Crsytal Report Connection to SAP :Error invalid Request
Dear All
We have SAP EHP7.
We have Crystal Report 2013 installed.
We tried to connect to SAP tables through new connection, it gives me the following Error.
Subsequently we tried to import the transport requests (as suggested). But it gives invaid Request error.
Kindly, help me where to find the correct transport requests.
Regards,
Venkat
are you connecting through odbc? if so check to see if you are using windows authentifiction or sql.
make sure the user you are trying to pass has read access to the database
Similar Messages
-
Report Server WMI Provider Error: Invalid namespace
Domain Server, Sql2012 server and SP2013 Server (3 vm servers)
the sql server reporting services service application and applications Proxy are installed and started (SP2013 Sever)
the sql server PowerPivot system Service and SQL server Reporting Services Service are Started (in Services on Server)
in sql server 2012 sp1 reporting service configured (web service URL and Report Manager URL are configured and tested, the database report server mode is native) (SQl 2012 Server)
under general Application Settings .. trying to setup the "Reporting Service Integration" give us the above error message (Report Server WMI Provider Error: Invalid namespace)
I was looking for all blogs and TechNet material but without success.Follow these steps:
1) Uninstall SSRS from the Database Engine server (MSSQLSERVER instance).
2) Install SSRS on the SharePoint server using the "Reporting Services - SharePoint" install option during SQL Feature selection, no other services are required (e.g. you do not need to install Database Engine services).
3) You should then see SSRS as a Service Instance in Central Admin -> Manage Services on Server, at which point you can also create an SSRS Service Application.
While this guide (http://msdn.microsoft.com/en-us/library/jj219068.aspx#bkmk_install_SSRS) walks you through it, this is for a single server install where the Database Engine is also installed on SharePoint, not something you want to do.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Getting No rights error in Crystal Reports connection with SAP ECC 6
I am ABAP/BI developer and would like to work in Crystal Reports 2011. Currently, We have SAP ECC 6 and BI 7 set up. I have installed trial version of Crystal Reports 2011.
I am getting error while trying to create blank report in Crystal Reports:
Create New Connection -> SAP Tables.. -> entered SAP Development server user id and password -> following error message :
LOGON failed
Details : You do not have necessary rights to design reports against the SAP system. Please check with your system administrator.
My user id has all rights in development server. So, is any special rights require? OR do we have to install any patch for Crystal Reports at SAP level?
Please guide me.Hi,
To be able to report off an SAP data source in Crystal Reports, request the SAP Administrator to set the appropriate authorizations for the user.
For a list of authorizations that are necessary for each type of SAP connection, consult the document:
BusinessObjects XI Integration for SAP Installation Guide
In the "Authorizations" chapter, there is a description of each authorizations needed for each type of connection and actions.
( The document is attached to this SAP Knowledge Base Article in the attachment section )
In addition to the authorizations specified in the SAP Integration Kit Installation Guide, the following authorizations are required:
For Authorization object: S_RFC with Field name: RFC_Name. According to the installation guide the values should be: SYST, /CRYSTAL/OPENSQL
Additionally you will need the value: SUSR as well.
For Authorization object: ZSEGREPORT with field name: ACTVT. According to the installation guide the value is: 02 (Change)
Additionally you will need the value: 01 (Create or generate) as well.
Thank you. -
SAP Crystal Reports connection to SAP R/3
Hello Everybody,
I install SAP BO Enterprise Edition XI 3.1
SBOP Rich Client Tools XI 3.1
SBOP Integration Tool Kit XI 3.1
Java Connector
Crystal Reports 2011
I configured all the integration and it works fine, i can log on the Infoview with SAP ID.
I work with SAP R/3 4.6C
The problem is when i connect to the R/3, Crystal show me the system that i have in the saplogon.ini, and then i used a user that i have to test, whenn i tried to logon, an error occurs...
Logon failed.
Details: You do not have the necessary rights to design reports against the SAP system. Please check with your system administrator.
And when i used the user sap*
Logon failed.
Details: Name or password is incorrect. Please re-enter.
So... what do i need to pass that rights to my user??? or do i need to do some kind of customizing in the SAP R/3 system???
Thanks!
Edited by: Erick Fernando Nicolas Fernandez on Aug 10, 2011 3:55 AMThere is a specific set of authorizations that you need to provide to your SAP user to be able to create CR reports against SAP data source. Check in the "SAP BusinessObjects Enterprise Integration for SAP Solutions Installation and Administration Guide" chapter 13 called "Authorization".
You can download this guide in the following URL: ht[http://service.sap.com/sapidb/011000358700000559912010E/xi31_sp3_bip_sap_inst_en.pdf|http://service.sap.com/sapidb/011000358700000559912010E/xi31_sp3_bip_sap_inst_en.pdf]
More product guides on ht[http://help.sap.com/businessobject/product_guides/|http://help.sap.com/businessobject/product_guides/]
Hopefully it helps.
Filipe Hartmann -
Crystal report- Connect from SAP gateway to RFC server failed
Hi All,
I am trying to connect to a SAP R3 system from crystal reports but it gives me below error.
Please note : Transports have been imported and also the roles CRYSTAL_ENTITLEMENT and CRYSTAL_DESIGNER. My user is a member of these roles which were release along with Best practice reports v1.31
Error :
Logon failed.
Details: CMALLC : rc= 27 > Connect from SAP gateway to RFC server failed
Connect_pm GWHOST=10.10.4.63, gwserv=SAPGW30, SYSNR= 30
Location SAP-gateway on host ply.log.com/sapgw30
Error timeout during allocate
TIME ....
Release 700
Component SAP Gateway
Version 2
RC 242
Module gwr3cpic.c
LINE 1996
Detail no connect of TP sapdb30 from host 10.10.4.63 after 20 sec
Can you please help us solving this error.
Thanks
ChetanHi Stratos,
The SAP Version is ECC 6.0.
The below transports have been imported.
u2022 Open SQL Connectivity transport (K900574.r21 and R900574.r21)
u2022 Info Set Connectivity transport (K900575.r21 and R900575.r21)
u2022 Row-level Security Definition transport (K900576.r21 and R900576.r21)
u2022 Cluster Definition transport (K900585.r21 and R900585.r21)
u2022 Authentication Helpers transport (K900578.r21 and R900578.r21)
Thanks & Regards,
Chetan -
URL Reporting connecting to SAP R/3
Hello,
We have Crystal Reports that connect to ABAP Function Modules in our R/3 4.7 system as the data source. To minimize the number of user prompts, we use URL Reporting to pass all the required parameters for the report. The one thing we have not been able to do is specify data connection information in the URL. We currently get around this by setting the data connection information (SAP server, system #, client #, etc.) in the Database Configuration for the report in the CMC. The downside to this is that the report is now limited to running against a single SAP client.
Is there a way to specify the SAP connection information (server, system #, client #, etc) in the URL Reporting string? I know it can be done for SQL data sources through the USER- and PASSWORD- commands on the URL, but is there a similar way to specify SAP connection information?
Our reporting environment is BOBJ Enteprise XI 3.1, reports are developed in Crystal Reports 2008.
Thanks,
Byron ClairouxHi,
that is not possible. the connection is part of the report.
Ingo -
Disc erase failed with error invalid request
HI,
I'm trying to get a new 2.5tb external wd hard drive to work with both my mac and my old pc - so i can backup my old data from the pc.
i have tried using disc utility, and erasing the disk and reformating to ms-dos (fat) format and recieve the following error message:
Disk erase failed with the following request: invalid request
i have also tried partitioning the hard drive, and recieve the same error message.
Any ideas on how to re-format this device?
Thanks!Had to reply just to say this.
Thank you Webdva
- OSX Yosemite -
Problem connecting on SAP Error OADM -2025
Hi,
i have a problem when i try to connect to Database Sap it give me an error message:"Trying to release mutex referred the caller is not the owner".
What does hit means?????
Everyone can help me???
Valentina
Edited by: Valentina Mioli on Jan 3, 2008 2:58 PMHello Valentina,
Did you use the example. Could you post (parts) of your code?
For example:
Dim oCompany As New SAPbobsCOM.Company
oCompany.Server = "(local)"
oCompany.LicenseServer = "localhost:30000"
oCompany.CompanyDB = "SBO_PE_RSA"
oCompany.UserName = "manager"
oCompany.Password = "manager"
oCompany.DbUserName = "sa"
oCompany.DbPassword = "sqlpass"
If oCompany.Connect 0 Then
MessageBox.Show("Error: " & oCompany.GetLastErrorDescription)
Else
MessageBox.Show("Connected")
oCompany.Disconnect()
Good Luck
Regards Teun -
Error "The request failed with HTTP status 401: Unauthorized"
Dear All,
While running ssrs report using reportviewer I am getting following error as "The request failed with HTTP status 401: Unauthorized". I have also added required entry in registry and rebooted the server. But same issue appears. So, please help
me to resolve this.
Thanks in advanceHi dsddsadsa,
According to your description, when trying to running report from the report viewer control, the error "The request failed with HTTP status 401: Unauthorized" is thrown out.
While running report viewer control without impersonation setting, by default it will use the process identity which is Network Service (the AppPool identity is Network Service). Depending on the identity of the AppPool the app is running under, the identity
might be rejected. In your scenario, you may haven’t enable ASP.NET impersonation, you will get this exception. Please set up the following impersonation in the Web.config file, so that ASP.NET will use the configured user name and password to access the report
server:
<configuration>
<system.web>
<identity impersonate="true"
userName="domain\user"
password="password" />
Reference:
Request failed with HTTP status 401: Unauthorized (ReportViewer
control)
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu -
Error While connecting to SAP R3 from crystal reports
Hi Experts,
I am trying to connect to a SAP R3 from crystal reports, it gives below mentioned error.
Logon failed.
Details: CMALLC: rc= 27 > Connect from SAP gateway to RFC server failed
Connect_PM GWHOST=10.11.12.13, GWSERV=SAPGW12, SYSNR= 12
Location SAP-gateway on host xyz/sapgw12
Error timeout during allocate
TIME Wed Nov 18..
Release 700
Component SAP Gateway
Version 2
RC 242
Module gwr3cpic.c
LINE 1872
Detail no connect of TP sapdb12 from host 10.11.12.13 after 20 sec
COUNTER 6
Please help me to solve this error.
Regards,
GaneshHi
please ask your network admins if there is a firewall between your CR Designer installation and your SAP R/3 system.
I assume that you have imported the necessary trsansports in your SAP R/3 system.
Which kind of driver do you use for the connection to SAP R/3?
Regards,
Stratos -
XL Reporter error Unable to Connect to SAP Business One DI API
Hi Experts,
Im getting this error on one of our clients' workstations.
They have SAPB1 2005A PL 31.
We've tried uninstalling and reinstalling the DIAPI and the whole client application as well. Same error.
It als gives an error after the initial error that says:
"Security Settings in Microsoft Excel prohibit XL Reporter from running."
Any suggestions?
Thanks!hi jairus,
To fix this XLR error 'unable to connect to SAP Business One DI API', do the following:
1. Go to control panel and uninstall SAP DI API
2. Run %temp%
3. Rename the folder SM_OBS_DLL
4. Go to the patch level package of the patch level you are using and install DI API. If you get a message that the installation already exists, ignore the message and proceed to install DI API.
XLR should work properly.
Best Regards,
David -
Error Starting XL Reporter - Unable to connect to SAP Business One DI API
Hi Experts,
I am getting the error message...
Unable to connect to SAP Business One DI API
[SAP Business One DI API]
Internal error (-8006) occurred [131-183]
...when trying to start XL Reporter on one client PC. Until today, it has been working OK.
What needs to be done?
Thanks
GreigHi Gordon,
I thought that might be the answer. Are there any set instructions for a 'clean' client uninstall?
Thanks
Greig -
Error: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
Hi Gurus,
i am hardly fighting with this error in Communication Channel Monitoring:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
This is my scenario.
I do a File to SOAP Scenario. in SXI_MONITOR everything is fine.
My CommChan is a SOAP Receiver
HTTP
SOAP 1.1
Central Adapter Engine
Target URL is https --> i check url for correctness
Configure User Authentication is checked and username and pw are given and are correct.
Configure Certificate Authentication is checked are working
Configure Proxy is checked and Host and port are povided.
SOAP Action is provided
In Tab Module
if have this Processing Sequence
1 localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean transform
2 sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean Local Enterprise Bean 1
and this Module configuration (and only this)
transform Transform.ContentType text/xml;charset=utf-8
(according to /people/sobhithalaxmi.kata/blog/2009/07/21/cost-free-edi-integration-using-message-transformation-bean)
As far as i understand that my http header should have Content-Type: text/xml;charset=utf-8 now. I don't understand why Communication Channel Monitoring shows an error according to content TEXT/HTML.
Can anyone help me with that?
Is it possible that Transform.ContentType does not work for SOAP Receiver Adapter?
is there any chance to view the HTTP-Header of the outgoing SOAP Request (with PI Transaction / Java Enironment) to convince myself that the HTTP Header is text/xml?
Thank you in advance and Best Regards
UdoHi Thanks for your fast replies.
The Provider of the Endpoint tells me that he needs text/xml as content-type. When I sent a message to the given Endpoint via SOAP UI I can see in the HTTP LOG of SOAP UI that the Endpoint is also sending text/xml back.
Below you find the Details log out of the CommChan Monitoring.
2011-04-29 11:37:45 Information The message status was set to TBDL.
2011-04-29 11:37:45 Information Retrying to deliver message to the application. Retry: 3
2011-04-29 11:37:45 Information The message was successfully retrieved from the receive queue.
2011-04-29 11:37:45 Information The message status was set to DLNG.
2011-04-29 11:37:45 Information Delivering to channel: getxxxxx_In <---- name of my SOAP Receiver CommChan
2011-04-29 11:37:45 Information Transform: using Transform.Class: $identity
2011-04-29 11:37:45 Information Transform: transforming the payload ...
2011-04-29 11:37:45 Information Transform: successfully transformed
2011-04-29 11:37:45 Information SOAP: request message entering the adapter with user J2EE_GUEST
2011-04-29 11:37:46 Error SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
2011-04-29 11:37:46 Information SOAP: sending a delivery error ack ...
2011-04-29 11:37:46 Information SOAP: sent a delivery error ack
2011-04-29 11:37:46 Error SOAP: error occured: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
2011-04-29 11:37:46 Error Adapter Framework caught exception: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
2011-04-29 11:37:46 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request.
2011-04-29 11:37:46 Error The message status was set to NDLV.
What i am missing is a hint on the Message Transform Bean and a on a successfull sending process.
What i also tried already:
i also activated the checkbox "Do not use SOAP Envelop" in CommChan Configuration. The Result you see below (the last log entry is on first line - so read from bottom to top)
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 400 Bad Request
error in response
call completed
request entering
Message processing started
As you can see there is a "call completed" and "error in response" log entry. This is missing in in the first Log. So i guess the error is still in the sending process.
Installing additional Software on the PI and use them to find out what the HTTP Request is is not possible as system access is very strict and limited :/ -
Frequent Error in Reports (Connection between OBIEE and Essbase)-Urgent
Hi All,
I'm developing OBIEE reports based on EssBase cubes.
Sometimes (for certain reports / prompts) I get following error messages
State: HY000. Code: 10058. NQODBC SQL_STATE: HY000 nQSError: 10058 A general error has occurred. Essbase Error: Invalid login id - request EssSetActive failed (HY000)
State: HY000. Code: 10058. NQODBC SQL_STATE: HY000 nQSError: 10058 A general error has occurred. Essbase Error: message on contacting or from application PNL_APP server: Thu Dec 25 14:25:53 2008Local////Error(1013080) Already Connected to Server -- The previous connected request still running, try again (HY000)
My connection pool configuration:
Call interface: Essbase
Maximum connections: 10
Shared logon: True (a single user / password used for all queries)
Use Session: True (also tried false - doesn't help)
Use multithreaded connections: True
Does anybody have an idea - what causes these problems and how can I prevent them?
Also i have a doubt whether this error is caused due to essbase subtitution variable which is used in my report.
With Regards
PradsCould you guys solve this error? I am facing similar issue while querying Essbase cube through OBIEE.
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. Essbase Error (HY000)
SQL Issued: SELECT Fact.HNW_TXN_NDS_QTY saw_0 FROM HNWBSO
I created an initialization variable using the essbase cube which works fine in the offline mode but throws error when the respository is offline. Error Msg is
[NQODBC] [SQL_STATE:HY000][nQSError:10058] A General error has occurred
[nQSError:43093] An error occurred while processing the EXECUTE PHYSICAL statement
Thank you!
Shashank -
Getting Logon Failed error connecting to SAP R/3 with Crystal
I have Crystal Reports 2008 and also the SAP Integration Kit installed on my desktop. I've imported the transports into my DEV and QAS systems and am trying to connect directly to R/3 from Crystal using the SAP Table, Cluster or Function choice.
I receive the error:
Logon failed. Details: You do not have the necessary rights to design reports against the SAP system. Please check with your system administrator.
I'm using a logon that has full rights within SAP. It recognizes my password because when I try a password that I know is wrong I get a different error message: Logon failed. Detail: Name or password is incorrect. I receive the same error in PRD even though I have not imported the transports into that client.
I have Crystal Server but am not trying to use that at the moment. Just Crystal Reports as a standalone product. If I've left something out please let me know.
Thank you,
Kevin ScheelerHi Kevin,
take a look at the Installation Guide for the SAP Integration Kit which includes a detailed list of authorizations per use case in the appendix
the documentation is available on help.sap.com
Ingo Hilgefort
Maybe you are looking for
-
Hi, in a production order operation 20 is sub-contrcating. to send the result material of operation 10 to sub-contractor, we need to prepare excise doc because of cin implemention. for that the mat suppose to be taken into stock. again operation 30 i
-
Quality inspection before goods are issued
Dear friends, We have got requirement that before Goods are issued all materials shall undergo Quality inspection and then materials are issued. How to map it in SAP. Please suggest Regards Canand
-
Mass generation of Derived Roles
Hello, SUPC helps me in Mass generation of Master Roles. But how do I generate Derived roles in a lot? Thanks.
-
When I go to share photos in iPhoto 11, The photos transfer to the email I'm sending but the photo information and location don't. The older version of iPhoto did it, why not this version? What am I missing in the process of sharing via email?, Tha
-
Upgrading PS 5.5 S&T Ed. to Web Premium 5.5 S&T Ed.
What are my upgrade pricing options if I buy PS now and decide to upgrade to Web Premium later? Thanks...