Crs processes restart problem after clusterware installation

Hi all,
I successfully installed the Oracle clusterware using two nodes, which are the Linux virtual machines created using VMWare. After reboot, the gsd and ons state on the second node is unknown:
NAME=ora.node2.gsd
TYPE=application
TARGET=ONLINE
STATE=UNKNOWN on node2
NAME=ora.node2.ons
TYPE=application
TARGET=ONLINE
STATE=UNKNOWN on node2
My questions are:
(1) what are the reasons causing this?
(2) how to resolve it so their state can be ONLINE after re-boot?
Thanks!

I'd start by looking for any "interesting" entries in the clusterware logfiles at $ORA_CRS_HOME/log/<node_name>. My guess is that you'll find something in them that will point you to the next step for debugging.
Dan

Similar Messages

  • Serious problems after Mavericks installation with External Drive Lacie P9220.

    Experiencing serious problems after Mavericks installation with External Drive Lacie P9220 1TB. Mac Finder totally locked!
    I had to format the External hard drive with a Windows PC (fat32), then format again with my IMac (mac Journal.) and hopefully restored data from time machine backup.
    So far so good but system looks unstable. Some software were not able to write on the hard drive.Some strange things happens. With Mountain Lion never had an even minor issue.
    I read many discussion regarding problems with WD, just wondering if anyone had the same problems with Lacie and if there is any tip to solve the
    problem.
    Many thanks.
    Marco

    Thanks very much for your reply.
    Unfortunately I couldn't find a solution because the article refers to whom have configured the drive with included software and drivers that came with the drive.
    This is not my case, I never used any third party soft ...only OS X disk utility ...
    best
    marco

  • Problem after SP19 Installation

    Hy guys,
    ich have the following problem after the SP19 INSTALLATION:
    I cannot see the adapter in Adapter Monitor and no communication channel works.
    I already read thread about the problem and already imported SAP_BASIS Software components but doesn't work.
    Could someone give a tip.
    Thank's a lot and a nice day.
    Mati

    type the folllwoing url
    http://<yourservrname>:<yourserverport>/mdt/channelmonitorservlet. this is checks whether the adapter is running or not.
    Regards
    Sreeram.G.Reddy

  • Core file dumping after clusterware Installation

    I am installing 11gR1 RAC on RHEL5.5 64 bit
    I have completed the clusterware installation successfully
    after the installation some core files in the format (core.ons.25383) are getting dumped and filling up the /tmp/cores filesystem henceforth / filesystem .
    I am not able to proceed further with the database installation .
    my cluster status looks like this
    [root@dbn-1 bin]# ./crs_stat -t
    Name Type Target State Host
    ora.dbn-0.gsd application ONLINE ONLINE dbn-0
    ora.dbn-0.ons application ONLINE ONLINE dbn-0
    ora.dbn-0.vip application ONLINE ONLINE dbn-0
    ora.dbn-1.gsd application ONLINE ONLINE dbn-1
    ora.dbn-1.ons application ONLINE ONLINE dbn-1
    ora.dbn-1.vip application ONLINE ONLINE dbn-1
    even then core files are being dumped .
    I am using raw devices for ocr and voting discs .

    Hi;
    For your issue i suggest close your thread here as changing thread status to answere and move it to Forum Home » Grid Computing » Real Application Clusters or Forum Home » Grid Computing » RAC, ASM & Clusterware Installation which you can get more quick response
    Regard
    Helios

  • HELP!!! "Restart" problem after installation of OS Mountain Lion

    Dear Apple People,
    I have upgraded my Macbook Pro 13 (bought last year) from Leopard to Mountain Lion. After some days my computer stopped to start normally and restarts every minute. Please see attached the photos. I have searched other topics and internet, tried to repair disks and other tools, but nothing helped...
    I would (and of course other many people who faced this problem) aprreaciate if you could give us detailed instructions how to fix this problem. It is not fair that we have installed new software and even paid for it and now cannot use it...
    I am looking forward for your prompt action!
    Thank you.

    I found it! -  under Users/....
    So now i will back up all these files.
    What should I do then?
    Follow the "step 3. If you have a backup, press Command and R keys in boot, open Disk Utility, erase the disk and install OS X" whic you have suggested earlier?
    Do i need to have cd or flash drive to install OSX or is it enough to have internet connection?

  • Pavilion dv7 4050ed - Windows Update Problems After First Installation

    I have only just today received my brand new HP Pavilion dv7 4050ed and commenced installation straight away.  There were no problems in the initial installation and I booted Windows for the first time successfully and let it do its auto installs for things like Java and Adobe Reader.  I then moved to update and patch the laptop with Windows Update but immediately noticed that something was wrong.  Upon opening Windows Update I was met with a white cross in a red shield to signify an error.  When I prompted it to "Check for Updates" I was met with an error message stating, "Windows Update cannot currently check for updates, because the service is not running.  You may need to restart your computer."  I get the same error message when I try to run Windows Live Messenger.
    After multiple restarts and checking in the control panel that the update service was allowed and working, the error message still appears whenever I try to update or patch my machine.  How can this kind of thing happen to a brand new machine that I've had for less than a day and has only had its basic settings chosen?  It simply will not update, or even recognize that the update service is available.  The internet is fully functional so it isn't any kind of connection problem.
    Has anyone got any ideas as to what the problem could be?
    I probably should just add that the laptop is a Dutch purchase with a bilingual setup.  I chose the English setup option but was advised to include this information in case it could in any way affect the update system.

    HP support provided me with the following link:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02219204&cc=nl&lc=en&dlc=en&product=4213233
    On this page there's a download called sp47845. After installing this, everything was working again.

  • Won't restart successfully after Tiger installation --- Help!

    Howdy!
    I'm finally updating to OS X from 9.2.2. Everything was humming along smoothly with the installation. My computer restarted after installation, but then hung for quite a while on the grey apple screen with the twirlygig at the bottom of the screen, and then, horror of all horrors, a big circle with a slash replaced the apple... and there it stays. I have to manually reboot the machine to get it to restart to either the old 9.2 partition or from the 10.4.3 installation DVD.
    From the Tiger DVD, I've verified and repaired the disk and permission (if didn't come up with any errors, but I repaired it anyway).
    I've re-installed the OS with all devices except the keyboard unplugged -- nothing changed.
    Any ideas?
    I'm trying to install it onto a 120 GB Maxtor internal drive that has not given me any problems in the past. The hd is partitioned for a 9 and X OS... I also still have the original 20 GB internal hd installed.
    Should I try removing RAM that was added years ago? Or installing it onto the original 20 GB hd? Or will I have to try an Erase and Install? Will this option just erase the partition set up for OS X, or will it erase the entire hard disk?
    Thanks for any assistance.
    -Jenn
    G4 AGP 450 MHz   Mac OS 9.2.x   856 RAM

    I'm actually unsure if the version of Disk Utility on the Tiger Install disc can do an erase and install on one partition of a partitioned hard drive or if the erase and install wipes the entire HD; I'll have to check into that when I can. There was in the past a known issue where OS X had to be installed on the first partition of a partitioned HD; I believe that's no longer true, but the default at startup for OS X is to look for the OS X System on the first partition (if you hold the 'x' key down at startup to boot into OS X, that's the expected location). If the OS 9 partition is the first partition, that may be throwing the OS X Install restart off. You might check to see if using Startup Manager to select the second partition works. I'd also rename the partition from "OS X" to somethhing else (say "OSTen"), just to be safe.

  • Battery Problems After Mavericks installation

    So i have a MacBook Pro 8.1.  Before i installed mavericks (under mountain lion) i was getting about 4.5 hrs on a full charge (90% brightness).  After installing Mavericks i've had several problems.
    Immediately, I received a "service battery" error.  I never had that problem before.
    Battery life seems to be jumping all over the place.  One minute it will say that i have 30% left (and literally within a span of a min of two) it will drop to 17%. (with no noticeable app draining the battery - as confirmed by activity monitor).
    The time remaining indicator takes about 5 min to indicate how much time left this is in contrast to booting in safe mode (where the indicator showed right away).
    Battery life seems about the same (i.e. on a full charge i see it at about 4 hrs - but then it quickly drops 3.5 and than back up and then back down)
    I did the following to see if i could "fix" the problem.
    a complete battery cycle (calibration). - this seemed to get rid of the "service battery" indicator at least
    a PRAM reset (x2)
    an SMC reset (x2)
    Disk / Permission verify and repair (no problems)
    I booted off a 2nd internal HD which had a copy of Mountain Lion.  The above problems were nonexistent which leads me to believe that this problem is specific to Mavericks.
    p.s. and No Spotlight (or any particular process) isn't consuming a large amount of energy.
    All that being said, anyone have any suggestions?  At this point i can't trust how much time i really have on my battery.
    For what it's worth i have installed a 3rd party SSD.  I noticed on a few different discussions that being a common thread with others having the same problem.

    I have exactly the same problem with an MacBook Pro 8.2 for first time some days after a clean Mavericks installation.
    I dont have a 2nd internal HD installed.
    We need an answer from Apple.

  • Restarting problem after upgrading to OS X

    So I just installed the new update of OS X 10.9.2
    However, for some reason or another my mac kept restarting sontaneously even though that I installed all of the updates that are available in the apple store.
    Here is a copy of the report that shows in the safe mode:
    Repot:
    Anonymous UUID:       5801FBAF-9BFD-4C82-2BC0-7E59A60F0C25
    Sat Mar 22 13:46:43 2014
    panic(cpu 2 caller 0xffffff80286526ff): "a freed zone element has been modified: expected 0xdeadbeefdeadbeef but found 0, bits changed 0xdeadbeefdeadbeef, at offset 8 of 128 in zone: kalloc.128"@/SourceCache/xnu/xnu-2422.90.20/osfmk/kern/zalloc.c:461
    Backtrace (CPU 2), Frame : Return Address
    0xffffff80a777aa00 : 0xffffff8028622fa9
    0xffffff80a777aa80 : 0xffffff80286526ff
    0xffffff80a777aae0 : 0xffffff8028651df9
    0xffffff80a777abe0 : 0xffffff802862aa6f
    0xffffff80a777ac10 : 0xffffff8028a4e1e2
    0xffffff80a777ac40 : 0xffffff8028a4e3a2
    0xffffff80a777ac70 : 0xffffff8028ab7bef
    0xffffff80a777aca0 : 0xffffff8028ab7883
    0xffffff80a777ad40 : 0xffffff8028ab740c
    0xffffff80a777ada0 : 0xffffff7fa8bf5135
    0xffffff80a777ae60 : 0xffffff7fa95d6818
    0xffffff80a777af90 : 0xffffff802880d35e
    0xffffff80a777aff0 : 0xffffff80287c4fcc
    0xffffff80a777b0f0 : 0xffffff80288001c6
    0xffffff80a777b140 : 0xffffff80287ccaa9
    0xffffff80a777b280 : 0xffffff80287d1217
    0xffffff80a777b420 : 0xffffff80287d0715
    0xffffff80a777b6e0 : 0xffffff802896b1a6
    0xffffff80a777b770 : 0xffffff80287fd9b1
    0xffffff80a777b7f0 : 0xffffff802898a8a0
    0xffffff80a777b870 : 0xffffff80287ffd50
    0xffffff80a777b8e0 : 0xffffff7fa9a7da47
    0xffffff80a777b930 : 0xffffff7fa9a7e16e
    0xffffff80a777b9a0 : 0xffffff7fa9a7e523
    0xffffff80a777b9d0 : 0xffffff8028813928
    0xffffff80a777ba00 : 0xffffff8028983748
    0xffffff80a777ba70 : 0xffffff80287fd69e
    0xffffff80a777bae0 : 0xffffff80287f486a
    0xffffff80a777bb80 : 0xffffff80287e63d5
    0xffffff80a777bc30 : 0xffffff80287e6c92
    0xffffff80a777bf50 : 0xffffff8028a3e363
    0xffffff80a777bfb0 : 0xffffff80286f3b26
          Kernel Extensions in backtrace:
             com.apple.iokit.IOStorageFamily(1.9)[9B09B065-7F11-3241-B194-B72E5C23548B]@0xff ffff7fa8be9000->0xffffff
    Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.3f10 13477, 3 services, 15 devices, 0 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: TOSHIBA MK3265GSXF, 320.07 GB
    Serial ATA Device: MATSHITADVD-R   UJ-8A8
    USB Device: Hub
    USB Device: IR Receiver
    USB Device: FaceTime HD Camera (Built-in)
    USB Device: Hub
    USB Device: Apple Internal Keyboard / Trackpad
    USB Device: BRCM2070 Hub
    USB Device: Bluetooth USB Host Controller
    Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1

    Latest report :
    Anonymous UUID:       5801FBAF-9BFD-4C82-2BC0-7E59A60F0C25
    Sat Mar 22 14:19:30 2014
    panic(cpu 1 caller 0xffffff8006e526ff): "a freed zone element has been modified: expected 0xdeadbeefdeadbeef but found 0, bits changed 0xdeadbeefdeadbeef, at offset 8 of 128 in zone: kalloc.128"@/SourceCache/xnu/xnu-2422.90.20/osfmk/kern/zalloc.c:461
    Backtrace (CPU 1), Frame : Return Address
    0xffffff80866eaa00 : 0xffffff8006e22fa9
    0xffffff80866eaa80 : 0xffffff8006e526ff
    0xffffff80866eaae0 : 0xffffff8006e51df9
    0xffffff80866eabe0 : 0xffffff8006e2aa6f
    0xffffff80866eac10 : 0xffffff800724e1e2
    0xffffff80866eac40 : 0xffffff800724e3a2
    0xffffff80866eac70 : 0xffffff80072b7bef
    0xffffff80866eaca0 : 0xffffff80072b7883
    0xffffff80866ead40 : 0xffffff80072b740c
    0xffffff80866eada0 : 0xffffff7f873f5135
    0xffffff80866eae60 : 0xffffff7f882fd818
    0xffffff80866eaf90 : 0xffffff800700d35e
    0xffffff80866eaff0 : 0xffffff8006fc4fcc
    0xffffff80866eb0f0 : 0xffffff80070001c6
    0xffffff80866eb140 : 0xffffff8006fccaa9
    0xffffff80866eb280 : 0xffffff8006fd1217
    0xffffff80866eb420 : 0xffffff8006fd0715
    0xffffff80866eb6e0 : 0xffffff800716b1a6
    0xffffff80866eb770 : 0xffffff8006ffd9b1
    0xffffff80866eb7f0 : 0xffffff800718a8a0
    0xffffff80866eb870 : 0xffffff8006fffd50
    0xffffff80866eb8e0 : 0xffffff7f88906a47
    0xffffff80866eb930 : 0xffffff7f8890716e
    0xffffff80866eb9a0 : 0xffffff7f88907523
    0xffffff80866eb9d0 : 0xffffff8007013928
    0xffffff80866eba00 : 0xffffff8007183748
    0xffffff80866eba70 : 0xffffff8006ffd69e
    0xffffff80866ebae0 : 0xffffff8006ff486a
    0xffffff80866ebb80 : 0xffffff8006fe63d5
    0xffffff80866ebc30 : 0xffffff8006fe6c92
    0xffffff80866ebf50 : 0xffffff800723e363
    0xffffff80866ebfb0 : 0xffffff8006ef3b26
          Kernel Extensions in backtrace:
             com.apple.iokit.IOStorageFamily(1.9)[9B09B065-7F11-3241-B194-B72E5C23548B]@0xff ffff7f873e9000->0xffffff7f8740dfff
             com.apple.BootCache(35.0)[3D297E74-421F-33EE-918E-071B158F8AFD]@0xffffff7f882fc 000->0xffffff7f88304fff
             com.apple.AppleFSCompression.AppleFSCompressionTypeZlib(1.0d1)[E163B7AE-F6E5-32 86-B827-66DB3FE3DB7B]@0xffffff7f88905000->0xffffff7f88908fff
    BSD process name corresponding to current thread: UserEventAgent
    Mac OS version:
    13C64
    Kernel version:
    Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
    Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
    Kernel slide:     0x0000000006c00000
    Kernel text base: 0xffffff8006e00000
    System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
    System uptime in nanoseconds: 81319711449
    last loaded kext at 54933898791: com.trendmicro.kext.KERedirect          1.0.0 (addr 0xffffff7f88bd1000, size 24576)
    loaded kexts:
    com.trendmicro.kext.KERedirect          1.0.0
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AudioAUUC          1.60
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleHDAHardwareConfigDriver          2.6.0f1
    com.apple.driver.AppleTyMCEDriver          1.0.2d2
    com.apple.driver.AGPM          100.14.15
    com.apple.driver.AppleMikeyHIDDriver          124
    com.apple.driver.AppleHDA          2.6.0f1
    com.apple.iokit.IOBluetoothSerialManager          4.2.3f10
    com.apple.driver.ApplePolicyControl          3.4.35
    com.apple.driver.AppleUpstreamUserClient          3.5.13
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.driver.AppleIntelHD3000Graphics          8.2.4
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleMikeyDriver          2.6.0f1
    com.apple.driver.AppleHWAccess          1
    com.apple.driver.AppleIntelMCEReporter          104
    com.apple.driver.AppleBacklight          170.3.5
    com.apple.driver.AppleSMCLMU          2.0.4d1
    com.apple.driver.AppleLPC          1.7.0
    com.apple.driver.AppleMuxControl          3.4.35
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleThunderboltIP          1.1.2
    com.apple.iokit.IOBluetoothUSBDFU          4.2.3f10
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.3f10
    com.apple.driver.SMCMotionSensor          3.0.4d1
    com.apple.driver.AppleIntelSNBGraphicsFB          8.2.4
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.driver.AppleMCCSControl          1.1.12
    com.apple.driver.AppleUSBTCButtons          240.2
    com.apple.driver.AppleUSBTCKeyEventDriver          240.2
    com.apple.driver.AppleUSBTCKeyboard          240.2
    com.apple.driver.AppleIRController          325.7
    com.apple.driver.AppleFileSystemDriver          3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          35
    com.apple.iokit.SCSITaskUserClient          3.6.6
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.5.1
    com.apple.driver.AppleUSBHub          666.4.0
    com.apple.driver.AirPort.Brcm4331          700.20.22
    com.apple.driver.AppleSDXC          1.5.2
    com.apple.iokit.AppleBCM5701Ethernet          3.8.1b2
    com.apple.driver.AppleFWOHCI          4.9.9
    com.apple.driver.AppleAHCIPort          3.0.0
    com.apple.driver.AppleUSBUHCI          656.4.1
    com.apple.driver.AppleUSBEHCI          660.4.0
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleACPIButtons          2.0
    com.apple.driver.AppleRTC          2.0
    com.apple.driver.AppleSMBIOS          2.1
    com.apple.driver.AppleACPIEC          2.0
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
    com.apple.nke.applicationfirewall          153
    com.apple.security.quarantine          3
    com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
    com.apple.kext.triggers          1.0
    com.apple.AppleGraphicsDeviceControl          3.4.35
    com.apple.driver.DspFuncLib          2.6.0f1
    com.apple.vecLib.kext          1.0.0
    com.apple.iokit.IOAudioFamily          1.9.5fc2
    com.apple.kext.OSvKernDSPLib          1.14
    com.apple.iokit.IOSerialFamily          10.0.7
    com.apple.iokit.IOSurface          91
    com.apple.iokit.IOBluetoothFamily          4.2.3f10
    com.apple.driver.AppleHDAController          2.6.0f1
    com.apple.iokit.IOHDAFamily          2.6.0f1
    com.apple.driver.AppleSMBusPCI          1.0.12d1
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.4.1
    com.apple.driver.AppleGraphicsControl          3.4.35
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.AppleThunderboltEDMSink          2.1.3
    com.apple.driver.AppleThunderboltDPOutAdapter          3.1.7
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.3f10
    com.apple.driver.AppleSMC          3.1.8
    com.apple.driver.IOPlatformPluginFamily          5.7.0d10
    com.apple.iokit.IOFireWireIP          2.2.6
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.iokit.IOGraphicsFamily          2.4.1
    com.apple.driver.AppleThunderboltDPInAdapter          3.1.7
    com.apple.driver.AppleThunderboltDPAdapterFamily          3.1.7
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.4.5
    com.apple.driver.AppleUSBMultitouch          240.9
    com.apple.driver.AppleUSBMergeNub          650.4.0
    com.apple.iokit.IOUSBHIDDriver          660.4.0
    com.apple.driver.AppleUSBComposite          656.4.1
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.6
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.6
    com.apple.driver.AppleThunderboltNHI          2.0.1
    com.apple.iokit.IOThunderboltFamily          3.2.7
    com.apple.iokit.IOUSBUserClient          660.4.2
    com.apple.iokit.IO80211Family          630.35
    com.apple.iokit.IOEthernetAVBController          1.0.3b4
    com.apple.driver.mDNSOffloadUserClient          1.0.1b5
    com.apple.iokit.IONetworkingFamily          3.2
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOAHCIFamily          2.6.5
    com.apple.iokit.IOUSBFamily          675.4.0
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOHIDFamily          2.0.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          278.11
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.AppleKeyStore          2
    com.apple.driver.DiskImages          371.1
    com.apple.iokit.IOStorageFamily          1.9
    com.apple.iokit.IOReportFamily          23
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform          2.0
    com.apple.iokit.IOPCIFamily          2.9
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    com.apple.kec.pthread          1
    Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.3f10 13477, 3 services, 15 devices, 0 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: TOSHIBA MK3265GSXF, 320.07 GB
    Serial ATA Device: MATSHITADVD-R   UJ-8A8
    USB Device: Hub
    USB Device: IR Receiver
    USB Device: FaceTime HD Camera (Built-in)
    USB Device: Hub
    USB Device: BRCM2070 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Apple Internal Keyboard / Trackpad
    Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1
    Anyone who can help me with such a problem?

  • [SOLVED] Several problems after fresh installation

    Hi guys,
    i just did a fresh installation of arch and every times i must do something i get this error:
    cannot remove, read, edit and etc : read-only file system
    So i searched for a workaround.. but i must do this after every boot
    This is it:
    mount -oremount,rw /
    There's a way to fix this forever?
    Often when i need to edit some files, like /etc/pacman.conf or xorg config file, arch tell me: You do not have write permission to modify... that file
    Searched another workaround.. and also this i must do every time after each boot:
    sudo chown -R black /directory of file that i'm trying to edit/
    I hope to fix this annoying problems, with your help.
    Thanks guys,
    Gabriele.
    Last edited by Lilith (2012-09-28 13:18:46)

    Ok guys,
    think solved by change my /sda6/ (root) by /mnt to / and adding a slash / before home, boot, var.
    Rebooted and try to edit the same file /etc/fstab and no warnings
    Now is like this:
    # /etc/fstab: static file system information
    # <file system> <dir>     <type>     <options>                <dump>    <pass>
    tmpfs                    /tmp        tmps        nodev,nosuid             0                0
    #UUID=blablablabla
    /dev/sda6                  /             ext4                  rw,relatime           0   1
    #UUID=blablabla
    /dev/sda9                  /home            ext4                 rw,relatime            0   2
    #UUID=blablabla
    /dev/sda5                  /boot              ext2                 rw,relatime             0   2
    #UUID=blablabla
    /dev/sda7                  /var                 reiserfs            rw,relatime             0   2
    #UUID=blablabla
    /dev/sda8                  none              swap                defaults                  0   0
    Thanks to everyone i also fixed my 2nd problem that i think is related to the first
    Last edited by Lilith (2012-09-28 13:15:43)

  • Brower problem after GPO installation

    After installing Adobe reader 9.3.0 via group policy users are getting a very annoying error in Internet Explorer telling them that their version of Adobe Reader is not the right one to open the pdf file and they should download version 8 or 9.
    I also tracked down the problem to the missing registry key "HKEY_CLASSES_ROOT\Software\Adobe\Acrobat\Exe". The default value of this key should be pointing to the installation directory.
    To be extra sure i checked the transform with the customization wizard and as value it has "[AS_HKCR_EXE]" so i'm at a loss why it doesn't appear on clients.
    Besides the problem of the browser, everything in the transform works, EULA preaccepted and other stuff i set up.
    I used GPO so that i don't have to walk by all 80 computers, but due to this problem i still have to visit every computer to repair this registry key.

    type the folllwoing url
    http://<yourservrname>:<yourserverport>/mdt/channelmonitorservlet. this is checks whether the adapter is running or not.
    Regards
    Sreeram.G.Reddy

  • Direct X Problem after Parallels Installation!

    This is extremely urgent and any help would be apppreciated!
    I was running Bootcamp with Windows Vista smoothly until I decided to install Parallels 4.0 on my Mac 10.5.8. After installing Parallels, it loaded my Bootcamp installation which sort of freaked me out and so I closed Parallels without doing too much. When I booted Vista today, I tried running games that requried Direct X or enhanced graphics and they are not working! These games used to work fine before I had installed Parallels! I even tried fixing the Bootcamp installation by repairing the drivers through the installation cd that came with Leopard, but I still get the same problem!
    An example: I try running Project64, and it gives me a Direct X error 8876086A, stating that plugins are missing.
    Some games crash back to desktop without any error.
    *Please help!*

    Hi and welcome to Discussions,
    I admit I never allowed Parallels to use my BootCamp Windows, but this sounds to me like Parallels has somehow altered the state/version of DirectX in your BootCamp Windows, since Parallels only has support for DX 8.1 .
    Have you run a 'DXDiag' to check the DX system on your Vista ?
    Regards
    Stefan

  • Startup problem after driver installation!

    windows 2000 server will not start properly with the tvanywhere master card drivers installed.  It used to work properly with a k7n2g-ilsr with the integrated graphics controller.  It also worked with the Radeon card with that motherboard.  Although that installation seemed to degrade-- initially, I could watch TV on a 2nd monitor and play a game on the primary monitor, but for an unknown reason, after some time, the system would blue screen and reboot.
    I then switched to the current MSI motherboard k7n2 Delta and it no longer works.   When I start windows now, it takes a very long time to start and then I cannot log on.  I reinstalled windows 2000 server and experienced the same problem.  I tried the tv card in slot 2 initially, and the machine would loop from the "press ctrl-alt-del" screen to the login screen.  After entering the password, it would go back to the ctrl-alt-del screen.  are there any known incompatibilities with the ATI radeon chips? I have also tried earlier versions of the graphics drivers with no success.  After putting the card in slot 2, I got past the login screen but it then hang without being able to load the taskbar.  
     in order to boot, I have to start in safe mode and disable the drivers to start up.  I have been able to boot by disabling the audio capture device on the card , but i cannot use the msipvs software to take advantage of the card.
    I have installed the card in another system (the one that is currently using th eoriginal msi motherboard (k7n2g-ilsr) but I need it to work with this system.
    Please help!  Thank you!
    Athlon XP 2200+ (1.8ghz)
    msi k7n2 Delta
    512 mb DDR ram
    adaptec 2940 UW contoller
    pci modem
    MS windows 2000 server sp4

    I changed power supplies after the one I had died, and I put in a new power supply.  It worked for about 1 week and then it caused windows2000 to crash while starting up and reboot over and over.  :(  I tried a new 450w power supply and it does the same thing.  :( 

  • Problems after new installation (Runtime workbench not working as expected)

    Hello
    We have just finished installing new ECC & Netweaver in our company.
    On PI side, I created a sample file (Payload) and did IR and ID configuration
    and saw the payload getting picked up from the source directory and getting
    posted in the target directory successfully.
    However, when I went to Runtime Workbench and clicked on the Adapter and
    File adapter to see the messages, I dont see anything. It is just blank.
    However, when I click on Display it shows integration server and 4 items under it. 4th item is Adapter Engine which has a RED button next to it, indicating there is some problem.
    When I click on the Adapter button to see the list of adapters, i see again a red button next JPR. However, File doesn't show any error message. But when I double click on File adapter, instead of showing successful messages, it shows a blank screen as if no file has been transmitted.
    Also down at the bottom of the Runtime Work Bench Screen
    Self-Tast Status and
    Are Communication Channels without errors
    also show a Red buttons next to it.
    By double clicking on 'Are communication Channels without errors - Details", I get the following error message:
    1 communication channels have an error status0 communication channels inactive0 communication channels not providing any status information0 adapters logging communication-channel-independent processing errors .
    This is a fresh new install and any feedback on this will be greatly appreciated.
    Thanks

    Not answered completely. But still closing to make room for new questions

  • Flickering problem after re-installation of Premiere

    I re-installed Premiere and opened a project file that I edited before the re-installation.
    Playing of the movie looked no problem in the Premiere. But when I exported it, the movie
    flickered a lot, keeping images going back and forth. I tried in various formats and frame rates,
    but every time they came to same results.
    Please let me know how to fix the if there are someone who experienced same problem.
    Thanks
    Wonpyo

    Hi
    I dont understand what the problem is. The Toshiba units are delivered with a Recovery CD. The Windows OS on this recover CD is already activated and its not necessary to activate anything.
    If you use the original Windows from Microsoft CD so you have to activate this OS. But this is not a Toshiba problem. You have to contact the Microsoft.
    Note: You can not activate Windows OS from the original Microsoft CD with the Toshiba image number or something like that!
    Bye

Maybe you are looking for

  • Help, i cant sign into my itunes account or purchase anything

    Im not sure if this have been posted recently or not but im having problems with my itunes. it wont let me sign into my account. it doesnt even give me a reason for it. i cant purchase. if i click purchase my sign in will pop up and i'll enter my pas

  • MSI GT70 2OD eSATA Port

    I might be asking a stupid question here but where is the eSATA port on the MSI GT70 2OD? On the MSI website under specification it states (sorry can't seem to post a hyperlink): eSATA                          1 eSATA/USB  Combo     1 If it is one of

  • How I can make safari saving only users or emails from the login?

    Hello I want that safari will save my emails and users that when I will type in login form the first character of my user or email it will show me the emails or users that start with this character. I know that there is an option in the settings for

  • People and Business Widgets Not Working

    Hi, My people and business widgets have stopped working. Instead of having fields to enter name, zip, etc., there are blue boxes (that look like legos) with questions marks. I have read elsewhere that this means a needed plugin is missing. Removing a

  • Webcam go plus "enable to download images"

    i have an imortant pictures in my creative webcam video blaster go plus but a message show me "enable to download images" when i try to download it. if any one have a solution to recover my pictures! plz help! thanks a lot.