Crtical error occured in PC suite.
I did the s/w update & after that not able to restore back the file taken by the help of content copier.
Crtical error occured (0*80100013) error : you need to restarts your phone & content copier if that doest work restart Your PC. I restarted the system & content copier but, still I get the same error. I uninstalled & reinstalled the PC suite with a fresh new download from nokia.co.in/pcsuite. Please assist.
Hi,
It would be great to know about your phone and pc, in the meanwhile, do have a look on
/discussions/board/message?board.id=topfaq&thread.id=132
Similar Messages
-
Error occur during Pating AD.I.6 on e-Business suite 11.5.10.2
Hi all,
Error occured while applying AD.I.6 on e-Busiiness Suite 11.5.10.2. Show below the error
copying /d03/oracle/testappl/ad/11.5.0/bin/adshell.pl to /d03/oracle/testappl/ad/11.5.0/bintmp/adshell.pl
copying /d03/oracle/testappl/ad/11.5.0/bin/aducsifm.pm to /d03/oracle/testappl/ad/11.5.0/bintmp/aducsifm.pm
copying /d03/oracle/testappl/ad/11.5.0/bin/aducssp.pl to /d03/oracle/testappl/ad/11.5.0/bintmp/aducssp.pl
copying /d03/oracle/testappl/ad/11.5.0/bin/adutils.pl to /d03/oracle/testappl/ad/11.5.0/bintmp/adutils.pl
copying /d03/oracle/testappl/ad/11.5.0/bin/adpchnew to /d03/oracle/testappl/ad/11.5.0/bintmp/adpatchnew
copying /d03/oracle/testappl/ad/11.5.0/bin/adadminnew to /d03/oracle/testappl/ad/11.5.0/bintmp/adadminnew
copying /d03/oracle/testappl/ad/11.5.0/bin/adwrknew to /d03/oracle/testappl/ad/11.5.0/bintmp/adworker
copying /d03/oracle/testappl/ad/11.5.0/bin/adctrlnew to /d03/oracle/testappl/ad/11.5.0/bintmp/adctrlnew
Swapping bintmp and binstage.
Stage preparation complete.
Successfully removed /d03/oracle/testappl/ad/11.5.0/bin/adsplice.bak
Successfully renamed /d03/oracle/testappl/ad/11.5.0/bin/adsplice to /d03/oracle/testappl/ad/11.5.0/bin/adsplice.bak
Successfully copied /d03/oracle/testappl/ad/11.5.0/bin/adsplice_wrapper to /d03/oracle/testappl/ad/11.5.0/bin/adsplice
Successfully removed /d03/oracle/testappl/ad/11.5.0/bin/adctrl.bak
Successfully renamed /d03/oracle/testappl/ad/11.5.0/bin/adctrl to /d03/oracle/testappl/ad/11.5.0/bin/adctrl.bak
Successfully copied /d03/oracle/testappl/ad/11.5.0/bin/adctrl_wrapper to /d03/oracle/testappl/ad/11.5.0/bin/adctrl
Successfully removed /d03/oracle/testappl/ad/11.5.0/bin/adadmin.bak
Successfully renamed /d03/oracle/testappl/ad/11.5.0/bin/adadmin to /d03/oracle/testappl/ad/11.5.0/bin/adadmin.bak
Successfully copied /d03/oracle/testappl/ad/11.5.0/bin/adadmin_wrapper to /d03/oracle/testappl/ad/11.5.0/bin/adadmin
adrelink is exiting with status 1
End of adrelink session
Date/time is Tue Dec 15 23:10:07 WAT 2009
Line-wrapping log file for readability ...
Done line-wrapping log file.
Original copy is /d03/oracle/testappl/admin/TEST/log/adrelink.lsv
New copy is /d03/oracle/testappl/admin/TEST/log/adrelink.log
An error occurred while relinking application programs.
Continue as if it were successful [No] :
Please help me on this.
Thanks
svaHi Hussain
There is no more information in log file.
I done below to retify
To implement the solution, please execute the following steps:
You are setting you environment to wrong file when trying to relink.
$APPL_TOP/SID_servername.env, not $APPL_TOP/APPSORA.env
1. Set the environment using the APPSORA.env file located under $APPL_TOP
directory.
Please refer to Note:149126.1 Relinking in 11.5 Oracle Applications
2. Rename file adrelink.log from $APPL_TOP/admin/log.
cd $APPL_TOP/admin/log
mv adrelink.log adrelink.log.OLD
3. Relink using : adrelink.sh force=y "ad all"
Check newly generated log file $APPL_TOP/admin/log/adrelink.log for errors.
4. Try to run adpatch again, continue previous session, but please make sure you set the
environment from APPSORA.env before that.
relink done fine. But when i try to run adpatch again, I got this error
STRT_TASK: [AutoPatch startup after aimini] [] [Tue Dec 15 2009 18:06:35]
Connecting to APPS......Connected successfully.
STRT_TASK: [Validate schema passwords] [] [Tue Dec 15 2009 18:06:35]
Connecting to APPLSYS......Connected successfully.
Connecting to APPS......Connected successfully.
STOP_TASK: [Validate schema passwords] [] [Tue Dec 15 2009 18:06:35]
STRT_TASK: [Upload Patch History information from filesystem] [] [Tue Dec 15 2009 18:06:35]
Trying to obtain a lock...
About to attempt instantiating the current-view snapshot: Tue Dec 15 2009 18:06:36
Attempting to instantiate the current-view snapshot...
Was already instantiated. So no instantiation done this time.
Done attempting to instantiate the current-view snapshot: Tue Dec 15 2009 18:06:36
STOP_TASK: [Upload Patch History information from filesystem] [] [Wed Dec 16 2009 00:00:33]
Already asked for the name of the patch directory.
(The answer was: /d02/patches/6502082)
STOP_TASK: [AutoPatch startup after aimini] [] [Wed Dec 16 2009 00:00:33]
Already asked for the name of the patch driver file.
(The answer was: /d02/patches/6502082/u6502082.drv)
STRT_TASK: [Run a single patch driver file] [] [Wed Dec 16 2009 00:00:33]
STRT_TASK: [Steps before copy portion] [] [Wed Dec 16 2009 00:00:33]
STRT_TASK: [Initial driver processing steps] [] [Wed Dec 16 2009 00:00:33]
STOP_TASK: [Initial driver processing steps] [] [Wed Dec 16 2009 00:00:33]
STRT_TASK: [Get Oracle Applications Release and read driver file] [] [Wed Dec 16 2009 00:00:33]
STRT_TASK: [driver and release logic for restart] [] [Wed Dec 16 2009 00:00:33]
STRT_TASK: [Read release list save file] [] [Wed Dec 16 2009 00:00:33]
Reading release list save file...
Done reading release list save file
STOP_TASK: [Read release list save file] [] [Wed Dec 16 2009 00:00:33]
STOP_TASK: [driver and release logic for restart] [] [Wed Dec 16 2009 00:00:33]
STOP_TASK: [Get Oracle Applications Release and read driver file] [] [Wed Dec 16 2009 00:00:33]
STRT_TASK: [Prereq checking logic] [] [Wed Dec 16 2009 00:00:33]
AutoPatch error:
Error while executing statement
AutoPatch error:
ORA-06550: line 3, column 10:
PLS-00302: component 'IS_PATCH_APPLIED2' must be declared
ORA-06550: line 3, column 1:
PL/SQL: Statement ignored
AutoPatch error:
adppdepIsPatchApplied() returned FALSE
Please help me on this.
Thanks
sva -
ORA-00604: error occured at recursive SQL level 1 ORA-12705: Cannot access
Oracle Database 10g Express Edition Release 10.2.0.1.0 on
OS Linux Debian 3.1_r4_stable
SQL> select userenv('LANGUAGE') from dual;
USERENV('LANGUAGE')
RUSSIAN_RUSSIA.AL32UTF8
Client OS MS Vista Ultimate EN , region=RUSSIAN.RUSSIA
Oracle Developer suite 10
SQL-Developer
Version 1.1.0.23.
NLS_LANG=RUSSIAN_RUSSIA.CL8MSWIN1251
Oracle Developer suite 10 is working properly but when
i am attempting a connection between Oracle 10g XE and SQL-Developer.
Need some help to resolve this error message....
ORA-00604: error occured at recursive SQL level 1 ORA-12705: Cannot access NLS data files or invalid enviroment specifiedHi,
You have to set NLS_LANG before connect to Oracle Database.
$export NLS_LANG=.AL32UTF8 -
Sysprep - Fatal error occurred while trying to sysprep the machine
On the 4th attempt to sysprep a Windows 7 Enterprise system, I get the dreaded, 'A fatal error occurred while trying to sysprep the machine.'
The setuperr.log shows:
2010-08-04 13:57:58, Error [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 31
2010-08-04 13:57:58, Error [0x0f00ae] SYSPRP WinMain:Hit failure while processing sysprep cleanup external providers; hr = 0x8007001f
I've seen articles referring to the Windows Software Licensing Rearm program may have issues running more than three times in a single Windows image and to add <SkipRearm>1</SkipRearm> in the /unattend file... but this did not help.
The Windows Media Player Network Sharing Service has also been disabled which is often referred to in other posts.
The KB article: http://support.microsoft.com/kb/947212/en-us indicated that the resolution is to re-create the image for the machine... This is very frustrating. I'm hoping that there is
a better resolution???
How do you sysprep a machine more than three times to avoid this error?
Thanks!!
930193I had a problem Where Runing slmgr /dlv returned 0 and could not sysprep a
32 bit Win 7 Installed on C:drive
Here is what I did to succeed whit Sysprep.
Disable UAC
Based on
This :
open notepad and copy paste the following:
@ECHO OFF
setLocal Enabledelayedexpansion
for %%d in (c d e f g h i j k l m n o p q r s t u v w x y z) do (
if exist %%d:\windows\system32 (
SET drv1=%%d:\windows\system32
reg load HKLM\MY_SYSTEM !drv1!
reg delete HKLM\MY_SYSTEM\WPA /f
reg unload HKLM\MY_SYSTEM
GOTO END
:END
ECHO Done, Rebooting system...
timeout 3
wpeutil reboot
Then in notepad chose file>save as, in File Type select "All Files", name it "c:\reset.bat"
Reboot Your Pc, after bios screen press F8, Select "Repair Your Computer", select your keyboard layout, enter your credentials if needed,
then select the last option "Open Command Prompt"
type "c:\reset.bat" or "d:\reset.bat" (Sometimes Your Windows Partition get a different letter on the repair environment)
Back on Windows follow step five if needed.
Check under slmgr /dlv you have more than 0 under "Remaining Windows Rearm count"
Download pstools.zip from
here, extract content an copy psexec.exe to %windir%\System32
run psexec.exe and accept the license agreement so it won't bother when running afterwards, close it.
open notepad and copy paste the following:
@ECHO OFF
echo Stopping Windows Media Player Sharing Service..
echo.
net stop wmpnetworksvc
echo.
echo Deleting Old Sysprep Logs...
echo.
del /f /s /q %windir%\System32\sysprep\panther\*.*
echo.
echo Adding Required Sysprep Registry Keys...
echo.
REG ADD "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SoftwareProtectionPlatform" /v SkipRearm /t REG_DWORD /d 00000001 /f
REG ADD HKLM\SYSTEM\Setup\Status\SysprepStatus /v GeneralizationState /t REG_DWORD /d 00000007 /f
REG ADD HKLM\SYSTEM\Setup\Status\SysprepStatus /v CleanupState /t REG_DWORD /d 00000002 /f
psexec -i -s REG ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Cleanup /v "{EC9FE15D-99DD-4FB9-90D5-5B56E42A0F80}" /t REG_SZ /d "C:\\Windows\\System32\\iesysprep.dll,Sysprep_Cleanup_IE" /f
psexec -i -s REG ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Generalize /v "{EC9FE15D-99DD-4FB9-90D5-CE53C91AB9A1}" /t REG_SZ /d "C:\\Windows\\System32\\iesysprep.dll,Sysprep_Cleanup_IE" /f
psexec -i -s REG ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Specialize /v "{EC9FE15D-99DD-4FB9-90D5-676C338DC1DA}" /t REG_SZ /d "C:\\Windows\\System32\\iesysprep.dll,Sysprep_Cleanup_IE" /f
echo.
echo Uninstalling MSDTC...
echo.
msdtc -uninstall
timeout 10
echo.
echo Reinstalling MSDTC...
echo.
msdtc -install
timeout 10
echo.
echo Cross Your Fingers, Finally Running Sysprep...
echo.
%windir%\System32\sysprep\sysprep /generalize /oobe /shutdown /unattend:unattend.xml
Change Last Line to suit your needs, ie: if you are not using an unnattend answer file, then delete /unattend:unattend.xml"
Then in notepad chose file>save as, in File Type select "All Files", name it "%windir%\System32\do.cmd"
if you use an unattend.xml file copy it to %windir%\System32\sysprep folder.
Once you are ready run %windir%\System32\do.cmd
Hope it helps, -
I am installing R12 on Oracle Enterprise Linux and gettiing above errors.
++++++++ Platform++++++
(I) OS: OEL 4 64-bit update 7 ( installed from DVD if that matters)
[root@arun2 vmware]# uname -a
Linux arun2.devar.com 2.6.9-78.0.0.0.1.ELsmp #1 SMP Fri Jul 25 16:04:35 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux
[root@arun2 vmware]# more /etc/redhat-release
Enterprise Linux Enterprise Linux AS release 4 (October Update 7)
(II) Apps: R12 64-bit (latest available on web released on Jan 13, 2009)
[root@arun2 rapidwiz]# ./RapidWizVersion
Oracle Applications Rapid Install Wizard
Version 12.0.4.6
(c) Copyright 2000-2006 Oracle Corporation. All rights reserved.
(III)H/W: Dell(insiron 530) Intel quad core with 6GB RAM 1TB disk
+++++++ rapidwiz+++++
1) Downloaded x86-64bit ebusiness suit from oracle site
2) unzipped all packages
3) installed recommend Linux rpms
[root@arun2 vmware]# more /tmp/orarpm.2.sh
rpm -Uvh binutils-2.15.92.0.2-25.x86_64.rpm
rpm -Uvh compat-db-4.1.25-9.i386.rpm
rpm -Uvh compat-db-4.1.25-9.x86_64.rpm
rpm -Uvh control-center-2.8.0-12.rhel4.5.x86_64.rpm
rpm -Uvh gcc-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh gcc-c++-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh glibc-2.3.4-2.41.i686.rpm
rpm -Uvh glibc-2.3.4-2.41.x86_64.rpm
rpm -Uvh glibc-devel-2.3.4-2.41.i386.rpm
rpm -Uvh glibc-devel-2.3.4-2.41.x86_64.rpm
rpm -Uvh glibc-common-2.3.4-2.41.x86_64.rpm
rpm -Uvh gnome-libs-1.4.1.2.90-44.2.x86_64.rpm
rpm -Uvh libstdc++-3.4.6-10.0.1.i386.rpm
rpm -Uvh libstdc++-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh libstdc++-devel-3.4.6-10.0.1.i386.rpm
rpm -Uvh libstdc++-devel-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh libgcc-3.4.6-10.0.1.i386.rpm
rpm -Uvh libgcc-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh make-3.80-7.EL4.x86_64.rpm
rpm -Uvh pdksh-5.2.14-30.6.x86_64.rpm
rpm -Uvh setarch-1.6-1.x86_64.rpm
rpm -Uvh sysstat-5.0.5-19.el4.x86_64.rpm
rpm -Uvh xscreensaver-4.18-5.rhel4.14.0.1.x86_64.rpm
rpm -Uvh openmotif21-2.1.30-11.0.1.RHEL4.6.i386.rpm
rpm -Uvh libaio-0.3.105-2.x86_64.rpm
rpm -Uvh libaio-0.3.105-2.i386.rpm
rpm -Uvh libaio-devel-0.3.105-2.x86_64.rpm
Note: some of them were already applied.
4) Changed /etc/sysctl.conf
kernel.shmmax=3221225472
net.ipv4.ip_local_port_range = 2024 65000
kernel.semmsl=256
kernel.semmns=32000
kernel.semopm=100
kernel.semmni=142
kernel.shmall=2097152
kernel.shmmni=4096
kernel.msgmax=8192
kernel.msgmnb=65535
kernel.msgmni=2878
fs.file-max=65536
net.core.rmem_default=262144
net.core.rmem_max=262144
net.core.wmem_default=262144
net.core.wmem_max=262144
Note: rebooted the server couple of times
5) /etc/hosts entry
[root@arun2 vmware]# more /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
192.168.2.5 arun2.devar.com arun2
6) openmotif:
[root@arun2 vmware]# rpm -qa| grep openm
openmotif-2.2.3-10.2.el4
openmotif-devel-2.2.3-10.2.el4
openmpi-libs-1.2.5-5.el4
openmotif-2.2.3-10.2.el4
openmotif21-2.1.30-11.0.1.RHEL4.6
7) added couple of params to /etc/resolv.conf
options attempts:5
options timeout:15
8) Another hostname file
[root@arun2 rapidwiz]# more /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=arun2.devar.com
9) there is no file called /etc/sysconfig/networking/profiles/default/network
[root@arun2 rapidwiz]# ls -l /etc/sysconfig/networking/profiles/default/network
ls: /etc/sysconfig/networking/profiles/default/network: No such file or directory
10) soft and all in /etc/security/limits.conf
# Added for Oracle
hard nofile 65535
soft nofile 4096
hard nproc 16384
soft nproc 2047
11) It fails at 33% of steps 2
12) I find most binaries are crashing. ldd command on binary doesn't show anything is missing.
13) file on libraries looks like this
[oracle6@arun2 ~]$ file /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libsqlplus.so /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libclntsh.so.10.1
/d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libsqlplus.so: ELF 64-bit LSB shared object, AMD x86-64, version 1 (SYSV), not stripped
/d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libclntsh.so.10.1: ELF 64-bit LSB shared object, AMD x86-64, version 1 (SYSV), not stripped
It become challenging and frustrating for me. I am really exhausted. Any help would be greately appreciated.
Regards
-Arun
PS: snip of log file:
(a)
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for MARS6 instance
ADX Database Utility
(b) tail -30
/d01/oracle6/MARS6/db/tech_st/10.2.0/appsutil/log/MARS6_arun2/ApplyDatabase_02021441.log
Executable : /d01/oracle6/MARS6/db/tech_st/10.2.0/bin/sqlplus
The log information will be written to
/d01/oracle6/MARS6/db/tech_st/10.2.0/appsutil/log/MARS6_arun2/adcrdb_MARS6.txt
Creating the control file for MARS6_arun2 database ...
exit_code=139
Checking for errors ...
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : arun2
sDbDomain : devar.com
sDbPort : 1537
sDbSid : MARS6
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@arun2.devar.com:1537:MARS6
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1537))(CONNECT_DATA=(SERVICE_NAME=MARS6)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1537))(CONNECT_DATA=(SERVICE_NAME=MARS6.devar.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabaseThanks, appreciate your reply. As I mentioned earlier, binaries are crashing. (side note: I am on 10th attempt, so SID=MARS10)
1) There is a connection issue, not sure why.
2) I see, something cored. .... adcrdb.sh: line 107: 30881 Segmentation fault sqlplus /nolog......(full text below)
3) ldd on sqlplus in case required
[oracle6@arun2 bin]$ ldd sqlplus
libsqlplus.so => /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libsqlplus.so (0x0000002a95557000)
libclntsh.so.10.1 => /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libclntsh.so.10.1 (0x0000002a9574a000)
libnnz10.so => /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libnnz10.so (0x0000002a96ae6000)
libdl.so.2 => /lib64/libdl.so.2 (0x00000039f7200000)
libm.so.6 => /lib64/tls/libm.so.6 (0x00000039f7000000)
libpthread.so.0 => /lib64/tls/libpthread.so.0 (0x00000039f7a00000)
libnsl.so.1 => /lib64/libnsl.so.1 (0x00000039feb00000)
libc.so.6 => /lib64/tls/libc.so.6 (0x00000039f6d00000)
/lib64/ld-linux-x86-64.so.2 (0x00000039f6b00000)
4) last part of $ORACLE_HOME/appsutil/log/MARS10_arun2/ApplyDatabase_02061554.log
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : arun2
sDbDomain : devar.com
sDbPort : 1541
sDbSid : MARS10
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@arun2.devar.com:1541:MARS10
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1541))(CONNECT_DATA=(SERVICE_NAME=MARS10)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1541))(CONNECT_DATA=(SERVICE_NAME=MARS10.devar.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Fri Feb 6 15:54:57 EST 2009
The environment settings are as follows ...
ORACLE_HOME : /d01/oracle6/MARS10/db/tech_st/10.2.0
ORACLE_SID : MARS10
TWO_TASK :
PATH : /d01/oracle6/MARS10/db/tech_st/10.2.0/perl/bin:/d01/oracle6/MARS10/db/tech_st/10.2.0/bin:/usr/bin:/usr/sbin:/d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/usr/bin:/softwares/appsr12/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /d01/oracle6/MARS10/db/tech_st/10.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/oracle6/MARS10/db/tech_st/10.2.0/lib:/usr/dt/lib:/d01/oracle6/MARS10/db/tech_st/10.2.0/ctx/lib
Executable : /d01/oracle6/MARS10/db/tech_st/10.2.0/bin/sqlplus
The log information will be written to
/d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/log/MARS10_arun2/adcrdb_MARS10.txt
Creating the control file for MARS10_arun2 database ...
exit_code=139
Checking for errors ...
.end std out.
/d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/install/MARS10_arun2/adcrdb.sh: line 107: 30881 Segmentation fault sqlplus /nolog @/d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/install/MARS10_arun2/adcrdbclone.sql "so" "$S_RDBMS_VERS"
egrep: /d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/log/MARS10_arun2/adcrdb_MARS10.txt: No such file or directory
.end err out.
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase -
I receive the following error when trying to start up managed web logic. I am signed in as root. I did the install of the soa suite as a different user but configured it as root after the install was completed.
Thanks
Start command
[root@localhost bin]# ./startManagedWebLogic.sh AdminServer http://localhost:7020
This was in my AdminServer-diagnostic.log
[2011-03-30T14:07:23.803-04:00] [AdminServer] [ERROR] [] [oracle.bpm.services.organization] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@1483387e] [userId: <anonymous>] [ecid: 11d1def534ea1be0:-1e9b9ccb:12f07f146c8:-8000-0000000000000002,0] [APP: soa-infra] Exception[[
exception.70692.type: error
exception.70692.severity: 2
exception.70692.name: Error while granting BPMOrganizationAdmin role to SOAOperator.
exception.70692.description: Error occured while granting the application role BPMOrganizationAdmin to application role SOAOperator.
exception.70692.fix: In the policy store, please add SOAOperator role as a member of BPMOrganizationAdmin role, if it is not already present.
ORABPEL-10585
Service error.
Internal Error; Service error occurs in JpsProvider in method getIdentityStore().
Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services
at oracle.tip.pc.services.identity.jps.JpsProvider.getIdentityStore(JpsProvider.java:362)
at oracle.tip.pc.services.identity.jps.JpsProvider.init(JpsProvider.java:335)
at oracle.tip.pc.services.identity.jps.JpsProvider.<init>(JpsProvider.java:299)
at oracle.tip.pc.services.identity.jps.JpsProvider.getInstance(JpsProvider.java:311)
at oracle.bpm.bpmn.engine.runtime.DeploymentDescriptorUtil.grantBPMOrganizationAdminRoleToSOAOperator(DeploymentDescriptorUtil.java:292)
at oracle.bpm.bpmn.engine.service.BPMNServiceEngine.stateChanged(BPMNServiceEngine.java:578)
at oracle.integration.platform.blocks.mesh.FabricLifecycle.notifyListeners(FabricLifecycle.java:46)
at oracle.integration.platform.blocks.mesh.FabricLifecycle.setState(FabricLifecycle.java:30)
at oracle.integration.platform.blocks.mesh.MeshImpl.postDeployInit(MeshImpl.java:119)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:71)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy296.postDeployInit(Unknown Source)
at oracle.integration.platform.kernel.FabricKernelInitializerServlet$1.run(FabricKernelInitializerServlet.java:555)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: oracle.security.jps.service.idstore.IdentityStoreException: JPS-01520: Cannot initialize identity store.
at oracle.security.jps.internal.idstore.util.IdentityStoreUtil.getIdentityStoreFactory(IdentityStoreUtil.java:168)
at oracle.security.jps.internal.idstore.AbstractIdmIdentityStore.getIdmFactory(AbstractIdmIdentityStore.java:174)
at oracle.security.jps.internal.idstore.AbstractIdmIdentityStore.initStore(AbstractIdmIdentityStore.java:124)
at oracle.security.jps.internal.idstore.AbstractIdmIdentityStore.getIdmStore(AbstractIdmIdentityStore.java:110)
at oracle.tip.pc.services.identity.jps.JpsProvider.getIdentityStore(JpsProvider.java:360)
at oracle.tip.pc.services.identity.jps.JpsProvider.init(JpsProvider.java:335)
at oracle.tip.pc.services.identity.jps.JpsProvider.<init>(JpsProvider.java:300)
... 21 moreI reinstalled the following on a fresh Linux 5 VM
Oracle XE - as root as specified in the documentation
RCU - as non-root user
WLS - as non-root user (Install complete and verified via console http://localhost:7001/console/)
SOA-Sute installed and configured as non-root user
I receive a 404 when trying to get to http://localhost:7001/console/ after running ./startManagedWebLogic.sh AdminServer http://localhost:7020
I see this in my domain AdminServer.log and I am still seeing the ORABPEL-10585 as shown in the earlier post
javax.naming.NameNotFoundException: While trying to look up comp/env/jmx/domainRuntime in /app/webapp/dms.war/345498465.; remaining name 'comp/env/jmx/domainRuntime'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
at weblogic.jndi.internal.ApplicationNamingNode.lookup(ApplicationNamingNode.java:144)
at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:411)
at weblogic.jndi.factories.java.ReadOnlyContextWrapper.lookup(ReadOnlyContextWrapper.java:45)
at weblogic.jndi.internal.AbstractURLContext.lookup(AbstractURLContext.java:130)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at oracle.dms.app.BaseInitializer._findWebLogicRuntimeMBeanServer(BaseInitializer.java:598)
at oracle.dms.app.BaseInitializer.getInitializer(BaseInitializer.java:225)
at oracle.dms.app.DmsSpy.init(DmsSpy.java:210)
at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1985)
at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1959)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:43)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176) -
Error occur while protecting the document using RMS sharing application
The set-up in which the error occurs has the following details,
Server name : hcdc1.ad.com
RMS SCP : adrms.ad.com
http:// adrms.ad.com /_wmcs/licensing/license.asmx
http:// adrms.ad.com /_wmcs/certification/certification.asmx
Unable to protect the document and error as "An internall error occured error code 0X8007054F"Hi,
What Office Suite version you use? If Office 2010, I suggest you uninstall RMS Sharing App and install it once again using following command:
setup.exe /s /configureO2010Admin
After that, run one of the following commands, depending on you operating system:
For Windows 8 and Windows 8.1, 64-bit: x64\aadrmprep.exe /configureO2010 ; 32-bit: X86\aadrmprep.exe /configureO2010
For Windows 7, 64-bit: x64\win7\aadrmpep.exe /configureO2010
Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer. -
There is an error occured while installing cs6 trial on windows 8
There is an error occured while installing cs6 trial on windows 8
Please check the install logs
http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html -
A fatal error occurred preventing product use, LaserJet Pro 200 color MFP M276nw
When trying to install the full printer software suite, as soon as I click the button to install after the .exe is extracted, I get an alert window with, "A fatal error occurred preventing product use." No error code, just an option to close the dialog. I have read all the related support topics and similar threads and tried all the solutions to no avail. Pasted below is the detailed error log. Any help at all would be much appreciated, Happy New Year!
Version=1
EventType=CLR20r3
EventTime=130330861946634368
ReportType=2
Consent=1
UploadTime=130330861947102369
ReportIdentifier=b741489f-732d-11e3-ad06-78e7d1894a6a
WOW64=1
Response.BucketId=3240107344
Response.BucketTable=5
Response.type=4
Sig[0].Name=Problem Signature 01
Sig[0].Value=hpbcsiinstaller.exe
Sig[1].Name=Problem Signature 02
Sig[1].Value=5.0.3.8039
Sig[2].Name=Problem Signature 03
Sig[2].Value=4fe20fe8
Sig[3].Name=Problem Signature 04
Sig[3].Value=hpbcsiInstaller
Sig[4].Name=Problem Signature 05
Sig[4].Value=5.0.3.8039
Sig[5].Name=Problem Signature 06
Sig[5].Value=4fe20fe8
Sig[6].Name=Problem Signature 07
Sig[6].Value=e
Sig[7].Name=Problem Signature 08
Sig[7].Value=1e
Sig[8].Name=Problem Signature 09
Sig[8].Value=System.TypeInitialization
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7601.2.1.0.768.3
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
UI[2]=C:\HP_LaserJet_200_color_MFP_M276\Installer\hpbcsiInstaller.exe
UI[3]=HP Installer has stopped working
UI[4]=Windows can check online for a solution to the problem.
UI[5]=Check online for a solution and close the program
UI[6]=Check online for a solution later and close the program
UI[7]=Close the program
LoadedModule[0]=C:\HP_LaserJet_200_color_MFP_M276\Installer\hpbcsiInstaller.exe
LoadedModule[1]=C:\Windows\SysWOW64\ntdll.dll
LoadedModule[2]=C:\Windows\SYSTEM32\MSCOREE.DLL
LoadedModule[3]=C:\Windows\syswow64\KERNEL32.dll
LoadedModule[4]=C:\Windows\syswow64\KERNELBASE.dll
LoadedModule[5]=C:\Windows\system32\apphelp.dll
LoadedModule[6]=C:\Windows\AppPatch\AcLayers.DLL
LoadedModule[7]=C:\Windows\syswow64\SspiCli.dll
LoadedModule[8]=C:\Windows\syswow64\msvcrt.dll
LoadedModule[9]=C:\Windows\syswow64\RPCRT4.dll
LoadedModule[10]=C:\Windows\syswow64\CRYPTBASE.dll
LoadedModule[11]=C:\Windows\SysWOW64\sechost.dll
LoadedModule[12]=C:\Windows\syswow64\USER32.dll
LoadedModule[13]=C:\Windows\syswow64\GDI32.dll
LoadedModule[14]=C:\Windows\syswow64\LPK.dll
LoadedModule[15]=C:\Windows\syswow64\USP10.dll
LoadedModule[16]=C:\Windows\syswow64\ADVAPI32.dll
LoadedModule[17]=C:\Windows\syswow64\SHELL32.dll
LoadedModule[18]=C:\Windows\syswow64\SHLWAPI.dll
LoadedModule[19]=C:\Windows\syswow64\ole32.dll
LoadedModule[20]=C:\Windows\syswow64\OLEAUT32.dll
LoadedModule[21]=C:\Windows\system32\USERENV.dll
LoadedModule[22]=C:\Windows\system32\profapi.dll
LoadedModule[23]=C:\Windows\system32\WINSPOOL.DRV
LoadedModule[24]=C:\Windows\system32\MPR.dll
LoadedModule[25]=C:\Windows\system32\IMM32.DLL
LoadedModule[26]=C:\Windows\syswow64\MSCTF.dll
LoadedModule[27]=C:\Windows\Microsoft.NET\Framework\v4.0.30319\mscoreei.dll
LoadedModule[28]=C:\Windows\Microsoft.NET\Framework\v2.0.50727\mscorwks.dll
LoadedModule[29]=C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_none_d09154e044272b9a\MSVCR80.dll
LoadedModule[30]=C:\Windows\assembly\NativeImages_v2.0.50727_32\mscorlib\9a6c1b7af18b4d5a91dc7f8d6617522f\mscorlib.ni.dll
LoadedModule[31]=C:\Windows\Microsoft.NET\Framework\v2.0.50727\mscorsec.dll
LoadedModule[32]=C:\Windows\syswow64\WINTRUST.dll
LoadedModule[33]=C:\Windows\syswow64\CRYPT32.dll
LoadedModule[34]=C:\Windows\syswow64\MSASN1.dll
LoadedModule[35]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.18201_none_ec80f00e8593ece5\COMCTL32.dll
LoadedModule[36]=C:\Windows\system32\CRYPTSP.dll
LoadedModule[37]=C:\Windows\system32\rsaenh.dll
LoadedModule[38]=C:\Windows\syswow64\imagehlp.dll
LoadedModule[39]=C:\Windows\system32\ncrypt.dll
LoadedModule[40]=C:\Windows\system32\bcrypt.dll
LoadedModule[41]=C:\Windows\SysWOW64\bcryptprimitives.dll
LoadedModule[42]=C:\Windows\system32\GPAPI.dll
LoadedModule[43]=C:\Windows\system32\cryptnet.dll
LoadedModule[44]=C:\Windows\syswow64\WLDAP32.dll
LoadedModule[45]=C:\Windows\system32\SensApi.dll
LoadedModule[46]=C:\Windows\system32\uxtheme.dll
LoadedModule[47]=C:\Windows\Microsoft.NET\Framework\v2.0.50727\mscorjit.dll
LoadedModule[48]=C:\Windows\system32\RpcRtRemote.dll
LoadedModule[49]=C:\HP_LaserJet_200_color_MFP_M276\Installer\hpbcsiCommonTools.dll
LoadedModule[50]=C:\HP_LaserJet_200_color_MFP_M276\Installer\NLog.dll
LoadedModule[51]=C:\Windows\system32\VERSION.dll
LoadedModule[52]=C:\Windows\assembly\NativeImages_v2.0.50727_32\System\5d22a30e587e2cac106b81fb351e7c08\System.ni.dll
LoadedModule[53]=C:\Windows\assembly\NativeImages_v2.0.50727_32\System.Configuration\29f3ae8d313e62b4daed1107ccd29f9f\System.Configuration.ni.dll
LoadedModule[54]=C:\Windows\assembly\NativeImages_v2.0.50727_32\System.Xml\a9852a75edb6ed7cd5271b05519f5b56\System.Xml.ni.dll
LoadedModule[55]=C:\Windows\assembly\NativeImages_v2.0.50727_32\System.Drawing\5aa44bce7933e4de09d935848f868a4b\System.Drawing.ni.dll
LoadedModule[56]=C:\Windows\assembly\NativeImages_v2.0.50727_32\System.Windows.Forms\ef0a534be135cd8f0d99d938d8b1814a\System.Windows.Forms.ni.dll
LoadedModule[57]=C:\Windows\assembly\NativeImages_v2.0.50727_32\System.Data\764054efc88f51b54c8d7e44df26b671\System.Data.ni.dll
LoadedModule[58]=C:\Windows\assembly\GAC_32\System.Data\2.0.0.0__b77a5c561934e089\System.Data.dll
LoadedModule[59]=C:\Windows\syswow64\WS2_32.dll
LoadedModule[60]=C:\Windows\syswow64\NSI.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped working
ConsentKey=CLR20r3
AppName=HP Installer
AppPath=C:\HP_LaserJet_200_color_MFP_M276\Installer\hpbcsiInstaller.exe
ReportDescription=Stopped workingDid you try to uninstall every .NET and then try again? Follow this guide:
http://knowledge.autodesk.com/support/autocad/troubleshooting/caas/sfdcarticles/sfdcarticles/How-to-... -
RC-00118: Error occurred during creation of database Raised by oracle.apps.
Hi Experts,
Please note i am doing the clonning from production to test server.
Production Server -
1. Run the adpreclone.pl on the apps & db tier.
2. run the autoconfig on the apps and db tier.
3. shut down the production instance.
4. Moved the files and started the clonning process on the db tier i am getting the below issue.
My current E-Business Suit Version is R12.0.4 Database Version is 10.2.0.3. Operating system is SUN SPARC 64 BIT SUN SOLARIS 10.
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : proddb
sDbDomain : clientdomain
sDbPort : 1530
sDbSid : TEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@proddb.clientdomain:1530:TEST
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Wed Mar 21 18:09:54 WAT 2012
The environment settings are as follows ...
ORACLE_HOME : /erptestdata2/u01/d01/tech_st/10.2.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /erptestdata2/u01/d01/tech_st/10.2.0/perl/bin:/erptestdata2/u01/d01/tech_st/10.2.0/bin:/usr/ccs/bin:/usr/sbin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/jre/bin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/usr/sbin:/usr/bin:/opt/EMCpower/bin:/etc/emc/bin:/etc:/usr/ccs/bin:/usr/openwin/bin:/usr/dt/bin:/usr/platform/SUNW,SPARC-Enterprise/sbin:/opt/sun/bin:/opt/SUNWexplo/bin:/opt/SUNWsneep/bin
LD_LIBRARY_PATH : /erptestdata2/u01/d01/tech_st/10.2.0/lib:/usr/dt/lib:/usr/openwin/lib:/erptestdata2/u01/d01/tech_st/10.2.0/ctx/lib:/erptestdata2/u01/d01/tech_st/10.2.0/lib32
Executable : /erptestdata2/u01/d01/tech_st/10.2.0/bin/sqlplus
The log information will be written to
/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/log/TEST_proddb/adcrdb_TEST.txt
Creating the control file for TEST_proddb database ...
SQL*Plus: Release 10.2.0.3.0 - Production on Wed Mar 21 18:09:54 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 2035496 bytes
Variable Size 432017624 bytes
Database Buffers 624951296 bytes
Redo Buffers 14737408 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01167: two files are the same file/group number or the same file
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/olap.dbf'
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/odm.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp03.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp04.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp10a5.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.clientdomain"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 2035496 bytes
Variable Size 432017624 bytes
Database Buffers 624951296 bytes
Redo Buffers 14737408 bytes
ORA-00205: error in identifying control file, check alert log for more info
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-00210: cannot open the specified control file
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4168
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 2035496 bytes
Variable Size 432017624 bytes
Database Buffers 624951296 bytes
Redo Buffers 14737408 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01167: two files are the same file/group number or the same file
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/olap.dbf'
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/odm.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp03.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp04.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp10a5.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.clientdomain"
ERROR at line 1:
ORA-01109: database not open
Error Running create/replace library with adupdlib.sql
ORA-01109: database not open
PL/SQL procedure successfully completed.
File created.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
exit_code=0
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 10.2.0.3.0 - Production on Wed Mar 21 18:10:16 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : proddb
sDbDomain : clientdomain
sDbPort : 1530
sDbSid : TEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@proddb.clientdomain:1530:TEST
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
Please advise ASAP.
Regards
Mohammed.Nikki,
Check alert<SID>.log file for more details about the error.
It looks like that the source database was not cleanly shutdown before copying the files to the target node. Please do the following and check then:
SQL> connect / as sysdba
SQL> startup mount;
SQL> recover database using backup controlfile until cancel;
-- type CANCEL
SQL> alter database open resetlogs; If the above does not help, then shutdown the source database normally (make sure it is down), re-copy the files and start the cloning process again. -
AAMEE 3.1.105.0 generated packages run fine when pushed to Macs that do not have an existing previous version of CS.
However, if pushed to a Mac that has CS4 installed, CS6 installs but Acrobat Pro X will not launch ("Internal error occurred").
We are using the latest Adobe CS6 Design & Web Premium installer DMGs from licensing.adobe.com and we are following the standard workflow.
I know Adobe's position is "We don't recommend or support concurrent installs of Creative Suite" (I get that).
Since OS X lacks package management (ala Yum, RPM, etc.), the term "Uninstall" is vague, but we appreciate Adobe's "cleaner tool".
Unfortunately the "cleaner tool" is only marginally effective, it leaves a mess behind.
And...when "cleaner tool" is used to remove CS4, it whacks CS6.
Wait...it gets worse...when "cleaner tool" is used, we now can't push our CS6 package to the Mac...we get...<drumroll>..."Internal error occurred" when launching Acrobat Pro X.
Someone shoot me...please put me out of my misery.
Why can't deploying CS6 be as simple as...
http://www.toysrus.com/product/index.jsp?productId=3938350&CAWELAID=479925582
DonOK, we resolved the issue. Apparently there was a ~/Library/ColorSync folder present, not owned by the logged in user, and the logged in user had no access. Given OS X's domain model, it looks like Acrobat Pro X looks at that folder when it launches, even though it doesn't need to, and it can't get into it, so it tosses up the error.
Removing the folder (since it's not needed) resolves the issue. If the folder was needed, we would change ownership and permissions so Acrobat Pro X could access it.
Problem solved.
Thanks,
Don -
Error occurred during initialization of VM, could not reserve space in heap
I installed the SOA suite+ BPM 11.1.1.3.0, ESB 11.1.1.3.0 successfully along with RCU schema in oracle DB Ex edition 11 G successfully. I have 2 GB Ram in my system. I am facing the below error during the startup of weblogic instance which is having these all ESB, BPM properties.
it seems that 2 GB ram is occupying by the SOA suite.
CAN ANY ONE SUGGEST TO REDUCE THE SOA SUITE RAM CAPACITY.
USER_MEM_ARGS=-Xms512m -Xmx1024m -XX:PermSize=128m -XX:MaxPermSize=512m
JAVA_OPTIONS= -Xverify:none
** End SOA Specific environment setup for win.
** SOA specific environment is already set. Skipping ...
JAVA Memory arguments: -Xms512m -Xmx1024m -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar;C:\Oracle\Middleware\Oracle_SOA1\soa\modules\user-patch.jar;C:\Oracle\Middleware\Oracle_SOA1\soa\modules\soa-startup.jar;;C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sys_
Error occurred during initialization of VM
Could not reserve enough space for object heap
Regards
Raghu VeerHello Raghu,
As James indicated it is problem with the system configuration but still you may try below once -
Go to $Domain_Home/bin and edit the setSOADomainEnv.cmd (or setSOADomainEnv.sh) to change below setting -
set DEFAULT_MEM_ARGS=-Xms512m -Xmx512m
If you are using AMD processor then modify below instead of DEFAULT_MEM_ARGS -
set PORT_MEM_ARGS=-Xms768m -Xmx768m
Save and exit.
Now start Admin server and after that SOA server and OSB server. As James suggested, for better performance you may keep either of SOA and OSB server up as and when required and keep other one down.
I am still using a 2GB machine for 11g suite and I work easily because generally I work with one of SOA or OSB server and whenever I use any IDE like JDev or OEPE, I keep all servers down. For better performance and memory utilization you may use Oracle XE database.
Hope it helps.
Regards,
Anuj -
Error installing E-Bussiness Suite (EBS) R12 on Windows 2003 Server x32
I am trying to install EBS R12 and i am getting error at stage 3 of 5 on 53%
I followed steps from below link
http://supportuae.wordpress.com/2013/01/26/installing-oracle-e-business-suite-r12-on-microsoft-windows-server-2003/
My Setup
Win 2003 Server SP2 x32 *(Installed in D:\) 20 GB*
MS Visual C++ Express edition *(D:\MSVS)*
Cygwin 1.7 *(D:\cygwin)*
Acive Perl
Oracle Apps Dump at G:\
Installing Oracle Apps at E:\ with 270 GB NTFS
Installed in Administrator Login
Below is my Error log
~~~~~~~~~~~~~
Processing DriverFile = G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adriapps.drv
Running Instantiation Drivers for G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adriapps.drv
instantiate file:
source : G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adrunias.cmd
dest : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
backup : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_ebs\out\templbac\adrunias.cmd
instantiate file:
source : G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adrunat.cmd
dest : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunat.cmd
backup : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunat.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_ebs\out\templbac\adrunat.cmd
Step 0 of 5
Command: E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
Processing Step 3 of 5
Executing: E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM $Header: adrunias.cmd 120.11 2009/01/19 06:29:11 marderiu noship $
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM ###############################################################
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM overwritten. If you were instructed to edit this file, or if you are not
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM able to use the settings created by AutoConfig, refer to Metalink Note
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM 387859.1 for assistance.
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM ###############################################################
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>(set date=Sun 04/21/2013 )
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>(set time=03:12 PM )
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : APPS TECH STACK : Sun 04/21/2013 03:12 PM
STARTED INSTALL PHASE : APPS TECH STACK : Sun 04/21/2013 03:12 PM
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET JRE_PATH=G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET JRE_CP=.;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\java;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET XML_FILE=E:\oracle\VIS\inst\apps\VIS_ebs\appl\admin\VIS_ebs.xml
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET PATH=G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\unzip\NT;D:\Perl\site\bin;D:\Perl\bin;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbem;D:\MSVS\VC\bin;D:\cygwin\bin
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>setlocal enableextensions
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>set /P unpw=""
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>for /F "usebackq tokens=1,2 delims=/" %i in ('APPS/APPS') do set APPSUSER=%i && set APPSPASS=%j
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>set APPSUSER=APPS && set APPSPASS=APPS
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=4 )
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>CD /D D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "FALSE" == "E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd" (if not "FALSE" == "FALSE" (goto :FALSE ) else (goto :runProcess_1 ) )
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "runProcess_1"
"runProcess_1"
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Perform the install for tech stack
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Statusstring Installing Applications Technology Stack
Statusstring Installing Applications Technology Stack
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -mx600M -classpath .;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\java;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.rapidwiz.util.InstantiateFile -e E:\oracle\VIS\inst\apps\VIS_ebs\appl\admin\VIS_ebs.xml -d G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\driver\appsts\driver\gias.drv -pwd no_password_here -log E:\oracle\VIS\apps\apps_st\appl\admin\VIS_ebs\log\ApplyAppsTechStack.log -nthreads 4 -verbose
Enter the location of the CD labeled Oracle Applications Rapid Install - Tools Disk 1 :
Checking Disk contents in - G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz
Checking Disk contents in - G:\Oracle_Apps\StagesR12\oraAS\Disk1
Checking Disk contents in - G:\Oracle_Apps\StagesR12\oraAS\Disk1
Unzip Count:60
Processing Disk1....
Processing Disk2....
Processing Disk3....
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 0 == 0 goto :BITS_OK
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "runProcess_2"
"runProcess_2"
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Perform the registration for tech stack
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Statusstring Registering Applications Technology Stack
Statusstring Registering Applications Technology Stack
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>(echo APPS & echo APPS ) | G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -mx512M -classpath .;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\java;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyAppsTechStack -e E:\oracle\VIS\inst\apps\VIS_ebs\appl\admin\VIS_ebs.xml -stage G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz -showProgress -phase reg -nopromptmsg
Log file located at E:\oracle\VIS\inst\apps\VIS_ebs\admin\log\ApplyAppsTechStack_04211520.log
| 0% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
RC-50013: Fatal: Failed to instantiate driver E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :REG_OK
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Cannot execute registration of Applications Techstack
Cannot execute registration of Applications Techstack
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "" == "TRUE" goto :INSIAS_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running APPL_TOP Install Driver for VIS instance
Please refer to the remaining logs on applications node at - E:\oracle\VIS\inst\apps\VIS_ebs\logs\04211310.log
Processing DriverFile = G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adriapps.drv
Running Instantiation Drivers for G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adriapps.drv
instantiate file:
source : G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adrunias.cmd
dest : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
backup : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_ebs\out\templbac\adrunias.cmd
instantiate file:
source : G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adrunat.cmd
dest : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunat.cmd
backup : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunat.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_ebs\out\templbac\adrunat.cmd
Step 0 of 5
Command: E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
Processing Step 3 of 5
Executing: E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM $Header: adrunias.cmd 120.11 2009/01/19 06:29:11 marderiu noship $
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM ###############################################################
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM overwritten. If you were instructed to edit this file, or if you are not
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM able to use the settings created by AutoConfig, refer to Metalink Note
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM 387859.1 for assistance.
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM ###############################################################
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>(set date=Sun 04/21/2013 )
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>(set time=04:30 PM )
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : APPS TECH STACK : Sun 04/21/2013 04:30 PM
STARTED INSTALL PHASE : APPS TECH STACK : Sun 04/21/2013 04:30 PM
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET JRE_PATH=G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET JRE_CP=.;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\java;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET XML_FILE=E:\oracle\VIS\inst\apps\VIS_ebs\appl\admin\VIS_ebs.xml
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET PATH=G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\unzip\NT;D:\Perl\site\bin;D:\Perl\bin;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbem;D:\MSVS\VC\bin;D:\cygwin\bin
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>setlocal enableextensions
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>set /P unpw=""
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>for /F "usebackq tokens=1,2 delims=/" %i in ('APPS/APPS') do set APPSUSER=%i && set APPSPASS=%j
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>set APPSUSER=APPS && set APPSPASS=APPS
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=4 )
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>CD /D D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd" == "E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd" (if not ""runProcess_2"" == "FALSE" (goto :"runProcess_2" ) else (goto :runProcess_1 ) )
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running APPL_TOP Install Driver for VIS instance
Please refer to the remaining logs on applications node at - E:\oracle\VIS\inst\apps\VIS_ebs\logs\04211310.logwhich version of Oracle R12 ?
these are generic errors, please check log file for details and post here error log
and also ensure that you are following proper guidelines mentioned in MOS note:
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
i am using Oracle E-Business Suite Release 12.1.1 Media Pack for Microsoft Windows (32-bit)
i have already posted complete log from E:\oracle\VIS\inst\apps\VIS_ebs\logs\04211310.log
Can you post link to guidelines mentioned in MOS note:
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1] -
Error during deployment - SOA Suite 11.1.1.4.0
Hi,
When I try to deploy bpel flow in the SOA Suite 11.1.1.4.0 i receive the error below:
The bpel flow deploy and works fine in the SOA Suite 11.1.1.3.0_ (Jdeveloper 11.1.1.3.0)
#;There was an error deploying the composite on AdminServer: Deployment Failed: Error occurred during deployment of component: CllReceiveEmployeeFromPSFTEBS to service engine: implementation.bpel, for composite: cll_ReceiveEmployeeFromPSFT: ORABPEL-05250
#;Error deploying BPEL suitcase.
#;error while attempting to deploy the BPEL component file "/vol02/appsoa/product/11.1.0/user_projects/domains/base_domain/servers/AdminServer/dc/soa_5d9300f2-10a2-4784-8865-83f7159ee9ce"; the exception reported is: java.lang.Exception: BPEL 1.1 compilation failed
#;This error contained an exception thrown by the underlying deployment module.
#;Verify the exception trace in the log (with logging level set to debug mode).
[04:07:33 PM] Check server log for more details.
[04:07:33 PM] Error deploying archive sca_CllReceiveEmployeeFromPSFT_rev1_0.jar to partition "ebs_psft" on server AdminServer [brdell21.br.oracle.com:7001]
[04:07:33 PM] #### Deployment incomplete. ####
[04:07:33 PM] Error deploying archive file:/C:/jdev11g/mywork/EBS-PSFT/CllReceiveEmployeeFromPSFT/deploy/sca_CllReceiveEmployeeFromPSFT_rev1_0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
Regards,
Marcos AllonsoHi,
I copied fle sca_cll_ReceiveEmployeeBankAccountFromPSFT_rev1_0.jar to C:\jdev11g\mywork\EBS-PSFT\CllReceiveEmployeeBankAccountFromPSFT\SCA-INF\lib , redeploy flow but the problem remain.
*** I am using a Jdeveloper 11.1.1.3.0 to deploy flow in the SOA Suite 11.1.1.4.0
Regars,
Marcos -
After login Oracle BPM worklist, error occured as ORABPEL-10585
The enviroment as below: Oracle SOA suite 11g R1 (11.1.1.5.0) , Windows 7 64bit, Oracle XE.
After i deployed auto-created task form to SOA domain, when acess http://localhost:7001/intergration/worklist address, after logged in, error infomation popup.
The error log information:
[2011-11-02T10:50:20.838+08:00] [AdminServer] [TRACE] [] [] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: d11522a6fd21ff39:-1c34818f:133620f6eb1:-8000-000000000000092c,0] [SRC_CLASS: oracle.bpel.services.workflow.client.config.ClientConfigurationUtil] [APP: worklistapp] [SRC_METHOD: getClientConfiguration] WorkflowServiceClientContext: Cannot find client configuration file: wf_client_config.xml
[2011-11-02T10:50:27.803+08:00] [AdminServer] [ERROR] [] [oracle.soa.services.workflow.worklist] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: d11522a6fd21ff39:-1c34818f:133620f6eb1:-8000-000000000000092c,0] [APP: worklistapp] <.> Service error.[[
Internal Error; Service error occurs in IdentityService in method lookupUser.
Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services
ORABPEL-10585
Service error.
Internal Error; Service error occurs in IdentityService in method lookupUser.
Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services
at oracle.bpel.services.identity.client.AbstractIdentityServiceClient.lookupUser(AbstractIdentityServiceClient.java:195)
at oracle.bpel.worklistapp.util.WorklistUtil.getCurrentUser(WorklistUtil.java:548)
at oracle.bpel.worklistapp.tasklist.beans.view.TaskListTaskFlowParams.setTaskFlowParams(TaskListTaskFlowParams.java:363)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(Unknown Source)
at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
at oracle.adf.controller.internal.util.ELInterfaceImpl.invokeMethod(ELInterfaceImpl.java:173)
at oracle.adfinternal.controller.activity.MethodCallActivityLogic.execute(MethodCallActivityLogic.java:162)
at oracle.adfinternal.controller.engine.ControlFlowEngine.executeActivity(ControlFlowEngine.java:993)
at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:879)
at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:778)
at oracle.adfinternal.controller.engine.ControlFlowEngine.invokeTaskFlow(ControlFlowEngine.java:243)
at oracle.adfinternal.controller.state.ChildViewPortContextImpl.invokeTaskFlow(ChildViewPortContextImpl.java:104)
at oracle.adfinternal.controller.state.ControllerState.createChildViewPort(ControllerState.java:1380)
at oracle.adfinternal.controller.ControllerContextImpl.createChildViewPort(ControllerContextImpl.java:78)
at oracle.adf.controller.internal.binding.DCTaskFlowBinding.createRegionViewPortContext(DCTaskFlowBinding.java:440)
at oracle.adf.controller.internal.binding.DCTaskFlowBinding.getViewPort(DCTaskFlowBinding.java:358)
at oracle.adf.controller.internal.binding.TaskFlowRegionModel.doProcessBeginRegion(TaskFlowRegionModel.java:164)
at oracle.adf.controller.internal.binding.TaskFlowRegionModel.processBeginRegion(TaskFlowRegionModel.java:112)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.doRegionRefresh(TaskFlowRegionController.java:241)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:119)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3202)
at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2874)
at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareModel(PageLifecycleImpl.java:115)
at oracle.adf.controller.v2.lifecycle.Lifecycle$2.execute(Lifecycle.java:137)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:197)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.access$400(ADFPhaseListener.java:23)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.startPageLifecycle(ADFPhaseListener.java:238)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$1.after(ADFPhaseListener.java:274)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:75)
at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:53)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:399)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:186)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.bpel.worklistapp.SessionTimeoutFilter.doFilter(SessionTimeoutFilter.java:209)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: oracle.bpel.services.workflow.client.WorkflowServiceClientException: javax.xml.ws.WebServiceException: Could not determine wsdl ports.
at oracle.bpel.services.identity.client.IdentityServiceSOAPClient.invoke(IdentityServiceSOAPClient.java:283)
at oracle.bpel.services.identity.client.IdentityServiceSOAPClient.lookupUser(IdentityServiceSOAPClient.java:350)
at oracle.bpel.services.identity.client.AbstractIdentityServiceClient.lookupUser(AbstractIdentityServiceClient.java:182)
... 94 more
Caused by: javax.xml.ws.WebServiceException: Could not determine wsdl ports.
at oracle.j2ee.ws.common.jaxws.WSDLMetadata.initPorts(WSDLMetadata.java:166)
at oracle.j2ee.ws.common.jaxws.WSDLMetadata.getPort(WSDLMetadata.java:429)
at oracle.j2ee.ws.common.jaxws.ServiceDelegateImpl.createDispatch(ServiceDelegateImpl.java:275)
at oracle.bpel.services.identity.client.IdentityServiceSOAPClient.createDispatch(IdentityServiceSOAPClient.java:228)
at oracle.bpel.services.identity.client.IdentityServiceSOAPClient.invoke(IdentityServiceSOAPClient.java:267)
... 96 more
Caused by: oracle.j2ee.ws.wsdl.LocalizedWSDLException: WSDLException: faultCode=PARSER_ERROR: Failed to read wsdl file at: "http://<DNS_Name>:7001/integration/services/IdentityService/identity?WSDL", caused by: java.net.ConnectException. : java.net.ConnectException: Connection refused: connect
at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:371)
at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:616)
at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:594)
at oracle.j2ee.ws.common.jaxws.WSDLMetadata.readWsdlDefinition(WSDLMetadata.java:369)
at oracle.j2ee.ws.common.jaxws.WSDLMetadata.initPortsFromWsdl(WSDLMetadata.java:194)
at oracle.j2ee.ws.common.jaxws.WSDLMetadata.initPorts(WSDLMetadata.java:164)
... 100 more
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket.<init>(Socket.java:375)
at java.net.Socket.<init>(Socket.java:218)
at javax.net.DefaultSocketFactory.createSocket(SocketFactory.java:212)
at HTTPClient.HTTPConnection$EstablishConnection$2.run(HTTPConnection.java:4268)
at HTTPClient.HttpClientConfiguration.doAction(HttpClientConfiguration.java:708)
at HTTPClient.HTTPConnection.doAction(HTTPConnection.java:5379)
at HTTPClient.HTTPConnection$EstablishConnection.run(HTTPConnection.java:4254)
]]1. Reconfigured "Listen address" in setting for adminServer in "http://localhost:7001/console" from vlue "localhost" to hostname like "myOfficeComputer".
2. Add a new line "127.0.0.1 myOfficeComputer" in C:\Windows\System32\drivers\etc\hosts file.
3. Redeployed SOA composites and human task form.
4. Run as administrator role for startWebLogic.cmd on Windows 7.
Edited by: sh**** on Nov 8, 2011 10:19 PM
Maybe you are looking for
-
Hi Everyone. I have a Wireless B Router model BEFW11S4 v 4.0. We recently bought a new computer that has Windows Vista. Recently we started having some problems with the internet. Our Windows Firewall is OFF as we have Norton 360 v 2.0. Our problem i
-
CLI session limit 32 reached. Exiting. on nexus n5k
Hi Guys , I'm having a problem with Nexus n5k , when i'm trying to telnet to the machine ,i get this error : "CLI session limit 32 reached. Exiting." I can connect to it by console ,but i don;t know how to clear all those sessions . Needs help Thanks
-
Execution Error NW SP11.
Hi, I have the following strange error after an upgrade to SP11. I have a Constant.java file which contains all the constants of my application. The constants are refered in the my JSP file, I'm using a lot of constants in the same page, some of the
-
walmart, the place I purchased my blue micropoto has a 5day refund policy! Just in case you might want to know.
-
I'm tring to install a d2 quadra external drive but can't use the setup assistant because "PowerPC Applications are no longer supported". Anyone have any ideas?