CRS process does not startup automatically when the system is rebooted

Hi. all.
SOME TIMES(not always), CRS process ( exactly OracleCRService on
windows2003) does not startup automatically when the windows2003 is
rebooted.
O/S is windows2003 server.
DB is 10.2.0.2.0 RAC database that has 2 nodes.
I am testing a RAC database configuration, and thus rebooting one node
intentionally by turn.
I have tested about 20 times, and 17 times is OK. All required process is up
and all instance is up.
However, 3 times, OracleCRService services does not start, and concequently
database instance does not start automatically.
Here is the log of "crsd.log" file on the active node.
2007-05-31 17:43:13.281: [ CRSEVT][1720]32Processing RecoveryDone
2007-05-31 17:46:51.968: [ CRSRES][3876]32StopResource: setting CLI values
2007-05-31 17:46:52.437: [ OCRMAS][2368]th_rcfg_con: pudata retval [12]. Member [2] might have gone down
2007-05-31 17:46:52.437: [ OCRMAS][2368]proath_master: Node [2] came up/down 1/0 [1]. Problem retrieving pubdata. Should get down reconfig soon
2007-05-31 17:48:26.890: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.000: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.109: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.218: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.328: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.437: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.546: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.656: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.750: [ COMMCRS][2668]clsc_send_msg: (028BA8A0) NS err (12571, 12560), transport (533, 57, 0)
2007-05-31 17:48:27.750: [ CRSCOMM][2852]32CLSC connect failed tonmsp109ret = 9
2007-05-31 17:48:27.859: [ CRSEVT][2852]32invokepeer ret 200
2007-05-31 17:48:27.859: [ CRSRES][2852]32Remote start never sent to nmsp109: X_E2E_NotSent : Failed to connect to node: nmsp109
(File: caa_CmdRTI.cpp, line: 492
2007-05-31 17:48:27.859: [ CRSRES][2852][ALERT]32Remote start for `ora.nmsp109.gsd` failed on member `nmsp109`
Is there anyone who can help me?
Thanks in advance.
Best Regards.
Message was edited by:
user507290

oops- wrong forum!
Please try the RAC forum.

Similar Messages

ITunes does not start automatically when I plug in my iPHONE. When I start it manually it does not recognize my phone although the phone is visible in My Computer.

Itunes does not start automatically when I plug in my iPhone. When I start it manually, it never recognizes the phone although it does ask if I want to download pictures etc. Many albums have no art work that use to. iTunes completely unresponsive to the mouse.

Hi billm1013,
I'm sorry to hear you are having these issues with your iPhone. If your iPhone isn't being recognized in iTunes, and/or iTunes isn't responding to your mouse when the iPhone is connected, you may find the troubleshooting steps outlined in the following article helpful:
If you don't see your connected device in iTunes for Mac - Apple Support
Regards,
- Brenden

Itunes does not open automatically when I plug in iphone?

ITunes does not open automatically when I put my device via the USB cord into my computer. Even though I checked that box in I tunes

1. open up applications, and right click the itunes icon.
2. select 'show package contents'
3. open the contents folder
4. open the resources folder
5. scroll down until you find the ItunesHelper icon.
6. Now open up your system preferences.
7. select accounts
8. select login items
9. now drag the ItunesHelper icon into the login items screen
10. This will now put the ituneshelper app into the startup items.
Regards,
Colin R.

OSX 10.9.1 macbook pro 13 retina - wifi does not reconnect automatically when waking up from sleep mode since I have a Bluetooth apple magicmouse

Hello,
My config is OSX 10.9.1 new macbook pro 13 retina (2014).
The wifi does not reconnect automatically when waking up from sleep mode since I have a Bluetooth apple magicmouse.
It was not the case before I bought the BT mouse.
Is this problem between Wifi and bluetooth coming from the OS?
Is there a fix already available or scheduled?
Thanks

Hello alexandrefromfrance
Check the Symptom: The network connection drops unexpectedly section for steps on what to do when your MacBook Pro does not connect after waking from sleep. I have also quoted the section on troubleshooting the issue as well.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
After waking from sleep or starting up, your computer may not show that it is connected to a Wi-Fi network.
After start or wake, your computer may indicate that it is connected to a network, but does not connect to the Internet.
Solution
Use these steps if your computer does not automatically connect to your desired Wi-Fi network.
Check your TCP/IP settings in the Network pane of the System Preferences. Click the "Renew DHCP lease" button
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
Select Wi-Fi, then click the Advanced button in the lower-left hand corner of the screen.
Click the TCP/IP tab from the top of the screen.
Click the "Renew DHCP lease" button.
Select the Wi-Fi tab and view your Preferred Networks list.
Select each network and click the minus sign to remove those networks from your Preferred Networks list.
Click OK and close the Network preferences.
Remove your stored network passwords using the Keychain Access Utility.
Open Keychain Access from /Applications/Utilities. Your window will look like this:
Remove your AirPort network passwords from the login keychain: Select the "login" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
Remove your AirPort network passwords from the System keychain: Select the "System" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".  Note: The above steps will remove your Wi-Fi network passwords. If you do not know them, or if your network does not use passwords to restrict access, you should contact your network administrator.
Restart your computer.
Join your Wi-Fi network. You will need to enter your password for your network again if it requires one.
Regards,
-Norm G.

[svn:fx-4.0.0] 13615: fix airframework/build. xml so the en_US _rb does not become corrupt when the other. locales target is run.

Revision: 13615
Revision: 13615
Author:   [email protected]
Date:     2010-01-18 20:59:14 -0800 (Mon, 18 Jan 2010)
Log Message:
fix airframework/build.xml so the en_US _rb does not become corrupt when the other.locales target is run.
-removed the redundant en_US call in the other.locales target
-added a clean for locales that will only remove the locale being built before rebuild - not all of the locales
-add updated dita that does not contain spark references
QE notes:
Doc notes:
Bugs: no but Pete and I discussed briefly
Reviewer:
Tests run: doc and other.locales
Is noteworthy for integration:
Modified Paths:
    flex/sdk/branches/4.0.0/frameworks/projects/airframework/build.xml
    flex/sdk/branches/4.0.0/frameworks/projects/airframework/bundles/de_DE/docs/packages.dita
    flex/sdk/branches/4.0.0/frameworks/projects/airframework/bundles/fr_FR/docs/packages.dita
    flex/sdk/branches/4.0.0/frameworks/projects/airframework/bundles/ru_RU/docs/packages.dita
    flex/sdk/branches/4.0.0/frameworks/projects/airframework/bundles/zh_CN/docs/packages.dita

What kind of projects are they (Struts/JSF/Hibernate)? Does the working project differ in any way with other two apps?
What exactly is not working? Are they recognized by workshop as Struts/JSF/Hibernate app?
Please send the .log to [email protected]

Itunes does not start automaticly when connected although auto is thicked help?

Itunes does not start automaticly when connected although autostart is thicked can anyone help?

Hi,
See this Discussion:
https://discussions.apple.com/message/15693777#15693777
Cheers,

Database does not startup automatically

Oracle8i/Windows 2000 server
we have three database ,all are 9am to 6pm database
running on ARCHIVELOGMODE.
Few days back due to disk crash,
we have recovered our database using coldback up.
since we did not copy archive logs to different disk,
we lost some data.
disk was under warranty ,it was replaced.
then the database did not startup automatically.
okay the problem was,during booting(since 9am to 6pm database), we were daily logging in svrmgrl and startup the database manually.
now we have automated the above(startup) script in
windows scheduled task.
what to do to solve this problem.

Hi
c:\document and settings\admin>ORADIM -EDIT -SID <SID> -startmode auto -pfile D:\oradata\SID\initsid.ora
This will add few entries to the regedit
Go to regedit
HKEY_LOCALMACHINE\software\oracle
ORA_SID_PFILE=D:\oradata\SID\initsid.ora
ORA_SID_AUTOSTART=TRUE
check these values

SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012

Hi,
Please help me with the below issue, iam trying to deploy Service pack 1 on Windows 7 , 32 Bit OS
SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012 , it does gets installed of installed manually, by remoting into the machine
also it gets installed through sccm when the machine is set to english language,
Thank you
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

Hi Friends,
we are deploying the SP1 via SCCM 2012 , and the success rate is around 50 %, its a Light touch installation where user will initiate the installation via Software Center ( Web based )
i was able to gather few errors , and this are the errors which failed during SP1 Installation 0x800f0828,
some errors which sccm reports display are
11171
10008
10021-
17031 -
1602 - User Cancelled installation
113 - No more internal file identifiers available
10070 - File handle reference is no longer available
10050 - A socket operation encountered a dead network
11170 - The task sequence manager could not successfully complete execution of the task sequence
i could not find the reason for some of the errors, also i am looking for a fix/woraround if any
Also i have noticed that in few computers the task seq failed at a place where after the sp1 installation a reboot happens and then PGP BYPASS utility is uninstalled, it did not start the PGP bypass uninstall after reboot
is there a way to cut short the Task seq and keep it simple ?
right now its like this
1. checking for prerequisite : checks for OS Name and OS version
2. installs PGP Bootgaurd Bypass
3. System Restart
4. Installing Windows 7 Service Pack 1
5. Final Restart
6. uninstall PGP Bootgaurd Bypass
Regards
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

I am trying to delete some aps, but the delete "X" does not come up when the ap is pressed. Anyone know how I can fix?.

Hi, I am trying to delete some aps, but the delete "x" does not come up when the ap is pressed. Anyone know how to fix. Also, my ipod is turning off on its own and won't power back on unless I plug it in although it is fully charged.

For the apps:
- You can't delete the apps that came with the iPod
- Go to Settings>General>Restrictions and see if there is the Restrictions set that prevents deleting apps

Error: The e-mail server could not be reached when the system was trying to

Dear All,
I've configured the Mail Transport in Portal successfully with SMTP as MS Exchange Server and Third-party Mailing servers. But due to some licensing issues a new MS Exchange mail server have been setup replacing the existing ones.
And when i configure the Mail Transport in the system i get the below message on the eMail Window:
"Error: The e-mail server could not be reached when the system was trying to send the message!
javax.mail.MessaginException: 530 5.7.1 Client ws not authenticated
I've configured (all the steps) the same way as i used to before and restarted the server as well! Please let me know the issue to be resolved, the telnet to the mailserver is also successful. I've try'd searching SDN, didn't find the exact solution... any notes on this?
Thanks,
MS

Hi,
It will depend on your infrastructure, I am not sure and have limited knowledge on netowrks, but in my current landscape both the system were in same domain, but still i had to maintain proxy configuration.
Since it giving authentication error, it feel it could be proxy error.
Please refer below links which talks about same error :
http://java.sun.com/products/javamail/FAQ.html#smtpauth
Or else i think it is issue with port.
Regards,
Jigar Oza
Edited by: jigar oza on Jul 6, 2010 12:43 PM

ITunes does not start automatically when iPhone is connected

Have just upgraded to LION. iTuneshelper in Login items is now not found and iTunes will not start automatically when an iPhone is connected via USB.

Hi,
See this Discussion:
https://discussions.apple.com/message/15693777#15693777
Cheers,

SSH startup script when the system reboot

Hi all,
I have a script for start/stop for sshd and it is fully tested and worked well. I have create the link to rc2.d. When the system reboot, 'PRNG not seed' is shown and the sshd cannot start up after reboot. Then, I can start sshd manually. Is it possible to start the sshd automatically after reboot?
Please advise.
Thank you for your attention.

If you're running prngd daemon for entropy generation on your system, make sure prngd starts before sshd. It seems like you're able to successfully start the sshd daemon manually because prngd has already been started on systems bootup.

DS 5.2 does not startup automatically

I installed version 5.2 of the directory server and at first it was starting automatically at startup. However, it is not starting automatically anymore and I must start it manually. The /var/svc/log/milestone-multi-user:default.log is showing the following:
Executing legacy init script "/etc/rc2.d/S72directory".
There is an ns-slapd process already running: 378
However, there is not an ns-slapd process running at all. Here is what I did:
-Installed 5.2 from pkg
-ran `directoryserver configure`
-ran `ldapclient init`
-stopped the directory server with `directoryserver stop`
-ran `directoryserver ldif2db` command
-started directoryserver
-rebooted
Has anyone seen this problem before? I'm puzzled.

It is probably the start-slapd script that believes there is daemon running.
You may want to check in the instance for a pid file (in the logs directory).
If there is one while the server is not running but there is a process with that exact PID, then the script thinks the server is already running.
Just remove the PID file and everything will start as before.
Regards,
Ludovic.

Suddenly iTunes does not open automatically when I connect Ipod

Hi,
iTunes used to open automatically when I connect my Ipod but now it does not although I did not change anything to my system.
In place of iTunes I now have the Windows 7 choice dialog in which iTunes does not appear.
How come?

Open iTunes when this iPod is connected: has always been checked
I thought you said there was no such option above?
and nothing else
Okay. Head to the Start menu and choose the *Control Panel* and when it comes up choose *Hardware and Sound* from the list of options. Next choose *Change default settings for media or devices*. Scroll down to the bottom where you will find an entry for Apple iPod. Go ahead and change its action to "Take no Action." Any luck there?
I'm not quite sure why iTunes isn't opening upon connection, but we'll see where we can take this. I would start with removing iTunes and re-installing again using these instructions.
http://support.apple.com/kb/ht1925
B-rock

Animation does not play automatically when published

I am having a problem with swf files that do not play automatically in my project. Actually some do and some do not. I have the properties set to no transition and rest of slide and even tried rest of animation. The slide works when I play it but when I preview the project the animation does not start. Sometimes I can click the play button and it will play but the other objects will have started so the timing is off.
Does anyone have any suggestions to try? Thanks Emily

Welcome to our community, Emily.
Usually things pause because there is a Button, Click Box or Text Entry Box object on the slide and these objects pause the slide waiting for user interaction.
Do the slides where you are seeing animations stopping have any of these objects? If so, you may need to tweak the pause point. (indicated by the double bars ( || ).
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

CRS process does not startup automatically when the system is rebooted

Similar Messages

Maybe you are looking for