CRS should not Starts at SYSTEM Boot

Hi Experts,
i have two node RAC. actulayy when i need to reboot my server then i need to stop services and clusterware manullay but when system is restarted/rebooted all CRS services and nodesapp started. so dun want these services starts when system rebooted automatically i want i start all manullay..so please tell me how i can achive this
my clusterware 10.2.0.4
db 10.2.0.4
and O/S is AIX6.1 64bit
regards,

It is a simple matter to force manual restart. Look in the docs for 10.2 and find the name of the script used to configure autorestart ... it will be owned by root ... and make the appropriate changes.
Could I tell you the name? Yep. Will I? No. And the reason is not to be cruel but rather you need to read these docs and understand the script before you do what you are contemplating.
Remember the entire point of RAC is high availability. What you are suggesting you want to do turns high availability into high availability ONLY if a qualified Oracle DBA happens to be available. I presume you never get sick, never take day off, never take a holiday, and will never quit. If my assumptions are incorrect ... you might want to reconsider your plans.

Similar Messages

Crs will not start on 10.2.0.3

Hi All !
RHEL 4 AS U2, 2.6.9-42.0.3.EL
After installation of a patch 10.2.0.3 it has ceased to be started crs.
[root@racnode1 init.d] ./init.crs start
Startup will be queued to init within 30 seconds
Thus crs will not start
cd /u01/app/oracle/product/10.2.0/crs/install
[root@racnode1 install] ./root102.sh
All fades on string "Starting will be queued to init withhin 30 seconds"
In crsd.log:
2007-02-01 12:11:53:10.143 [ COMMCRS][2808851376]clsc_connect (0x8b5b930) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth))
Help me please !!!

We experienced the same failure with CRS a none start after the patch (from 10.2.0.1 to 10.2.0.3)-- running RH 4.3 with Linux 2.6.9-42.ELsmp on 32 bit HP boxen. SELINUX is very disabled! Logging is no help. Could there be a connection with the following?:
11.8 VIP May Relocate to the Last Node While Upgrading Oracle
Clusterware
Rolling upgrade or upgrade of Oracle Clusterware to 10.2.0.3 patch set
may cause VIP to move to the last node.
Workaround:
Enter the following command to relocate the VIP to the preferred node:
crs_relocate VIP Resource
Then try to restart the CRS daemons
This issue is tracked with Oracle bug 5673067.
However, I cannot find a bug with that id...
Hope an answer is forthcoming, as this is holding up the proof-of-concept test for a mid-sized project...
Thanks

A name should not start with any special characters

I need to put a condition in iF statement such that a name that is given by the user should not start with any special charecters.A dialog box should display indicating this conditon.Can u plz give sample code for this.My code is as below.
//text box for giving the name
JTextFeild ReportNameText;
//the name is stored in String
String name=ReportNameText.getText();
//Here tell me how the if condition should be written
//condition to be mentioned

Already asked, and answered, here: http://forum.java.sun.com/thread.jspa?threadID=727919
See reply 4 in that thread, and scsi-boy's suggestion of writing another
method to check for "special" characters. And the links to the String
and Character API documentation given.

Workflow question: workflow should not start

Hi,
I have a question about a workflow.
Function module YTE_CHECK_WF_START starts a workflow for the approval of travel expenses.
In table "yte_start_wf", we have defined a list of users for which the workflow should not start.
Nevertheless, the workflow starts for a user who appears on the list. He gets e-mails in his Inbox, which should not happen.
What can be the reason?
Does anyone have an idea?
Thank you.
Kind regards,
Linda

Hi,
Thank you for your reply.
I am not familiar with workflow.
1) Where can I find the agents/possible agent list?
2) Where can I exclude the user in the task?
Thanks.
Kind regards,
Linda

CRS could not start after reboot

I installed oracle 10g R2 RAC on RHEL4 U4 with 2 nodes. It runs fine on 2 nodes (without reboot after installation). But when I rebooted one node, I found that the CRS daemon could not start automatically. The boot menu show "Starting CRS" [OK]. The "init.crs start" command won't init the CRS daemon.
$ ./crs_stat
CRS-0184: Cannot communicate with the CRS daemon.
SQL> conn / as sysdba
Connected to an idle instance.
SQL> startup
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA1/RAC/spfileRAC.ora'
ORA-17503: ksfdopn:2 Failed to open file +DATA1/RAC/spfileRAC.ora
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
$ /etc/init.d/init.crs start
Startup will be queued to init within 90 seconds.
$ cat /etc/inittab
id:5:initdefault:
# Run xdm in runlevel 5
x:5:respawn:/etc/X11/prefdm -nodaemon
h1:35:respawn:/etc/init.d/init.evmd run >/dev/null 2>&1 </dev/null
h2:35:respawn:/etc/init.d/init.cssd fatal >/dev/null 2>&1 </dev/null
h3:35:respawn:/etc/init.d/init.crsd run >/dev/null 2>&1 </dev/null
$ ls /etc/rc5.d
K01tog-pegasus K35smb K85mdmpd S05openibd S18rpcidmapd S55sshd S96readahead
K02NetworkManager K35vncserver K87auditd S06cpuspeed S19rpcgssd S56rawdevices S97messagebus
K05saslauthd K35winbind K87ipmi S08arptables_jf S19vmware-tools S56xinetd S97rhnsd
K10dc_server K40smartd K89netplugd S08iptables S25netfs S58ntpd S98cups-config-daemon
K10psacct K50ibmasm K90bluetooth S09isdn S26apmd S80sendmail S98haldaemon
K12dc_client K50netdump K94diskdump S10network S26lm_sensors S85gpm S99local
K15httpd K50snmpd K96pcmcia S12syslog S27vasd S90crond
K20nfs K50snmptrapd S00microcode_ctl S13irqbalance S28autofs S90xfs
K24irda K50tux S01sysstat S13portmap S29oracleasm S95anacron
K25squid K73ypbind S04readahead_early S14nfslock S44acpid S95atd
K30spamassassin K74nscd S05kudzu S15mdmonitor S55cups S96init.crs
Do I miss any configuration to initialize the CRSD at boot?
thanks, ezlee

did you run cluster verification utility for node connectivity?
http://docs.oracle.com/cd/E11882_01/rac.112/e16794/cvu.htm#autoId19
also check the logs ad $GRID_HOME/log/<hostname>/...
starting with alert.log, then the ones its referencing

LaCie ext drives not starting up on boot

I have 4 LaCie drives that do not automatically turn on mount when I power up my tower:
2TB LaCie BIGGER U2&F4&F8 EXTR 7200RPM 16MB US
Big Disk
d2 Hard Drives
When I have connected my older 17" PowerBook, the drives start up on boot and turn off at shutdown as they should. This action also occurred successfully on my previous G5 tower running Tiger. This is not occurring on my current G5 tower (Mac Pro).
Both systems are running Leopard, but the 17" PB is NOT the Intel processor like the tower.
All firmware has been updated on the external drives per LaCie's instructions, and they are now suggesting I turn this issue over to Apple to figure out.
The drives work fine, and I can turn them on manually when I boot the machine, but I just want my automatic turn on and turn off back.
Suggestions?

Ok here's the output after a fresh boot.
ben@arch-desktop:~$ systemctl status [email protected] -l
[email protected] - PS3 Media Server
Loaded: loaded (/usr/lib/systemd/system/[email protected]; enabled)
Active: active (running) since Wed 2014-03-05 22:20:11 EST; 1min 8s ago
Main PID: 601 (java)
CGroup: /system.slice/system-pms.slice/[email protected]
└─601 java -Xmx768M -Xss1024k -Dfile.encoding=UTF-8 -Djava.net.preferIPv4Stack=true -Djna.nosys=true -classpath update.jar:pms.jar net.pms.PMS
Mar 05 22:20:20 arch-desktop PMS.sh[601]: at java.lang.Thread.run(Thread.java:744) [na:1.7.0_51]
Mar 05 22:20:21 arch-desktop PMS.sh[601]: ERROR 2014-03-05 22:20:21.264 [UPNPHelper] UPNP network exception
Mar 05 22:20:21 arch-desktop PMS.sh[601]: java.net.SocketException: No such device
Mar 05 22:20:21 arch-desktop PMS.sh[601]: at java.net.PlainDatagramSocketImpl.join(Native Method) ~[na:1.7.0_51]
Mar 05 22:20:21 arch-desktop PMS.sh[601]: at java.net.AbstractPlainDatagramSocketImpl.join(AbstractPlainDatagramSocketImpl.java:178) ~[na:1.7.0_51]
Mar 05 22:20:21 arch-desktop PMS.sh[601]: at java.net.MulticastSocket.joinGroup(MulticastSocket.java:319) ~[na:1.7.0_51]
Mar 05 22:20:21 arch-desktop PMS.sh[601]: at net.pms.network.UPNPHelper$2.run(UPNPHelper.java:384) ~[pms.jar:1.90.1]
Mar 05 22:20:21 arch-desktop PMS.sh[601]: at java.lang.Thread.run(Thread.java:744) [na:1.7.0_51]
Mar 05 22:21:05 arch-desktop PMS.sh[601]: INFO 2014-03-05 22:21:05.376 [UPNPHelper] No IP filter specified, access granted to /192.168.1.42
Mar 05 22:21:05 arch-desktop PMS.sh[601]: INFO 2014-03-05 22:21:05.377 [UPNPHelper] Using the following UUID configured in PMS.conf: 6ed45cde-e5fa-4e6b-a419-306a122aba82

[Solved] Network does not starts on every boot

Yet another problem on fresh arch...
Network service does not starts every time I booting my headless. For every 10 attempts service starts 5 or 6 times only.
Ping says: Networking unreachable.
systemctl status network:
network.service - Static IP Connectivity
Loaded: loaded (/etc/systemd/system/network.service; enabled)
Active: inactive (dead)
'systemctl start network' just hangs. In order to get it start I have to reboot the box hoping next boot service will start.
I am not using dhcp (if it makes a sence). Service was configured as described in wiki for static IP assigning.
The config itself:
[Unit]
Description=Static IP Connectivity
Wants=network.target
Before=network.target
BindsTo=sys-subsystem-net-devices-enp4s1.device
After=sys-subsystem-net-devices-enp4s1.device
[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/sbin/ip link set dev enp4s1 up
ExecStart=/sbin/ip addr add 192.168.1.5/24 dev enp4s1
ExecStart=/sbin/ip route add default via 192.168.1.1
ExecStop=/sbin/ip addr flush dev enp4s1
ExecStop=/sbin/ip link set dev enp4s1 down
[Install]
WantedBy=multi-user.target
What's wrong?
Thanks in advance for any help.
Last edited by chord (2013-06-03 17:04:55)

Thaks for your reply.
I got this interface name from ip addr, how it should be named if 'enp4s1' is wrong?
journalctl is here: http://bpaste.net/show/104083/
I found only one string realted to this device name:
Jun 03 15:18:23 localhost systemd[1]: Expecting device sys-subsystem-net-devices-enp4s1.device...
Is there some other logs where it can be checked?

Dhcpcd does not start automatically on boot

Hi everyone,
I have just installed Arch (64 bit) and am running on a dynamic, wired connection.
I followed the Beginners' Guide and enabled the dhcpcd service during the installation so that it would start automatically on boot.
systemctl enable [email protected]
However, I currently must issue the command "dhcpcd" each boot before the internet starts to work.
Does anyone know how I can automate this process or if I need to further configure my network connection?
Thank you in advance.
Last edited by Ipozya (2012-11-15 11:29:05)

foppe wrote:
Check the output from
# systemctl status [email protected]
to debug the issue you're experiencing.
% sudo systemctl status [email protected]
[email protected] - dhcpcd on eth0
Loaded: loaded (/usr/lib/systemd/system/[email protected]; enabled)
Active: failed (Result: exit-code) since Tue, 2012-11-15 20:38:16 GMT; 27 sec ago
Process: 244 ExecStart=/sbin/dhcpcd -A -q -w %I (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/[email protected]/eth0
Nov 15 20:37:47 arch dhcpcd[244]: eth0: sending IPv6 Router Solicitation
Nov 15 20:37:47 arch dhcpcd[244]: eth0: sendmsg: Cannot assign requested address
Nov 15 20:37:47 arch dhcpcd[244]: eth0: broadcasting for a lease
Nov 15 20:37:51 arch dhcpcd[244]: eth0: sending IPv6 Router Solicitation
Nov 15 20:37:55 arch dhcpcd[244]: eth0: sending IPv6 Router Solicitation
Nov 15 20:37:59 arch dhcpcd[244]: eth0: sending IPv6 Router Solicitation
Nov 15 20:37:59 arch dhcpcd[244]: eth0: no IPv6 Routers available
Nov 15 20:38:16 arch dhcpcd[244]: timed out
Nov 15 20:38:16 arch systemd[1]: Failed to start dhcpcd on eth0.
Nov 15 20:38:16 arch systemd[1]: Unit [email protected] entered failed state
Dhclient did not work automatically on boot either.
Others seem to have experienced similar issues but I don't see any real solutions in any of these posts, despite being marked as solved. For example, adding "-t 120" to the dhcpcd start line in /usr/lib/systemd/system/[email protected] did not work for me.
I also tried the following but it did not work either and I had to issue "dhcpcd" before internet started working.
Install and configure wired and wireless networking
# pacman -S netcfg ifplugd
# cd /etc/network.d
# ln -s examples/ethernet-dhcp .
Make sure the WIRED_INTERFACE and WIRELESS_INTERFACE lines is uncommented
# nano /etc/conf.d/netcfg
# systemctl enable net-auto-wired.service
# pacman -S wireless_tools wpa_supplicant wpa_actiond dialog
# systemctl enable net-auto-wireless.service
https://bbs.archlinux.org/viewtopic.php?pid=1176656
https://bbs.archlinux.org/viewtopic.php?pid=1189587
https://bbs.archlinux.org/viewtopic.php?pid=1180192
Last edited by Ipozya (2012-11-15 21:08:03)

Btsync not starting correctly at boot

Hi all,
I have installed Btsync with the help of this nice guide:
https://wiki.archlinux.org/index.php/BitTorrent_Sync
Running this on the RaspberryPi.
And it starts when I boot but it does not show any logs (systemctl status btsync@username) and the GUI does not work until I do a
systemctl restart btsync@username
What shall I do?
Regards
Kristofer

Service file: [email protected]
[Unit]
Description=Bittorent Sync service for %i
After=network.target
[Service]
User=%i
ExecStart=/usr/bin/btsync --config %h/.config/btsync/btsync.conf --nodaemon
Restart=on-abort
[Install]
WantedBy=multi-user.target
After a reboot when the btsync does not work:
systemctl status btsync@xx
[email protected] - Bittorent Sync service for xx
Loaded: loaded (/usr/lib/systemd/system/[email protected]; enabled)
Active: active (running) since Thu 1970-01-01 01:00:23 CET; 44 years 0 months ago
Main PID: 143 (btsync)
CGroup: /system.slice/system-btsync.slice/[email protected]
`-143 /usr/bin/btsync --config /home/xx/.config/btsync/btsync.c...

Grid on a standalone server Cluster daemons not starting during server boot

Hi!I have installed Oracle Grid on a standalone server and setup Oracle db 11.2.0.2 on Oracle Linux 6.2 64 bit server.When I reoot the server and run crs_stat -t,several daemons havent started thus the ASM and db instances are also down as below
Name Type Target State Host
ora.DATA.dg ora....up.type OFFLINE OFFLINE
ora.FRADG.dg ora....up.type OFFLINE OFFLINE
ora....ER.lsnr ora....er.type ONLINE ONLINE amldb01dc
ora.amldb.db ora....se.type OFFLINE OFFLINE
ora.asm ora.asm.type OFFLINE OFFLINE
ora.cssd ora.cssd.type ONLINE OFFLINE
ora.diskmon ora....on.type ONLINE OFFLINE
ora.evmd ora.evm.type ONLINE ONLINE amldb01dc
ora.ons ora.ons.type OFFLINE OFFLINE
I am forced to manually start the daemons via command crsctl start resource -all then I manually start the ASM and db instances.
Yet when I run the commands
crsctl config has
CRS-4622: Oracle High Availability Services autostart is enabled.
crsctl check has
CRS-4638: Oracle High Availability Services is online.
Thus I would assume the daemons would start automatically during boot.
How can I resolve this?

crstcl check crs seems not to be applicable to single instance but for RAC,since I have a single instance db,the output of the command is as below
crsctl check crs
Parse error:
'crs' is an invalid argument
Brief usage:
crsctl check has
Check status of OHAS.
There is no crsd.log in path /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/crsd.The output of crs_stat -t is already posted in initial post and output of entire alert log is as below
2012-07-03 16:18:35.975
[client(8182)]CRS-2101:The OLR was formatted using version 3.
2012-07-03 16:18:36.471
[client(8218)]CRS-1001:The OCR was formatted using version 3.
[client(8293)]CRS-10001:CRS-6021: No msg for has:crs-6021 [l][unlimited]
[client(8294)]CRS-10001:CRS-6021: No msg for has:crs-6021 [n][65536]
2012-07-03 16:18:42.528
[ohasd(8291)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-03 16:18:42.538
[ohasd(8291)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-03 16:18:51.271
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(8465)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:1:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:18:52.299
[evmd(8479)]CRS-1401:EVMD started on node amldb01dc.
[client(8520)]CRS-10001:03-Jul-12 16:18 ACFS-9459: ADVM/ACFS is not supported on this OS version: 'error: file /etc/SuSE-release: No such file or directory
[client(8889)]CRS-10001:03-Jul-12 16:19 ACFS-9459: ADVM/ACFS is not supported on this OS version: 'error: file /etc/SuSE-release: No such file or directory
2012-07-03 16:19:22.600
[cssd(9014)]CRS-1713:CSSD daemon is started in local-only mode
2012-07-03 16:19:31.128
[cssd(9014)]CRS-1601:CSSD Reconfiguration complete. Active nodes are amldb01dc .
[client(10038)]CRS-10001:03-Jul-12 16:25 ACFS-9459: ADVM/ACFS is not supported on this OS version: 'error: file /etc/SuSE-release: No such file or directory
2012-07-03 16:34:13.791
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(8465)]CRS-5010:Update of configuration file "/u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/oratab.bak.amldb01dc" failed: details at "(:CLSN00011:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-03 16:37:39.674
[ohasd(8291)]CRS-2765:Resource 'ora.DATA.dg' has failed on server 'amldb01dc'.
2012-07-03 16:37:43.636
[ohasd(8291)]CRS-2767:Resource state recovery not attempted for 'ora.asm' as its target state is OFFLINE
2012-07-03 16:38:06.905
[cssd(9014)]CRS-1603:CSSD on node amldb01dc shutdown by user.
2012-07-03 16:38:07.006
[cssd(9014)]CRS-1660:The CSS daemon shutdown has completed
2012-07-03 16:38:10.118
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(8465)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-03 16:42:09.578
[ohasd(4827)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-03 16:42:09.649
[ohasd(4827)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-03 16:42:10.437
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:2:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:42:10.667
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-03 16:42:40.463
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5818:Aborted command 'check for resource: ora.DATA.dg amldb01dc 1' for resource 'ora.DATA.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:42:40.464
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5818:Aborted command 'check for resource: ora.FRADG.dg amldb01dc 1' for resource 'ora.FRADG.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:42:54.641
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5046)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:4:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:42:55.675
[evmd(5060)]CRS-1401:EVMD started on node amldb01dc.
2012-07-03 16:54:35.840
[cssd(5256)]CRS-1713:CSSD daemon is started in local-only mode
2012-07-03 16:54:44.396
[cssd(5256)]CRS-1601:CSSD Reconfiguration complete. Active nodes are amldb01dc .
2012-07-03 16:54:56.832
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5046)]CRS-5010:Update of configuration file "/u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/oratab.bak.amldb01dc" failed: details at "(:CLSN00011:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:03:53.530
[ohasd(4827)]CRS-2767:Resource state recovery not attempted for 'ora.asm' as its target state is OFFLINE
2012-07-04 10:04:02.701
[cssd(5256)]CRS-1603:CSSD on node amldb01dc shutdown by user.
2012-07-04 10:04:02.809
[cssd(5256)]CRS-1660:The CSS daemon shutdown has completed
2012-07-04 10:04:03.008
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5046)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:07:48.492
[ohasd(4698)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-04 10:07:48.534
[ohasd(4698)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-04 10:07:49.059
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4946)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:1:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:07:49.192
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4946)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:08:19.085
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4946)]CRS-5818:Aborted command 'check for resource: ora.DATA.dg amldb01dc 1' for resource 'ora.DATA.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:08:19.093
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4946)]CRS-5818:Aborted command 'check for resource: ora.FRADG.dg amldb01dc 1' for resource 'ora.FRADG.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:08:33.278
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5053)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:4:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:08:34.319
[evmd(5069)]CRS-1401:EVMD started on node amldb01dc.
2012-07-04 10:27:13.716
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5053)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:30:57.260
[ohasd(4619)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-04 10:30:57.280
[ohasd(4619)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-04 10:30:57.660
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:1:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:30:57.784
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:31:27.685
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5818:Aborted command 'check for resource: ora.FRADG.dg amldb01dc 1' for resource 'ora.FRADG.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:31:27.685
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5818:Aborted command 'check for resource: ora.DATA.dg amldb01dc 1' for resource 'ora.DATA.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:31:41.868
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5168)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:4:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:31:42.916
[evmd(5184)]CRS-1401:EVMD started on node amldb01dc.
2012-07-04 10:39:17.166
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5168)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:43:01.219
[ohasd(4575)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-04 10:43:01.240
[ohasd(4575)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-04 10:43:01.643
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4971)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:1:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:43:01.781
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4971)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:43:31.680
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4971)]CRS-5818:Aborted command 'check for resource: ora.FRADG.dg amldb01dc 1' for resource 'ora.FRADG.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:43:31.680
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4971)]CRS-5818:Aborted command 'check for resource: ora.DATA.dg amldb01dc 1' for resource 'ora.DATA.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:43:45.864
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5120)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:4:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:43:46.915
[evmd(5136)]CRS-1401:EVMD started on node amldb01dc.

I can not start SAP system

I have problem about starting SAP system. I executed stopsap command. After that I rebooted the HPUX system. And I try to execute startsap command.System gives me
message below.
brckxits:bxdadm 22> startsap
Checking ORC Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
17:27:59 11.04.2007   LOG: Effective User Id is root
This is Saposcol Version COLL 20.90 700 - v2.05 for HP-UX - 28.7.2006
Usage: saposcol -l: Start OS Collector
        saposcol -k: Stop OS Collector
        saposcol -d: OS Collector Dialog Mode
        saposcol -s: OS Collector Status
The OS Collector (PID 2240) is already running .....
saposcol already running
ABAP Database ORC must be started on remote server
brckxits:bxdadm 23>

Hi,
I get a following message when i try to start SAP using STARTSAP.
maltr35:sbdadm 16> startsap
Checking SBD Database
ABAP Database is not available via R3trans
Checking SBD Database
Starting SAP-Collector Daemon
This is Saposcol Version COLL 20.94 640 - AIX v10.35 5L-64 bit 070216
Usage: saposcol -l: Start OS Collector
        saposcol -k: Stop OS Collector
        saposcol -d: OS Collector Dialog Mode
        saposcol -s: OS Collector Status
The OS Collector (PID 4448328) is already running .....
saposcol already running
Running /usr/sap/SBD/SYS/exe/run/startdb
Trying to start SBD database ...
Log file: /home/sbdadm/startdb.log
/usr/sap/SBD/SYS/exe/run/startdb: Terminating with error code 12
DB startup failed
The STARTDB.LOG states that the DATABASE is already OPEN with error code 0012.
<b>I tried to start the oracle manually and tried starting sap using startsap R3. then it gives me the following error. </b>
maltr35:sbdadm 15> startsap R3
Checking SBD Database
ABAP Database is not available via R3trans
Checking SBD Database
Starting SAP-Collector Daemon
This is Saposcol Version COLL 20.94 640 - AIX v10.35 5L-64 bit 070216
Usage: saposcol -l: Start OS Collector
        saposcol -k: Stop OS Collector
        saposcol -d: OS Collector Dialog Mode
        saposcol -s: OS Collector Status
The OS Collector (PID 4448328) is already running .....
saposcol already running
Database SBD must be started first
ALSO STARTED THE LISTERNER AND STARTED THE DATABASE AND TRIED STARTING SAP STILL IT FAILS WITH THE FIRST ERROR MESSAGE MENTIONED ABOVE, KINDLY LET ME KNOW WHAT SHOULD BE DONE.

CRS Can not start instance PRKP-1001

Hello
I have a 2 node database and on the first node I can not start the instance using srvctl start instance it gives the following error: PRKP-1001 : Error starting instance htdb1 on node telepin1. When I start it using sqlplus it is ok.
Can someone please explain?
Thanks

Do you also see CRS-0215? There's a known problem , when parameter sqlnet.inbound_connect_timeout is set in sqlnet.ora, it should be unset. Unfortunately the error is a little bit generic, if this parameter is currently not set, you have another problem.
Werner

Recovery Manager fail to start at system boot when pressing F11 in HP mini 210

Product Name : HP mini 210-1118TU
Product Number: CNF01784X4
OS: 7 starter 32 bit
When i press F11 at system boot, it give error message :
" windows could not start because the following file is missing or corrupted
<windows root>\System32\hal.dll.
please re-install a copy of the above file."
Before it I install Windows XP pro, then I use system recover option in my system recover disc to restore my original OS .Afetr it I face some startup issue like "Boot device not found" & "Hard disk not exist" which was solved by F10->Hard disk test & Memory test.
Please, help me to solve it

Factory Reset will wipe all partitions and restore it to a factory state (just like it was when shipped from HP), recovery partition included.

Nautilus will not Start after system update

I just updated my system with "pacman -Syu" and it now will not open the nautilus file manager. Looking inside the journal it shows the following error:
gnome-session[647]: Window manager warning: Log level 16: AT-SPI: Error in GetItems, sender=(null), error=Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Here is a list of files that was just upgraded:
[2014-08-31 15:27] [PACMAN] Running 'pacman -Syu flashplugin'
[2014-08-31 15:27] [PACMAN] synchronizing package lists
[2014-08-31 15:27] [PACMAN] starting full system upgrade
[2014-08-31 15:28] [ALPM-SCRIPTLET] >>
[2014-08-31 15:28] [ALPM-SCRIPTLET] >> If you have an NVIDIA card that supports libvdpau or Broadcom Crystal HD chips,
[2014-08-31 15:28] [ALPM-SCRIPTLET] >> uncomment EnableLinuxHWVideoDecode=1 from /etc/adobe/mms.cfg.
[2014-08-31 15:28] [ALPM-SCRIPTLET] >> If you run into problems, please contact nVidia or Broadcom along with your system config info / driver version.
[2014-08-31 15:28] [ALPM-SCRIPTLET] >>
[2014-08-31 15:28] [PACMAN] installed flashplugin (11.2.202.400-1)
[2014-08-31 15:28] [PACMAN] upgraded avahi (0.6.31-12 -> 0.6.31-13)
[2014-08-31 15:28] [PACMAN] upgraded bash (4.3.022-1 -> 4.3.024-1)
[2014-08-31 15:28] [PACMAN] upgraded bluez (5.22-1 -> 5.22-2)
[2014-08-31 15:28] [PACMAN] upgraded poppler (0.26.3-1 -> 0.26.4-1)
[2014-08-31 15:28] [PACMAN] upgraded cups-filters (1.0.57-1 -> 1.0.58-1)
[2014-08-31 15:28] [PACMAN] upgraded libgcrypt (1.6.1-1 -> 1.6.2-1)
[2014-08-31 15:28] [PACMAN] upgraded libsystemd (215-4 -> 216-1)
[2014-08-31 15:28] [PACMAN] upgraded systemd (215-4 -> 216-1)
[2014-08-31 15:28] [PACMAN] upgraded device-mapper (2.02.109-1 -> 2.02.109-2)
[2014-08-31 15:28] [PACMAN] upgraded libtasn1 (4.0-1 -> 4.1-1)
[2014-08-31 15:28] [PACMAN] upgraded gnutls (3.3.6-1 -> 3.3.7-1)
[2014-08-31 15:28] [PACMAN] upgraded gstreamer (1.4.0-1 -> 1.4.1-1)
[2014-08-31 15:28] [PACMAN] upgraded gst-plugins-base-libs (1.4.0-1 -> 1.4.1-1)
[2014-08-31 15:28] [PACMAN] upgraded gst-libav (1.4.0-2 -> 1.4.1-1)
[2014-08-31 15:28] [PACMAN] upgraded gst-plugins-bad (1.4.0-1 -> 1.4.1-1)
[2014-08-31 15:28] [PACMAN] upgraded gst-plugins-base (1.4.0-1 -> 1.4.1-1)
[2014-08-31 15:28] [PACMAN] installed zita-alsa-pcmi (0.2.0-1)
[2014-08-31 15:28] [PACMAN] installed zita-resampler (1.3.0-2)
[2014-08-31 15:28] [PACMAN] upgraded jack (0.124.1-1 -> 0.124.1-3)
[2014-08-31 15:28] [PACMAN] upgraded gst-plugins-good (1.4.0-1 -> 1.4.1-1)
[2014-08-31 15:28] [PACMAN] upgraded gtksourceview3 (3.12.2-1 -> 3.12.3-1)
[2014-08-31 15:28] [PACMAN] upgraded imagemagick (6.8.9.6-1 -> 6.8.9.7-1)
[2014-08-31 15:28] [PACMAN] upgraded libnl (3.2.24-1 -> 3.2.25-1)
[2014-08-31 15:28] [PACMAN] upgraded libpcap (1.5.3-1 -> 1.6.1-1)
[2014-08-31 15:28] [PACMAN] upgraded libtracker-sparql (1.0.2-1 -> 1.0.3-1)
[2014-08-31 15:28] [PACMAN] upgraded libwacom (0.9-1 -> 0.10-1)
[2014-08-31 15:28] [PACMAN] upgraded libxkbcommon (0.4.2-1 -> 0.4.3-1)
[2014-08-31 15:28] [PACMAN] installed thin-provisioning-tools (0.3.2-1)
[2014-08-31 15:28] [PACMAN] upgraded lvm2 (2.02.109-1 -> 2.02.109-2)
[2014-08-31 15:28] [PACMAN] upgraded man-pages (3.70-1 -> 3.71-1)
[2014-08-31 15:28] [PACMAN] upgraded ntp (4.2.7.p446-2 -> 4.2.7.p465-1)
[2014-08-31 15:28] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2014-08-31 15:28] [PACMAN] upgraded pacman-mirrorlist (20140706-1 -> 20140823-1)
[2014-08-31 15:28] [PACMAN] upgraded poppler-glib (0.26.3-1 -> 0.26.4-1)
[2014-08-31 15:28] [PACMAN] upgraded spice-gtk3 (0.24-3 -> 0.24-4)
[2014-08-31 15:28] [PACMAN] upgraded systemd-sysvcompat (215-4 -> 216-1)
[2014-08-31 15:28] [PACMAN] upgraded tcl (8.6.1-1 -> 8.6.2-1)
[2014-08-31 15:28] [PACMAN] upgraded telepathy-farstream (0.6.1-1 -> 0.6.2-1)
[2014-08-31 15:28] [PACMAN] upgraded tracker (1.0.2-1 -> 1.0.3-1)
[2014-08-31 15:28] [PACMAN] upgraded tzdata (2014e-1 -> 2014f-1)
[2014-08-31 15:28] [PACMAN] upgraded webkitgtk (2.4.4-1 -> 2.4.5-1)
[2014-08-31 15:28] [PACMAN] upgraded webkitgtk2 (2.4.4-1 -> 2.4.5-1)
would any of these packages cause this? Thanks.
Last edited by djmwj1 (2014-08-31 23:15:33)

Please edit your post to use BBCode Code tags around program output. That reference link is also below every post box on the forums. Thanks.

Oracle 11g XE listener does not start automatically during boot

Hi,
This happened to me recently I just wanted to share it with you.
For development I was running Standard Edition, at some point I decided to run also XE on the same server for another reasons. Everything was working fine, except that after restart of the server, the XE listener is not starting automatically. Debugging the startup script I found that this happens because of a bug in the code, which assumes that XE listener is running if it finds the word LISTENER within the processes list. I didn't found any obligation in the docs for running XE without any other databases on the same host.
In file /etc/init.d/oracle-xe, at line 556 the code is failing:
1     + status='oracle 2889 1 0 May13 ? 00:00:05 /oracle/ora112se/bin/tnslsnr LISTENER -inherit'
2     + '[' 'oracle 2889 1 0 May13 ? 00:00:05 /oracle/ora112se/bin/tnslsnr LISTENER -inherit' == '' ']'
As you can see I have another listener(the one for SE) running and because of the XE startup script found the keyword LISTENER it’s supposing that the XE LISTENER is already running.
To fix this simply change line 556 from:
1     status=`ps -ef | grep tns | grep oracle`
To:
1     status=`ps -ef | grep tns | grep oracle | grep xe`
Now XE listener is started automatically during boot.
Sve
Blog: http://sve.to
Twitter: sgyurov

I though the same thing, but XE LISTENER is running on localhost and port 1522. On the other hand XE have local_listener explicitly set to the very same connection descriptor. Even XE installation was second on this server.
I've could change that yes, but the startup script doesn't seemed to have this mind.
Regards,
Sve

CRS should not Starts at SYSTEM Boot

Similar Messages

Maybe you are looking for