CRT results are not appearing after successful payroll run

CRT results are not appearing after successful run of US payroll, however, RT results are appearing.
Please suggest ideas to find the results of CRT.

Hi Rémi Corriveau,
Thank you for spending your time to answer my question.
Here are the answers to your questions . . . .
QUESTION: Did you run a Payroll Simulation or a live Payroll Calculation ?
ANSWER: We did a LIVE payroll run for a period of 3 months.
QUESTION: Did you use t-code pc_payresults ?
ANSWER: Yes, we used the t-code pc_payresults but still it doesn't show the CRT results.
QUESTION: Did you check Processing Class 30 and 70 for your WTs ?
ANSWER: As per the process, we copied the SAP standard (model) Wage Type M010 to
our customized Wage Type, hence, hope that it wouldn't disturb any of the standard SAP settings.
However, we did check the Processing Class 30, but did not check the processing class 70.
Shall update you once PC 70 is also checked.
Please educate, if there are any particular specifications that need to be entered while checking
for our WTs in PC 30 & PC 70.

Similar Messages

Why new contacts are not appearing after some time?

I Am using iPhone6, iPad New and iPad mini. The contacts which I saved in iPhone are not appearing after some time. I don't know whether it is related with synchronisation of other devices. Please help me if you know the reason.

Hi,
Have you checked the filtering option in contacts? Open contact menu button > filter. Perhaps you have a filter hiding the contacts.
What are your thoughts about this forum? Let us know by doing this short survey.

Results are not appearing in report

Hi All,
When user ran the report, it gives below error.
A general error has occured[nQSError:1207]Unexpected socket read timeout: connection terminated by network, e.g. by the firewall.
But when ran the query in the backend it fetching the results and in criteria it contains SET OPERATOR with UNION,but not appearing the results in report.
Regards,
Niranjan

Hi, Thanks for your response...
When i ran the report with diffrent/default combination then i am getting the results.
In my criteria SET operator is used for combining of similar request and we have diffrent filter conditions and dashboard prompts also.
Connection from back end is fine,because iam able to get other report results also.
Regards,
Akkapeddi

Checks are not generated after Automatic payment run

Hello,
I have a strange issue. Payment has been executed normally through APP. However some of the checks are not printed and it is not gone to PAYR table as well. I can see the payment documents in REGUH table and the documents have been cleared. This is not a new vendor and the check payments have been made to this vendor through this process.
Could you please suggest what could have gone wrong as PAYR & REGUH table and payment list from ZF110 must match. Here it matches only REGUH & Payment list from ZF110. The vendor has been asking for the payment and we realized this issue
Thanks
Ivan

Please check if relevant print variants have been assigned in the relevant check print program (RFFOUS_C for e.g.). If you have posted in 3 company codes and assigned check print variant in only 2 company codes, then some of the checks will not be printed even if the payment document has been posted.
As part of business process, it is always useful to print the payment list and reconcile atleast if the number of expected checks have been created.
Ron

Some functionalities in ABAP are not appearing after IE7

Hi,
Yesterday I did windows update and it upgraded my IE version from 6 to 7. After this upgrade, I am unable to view certain areas in ABAP.
For example if I go to SE80, the portion where we can select the drop down (Program, BSP application, ITS etc) and the place where we enter the program name - is totally blank.
Also if I click F1 on ABAP key word, the key word documentation is appearing blank - only the left side tree for "ABAP - The SAP programming language" is appearing - nothing on right side - it is totally empty!!.
Kindly suggest what should I have to do to get back all.
Thanks,
Krishnan V

Hi,
the patch download is not easy to find. Here's the link (on marketplace)
<a href="https://smpdl.sap-ag.de/~swdc/012002523100007945712006D/gui640_22-10001615.exe">gui640_22-10001615.exe SAP GUI for Windows 6.40 Patch</a>
Regards,
Clemens

Payment term and Baseline date are not appear after residual clearing

Hi Friends,
We have an issue in Payment term. Recently small changes were made in OBA3.Here they enable the option of "Payment term from invoice". the function of this is to - copy the payment term and baseline date form invoice to Partial item .Due to enable of this function after residual clearing the payment term and base line fields are get empty.
Now user want to get these fields to be updated even not changes take place in OBA3.Can you please suggest me the way, with out changes in OBA3 can we get payment term and baseline date field after residual clearing .Please suggest .
Thank you
Regards,
Dharma

Hi Julie,
Thanks for your reply..
Here the issue is, the user using Baseline date for two specific purpose.
1.Due day calculation-auditing purpose
2.Agning report
For due day calculation they recently enable the option "payment term from invoice in -OBA3".Due to active the function,system copy the payment term and baseline date from invoice to residual item.it means the residual item having baseline data as invoice date not posting date.
But for aging report purpose it has to be update posting date.
now user want to meet these both requirement .How can it possible .Please suggest.
Thank you
Regards
Dharma

TLN and content area are not visible after successful login

Hi Gurus,
I hav IE6.0 on my system with a localhost installed(EP6.0).The other configuration are: OS Windows XP Professional and Oracle 9.x on my PC. It is working fine.
We are on EP7.0 in our organisation. Previously I was able to access the portal server, but after installing localhost I am havin problem accessing the EP7.0 server from my PC. Wherein I am able to access the same EP7.0 server from others' PC.Nobody is able to access EP7 server from my PC.
Plz suggest some solution.
Thanks a lot
biroj......

1.Refer the following threads
Re: Browser compatibility
Re: Using Mozilla & Safari
Re: Do the BSP's work in Mozilla 1.7.3?
https://websmp108.sap-ag.de/~form/handler?_APP=00200682500000002212&_EVENT=DISPLAY
2.Go to http://service.sap.com/PAM
And select Netweaver from the right side and the contents get displayed. Now select the browser tab
3.You can also check the same from your installation folder.
<>SAPNetWeaver04SneakPreviewSlimSP11DOChtmlsystemrequirements.htm
Thanks
Swathi
pls reward points if was useful in any way

"My folders" and "Shared Folders" are not appearing

Hi All,
"My folders" and "Shared Folders" are not appearing after integrating with BI server(11.1.1.1.5). Any help?
Regards,
Kishore P

Tgara wrote:
There are plenty of apps in the App Store that can do what you want, and many are free.
There are not currently (or at least I haven't found any) any weather apps that will appear in the Notifications Center the way the included app does on the iPhone. It's not a big deal for me but I can understand the people who want it.

After GL Year opening the months of new year are not appearing in open period window of Gl?

Hi All,
After GL Year opening the months of new year are not appearing in open period window of Gl? Am i missing any thing???
regards
Shahzad M. Saleem

Have you checked GL setups
Setup accounting manager >
Query your OU >
Under setup steps click on Update for ledger
Under accounting calendar
Number of future enterable periods.

My voice mail messages are not appearing as they are left. Often no voicemails show up until 4 weeks after they have been left

I am having trouble with my voice mail on the iPhone. The voicemails are not appearing until 3 even 4 weeks after they are left by a caller. Last night 10 voice messages came through all at once, one left before Thanksgiving. Is this an iPhone issue or an issue with the carrier?

I'm having the same issue. It began three or four days ago. I'd notice that I'd miss a call but the person wouldn't leave a message.
Two days later, suddenly three or four new voicemails will pop up from the past couple of days. The time stamp on the messages is correct-- it will show that the caller left the vmail a day or two before.
Also, in what has to be a related problem, some of the voicemails appear to be corrupted and cannot be played.
I have a 4s and my software is up-to-date. I have made no material changes to my phone, other than automatic software updates to explain this.
It's enormously frustrating and as a job seeker, I can't afford to miss voicemails. Does anyone know if this is the phone or the carrier (AT&T)?
Any help and input will be enormously appreciated.

Fcx4 bin clips are not appearing in the viewer after clicking on them.

fcx4 bin clips are not appearing in the viewer after clicking on them , i need help getting them to appear in the viewer.

I have the same issue. I am using apex.oracle.com for some test applications, but for last couple of weeks when I login and click the "Application builder" I could not see my applications there (around 4-5 of them)! It says No applications found.
Neither I have any application groups setup nor do any criteria given in "Application" search field under "Application builder".
The only way I could access some, if not all, of my applications is to pull it from the link under the context box "Recent" (which you can see in the right hand side of the "Application builder" page.)
Any help is greatly appreciated. This issue is not a show stopper as I could still pull out my critical applications from the recent link, but its definitely a worrisome issue.
Thanks in advance
Regards
Ligon Gopinathan

Crystal Report Viewer is not appearing after hosting on server

Dear Friends
I developed a web application in Visual Studio 2010, and my Database is SQL Server 2008 R2.
I created reports using Crystal Report 13 in Visual Studio and my Operating System is Windows 7 32-Bit.
All reports are running fine at my machine.
When I copied published folder into "wwwroot" folder and hosted, all reports are working Good.
Here i have my web application in "Default Web Sites" in IIS.
Then After I added a new website in IIS with a port No. and created a virtual folder and hosted my web application.
The application is running fine, But the problem is Reports are not appearing on Web Page.
I have created an toolbar to export the report. And when I am exporting the report to PDF, It is working well and reports are exported successfully.
I didn't understand why this is happening?
Is this a problem of port no. ?
or
Is this a problem of IIS?
or
Is this a problem of Browser?
or
Is this a problem with CrystalReportViewer?
or
something else?
In fact I have the folder for "C:\inetpub\wwwroot\aspnet_client\system_web\4_0_30319\crystalreportviewers13". for crystal reports.
Dear All kindly help me in this issue, it is disturbing me since 5 days.
All helps are appreciable.
Thank you.

Enter the following:
viewer blank net crystal
into the search box in the top right corner. You should get a number of hits (Kbases and articles) that should point you to a solution.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

HT1386 My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?

Hi, My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?
Documents say
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it....
But I can't see my iPad Mini in iTunes.
And my Ipad (Settings, General, iTunes Wifi Sinc) shows a message :" Sync will resume when xxx(my PC with iTunes) is available "...
Both are in the same network,
Ipad mini is is plugged in to power
. iTunes is open on the computer
what can i Do ???

Hi Skydiver119, and tks for four interest.
I have done exactly as you say, but it does not work for me.
You indicated " Navigate to the info tab and scroll down. There'll be a check box for 'sync over wifi' or something to that effect. Check that box and sync to affirm your choice."
I navigated to Summary tab (not Info Tab) and checked "Sync with this ipad over Wi-Fi"
I disconnect the wire,
and my iPad disappears from my iTunes screen.
in my iPad ->Settings -> General -> iTunes Wi-Fi Sync -> says " Sync will resume when (my PC) is available.
So, I can not sync via wi-fi
I appreciate if you can help me.

E-Rec Reference Code in the Publication tab should not appear after enddate

hi,
There is a requirement from the client after the end date of the publication ,the reference code should not be displayed to the candidate in the Candidate page ,presently the same is manually done in the system by changing the status to withdrawn.
Is there any way by which we can automate the process by change in customising by which the reference code does not appear after the end date
Please provide a solution if something can be done in the standard setting or do we require any Zworkflow to be developed for the same.
Regards
RK

Hi RK,
this is nothing the standard supports.
But I would not use a workflow here. As this is a mass handling workflow is no good idea. This is a task for a customer periodical service. Just build a class implementing the periodical service interface which gets all released publications which have a publication end in the past and status released and change their status using the cl_hrrcf_posting_inst_bl. This should be done in a couple of hours. Add the customizing and the issue is solved.
A requirement in this context where a customer workflow is quite handy in my opinion is a customer workflow which closes all postings and withdraws released publications when you close the requisition. This reduces the steps a recruiter has to do and ensures that no candidate applies although you are already done with the requisition.
Kind Regards
Roman

In case of Factory sales, ECS values alone are not appearing

Hi friends,
In case of Factory sales, ECS values alone are not appearing in the sale order
and billing document even after maintaining excise rates in J1ID as 2% and condition
record as 100% for both JECS and JECX condition types, finally I checked with tax
code but still I am facing same problem. But same 2% values are appearing in J1IIN
screen.
Please help me out in solving this problem.
Thanks and regards,
Swamy H P

Dear Swamy
Ensure the following in your pricing procedure, for condition type JECS.
- The "From-To" step number should be the step number of JEX2.
- The Calculation Type should be 366
- For JEX2, Calculation Type 353 and Account Key EXD are maintained
thanks
G. Lakshmipathi

CRT results are not appearing after successful payroll run

Similar Messages

Maybe you are looking for