Crstal Report Server does not working on installation of Crystal Design

Hi,
I had installed Crystal Report Server 2008 on a machine, I was able to login and open the CMC console as well but on installation of Crystal Desing the CMC and inforview are not opening. its displaying some dll file is missing.
Kindly inform whether Server does not work after installation of Design on the same machine.
Thanks & Regards
PNN Murthy

Questions related to ASP.NET should be posted in the ASP.NET forums (http://forums.asp.net ).

Similar Messages

I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

Well the error message is in Swedish but says: The installation program database is damaged. Please contact the Adobe support (which is a hard thing to do!!). I use Windows 7 Home Premium with service pack 1.
Från: Mylenium
Skickat: den 29 december 2014 16:48
Till: Tony Bohman
Ämne: I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
created by Mylenium <https://forums.adobe.com/people/Mylenium> in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/7050595#7050595>

Server does not work in yosemite

Help! My OS X Server does not work after upgrade to Yosemite! Disaster!!!

After the disappointment that I cant manage the servers running the previous versions of OSX server from my upgraded desktop. I upgraded my office server to 10.10 Yosemite with OSX Server 4.0 I am still not able to connect.
I can remote desktop into the server without a problem (both are on the same LAN with the server on .local). But the Server app is not able to connect.
Actions taken so far:
Update software on desktop to 10.10 and Server 4.0
Update software on server to 10.10 and Server 4.0
Verified connection by pinging IP and .local
Verified to connect to the drive and screen sharing via local network
Rebooted router + switch
Rebooted desktop + server
If you manage OSX servers for clients, keep a system on 10.9 around so you can still keep your business running.
Upgrading the server needs to be done on site with display, keyboard and mouse connected.
Apple please fix a.s.a.p.

OSX server - Comment on Wiki (Mountain Lion Server) does not work

OSX server - Comment on Wiki (Mountain Lion Server) does not work - it always give an error "Comment could not be saved, please try again" eitheir upgrade from Lion Server or fresh install.

sorry, I had been allowed anyone to comment, and use wiki owner user also.

MS office report function does not work after building the appication

I use the MS office report function with a custom excel template my application.
It works properly in de developstate, but after building the application it does not work .
I use office 2000 and Windows XP

jmq wrote:
I use the MS office report function with a custom excel template my application.
It works properly in de developstate, but after building the application it does not work .
What error message if any did you get? It could be a couple things:
1. Did you include the Report Toolkit's dynamic vis in the app's build process?
Ref: Error 7 when Running an .EXE Using VIs from Report Generation Toolkit for MS Office
2. How are you giving the path to you custom template, as a relative or an absolute path? The path will be different for the .exe. You have to strip twice.
Ref: Why Can't My Executable Load My Included File When I Use Relative Path Encoding?
=====================================================
Fading out. " ... J. Arthur Rank on gong."

Report help does not work

We have generated a headstart online helpfile belhelp.htm
All works fine when using online help with forms: the help text uses help context id and bookmarks in het htm file.
Altough help text for all reports is generated in belhelp.htm, following errors and restrictions occur:
1. URL = http:10.1.10.0:7778/hsd65-help//hsd65-help/belhelp.htm is wrong. It should be http:10.1.10.0:7778/hsd65-help/belhelp.htm. How can I resolve this issue?
2. report help does not use bookmarks. Although help context id's are generated in the module defined in design editor, the button 'report help' in the report launch form does not use the bookmark. When I add a bookmark manually it works, eg http:10.1.10.0:7778/hsd65-help/belhelp.htm#BM919000000

This is a known bug that was fixed in Headstart patch 6.5.2.1, available through the supplement option. There are also a small number of other bugs related to reports that are fixed in patch 6.5.2.2, also available through the supplement option.
If you do not already have the supplement option, you can purchase it through your Oracle Consulting representative or through the Oracle store.
Regards,
Lauri

The site reporter tool does not work

There is an item in Firefox Help where you can report a Web site that does not work. Originally, a report database was available on line and you could review existing submissions. The database access site was officially [http://blog.mozilla.com/website-archive/2010/12/08/mozilla-reporter/ retired] and the data gathered were expurgated and dumped for everybody to download. It is 1.3 GB uncompressed; install with { gzcat | mysql mozrep; } to avoid doubling the space.
The [https://support.mozilla.com/en-US/kb/Menu%20Reference#w_report-broken-web-sitead site reporter tool] does not seem to work any more. It just submits the report forever. It seems that Mozilla has broken functionality in a supported browser, disregarding all users. The original reporter site redirects to a new feedback site. The problem with that site is that you have to install version 4 beta to use it, which is not nice at all. To add exploitation to disrespect, Mozilla tries to turn all customers into beta testers.

Hi there
Sorry, but you need to give us more information. For starters, you *ARE* using Adobe Captivate, right? And what exactly are you trying to do where you are seeing the eyedropper isn't working? Can you post a screen capture or a small video recording of it? You can use Jing http://www.jingproject.com or maybe Screenr http://www.screenr.com.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Iphone4 - Two Gmail Accounts - Outgoing server does not work anymore

I started using my private Gmail account on my Iphone and everything worked fine (having found help in Youtube videos about how to set up Ingoing/Outgoing server).
Now I added my Gmail account from work (ends on .nl instead of .com - Dont know if that matters). I can now access both inboxes but I cannot send emails from BOTH accounts. I then deleted the new account but still cannot send emails from my first account anymore.
I found that under "settings->Mail,Contacts,Calendars->Gmail Account->AccountInfo->OutgoingMailserver SMTP" I now have a primary server which seems to connect to my first account and several "other SMTP server" which contain either details of the first account or the second account (which I actually deleted aleady).
Should I delete those additional servers? How can I do this? Does anyone have experience with this kind of issue?
Thanks a lot in advance.

I did put all the informations and still it does not work telling that these informations are not right!!!!
HELP please

Internet does not work after Installation of Oracle10g on SuSE 10 Enterpris

Hi,
I installed SUSE 10 then configured the network services using network manager as it did not work by just putting the DNS servers and router address. The internet was working fine till I installed Oracle 10g. It somehow modified my DNS address from 203.97.33.1 to 203.97.33.14. The web interface for Oracle works fine.
If I run the Network manager again, my internet starts working but the Oracle web interface does not work.
I do not understand what's happening. Please help.
Thanks.

I have never liked using Network Manager with Oracle. If you use traditional ifup, you can use SCPM and have different profiles. The first 2 things I do during an install of Suse Linux that will have Oracle 10g is disable Network Manager and disable IPv6. Go to /etc/hosts and remove all entries that have the IPv6 addresses. The 10g OC4J applications from database and application servers have problems with IPv6 addressing. Make note of your current DNS addresses and your route before reconfiguring to ifup. Use route -n to get the router address if you do not already know it. It is the gateway with values. It is also a good idea to configure your wired ethernet device to start on boot up, then you can ping your hostname whether or not your cable becomes disconnected, i.e. still access dbconsole with the router down.

Does any one know why the iCloud email server does not work?

I keep trying to send mail but it keeps telling me the server is not working and to create another. Help!?!

Either it ended up in a spam filter or it isn't being sent to that address. If you can't find it, use the link in the 'Additional Information' section of that article to contact the iTunes Store staff.
(88597)

Why sudenly my mail stop fonctionning on my ipad,telling me that my server does not work anymore and I have to redefine my account information?

My Gmail stop working yesterday.Cannot sent or receive message telling me my account informations are not correct???

I did put all the informations and still it does not work telling that these informations are not right!!!!
HELP please

J2EE server does not start during installation

Hi,
I am installing WebAS JAVA 640 (NW04 SR1) on a Windows 2003/MSSQL server. I am using JAVA SDK 1.4.2_9. The installation stops at step 24/25 whereby the installer waits for the J2EE engine to start. After making 3 attempts to start the J2EE server, the installation process just hangs and I have to Cancel the installation.
BTW, I am specifying a heap size of 1024 MB and using the "Database Only" option as UME data store during installation.
Having checked the trace and log files, it seems the UME service fails to start, throws an exception and the message "the start of a core service failed, Web AS will not start".
According to the information available <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/20/361941edd5ef23e10000000a155106/content.htm">here</a>, I have checked the settings and it seems that option 2, <b>"User or group data is missing"</b> is causing the problem since database content of UME is missing. I have tried selecting entries from table UME_STRINGS but this table is empty.
Now, the same link says that I should login to UME web application as SAP* but the problem is that without the J2EE engine starting up, I cannot login and create missing users/groups.
Any ideas???
Regards
Shehryar

Thanks to all who replied. I have actually tried all options suggested like waiting for retries until the box appears, trying to manually start the server, and reducing heap size. None worked for me. For your information, I have a 2.4 GHz machine with 4GB RAM so I think heap size should not be an issue. I checked SAP Note regarding heap size issues in Win 2003 but that does not seem to apply in my case since my system does not behave abnormally with JVM settings.
Thanks again and I'll give it another shot.
Regards
Shehryar

File download from one server does not work (other browsers work)

After uprading to Win7 and FF 7.0.1 the file download from our intranet server stopped working. IE 9 and Chrome 14 does not have any problems. When I try to open for exmple this URL:
https://wwwedu.oulu.fi/intra/?act=58&rnum=26241
I got only an error page:
Corrupted Content Error
The page you are trying to view cannot be shown because an error in the data transmission was detected.
The page you are trying to view cannot be shown because an error in the data transmission was detected.
Please contact the web site owners to inform them of this problem.
I have tested this with two separate computers and got some similar reports from students.
If there is is problem in the headers etc. of the server, I would be very pleased to know that, too!
Thank you very much
Eetu Pikkarainen

Thank you, the discussion in [https://bugzilla.mozilla.org/show_bug.cgi?id=681140 bug 681140] was informative.
(By redbot.org I found out that there was two Content-Disposition headers. They were identical, but other one had one space character more. When they were corrected to identical then douwnload work. Now I still have to find out why there are two...)

Report server is not working in version 10.1.2....

Hi all
From long time i am trying to run the report server in Forms [32 Bit] Version 10.1.2.0.2 (Production) without Network( IP) configuration.But i did not do it.But
its working fine with IP address.Is it possible to run report server without IP addresss? Help me out thanks in advance.
sarah

In rwnetwork.conf in $oh/reports/
- remove or commented the following
<multicast channel="228.5.6.7" port="14021" timeout="1000" retry="3"/>
- And then uncommented
<namingService name="Cos" host="%NAMING_HOST%" port="%NAMING_PORT%"/>
- replace the
%NAMING_HOST% with your computer name or specify an IP address
%NAMING_PORT% with 14021
execute in the command line : namingservice.bat 14021
(To shutdown the namingservice, use : namingservice.bat 14021 shutdown)
try restarting the reports server and test ..
hope it helps

DHCP Server does not work after Exporting and Importing Using Netsh Command

Hello Friends :
I had two dhcp servers in windows server 2003 server , I have upgraded one of them to windows server 2008 32 bit and again i installed a windows server 2008 R2 as an additional Domain Controller , the last scenario was like this :
srv-1 : windows server 2003 + DHCP = working with no problem
srv-2 : windows server 2003 + DC + DHCP = Worked without problem
srv-3 : windows server 2008 R2 + DC = worked without any problems
I exported the DHCP server configuration on the srv-2 using netsh dhcp server export and Imported them to srv-3 using the
netsh dhcp server import command , the command completed successfully and i can see all of the scopes without any problems and errors , i have authorized the new server without any problem , all scopes are activated without any problem so i
disabled the srv-2 DHCP service and unauthorized it from active directory , the problem is that the new server semms that does not lease any address to clients !!!
1- I have authorized it
2- I used Rogue Checker tool in client computers they see authorized server without any problems
3- The same tool in workgroup only shows srv-1 as the DHCP server and does not see other DHCP servers
4- Bindings are OK and DHCP servers only have one NIC installed on them
What can i do to make sure my srv-3 DHCP server will work on the network ?
thanks ...
MIMO

Are the clients on another network so you need to configure a DHCP relay agent?
If you load up perfmon on the dhcp server and remove all counters and then add DHCP counters. Do you see any dhcprequests when you reboot your dhcp clients? This will determine if your server actually receives any dhcp requests.
Have you check event viewer for any warnings or errors?
And the classic one restarted the dhcp server service (or reboot)?
Regards Per-Torben Sørensen http://pertorben.wordpress.com/

Crstal Report Server does not working on installation of Crystal Design

Similar Messages

Maybe you are looking for