CRS with out RAC

Hello,
We are using CRS in our company to manage automatic fail over of single instance databases as suggested by one of our consulting companies.
Since our applications can not benefit from RAC we decided we will use single instance 10G database running on RH Linux controlled by Oracle CRS.
We would like to know if this kind of setup is commonly used or not.
Please let me know your comments/advise/suggestions.
Thanks,
Murali

Hi,
If you are going to use failover then single instance failover will not work, right?
If you are planning to use single instance 10g db then why you want it to be controlled by CRS? If you are using CRS to start up automatically that anyway will be done by init.cssd process if you are using ASM in single instance environment.
So please tell what are your main goals to use CRS in single instance environment?
You can mail me at [email protected]
Thanks,
Keyur

Similar Messages

Oracle11g CRS with 10g rac db

Hi
can I use oracle11g CRS along with 11g/10g RAC databases together? Are they compatible.
Thanks
SS

Absolutely. As far as you have the CRS at the highest version, you can have Oracle RAC databases with different versions (lower than CRS Version).
HTH
Thanks
Chandra

Suggestion for installing 11gr2 crs with existing 10g crs...

Hi, I need suggestions on installing 1120 rac on suse 11 where already 10g rac with asm is running. I need to upgrade the 10g crs and asm while installing 11g crs. Pls share your experience on these
1- what are the challenges to run 10g database on 11gr2 crs? is this suggested?
2- challenges to upgrade asm and crs to 11gr2.
3- can we use 2 asm instance in 11g grid infra to manage 10g and 11g db separately.
4-what could be back strategy for this kind of setup? RMAN?
5-how many extra ip i need to install 11g crs with existing 10g crs . we plan to use 3 ip for scan.
Also if possible please share any doc for this kind upgrade
Thanks,
Abhai

1.) Yes this is o.k. Just see this MoS Note:
Pre 11.2 Database Issues in 11gR2 Grid Infrastructure Environment (Doc ID 948456.1)
2.) Well first only clusterware is upgraded. You will be asked if you want to upgrad ASM, but this is not mandatory at first.
You can use ASMCA later to switch ASM from 10.2 to 11.2 (this does not have to be done during upgrade).
3.) No you can only have 1 ASM running. So it is either 11.2 or 10.2 ASM. (However I suggest 11.2).
However you can/should have multiple diskgroups. One data and fra for the 11.2 databases where you set the rdbms.compatibility to 11.2 to use the new features, and one data an fra diskgroup for the 10.2 databases.
4.) As long as the compatibility setting of a diskgroup isn't changed, you can always switch ASM back to use 10.2 executables. (Just do a srvctl remove asm and add ASM).
Search this forum - there has been another thread about this.
Regarding fallback of clusterware => See installation guide.
5.) Mandatory are just 3 additional IPs for the SCAN.
Upgrade documentation see the installation guide of 11.2 GI.
Upgrade for ASM see Storage Admin Guide.
Upgrade to move OCR and Vote to ASM see Clusterware Admin Guide.
Upgrade to database see Database Upgrade Guide
Additionally look in MoS for the Upgrade Companion.
Sebastian

Problem with Oracle RAC with DRCP and persistent connections

Hello,
I am having a problem that has me stumped. I cannot get SCAN, and DRCP to work together nicely.
Right now, I can connect through my scan hostname fine without connection pooling, once I enable it I start having connection time outs. I found if I specified outbound_connection_timeout in sqlnet.ora that it times the connection out to the time I set in there. If I don't set this option I get a "ORA-12170: TNS:Connect timeout occurred".
The odd thing is I can leave connection pooling on and connect to one of my rac instances individually and it doesn't experience this problem. The only time it pops up is if I combine multiple rac instances (Through the use of SCAN or tnsnames.ora) and I enable connection pooling.
I don't know which direction to go to even diagnose this, so any and all help is appreciated.
Thank you.
Edited by: Rarp on Oct 1, 2011 10:47 PM

Hi,
You need to detail the problem. Enable TRACE SQL*NET on the server and client using note below.
How to Enable Oracle SQLNet Client , Server , Listener , Kerberos and External procedure Tracing from Net Manager [ID 395525.1]
Also you can try check this note:
11g: ORA-12170 With Combination RAC, DRCP and a Firewall [ID 953277.1]
Hope this helps,
Levi Pereira

How can i get all values from jtable with out selecting?

i have one input table and two output tables (name it as output1, output2). Selected rows from input table are displayed in output1 table. The data in output1 table is temporary(means the dat wont store in database just for display purpose).
Actually what i want is how can i get all values from output1 table to output2 table with out selecting the data in output1 table?
thanks in advance.
raja

You could set the table's data model to be the same:
output2.setModel( output1.getModel() );

How do I delete an old iCloud account with out knowing the password in order to make a new one

i recently sent my phone to my aunt and she reset the phone but my own iCloud is still on the phone how can she change it with out me giving her my password

That is Activation Lock. The only way around it is to log in with your credentials. Go to Settings/iCloud. Turn off Find my iPhone, and then uncheck iCloud. At some point you will have to put in your Apple id credentials (the one you use for app purchases). Then go to Settings/General/Reset and click on Reset All Settings. I would suggest you select Erase All Contents and Settings. That will set the phone back to factory defaults. She can then set the phone up as hers and download the apps she wants with her own Apple id.
Have a nice day.

Put old I life on new computer now I photo dosn't work it says cant open because it may be damaged or incomplete so all my pictures can not be accesed how do I get back to I photo or take what I installed off with out losing all my pictures?

I got a new Mac and was trying to burn from I movie to get it to a disk but new I mac dose not have I DVD . So I had my old I Life 11 disc with I DVD on it and I installed it, when I did this it did something to my I photo I can not open it at all it has a message that reads ,you can't open the application IPhoto because it may be damaged or incomplete . Now I can not get or see any of my photos how do I reverse what I did? can I take that I Life back out and how? with out losing all my pictures? and how do you burn to DVDs now without IDVD?

Diane,
Your photos are in the iPhoto Library. Almost certainly that is intact, so don't worry.
Go to your Home folder and open the folder called Pictures. What you want is in there, iPhoto Library. Don't do anything there, this is just to reassure yourself.
So it is a matter of getting the iPhoto app to work. Apps are in the Applications folder. Find it and trash it.
Next download iPhoto:
https://itunes.apple.com/us/app/iphoto/id408981381?mt=12

How do I install mavericks on a macbook with out the app store?

Okay, so this has been very annoying lately. So, long story short, I had to erase my HDD on my Macbook Pro which erased my operating system, and I do not have an OS X install disk. Is there a way to get OS X Mavericks with out having to go to the app store? I'm running OS X 10.5.8 Darwin on a 2007 iMac. So, I do not have access to the App Store. I am only 16 and I don't have a credit card to spend the 20 dollars on upgrading the OS to 10.6.0 Snow Leopard. Is this possible to get Mavericks so I can put it on a USB and install it, or no? The Macbook Pro is just a regular Mid 2012 13 inch with 4gb RAM, an Intel 2.5 i5 Processor, and a 500gb hard drive. Please help, I do not want to have this amazing notebook hanging around that I can not use. Thanks.

If this is for a 2012 MBP, the you can do this:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Select with out into in plsql

hi all
i want to write a select statment in a procedure with out into statement ..
is it possilbe if yes how can i do this.
if its not possible then if we have to Return a number of rows from procedure then how can i do this..
thanks in advance

User1728 wrote:
actual i want to return a datatable type data from procedureWhat does "datatable type" mean? "Datatable" is not a type in PL/SQL, so I assume that it has some meaning in your client programming language. What Oracle data type are you trying to return?
My guess would be that you are trying to return a REF CURSOR so that you want something like
SQL> create procedure return_rc( p_rc OUT sys_refcursor )
2 as
3 begin
4    open p_rc for select * from emp;
5 end;
6 /
Procedure created.
SQL> variable rc ref cursor;
Usage: VAR[IABLE] [ <variable> [ NUMBER | CHAR | CHAR (n [CHAR|BYTE]) |
                    VARCHAR2 (n [CHAR|BYTE]) | NCHAR | NCHAR (n) |
                    NVARCHAR2 (n) | CLOB | NCLOB | REFCURSOR |
                    BINARY_FLOAT | BINARY_DOUBLE ] ]
SQL> variable rc refcursor;
SQL> exec return_rc( :rc );
PL/SQL procedure successfully completed.
SQL> print rc
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM
    DEPTNO
      7369 SMITH      CLERK           7902 17-DEC-80        800
        20
      7499 ALLEN      SALESMAN        7698 20-FEB-81       1600        300
        30
      7521 WARD       SALESMAN        7698 22-FEB-81       1250        500
        30
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM
    DEPTNO
      7566 JONES      MANAGER         7839 02-APR-81       2975
        20
      7654 MARTIN     SALESMAN        7698 28-SEP-81       1250       1400
        30
<<more data snipped>>Justin

How do I reset my apple id security question with out a rescue email

How do I reset my apple id security question with out a rescue email?

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(101013)

How do I view ipod music files with out using I tunes?

I trying to view my Ipod music files without using itunes. But when I conect my Ipod to my pc I can only view contacts, notes, and caladar through the driver.
How do I view ipod music files with out using I tunes?

they should be under ur my music folder if u have windows

HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

hi
could you tell us what the other app is please

I just got an iphone and I already have an itunes account for my ipod, but I need to sync my phone and I do not want all my music and apps on it, can I change setting on my pc with out hooking up my phone

I just got an iphone 4s and I need to sync it to my itunes on my pc, but I do not want all the music and apps to be synced to my phone, can I change the settings in itunes with out hooking up my phone?

Open itunes, connect iphone,select what you want, sync

Adding data file with out using brtools /sapdba

Hi all,
How to add data file to table spaces with out using brtools /sapdba.Please let meknow.
Satya.

why would you do that? whats your requirement?
You can use sql commands (I prefer doing it via brtools),
example
alter tablespace <name of the tablespace> add datafile '<path of the datafile>' size <size in Mb>M autoextend <on/off> next <size> maxsize <size>;
regards
Juan

Action with out validation still showing error messages

Hello, I have a save action on a PopUp thats has the "with out validation" checked but still the error messages are shown... the problem is that y want to validate the fields by myself, not let the framework do it.
The other question I had is, is there a way to show the validation messages from the framework into the popup? because there are showing in the main window.
Thanks.

the problem is the acceptable range is wrong or probably wrong. this is resulting in your download speed being lower than the acceptable range and therefore shown in red
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

CRS with out RAC

Similar Messages

Maybe you are looking for