CRT Display stopped working with Mac Mini

After over a year, my 7-year old ViewSonic CRT display went dark while working on my 1-year old Mac Mini (PowerPC). I replaced the DVI-VGA adapter and it worked perfectly---for a week---and then did the same thing: the screen went dark and the power light went red on the monitor. Both times this happened I hooked up an older generic monitor to see if my ViewSonic had died, and it put up a message stating that "both signals" were missing.
Why was the adapter only a temporary fix? Do older CRTs have the habit of frying these adapters or is it something else?
Mini Mac   Mac OS X (10.4.5)  

The older monitors that did not come with vga plugs were sometimes computer specific Example. a compac monitor would not work with an ibm. You should get at least a monitor that has vga  plug. I had a gateway plugged into my mac mini. Some one will most likey say I'm wrong , but I did try the compac with an ibm. no screen. Older pc monitors with vga plug are pretty cheap right now,. Got mine from goodwill for $6.00

Similar Messages

  • Usb mike not working with mac mini

    Hi,
    I bought a samson CO1U usb connection mike to use with the mac mini as there is no mike connection. The device is recognised by the computer but apparently not by i-movies or Quicktime Pro 7 as when I bring up the audio screen nothing registers in the sound level and obviously nothing records - am I doing something wrong or missing something out or is this device just not compatible? Apple help were no help!
    Hope someone can be of assistance in this matter as I need to record a voiceover on to an animation video.
    cheers, shadwell

    Hi, thanks for your reply - did that but still no joy.
    In utilities / audio midi it says output ( and input ) not supported and in system preferences/sound the input level is registering nothing.I'm going to try the mike on a friend's laptop to see if it is a problem with the mike or the mini mac - or maybe I'm just making some simple mistake in setting it up in Quicktime.Do you know if any usb recording devices actually do work with the mini mac?
    thanks, shadwell

  • HD IOMEGA MINIMAX DE 1 T don't work with Mac Mini together

    Hello
    I have bought a Iomega Minimax Hard disk of 1T and after proof i have sawn that it haven't one very important function. This disk don't awake, sleep, turn on / turn off with the Mac Mini. You must always turn on or turn off after do whatever you want.
    But the mainly problem is that the MINIMAX 750 GB works perfectly. I have one and it's the best partnet to my MacMINI Medi Center. This works perfectly with Mac Mini in common.
    I am ver glad with the minimax 750 GB but I'm very disappointed with the last modern model of 1 T.
    I hope to help somebody with this.
    Bye

    Can you return it for something that works?

  • Cinema Display 24" won't work with Mac Mini 3.1

    I recently purchased a refurbished Apple LED Cinema Display 24" from a buddy.  I'm pairing it with my used Mac Mini 3.1 (2009?). The display port mini connections seem to match.  The USB is plugged in.  The only cable unused is the "macbook power" plug, from the display.  I know the display and CPU both work fine independently. Cinema display seems to power the USB and "Macbook power".  I just can't get any life out of the display.  These 2 devices should work together right?  Is there a sceret power-button that I don't know about?

    The video cards that ship with the current Pro have one Display Port and one mini DVI port.
    There is an adapter to connect a DVI monitor to a Display Port connection. There is no such thing as an adaptor that will let you connect a Display Port equipped monitor to a mini DVI port on the graphics card.
    Final Cut Pro uses dual monitors connected to the same graphics card. Using a twin graphics card setup causes problems with FX Plug FCP plugins, which can cause FCP to fail to launch.
    The solution is to find a Graphics card with dual Display Port connectors, (if one even exists) or replace it with a grahics card that uses dual DVI ports, such as the ATI 3870 HD. Of course, the latter means that you cannot connect two 24" Apple Cinema Displays.

  • Dual ADC Apple Studio Displays (clear acrylic) with Mac Mini

    I currently have the old school Apple Studio Display ADC monitor hooked up to my Mac Mini using the ADC to DVI adapter. I have a second Studio ADC Display and another ADC to DVI adapter to run Dual Displays. I just bought a SEE 2 XTREME DVI to USB which is used for adding multiple monitors. I have it all hooked up. Its just basic plug and play after installing the Mac driver. My second monitor power light just flashes and wont turn on...Any suggestions? I already made sure both monitors and both ADC to DVI adapters worked, and they do. Please Help!! Any info would be greatly appreciated.

    yea, I checked that out about the light flashes. I have tried both monitors seperately and they both work fine...just not with this DVI to USB dual monitor adapter. Also, when I had them hooked up individually, I made sure the resolution was set the same in the system preferences > displays.

  • Mini DP to HDMI does not work with Mac Mini 2014?

    Hi All,
    I just upgraded from a Mac Mini 2011 i5 to a Mac Mini 2014. My old Mini worked fine running 2 displays with an HDMI cable to one monitor and a Mini Displayport to HDMI from the Thunderbolt port to another monitor. I can't seem to get the new 2014 Mini to see the monitor from either the Thunderbolt ports. Is this no longer supported?
    Thanks
    Ray

    Hi there LaureynR,
    You should still be able to do this. I would recommend taking a look at the article below for troubleshooting steps.
    Apple computers: Troubleshooting issues with video on internal or external displays
    -Griff 

  • Mini DisplayPort to DVI-D adapter works with Mac Mini 2010?

    Hi,
    I would like to connect my Mac Mini (2010 edition) to both my Samsung PX2370 display and my LCD TV. Currently, I only have the Samsung display connected through the included HDMI-to-DVI adapter, but I'd like to use the HDMI output to directly connect my LCD TV, and connect the Samsung display by using a Mini DisplayPort-to-DVI adapter, like the one that is for sale at the Apple Online Store. Such adapter should work without trouble with any MAc computer that has a mini DisplayPort output, including the Mac Mini, right?
    Thanks in advance for your support.

    You're right, but I forgot to mention that the Samsung display is just an LCD monitor, so I don´t really need to get audio output for both connections
    Currently, I use an HDMI-to-DVI adapter to connect the Samsung monitor, but I'd like to use the HDMI output to connect my LCD TV instead (and probably a home theater system in the future), and use the Mini DisplayPort output for the monitor, so that I can have a dual-display setup.
    I asked this question, because I read the description for the Mini DisplayPort-to-DVI adapter in the Mexico Apple Store web page, and that description tells that only Macbooks support the adapter. In the US Apple Store page, it does tell that the adapter is supported by any Apple computer with a Mini DP connection, so I just wanted to confirm which description is true, to avoid confusions.
    Anyway, I appreciate that you took the time to respond... Regards!!

  • USB Ethernet Adapter Stopped Working On Mac Mini Server Running 10.6.6

    Is anybody out there successfully using the Apple USB Ethernet adapter on a Mac Mini Server running 10.6.6? They have stopped working for me.
    The boot disk in the 2009 Mac Mini Server in my classroom failed and after Apple replaced the disk and I reinstalled SLS and ran Software Update to bring the machine up to 10.6.6 the USB Ethernet adapter that was the interface to the outside world no longer recognized when a cable was plugged in. The cable was good and worked just fine if plugged into another machine or the built-in interface. At first I thought that the USB Interface had failed but after trying two new ones (graciously exchanged by Apple) and finding that none of them worked I'm coming to the conclusion that perhaps the warning on the package that the USB Ethernet only works with the MacBook Air finally became true.

    Douglas Urner wrote:
    Is anybody out there successfully using the Apple USB Ethernet adapter on a Mac Mini Server running 10.6.6? They have stopped working for me.
    The boot disk in the 2009 Mac Mini Server in my classroom failed and after Apple replaced the disk and I reinstalled SLS and ran Software Update to bring the machine up to 10.6.6 the USB Ethernet adapter that was the interface to the outside world no longer recognized when a cable was plugged in. The cable was good and worked just fine if plugged into another machine or the built-in interface. At first I thought that the USB Interface had failed but after trying two new ones (graciously exchanged by Apple) and finding that none of them worked I'm coming to the conclusion that perhaps the warning on the package that the USB Ethernet only works with the MacBook Air finally became true.
    Only the specific build of Mac OS X that comes with a MacBook Air includes the kernel extension to run the Apple USB Ethernet adapter, however there are no hardware issues preventing it being used on other Mac models if you have a suitable driver.
    Generic USB drivers can be downloaded for free from http://www.sustworks.com/site/newsusbethernet.html and this worked for me.

  • 24" LED Cinema Display not working with Mac Pro

    I have a Mac Pro (2 x 2.4 GHz Quad-Core, model identifier MacPro5,1) purchased in late 2010 and a 24" LED Cinema Display. The Mac Pro has three video ports--a full-sized DVI and two mini DVI. When I plug the Cinema Display into either of the mini DVI ports, I cannot get a picture, although the iSight camera works fine. If I plug another monitor into the full-sized DVI port the computer believes that is the only monitor. The Cinema Display works fine with my MacBook, so there is nothing physically wrong with it.
    Is it not possible to use this monitor with a Mac Pro without an adapter, even though the Mac Pro does have mini DVI ports?

    Atiya wrote:
    I have a Mac Pro (2 x 2.4 GHz Quad-Core, model identifier MacPro5,1) purchased in late 2010 and a 24" LED Cinema Display. The Mac Pro has three video ports--a full-sized DVI and two mini DVI. When I plug the Cinema Display into either of the mini DVI ports, I cannot get a picture, although the iSight camera works fine. If I plug another monitor into the full-sized DVI port the computer believes that is the only monitor. The Cinema Display works fine with my MacBook, so there is nothing physically wrong with it.
    Is it not possible to use this monitor with a Mac Pro without an adapter, even though the Mac Pro does have mini DVI ports?
    I use a 24" LED with my Mac Pro. Works a treat!
    Does this help you? http://support.apple.com/kb/TS2400
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

  • Latest version that will work with Mac mini Core SOLO under Snow Leopard?

    Latest Flash Player 11 versions will work with Snow Leopard, but they say they require a Core Duo or newer processor.  What is the last stable version of FP that will work on my mom's Mac mini 1.5Ghz Intel Core Solo (running OS X 10.6.8)?
    Have searched archives and web for this and still draw a blank.  Thanks!

    Fixed it!
    I mounted it in target mode again and manually applied the 10.5.4 combo updater ad it now boots again.

  • Apple Remote not working with Mac Mini

    Hi there,
    I woke up to quite a strange problem today... My Apple Remote is no longer working with my Mac Mini! I tried all the controls, including launching front row, and the volume controls - but no go...
    I even tried it in Windows BootCamp under iTunes, but it still wouldn't work..
    I tried pairing it in System preferences, but again, it wouldn't recognise my apple remote when i held down the Menu+fast forward keys for 5 seconds...
    The weird thing is, it works fine with my iMac on another floor (out of plain sight from my Mini..), and it isn't paired with the iMac or anything...
    Any idea what the problem might be? Thanks in advance!

    So you got a dead remote or a dead battery. Call AppleCare and it will be taken care of. What's the big deal? These things happen from time to time.

  • Apple aluminum keyboard w/o keypad not working with Mac Mini

    I'm in the process of reconfiguring our old Mac Mini to run some of our old games that no longer run on the newer Macs. We had a spare Apple aluminum keyboard (without the numeric keypad) which I thought I'd use with the Mini. The alphanumeric keys work fine, but the function keys don't seem to. (In particular, I can't get the volume keys to work.)
    I've checked my keyboard settings in System Preferences. Software Update shows everything up-to-date.
    The aluminum keyboard WITH the numeric keypad works fine with the Mini. Also the keyboard without the keypad works properly with my Intel iMac.
    Does anyone know what's going on?

    Hi,
    am I right in assuming that you are talking about the Wireless Aluminum Apple keyboard ?
    If so, the 2009 version of it requires OSx Leopard 10.5.8 to work properly.
    http://support.apple.com/kb/HT1809
    The 2007 version of that keyboard requires at least OSX Tiger 10.4.10 plus this keyboard software update http://support.apple.com/kb/HT2394
    Maybe downloading and apllying the update can help.
    Regards
    Stefan

  • Can't get mouse to work with mac mini

    Yes, I replaced the batteries.
    Not sure what's going on. I booted the Mac Mini and the message I'm getting is "Searching for mice -0 found" then it will attempt to search again...nothing. I've attempted keyboard commands, but I'm unable to close out the window that asks me to connect to a network. Any guidance would be great. Thanks!

    First try and see if the mouse is working. Look in System Preferences > Bluetooth and see if the mouse shows as connected or not. If it does and you are still getting the message, select the mouse then click on Advanced and UNcheck "Open Bluetooth Setup Assistant at startup is no mouse or trackpad is detected."
    If the mouse is NOT connected then try creating a clean Bluetooth environment by disabling any and all Bluetooth emmiters whithin 30 or 40 feet such as iOS devices (iPhones, iPads, iPads); other Blutooth keyboards, mice, trackpads; other computers, etc.
    Sometimes cycling Blutooth of then on again can help (which is why I always keep a wired mouse and keyboard around). If the mouse was previously paired with the computer, and you have a wired mouse handy, in System Preferences > Bluetooth select the icon for the mouse then Control+Click and select "Remove" from the contextual menu then retry pairing.
    The good news is once you get past this glitch, the next time you reboot pairing should go transparently.

  • Can not get Samsung 22" LED TV to work with Mac Mini (2009), 'No Signal' message. any suggestions?

    I've just purchased a Samsung 5000series 22" LED TV to use with my Mac Mini (2009). I'm connecting using VGA with VGA adapter to MacMini. The TV is reading an error message saying there's no signal. Already tried with a 32" LG and it worked, as well as with a Dell moniter but can't seem to get this Samsung to work... PLEASE HELP!!

    That is not totally true. Instead of using an analog VGA connection, try using a Mini DisplayPort to HDMI Adapter and HDMI cable with that Samsung Monitor.
    About Mini DisplayPort to HDMI adapters

  • External Isight Not Working With Mac Mini

    Hello
    Thank You for taking the time to look at this for me , I have 2 external isight cameras and i can get neither one to work with my late 2009 mac mini running snow leopard , although they both work on the latest mac mini (running lion) , When connected they open Ichat Av but i cant get a video from them.
    Thanks In Advance

    27/10/2012 11:10:33
    com.apple.launchd[1]
    *** launchd[1] has started up. ***
    27/10/2012 11:11:02
    com.apple.launchd[1]
    (com.parallels.vm.prl_naptd) Unknown key for boolean: SuccessfulExit
    27/10/2012 11:11:05
    com.apple.WindowServer[79]
    Sat Oct 27 11:11:05 Jordan-Bakers-Mac-mini.local WindowServer[79] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    27/10/2012 11:11:34
    com.parallels.vm.prl_naptd[129]
    QKqueueFileSystemWatcherEngine::addPaths: open: No such file or directory
    27/10/2012 11:11:34
    com.parallels.vm.prl_naptd[129]
    QFileSystemWatcher: failed to add paths: /Library/Managed Preferences
    27/10/2012 11:11:34
    com.apple.launchd.peruser.501[160]
    (com.kodak.BonjourAgent) Unknown key for string: Kodak Version
    27/10/2012 11:11:34
    com.apple.launchd.peruser.501[160]
    (com.kodak.BonjourAgent) Unknown key: Kodak Version
    27/10/2012 11:11:34
    com.apple.launchd.peruser.501[160]
    (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    27/10/2012 11:11:38
    [0x0-0xa00a].SoftwareUpdateCheck[173]
    SoftwareUpdateCheck: network unreachable
    27/10/2012 11:11:38
    com.apple.launchd.peruser.501[160]
    ([0x0-0xa00a].SoftwareUpdateCheck[173]) Exited with exit code: 3
    27/10/2012 11:11:38
    com.apple.launchd[1]
    (com.apple.suhelperd[175]) Exited with exit code: 2
    27/10/2012 11:11:43
    com.parallels.vm.prl_pcproxy[190]
    QKqueueFileSystemWatcherEngine::addPaths: open: No such file or directory
    27/10/2012 11:11:43
    com.parallels.vm.prl_pcproxy[190]
    QFileSystemWatcher: failed to add paths: /Library/Managed Preferences
    27/10/2012 11:11:43
    com.apple.launchd.peruser.501[160]
    (com.apple.Kerberos.renew.plist[187]) Exited with exit code: 1
    27/10/2012 11:11:44
    WitnessUserAgent[191]
    WitnessUserAgent r304 started for user 501
    27/10/2012 11:11:54
    WitnessUserAgent[191]
    Connected to daemon: <BUDaemonServer: 0x10ea50>
    27/10/2012 11:12:26
    uclocator[192]
    Core Location could not establish your current location
    27/10/2012 11:12:26
    uclocator[192]
    Error Domain=kCLErrorDomain Code=0 "The operation couldn’t be completed. (kCLErrorDomain error 0.)"
    27/10/2012 11:12:39
    System Preferences[217]
    .scriptSuite warning for result type of command 'timedLoad' in suite 'SystemPreferences': the type NSNumber ('long') doesn't match the result Apple event code ('doub').
    27/10/2012 11:12:59
    com.apple.launchd[1]
    (com.apple.xprotectupdater[34]) Exited with exit code: 255
    27/10/2012 11:13:11
    com.apple.launchd.peruser.501[160]
    (com.apple.AirPortBaseStationAgent[189]) Exited: Killed
    30/10/2012 16:51:29
    com.apple.launchd[1]
    *** launchd[1] has started up. ***
    30/10/2012 16:51:55
    com.apple.launchd[1]
    (com.parallels.vm.prl_naptd) Unknown key for boolean: SuccessfulExit
    30/10/2012 16:51:56
    com.apple.WindowServer[87]
    Tue Oct 30 16:51:56 Jordan-Bakers-Mac-mini.local WindowServer[87] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    30/10/2012 16:52:00
    com.apple.launchd[1]
    (com.apple.xprotectupdater[33]) Exited with exit code: 252
    30/10/2012 16:52:10
    com.parallels.vm.prl_naptd[136]
    QKqueueFileSystemWatcherEngine::addPaths: open: No such file or directory
    30/10/2012 16:52:10
    com.parallels.vm.prl_naptd[136]
    QFileSystemWatcher: failed to add paths: /Library/Managed Preferences
    30/10/2012 16:52:10
    com.apple.launchd.peruser.501[160]
    (com.kodak.BonjourAgent) Unknown key for string: Kodak Version
    30/10/2012 16:52:10
    com.apple.launchd.peruser.501[160]
    (com.kodak.BonjourAgent) Unknown key: Kodak Version
    30/10/2012 16:52:10
    com.apple.launchd.peruser.501[160]
    (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    30/10/2012 16:53:35
    com.parallels.vm.prl_pcproxy[196]
    QKqueueFileSystemWatcherEngine::addPaths: open: No such file or directory
    30/10/2012 16:53:35
    com.parallels.vm.prl_pcproxy[196]
    QFileSystemWatcher: failed to add paths: /Library/Managed Preferences
    30/10/2012 16:53:36
    WitnessUserAgent[197]
    WitnessUserAgent r304 started for user 501
    30/10/2012 16:53:36
    com.apple.launchd.peruser.501[160]
    (com.apple.Kerberos.renew.plist[193]) Exited with exit code: 1
    30/10/2012 16:53:50
    Photo Booth[182]
    *** <QCNodeManager | namespace = "com.apple.QuartzComposer" | 391 nodes>: There is already a node registered with name "/userbackdrops"
    30/10/2012 16:53:50
    Photo Booth[182]
    *** <QCNodeManager | namespace = "com.apple.QuartzComposer" | 391 nodes>: There is already a node registered with name "/userbackdrops"
    30/10/2012 16:53:52
    Photo Booth[182]
    *** <QCNodeManager | namespace = "com.apple.QuartzComposer" | 391 nodes>: There is already a node registered with name "/userbackdrops"
    30/10/2012 16:53:52
    Photo Booth[182]
    *** <QCNodeManager | namespace = "com.apple.QuartzComposer" | 391 nodes>: There is already a node registered with name "/userbackdrops"
    30/10/2012 16:53:52
    Photo Booth[182]
    *** <QCNodeManager | namespace = "com.apple.QuartzComposer" | 391 nodes>: There is already a node registered with name "/userbackdrops"
    30/10/2012 16:53:53
    WitnessUserAgent[197]
    Connected to daemon: <BUDaemonServer: 0x401100>
    30/10/2012 16:53:54
    Photo Booth[182]
    *** <QCNodeManager | namespace = "com.apple.QuartzComposer" | 391 nodes>: There is already a node registered with name "/userbackdrops"
    30/10/2012 16:53:55
    Photo Booth[182]
    *** <QCNodeManager | namespace = "com.apple.QuartzComposer" | 391 nodes>: There is already a node registered with name "/userbackdrops"
    30/10/2012 16:53:55
    Photo Booth[182]
    *** <QCNodeManager | namespace = "com.apple.QuartzComposer" | 391 nodes>: There is already a node registered with name "/userbackdrops"
    30/10/2012 16:54:25
    uclocator[198]
    Core Location could not establish your current location
    30/10/2012 16:54:25
    uclocator[198]
    Error Domain=kCLErrorDomain Code=0 "The operation couldn’t be completed. (kCLErrorDomain error 0.)"
    30/10/2012 16:55:07
    iChatAgent[225]
    [Warning] [AIM] Could not change my visibility to 0
    30/10/2012 17:01:48
    [0x0-0x1c01c].com.skype.skype[258]
    WirelessAttach: IOServiceOpen error: e00002c7
    30/10/2012 17:01:48
    [0x0-0x1c01c].com.skype.skype[258]
    WirelessAttach: IOServiceOpen error: e00002c7
    30/10/2012 17:01:49
    [0x0-0x1c01c].com.skype.skype[258]
    WirelessAttach: IOServiceOpen error: e00002c7
    30/10/2012 17:01:49
    [0x0-0x1c01c].com.skype.skype[258]
    WirelessAttach: IOServiceOpen error: e00002c7
    30/10/2012 17:04:01
    iChat[222]
    ------ startPreview:  previewing: 2
    30/10/2012 17:04:23
    iChat[222]
    ------ startPreview:  previewing: 2
    30/10/2012 20:38:13
    com.apple.launchd[1]
    *** launchd[1] has started up. ***
    30/10/2012 20:38:45
    com.apple.launchd[1]
    (com.parallels.vm.prl_naptd) Unknown key for boolean: SuccessfulExit
    30/10/2012 20:38:48
    com.apple.WindowServer[78]
    Tue Oct 30 20:38:48 Jordan-Bakers-Mac-mini.local WindowServer[78] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    30/10/2012 20:38:48
    com.apple.launchd[1]
    (com.apple.xprotectupdater[33]) Exited with exit code: 252
    30/10/2012 20:39:07
    com.parallels.vm.prl_naptd[129]
    QKqueueFileSystemWatcherEngine::addPaths: open: No such file or directory
    30/10/2012 20:39:07
    com.parallels.vm.prl_naptd[129]
    QFileSystemWatcher: failed to add paths: /Library/Managed Preferences
    30/10/2012 20:39:07
    com.apple.launchd.peruser.501[158]
    (com.kodak.BonjourAgent) Unknown key for string: Kodak Version
    30/10/2012 20:39:07
    com.apple.launchd.peruser.501[158]
    (com.kodak.BonjourAgent) Unknown key: Kodak Version
    30/10/2012 20:39:07
    com.apple.launchd.peruser.501[158]
    (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    30/10/2012 20:39:11
    com.parallels.vm.prl_pcproxy[184]
    QKqueueFileSystemWatcherEngine::addPaths: open: No such file or directory
    30/10/2012 20:39:11
    com.parallels.vm.prl_pcproxy[184]
    QFileSystemWatcher: failed to add paths: /Library/Managed Preferences
    30/10/2012 20:39:11
    com.apple.launchd.peruser.501[158]
    (com.apple.Kerberos.renew.plist[181]) Exited with exit code: 1
    30/10/2012 20:39:11
    WitnessUserAgent[185]
    WitnessUserAgent r304 started for user 501
    30/10/2012 20:40:09
    com.apple.launchd[1]
    *** launchd[1] has started up. ***
    30/10/2012 20:40:35
    com.apple.launchd[1]
    (com.parallels.vm.prl_naptd) Unknown key for boolean: SuccessfulExit
    30/10/2012 20:40:36
    com.apple.WindowServer[87]
    Tue Oct 30 20:40:36 Jordan-Bakers-Mac-mini.local WindowServer[87] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    30/10/2012 20:40:38
    com.apple.launchd[1]
    (com.apple.xprotectupdater[33]) Exited with exit code: 252
    30/10/2012 20:40:49
    com.parallels.vm.prl_naptd[128]
    QKqueueFileSystemWatcherEngine::addPaths: open: No such file or directory
    30/10/2012 20:40:49
    com.parallels.vm.prl_naptd[128]
    QFileSystemWatcher: failed to add paths: /Library/Managed Preferences
    30/10/2012 20:40:49
    com.apple.launchd.peruser.501[159]
    (com.kodak.BonjourAgent) Unknown key for string: Kodak Version
    30/10/2012 20:40:49
    com.apple.launchd.peruser.501[159]
    (com.kodak.BonjourAgent) Unknown key: Kodak Version
    30/10/2012 20:40:49
    com.apple.launchd.peruser.501[159]
    (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    30/10/2012 20:40:50
    com.apple.launchd.peruser.501[159]
    (com.apple.Kerberos.renew.plist[182]) Exited with exit code: 1
    30/10/2012 20:40:50
    com.parallels.vm.prl_pcproxy[185]
    QKqueueFileSystemWatcherEngine::addPaths: open: No such file or directory
    30/10/2012 20:40:50
    com.parallels.vm.prl_pcproxy[185]
    QFileSystemWatcher: failed to add paths: /Library/Managed Preferences
    30/10/2012 20:40:50
    WitnessUserAgent[186]
    WitnessUserAgent r304 started for user 501
    30/10/2012 20:40:52
    WitnessUserAgent[186]
    Connected to daemon: <BUDaemonServer: 0x10f390>
    30/10/2012 20:41:30
    uclocator[187]
    Core Location could not establish your current location
    30/10/2012 20:41:30
    uclocator[187]
    Error Domain=kCLErrorDomain Code=0 "The operation couldn’t be completed. (kCLErrorDomain error 0.)"
    30/10/2012 20:42:21
    com.apple.launchd.peruser.501[159]
    ([0x0-0x11011].com.apple.iChat[209]) Exited: Terminated
    30/10/2012 20:44:07
    iChatAgent[230]
    [Warning] [AIM] Could not change my visibility to 0
    30/10/2012 20:44:41
    iChat[228]
    ------ startPreview:  previewing: 2
    30/10/2012 20:45:26
    com.apple.launchd.peruser.501[159]
    ([0x0-0x18018].com.apple.iChat[228]) Exited: Killed

Maybe you are looking for

  • Unable to use SSO with universe connection on top of SAP BW query

    Hi, We're creating a universe on top of a SAP BW query by using universe designer. We logon to universe designer by using SAP credential. When creating the connection, we set the option "Use Single Sign On when refreshing reports at view time" in ord

  • FI report related to Cash Customer Billwise Details

    Hi ABAP Gurus, Any body is having the report on Cash Customer Bill wise Details (with invoice details) ? Input criteria - Company Code, Plant, Cash Customer Name(customer Name given while creating cash customer) & Date Range(Document date). I am usin

  • Server not found in Kerberos database (7)

    Hi! Running the examples from http://java.sun.com/javase/6/docs/technotes/guides/security/jgss/lab works fine for me as long as I use the Kerberos test realm I have set up on a unix machine. But when I run the same classes against our Active Director

  • Strange Situation for PO modification

    Hi, I have come across a very interesting case. A PR is processed and PO is created against that PR. But in Quantities tab, Ordered QTY is 0. Open Qty is same as PR qty. Also, in Status tab, it shows PO & RFQs for that PR. On analysing I found that i

  • Subtitles automatically on?

    Hi everyone, new here. I am authoring a dvd for a client and they would like me to make it so that the english subtitle track which i have created for the DVD is automaticaly enabled when one plays the DVD. Is there a way to do this? I can get the su