CRT With LCD Laptop

I was told that it’s bad to have an up and running CRT monitor in close proximity to an up and running laptop with an LCD display.
Is there any truth to that?
Message was edited by: HappyWarlock

HappyWarlock,
Hmmm. I've never heard this, but I could see where a CRT might adversely affect an LCD with fluorescent backlighting. I don't see the same thing affecting an LED backlit display, though. I'm not entirely certain that there is even a problem with fluorescent displays.
If you have an older, fluorescent backlit display, you might want to look further into this, but I think it might be false.
Scott

Similar Messages

  • Replace CRT with LCD

    Hi every one . I have looked at the conversion to a LCD from the eMac CRT . i was thinking Could i remove the CRT and just run a LCD off the external monitor port ? or will the computer not work if the CRT is taken out ?

    I take it that the repair isn't going well then?
    Have a look at this page for running an eMac with two LCD monitors - http://www.lbodnar.dsl.pipex.com/eServer/ .. specifically the bit that says parts of the monitor are required for power up of the system..

  • Big lcd screen in conjunction with my laptop

    I have been running LR on my laptop with a 15.4 screen.
    Although it isn't state of the art dual core pc, it runs ok and I am happy with it.
    I was thinking of getting a bigger laptop with a 17 inch screen, but now I'm thinking of getting a big 20 inch lcd and plugging it into my laptop.
    Can anyone give me some advice on the best way to plug it in and tips on calibrating it properly. If I calibrate the new screen, will it "uncalibrate my laptop screen"?
    Any other tips on using a second monitor with the laptop monitor.
    Thanks.

    Remove the machine from any external monitors (make sure to remove from the laptop side-sometimes people remove the cable from the monitor side-).
    If docked, remove from dock.
    Shut machine down, unplugg from power source and remove battery. Without replacing battery or attaching to ac power, "turn machine on" hold power button down for 10-20 seconds.
    Re-install battery and power (make sure not to connect anything else). Do you see the "Thinkpad/Lenovo/IBM" splash screen? If you don't, shut the machine down and try to "shine a flashlight" into the screen...due you see a 'faint" image on the LCD?
    If you do, then it could be due to several reasons in this order:
    Inverter
    LCD (backlight)
    Motherboard.
    There is a "switch" that tells the laptop when the LCD is closed or open, I had this problem on one and it turned out to be nothing more than "dust bunnies" building up on this switch...YMMV
    Good luck.
    Currently own: X220T, X201, X200, T61 X2, X61T X3

  • CRT versus LCD

    Per specs, Apple's old 21" Studio Display (graphite-CRT) and their original 22" Cinema Display (M5662-LCD) have the same ppi (85), but I am struck by the difference in display clarity. Both are set at max resolution: CRT-1600x1200 and LCD-1600x1024. For one thing, text in Microsoft Word looks much sharper on the CRT than on the LCD. It seems pixelated on the LCD. Also, images, such as tiffs, look much sharper on the CRT. The same pics are noticeably grainy on the LCD. Why is this?

    What you're seeing is normal. CRTs create pixels by aiming 3 guns (Red, Green, and Blue) at the back of the tube, to the same spot some distance at the front of the tube, which is coated by phosphors. Naturally, there's going to be a bit of fuzz that way. There are no pixels hard-wired into the front of the screen itself. That's why all resolution settings look equally sharp on a CRT.
    LCDs do have a grid fixed into the screen, creating pixels with naturally hard edges, so they are sharp by nature. That is why only one resolution setting looks right on an LCD and all others look wrong.
    Text looks sharper on an LCD because it really is.
    The image probably isn't "sharper" on the CRT, it probably looks more natural since normal vision is about continuous tones. The human eye actually has to look for edges and the brain processes for them. On the LCD, the pixels are sharper, but that's not like the real world. (Every image pro knows that you can never take an image from a film or print camera and just print it - every image in every medium that look sharp was carefully sharpened by software.) Also, the LCD thin black grid around every pixel you can see if you look up close. That grid slightly disconnects each pixel and could cause the apparent graininess.
    The CRT hid the low resolution of a monitor because everything fuzzed together a little bit. LCDs are brutally honest. It is 85 dpi, and on your LCD now you can see it. Remember, an 85 dpi image is unacceptably low for printing. If future screens continue to use discrete pixels, it will probably take the higher resolution displays like 150+ dpi to make images look more like print again. We are seeing higher resolutions in PC laptops and the iPhone, so it may be on the way. However, one problem is the higher pixel density you have on an LCD the more area the black line grid takes up relative to the screen.

  • Should I get a 13" or 15" Macbook Pro with retina laptop?

    I, FINALLY, after one year of wanting to get a new laptop to use as my primary computer replacing my desktop computer at home.........have decided to switch gears from a Windows computer to a MACBOOK PRO with RETINA laptop. It's not an easy decision when you are spending SO much money on something you hope will last a long time as I do NOT plan on getting a new laptop once I buy this one for a very long time (until it breaks / can no longer function)!
    My dilemma now is whether to go with the high end 13" Macbook Pro OR get a similar if not higher end 15" Macbook Pro. Here's background on myself and what I plan on using the laptop for:
    I plan on using it as my new primary computer for home so primarily for my personal use, but I will be using it also for work so I will be using it for basically EVERYTHING!
    I will use it to do word processing (MS Word), to do my finances (reconcile my bank stmts/accounts), using MS Excel for accounting work, check my emails, research the Internet, photo editing (pretty much basic, definitely not advanced) and creating slideshows with my photos/music, downloading/playing music. I do not plan on using it to play any games.
    I use alot of MS Office / Excel and some Powerpoint - either for work or home.
    I need alot of storage space for photos (recreational - up to 400 per vacation trip) and I plan on creating slideshows with the photos using Apple's great photo/video/slideshow apps! At last count, I had about 100GB of photo files.
    I also need alot of storage for my music files - I have @ least 12GB of music right now and am always downloading more each year.
    I plan on taking it with me outside of home only on the weekends for the most part like to a cafe (Starbucks) or library, but not for anything further than that (not for travel as I will just take my ipad).
    I know it's only ~1lb difference in weight, but a couple of my concerns is since it will be my primary home computer (i.e.I'll be using it in the evenings/on the weekends and probably more (since it's an Apple!) to work on photos/slideshows, if the screen size difference will matter in the longrun in terms of having any impact on my vision (not sure if the 2" will make a difference in that). I'm only 45yo, but I do worry about that!  I tried both the 13" and 15" in the Apple store and the only difference I saw was that the 15" screen allowed you to have multiple programs visible on the screen side by side, but viewing the actual programs was the same (in size). I don't really view programs side by side right now (I use the ALT-TAB shortcut alot to view multiple programs I have open at once), but I could see how having programs viewable side by side could come in handy.
    I had a Toshiba 17" laptop before that was too HEAVY to lug around even if on the weekend so I no longer want a heavy laptop and want something more portable to take with me on my weekend excursions to the local cafe/library which basically means going from home to car and car to location at most, but when I go to use the restroom, I like to take it with me (do not feel safe leaving it behind on table) so I don't want it too heavy.
    I do plan on getting me a Western Digital external hard drive to backup ALL my files yet since I plan on keeping the computer for as long as it'll hold up, I want to make sure I have alot of storage to keep up with me. I like the flashdrive component because there are fewer moving parts so less likely to have problems in the long run and given that (despite my need for alot of storage), I'll backup my photos/music to external drives should I end up maxing out on my storage.
    I value your opinions, please help me DECIDE!!!!! I'm frustrated and it's driving me nuts!!! I know it's too much to ask, but if they had a 14", I would probably go with it!  A 2" difference seems pretty big. :-)
    THANK YOU!!!

    Thanks guys. I'm set on the 15" now and am now deciding on whether I should go with the standard MBP or the MBP with retina display? I'm not an advanced photographer, but I do like to take alot of photos especially when travelling and I do plan on creating slideshows with my photos synched with music. I don't think I'd be one to really be able to tell the difference between a retina vs. non-retina screen given that since I can't really tell the difference between a tv screen with vs. without HD. So for me, I don't think it'd be about the retina display at all. It is more about the storage capacity AND the fact that I hear with the retina/flash storage, that there are less apt to have problems down the road so a more sturdy a machine.  Given I take alot of photos/will be creating slideshows wth my photos, and downloading/playing music, I'm thinking the standard MBP might be better storage-wise. But also given I plan on keeping this laptop for a long time (basically, until it breaks or becomes too slow to function productively), that makes me want to go the retina/flash storage route. SIGH.
    Should I not be so concerned about the longevity of the machine, but rather opt for the one with more storage? 

  • Please help me with my laptop!

    Hello.  I have a Toshiba Satellite L355d-s7815. It was bought in September. I go to school fulltime online so this computer has been used almost every single day since it's been purchased. And up until two weeks ago it worked just fine.
    Now, it turns itself off.  I could be in the middle of an exam, and it will just click and turn off. No warning signs, no popups. No messages from virus protection.  
    Then when I try to turn it back on, it will just click and turn off a few times. I usually let it sit for a few minutes, then try it. Then the message saying it couldn't start comes on and after searching for 10 minutes tells me to restore it. I click yes, because it won't let me choose anything else. And then when it finally gets done, my Kaspersky is going all crazy telling me my 'black files are corrupted'. and makes me update and then it says I'm fine. 
    It does this to me on different occasions.  While on the internet. While burning a dvd. And EVERYTIME I do something that requires a restart of my computer. That is how it started. It began about two months ago, but only when a program tried to automatically restart. But in the last week it does it whenever it feels like it.  I need this computer for school so I need all the help I can get into getting this computer back on track. 
     Also, this is my first laptop.  So I don't know what all I could be doing wrong!
    Thank You.
    Message Edited by ccraisins on 04-21-2009 01:26 PM

    I assume you have nothing plugged into any of the port (usb/etc) and played in CD drive.
    When you read this DO THESE FOLLOWING TASKS IMMEDIATELY
    >> Backup your files... all of them (or anything that worth saving - including saved games etc)
    >> Check if the laptop fan is working or not clogged with dust etc. Some computer just die when its too hot. 
    >> Prepare/burn toshiba restore CD
    >> Optional: Try to work in air conditioned room / with laptop slightly raised from the table surface for better air circulation and see if it work better. 
    There are two major possibilities that I could think of
    1. hardware screwup
    2. software screwup
    It is harder to test for #1, so I will suggest on eliminating #2
    1. Go to Windows Systems Restore, try to restore your computer to the day before you suspect there is something wrong with your laptop
    2. Reformat the computer... as painful as it might sound, there are high chance that people at Toshiba depot do this the minute they receive your laptop (ps: Did I mention backup your files)
    If 1 or 2 do not solve your problem, there is a pretty high likelihood that your problem involves hardware malfunction. Call their support center on how to initiate warranty claim.
    ps: you might considering buying a netbook when your laptop is repaired. 
    thats my 2 cents
    Please update me on the progress.  

  • How do I use two external monitors with my laptop?

    I have a new Pavilion dm4-301 d cl Entertainment PC.   My OS is Windows 7.   I am used to using two external monitors with a docking station.   This new laptop does not have a docking station.  What do I need to get  to use two external monitors? 
    This question was solved.
    View Solution.

    Certainly not without a dock but even with, HP laptop docks pretty well limit you to one of the external monitor ports, even if there are two on the dock. We have used a device called an Atlona AT-HDPIX2 which is a usb to hdmi adapter. It provides a third monitor capability for a laptop....use the native external monitor port and the internal laptop display and then this device gives a third monitor which is full configurable from the Windows 7 display interface...clone, extend, etc. It allows full HD resolution and is responsive enough for even light gaming.  HP makes no true docking station for your laptop. 

  • Voyager Legend will not work with my laptop

    I have an HP Pavilion dv6-3120us Entertainment Notebook PC with Windows 7(64-bit). I recently purchased a new bluetooth headset and am unable to get it to work with my laptop. The Previous headset was a Plantronics Voyager Pro which worked great with my laptop, all I had to do was pair it and that was that. My new headset is the Plantronics Voyager Legend and after pairing, it starts installing drivers and all but one are fine. 
            Bluetooth AV                                               Ready to use
            Bluetooth Remote Control                       Ready to use
            Bluetooth AV Remote Control Target   Ready to use
            Bluetooth Peripheral Device                   No Driver Found
            Bluetooth Hands-free                               Ready to use
    I've uninstalled, reinstalled several times and it didn't help, It shows that the device is paired, but doesn't reroute audio to the headset or the microphone. It shows in audio devices but says disconnected, when I click on 'connect', nothing happens and 'set as default' is grayed out and I cannot select it. I know that there is a separate bluetooth USB adapter available, but I'm using the headset mostly for my phone (which works fine) and occasionally my laptop so I don't really want to purchase it. I've already contacted Plantronics about the issue and this was their response:
    "Thank you for contacting Plantronics Technical Support.
    If you are using built in blue tooth and not our blue tooth USB adapter unfortunately we cannot assist you with your built in blue tooth, Plantronics does not supply drivers, here is our statement with regards to using built in blue tooth:
    If you are pairing the headset directly to your computer, the drivers that are required are for your computer's internal Bluetooth adapter. You will need the drivers supplied by your computer's manufacturer in order for you to use your Bluetooth headset as an audio device.
    Different computer manufacturers and computer models will use different internal Bluetooth adapters, so you'll have to contact your computer manufacturer to get those drivers. Most major computer manufacturers have a "Drivers" or "Drivers and Downloads" page on their web site in which you can enter your computer model in order to retrieve available drivers. You can typically find the Bluetooth drivers under the "Network" category. "
    I've checked for bluetooth driver updates and it says that none are available, I've also uninstalled and reinstalled the bluetooth drivers from the laptop. Sorry that this is a short novel, but I wanted to make sure to give all available details, any help or advice would be welcome. Thank you in advance.

    Hi Nt_winters,
    Thank you for all the information, it is very useful. I understand you are having an issue with HP Pavilion dv6-3120us Notebook with Windows 7 and your new Plantronics Voyager Legend. In the device manager are all unknown devices removed as well as the Bluetooth devices for the headset? Broadcom is recommended for Plantronics Voyager Legend headsets. Here is a link to that driver.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • My Ipod wont sync with my new library and I dont know why not. It will show that it is connected through home sharing, but it is only avalible when i am with my laptop! I dont know how to get this current library as mine on my ipod, help!

    My ipod will not sync with my laptop. I have had previous Ipods in the past, but since then I have grown out of most of my music. Also about a year and a half ago I got a new laptop. I used the same Itunes name, but now on my new Ipod it has all of my old music and it refuses to download any of my new music. When I am using home sharing though, it says that I can turn on my "Library" but that my "music" is what is perminately on the computer. This only works though if I am near my laptop. When I try to transfer my library onto my ipod it wont let me. My music on my ipod is completely different than my normal itunes library on my computer and I have no idea how to transfer it. When I plug it in, it wont sync at all, or show that there is any device even plugged in. I am frustrated and tired of not having any  of my music, so someone please help!!!

    You can only sync to one computer/iTunes library. To make this your syncing computer:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • HT1386 I am trying to sync my iphone with my laptop using itunes.  Items that I enter on my laptop (Windows Outlook) show up on my iphone.  But items that I enter on iphone do not show up in Outlook.  How do I fix this?

    I purchased an iphone 4 in July 2012.  I set it up to synch with Windows Outlook on my 2009 HP laptop computer (Windows 7).  This seemed to work fine.
    A few weeks ago, I was notified that my itunes or iphone software needed updating.  With my iphone plugged into my computer, I performed the update.  When it was over, I had an error message on my iphone indicating that it needed to be reset.  I did this and there was no information on my iphone.  I then synched with the laptop and everything appeared to be restored.
    HOWEVER, now when I synch, items that I enter on my laptop show up on my iphone BUT items that I enter on my iphone do NOT show up on my laptop.  How do I fix this?

    All content bought/downloaded from iTunes is tied to the account that downloaded it and it can't be transferred to a different account - so you will need to authorise your old account on that computer if you want to transfer its purchases over.
    Authorising/deauthorising : http://support.apple.com/kb/HT1420
    Syncing with a new computer : https://discussions.apple.com/docs/DOC-3141

  • I purchased a Holux M-1200E Bluetooth GPS Data Logger.  The device paired with my laptop just fine so I know it is working right.  The device will not even show up on my iphone or ipad to pair via bluetooth.  Is there a way to pair without jailbreaking???

    I purchased a Holux M-1200E Bluetooth GPS Data Logger.  The device paired with my laptop just fine so I know it is working right.  The device will not even show up on my iphone or ipad to pair via bluetooth.  Is there a way to pair without jailbreaking???  I haven't had any trouble to date pairing any devic with my iphone or ipad, this is ridiculous!!!!  Is there a way to update my bluetooth settings on my iphone 4s to be able to have this device be recognized???  I love my apple devices, but this is very frustrating.  I bought this Data Logger for a specific purpuse to help out with my Search and Rescue volunteer activities, and I really need help with this!!!  I am hoping apple will help me!!!
    Thanks,
    Melissa

    melissafromlenexa wrote:
    That is not the right device, it is the
    Holux
    M-1200E Bluetooth GPS Logger
    I looked at the same sight for that and it does not say that.  This is the first time I have posted a question, you don't have to be mean about it.  I am trying to get this to work for a good cause. 
    It may be the best source of assistance is the manufacturer of the device. I suspect you will need a specific app for the iPhone to get it to work, but the site is rather ambiguous about that.

  • Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

    Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

    We did that, but it just doesn't seem to be able to connect. So basically we tried to connect to our network and insert the password, but afterwards it does nothing. Weird thing is also that the network symbol (top right of the screen) says that it has been connected, but when I go look at the system preferences --> network, it states that it has not been connected

  • My new i phone 5 wont sync with my laptop, keeps saying failed to connect to sync services. any help?

    I just purchased a new i phone 5. when i go to connect with my laptop it says 'failed to connect to sync services, try again later' it shows my phone, and i can see my app screens, however it wont let me sync, back up or make changes. this is my first apple product, any help would be greatly appreciated.

    Hello there, load dogg.
    The following Knowledge Base article provides some in-depth steps to help troubleshoot the issue you are descibing:
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    http://support.apple.com/kb/ts2690
    Thanks for reaching out to Apple Support Communities for answers to your question.
    Cheers,
    Pedro D.

  • I can not install  Itunes 10.5 on vista or windows 7 my iphone 4 is much slower and freezes when i go to the store they turn me away with my laptops and tell me to buy there computer thats the only answer. I know there has to be away around it?

    I ca not install  Itunes 10.5 on vista or windows 7 my iPhone 4 is much slower and freezes and also certain apps and also certain features will not work on the phone now that I cannot update it to ios5. When I go to the store they turn me away with my laptops and tell me to buy there computer that's the only answer. I know there has to be away around it? I am also up for a new upgrade on my second phone line and was going to get a 4s but now I am thinking it may be the wrong choice I am very unhappy with Apple right now...

    WOW! That font is difficult to read. But, see if this support document helps you http://support.apple.com/kb/TS3989. Photos stream is based on date and photos more than 30 days old are removed. Photostream is designed as a temporary storage to allow you to download the photos to the computer.

  • I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. C

    I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. Suddenly, the "timeout" is not allowing me to connect to my wireless network.

    It could be that there's a new source of interference.
    Use the advice in the second message of this thread to investigate the signal and noise levels that each client sees:
    http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
    By the way, you've been misled by the poor field labeling into trying to type your entire message into the subject field, instead of putting a one-line topic description there.

Maybe you are looking for

  • Preview as default viewer of pdf's in safari

    After changing to Tiger and Safari 2, pdf's are not openend in preview, but in a new Safari window. If I want the pdf in Preview, I'll have to control-click it. However, the pdf then is not on my desktop, so that save as is not possible. How can I ha

  • Bluetooth disappeared from System Preferences

    When I fired up my PowerBook G4 this morning my Bluetooth is no longer available. When I go to System Preferences the Bluetooth preference is not there. I've rebooted to no avail. I've also noticed funny things with the Bluetooth icon in the menu bar

  • How to find Area Report for individual module

    I have created .v file and instantiated several modules.After simulating,how can i get the individual module report 

  • Employee Photo Upload in HRMS

    Hi All I am working in R12 Implementation and here we need to upload the photos of the employees into the applciations.It would be a great help if any one can suggest me on this. Can this be done? If so which way. regards Srujana

  • Since upgrading to ios 5.1, I cannot connect Bluetooth. Any solutions?

    Ever since I upgraded to ups 5.1, I have not been able to connect to my Bluetooth device. Any solutions?