/date.php on line 347
Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Asia/Calcutta' for 'IST/5.0/no DST' instead in /usr/share/squirrelmail/functions/date.php on line 289
Thanks,
Gulab Pasha

first backup the file you're going to be editing:
sudo cp /etc/php.ini /etc/php.ini.bak
then edit the file:
sudo nano /etc/php.ini
then hit CONTROL-W (to search for something)
then type "date.time"
then hit RETURN
that should bring you to an area under modules that looks like the following:
; Module Settings ;
[Date]
; Defines the default timezone used by the date functions
; http://php.net/date.timezone
;date.timezone =
You can lookup your timezone at http://php.net/date.timezone (for instance"America/New_York")
then take out the semicolon and type your timezone after the equal sign so it looks like this:
; Module Settings ;
[Date]
; Defines the default timezone used by the date functions
; http://php.net/date.timezone
date.timezone = America/New_York
then hit CONTROL-X (to quit nano)
then hit Y (to save your changes)
then hit RETURN (to use the same file name)

CRS Installation failure

CRS installation failed with the following error. The log file does not have any details for the cause of the failure ...
Error While copying directory /u01/app/oracle/product/crs_1 with exculde file list 'null' to nodes
'prd2':[PRKC-1002; all the submitted commands did not execute successfully]
prd2:
/bin/tar:/lib/libocrutl10.a: file shrank by 254 bytes; padding with zeros
/bin/tar:Error exit delayed from previous errors
refer to '/u01/app/oracle/oraInventory/logs/installActionsXXXXXXXX.log' for details. you may fix the errors on the required remote nodes.Refer to install guide for error recovery.
What could be the reson for this failure?

Hi,
I have configured NFS and started installing CRS. At the end of installation, I ran the script /d01/crs/oracle/product/10.2.0/crs/root.sh from the Node1. It was successful.
But while running the /d01/crs/oracle/product/10.2.0/crs/root.sh from the Node 2 from root user, it is hanging after displaying the message "Startup will be queued to init within 90 seconds."
I am struck at this point. Please help me.
/d01/crs/oracle/product/10.2.0/crs/root.sh
WARNING: directory '/d01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/d01/crs/oracle/product' is not owned by root
WARNING: directory '/d01/crs/oracle' is not owned by root
WARNING: directory '/d01/crs' is not owned by root
WARNING: directory '/d01' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/d01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/d01/crs/oracle/product' is not owned by root
WARNING: directory '/d01/crs/oracle' is not owned by root
WARNING: directory '/d01/crs' is not owned by root
WARNING: directory '/d01' is not owned by root
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
assigning default hostname jces401 for node 1.
assigning default hostname perf1 for node 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: jces401 jces401-priv jces401
node 2: perf1 perf1-priv perf1
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 90 seconds.
Thanks,
Muthu

WARNING message when i start up itunes

although my Itunes is working properly it keeps giving me a WARNING message saying "it was not properly installed. If you wish to import of burn cds you need to reinstall." Is there a way to fix this problem or even get rid of the message i've tried updating cd drivers, the latest itunes, and re installing itunes. so on.... can anyone give me some help?

By chance I read this article, really useful by danny michel:
I quote: "Whew! Now my Apple iTunes version 7.4.1.2 is working again on my Microsoft Windows Vista Ultimate 64-bit (x64) operating system! Ironically, unlike I reported earlier today -- the import, ripping, and CD-burning inside Apple iTunes was still working. However, I kept receiving the pesky Apple iTunes Setup Assistance window with the following message:
"iTunes was not properly installed. If you wish to import or burn CDs, you need to reinstall iTunes."
First, let me say to the Apple iTunes folks that this message was completely mis-leading. The product still functioned correctly, just the error messaging was inappropriate. Not really the best user experience. (Yes, I know 64-bit operating systems are 'technically' not supported by Apple. How long can they continue this though? It is bordering on unreasonable.)
Here is how you can fix the issue: If it works for you, please let me know with a comment below!
1. The problem is with the Gear Software driver for 64-bit operating systems which is integrated into iTunes. What you need to do is visit the Gear Software website and download the right driver for your operating system and processor type. Here is the website: Driver Updates - GEAR Software, Multimedia Made Easy, GEARSEC
2. The right version for me was the middle one: Driver installer for AMD64 and Intel EM64T processors: Windows XP Professional x64, Windows Server 2003 x64 Edition, Windows Vista x64 Edition. I downloaded the file and saved to my desktop.
3. I ran the installation and completed the install for the Gear Software 64-bit drivers. It is just a series of 'next' and then it completes.
4. Fire up iTunes version 7.4.1.2 and it works as it is supposed to again!"
(http://www.ny-dev.com/forums/f215/fixed-itunes-not-properly-installed-1639/)
And also by Muldini on a previous topic:
I don't understand why Apple support doesn't react on this, as the solution is ridiculously easy.
You need a 64bit version of the driver, install the one you find here:
http://www.gearsoftware.com/support/drivers.cfm
Use "Driver installer for AMD64 and Intel EM64T processors".
Works like a charm.
And also by ccfoodog:
Thanks, this indeed worked for me.
I'm going to leave this set to 'No, my question has not been answered yet.' since as you point out, we shouldn't need a 3rd party driver to make Apple's software work.
Thanks!
And also by poppercorn:
WOW!!! Thanks a billion, Muldini! I have Vista 64bit and ever since I installed iTunes on it, I never got the burner to work on it and that stupid error message would pop up everytime I started the program. But I just installed the driver now and for the first time ever on this computer the program started without a hitch and it was able to detect my burner! Now I can go to sleep in peace tonight.
Apple should address this ASAP. Like you said, I also don't understand why they haven't settled this seemingly simple issue yet. With all of the thousands of Vista 64bit users out there, I'm sure we're not the only ones with this problem.
Go ahead people - if you're having the problem that you've read here and you're using Vista 64 bit, go and download those gearsoft drivers! I'm glad I did.
I think it is enough......

How to remove the 'New Entry' button in the warning message for a dialog bo

Hi Experts,
I am calling a Modal Dialog box screen having a pushbutton.
On the click of the pushbutton, I am performing some checks, and giving a warning message.
The warning message comes as a popup in this case and has three buttons on it.
One of these buttons is titled 'New entry'.
I dont want that button to come on the warning popup.
Please let me know if there is a way out for this.
Thanks in advance.
Useful answers will surely be rewarded.
Regards,
Himanshu

Hi Jyothi,
Thanks a lot for ur prompt reply.
But, in my dialog screen, on click of the button I am simply using the statement :
MESSAGE W000(0K) with 'text'.
The resulting warning message comes as a popup with the 'New Entry' button on it.
From the warning popup, how can I remove the button.
Please let me know.
Thanks.
Regards,
Himanshu

Warning message in field exit

Hi All,
I'd the requirement of giving a warning message for transaction VA01 if user enters some specific order type.
So I'd created a field exit for AUART for this screen. But i am able to give error message only and found out that warning & info messages can't be given in a field exit.
Please help me out. Is there any way I can give a warning message in field exit or suggest some other sol. for it.
Thanks,
Manu

Hi,
Thanks f or your answers, but the issue is that i need to give this message as User enters the details on VA01 screen & presses enters.SO i can't use user exit like move_field_to_Vbak & others.
Also, using a FM to give pop up message will ultimately make use of statement CALL SCREEN which is not allowed in field exit, i also tried FMs which displays messages normally means not in pop up screen, but again through it also i can only give error messages.
Please suggets if there is any other option.
Thanks,
Manu Parihar

Crs installation problem in oracle 10g rac with NAS storage

Hi,
for my practice i am trying to install oracle 10gR2 on RHEL5-64bit OS in my laptop.
during my crs installation i have struckup with the below error while i am executing root.sh in node1.
Error:
+++++
Setting the permissions on OCR backup directory
Setting up NS directories
PROT-1: Failed to initialize ocrconfig
Failed to upgrade Oracle Cluster Registry configuration
ocrconfig.log ;
++++++++++++
NFS file system /u01 mounted with incorrect options
[ OCROSD][4265610768]WARNING:Expected NFS mount options: wsize>=32768,rsize>=32768,hard,(noac | actimeo=0 | acregmin=0,acregmax=0,acdirmin=0,acdirmax=0
[ OCROSD][4265610768]utopen:6m'': OCR location [share/storage/ocr] configured is not a valid storage type. Rturn code [37].
As per metalink i have find that this problem is fixed with Patch:4679769
# Patch Installation Instructions:
# To apply the patch, unzip the PSE container file:
# p4679769_10201_LINUX.zip
# Set your current directory to the directory where the patch
# is located:
# % cd 4679769
# Copy the clsfmt.bin binary to the $ORACLE_HOME/bin directory where
# clsfmt is being run:
# % cp $ORACLE_HOME/bin/clsfmt.bin $ORACLE_HOME/bin/clsfmt.bin.bak
# % cp clsfmt.bin $ORACLE_HOME/bin/clsfmt.bin
# Ensure permissions on the clsfmt.bin binary are correct:
# % chmod 755 $ORACLE_HOME/bin/clsfmt.bin
3. Run the root.sh script and proceed with the installation.
**My question is still i am not install Database ..only i ma trying to install crs but in this readme .txt we need to replace the clsfmt.bin file in ORACLE_HOME/bin.**
**but i have not bin directory under in ORACLE_HOME.please clear my doupt to apply this patch...**
Regards,
Mugunth

Also you clusterware installation installs to an ORACLE_HOME.
Oracle does only make a differentiation, if it has to be clear, that you got a clusterware home and a database home.
Normally if a patch is referring to $ORACLE_HOME (and the patch can be used for clusterware & database), it just means the installation directory of the oracle software installed.
Sebastian

CRS installation giving Warning message

Similar Messages

Maybe you are looking for