Crucial MX100 256GB - sudden random freezes
Hello I have a MX100 256GB as a system drive. So far I had no issue with it except for a single event when SSD became invisible to the system and required a power cycle to appear again. I have MSI Z77 Mpower motherboard with up-to-date BIOS, latest Intel RST drivers and MU02 Firmware. Suddenly yesterday my computer froze while idling in desktop with no particular reason. There was nothing in the Event log, so I came to conclusion that the problem is with the SSD. The freezes were occuring randomly, but usually within couple of minutes after booting up PC. I searched the internet and forums and finally uninstalled Intel RST which apparently solved the issue. At least there are no freezes so far. What I don´t understand is how it could work without problems for such a long time. There was no recent software installation, no updates, nothing new at all. Also the AS SSD benchmark and Windows device manager shows iastor as an active driver. I thought that if I uninstall Intel RST it would switch to msahci. They can work separately? What should I do now, should I try to reinstall Intel RST, is there any benefit doing so? Thanks for the help.
Here is my Crystal Disk Info Log
CrystalDiskInfo 6.5.2 (C) 2008-2015 hiyohiyo
Crystal Dew World : http://crystalmark.info/
OS : Windows 7 Ultimate SP1 [6.1 Build 7601] (x64)
Date : 2015/06/24 9:37:03
-- Controller Map ----------------------------------------------------------
+ Intel(R) 7 Series/C216 Chipset Family SATA AHCI Controller [ATA]
- Crucial_CT256MX100SSD1
- ST2000DM001-1CH164
- ATAPI iHAS124 D
- ST2000DM001-1CH164
+ AQU3TIF7 IDE Controller [SCSI]
- GDOJG M70TE70 SCSI CdRom Device
-- Disk List ---------------------------------------------------------------
(1) Crucial_CT256MX100SSD1 : 256,0 GB [0/0/0, pd1] - mi
(2) ST2000DM001-1CH164 : 2000,3 GB [1/0/1, pd1] - st
(3) ST2000DM001-1CH164 : 2000,3 GB [2/0/3, pd1] - st
(1) Crucial_CT256MX100SSD1
Model : Crucial_CT256MX100SSD1
Firmware : MU02
Serial Number : *removed personal information*
Disk Size : 256,0 GB (8,4/137,4/256,0/256,0)
Buffer Size : Neznámy údaj
Queue Depth : 32
# of Sectors : 500118192
Rotation Rate : ---- (SSD)
Interface : Serial ATA
Major Version : ACS-2
Minor Version : ATA8-ACS version 6
Transfer Mode : SATA/600 | SATA/600
Power On Hours : 65 hod.
Power On Count : 204 krát
Host Writes : 868 GB
Wear Level Count : 6
Temperature : 21 C (69 F)
Health Status : Dobrý (100 %)
Features : S.M.A.R.T., APM, 48bit LBA, NCQ, TRIM, DevSleep
APM Level : 00FEh [ON]
AAM Level : ----
-- S.M.A.R.T. --------------------------------------------------------------
ID Cur Wor Thr RawValues(6) Attribute Name
01 100 100 __0 000000000000 Raw Read Error Rate
05 100 100 __0 000000000000 Reallocated Sectors Count
09 100 100 __0 000000000041 Power-On Hours
0C 100 100 __0 0000000000CC Power Cycle Count
AB 100 100 __0 000000000000 Program Fail Count
AC 100 100 __0 000000000000 Erase Fail Count
AD 100 100 __0 000000000006 Average Block-Erase Count
AE 100 100 __0 000000000003 Unexpected Power Loss Count
B4 __0 __0 __0 00000000086F Unused Reserve NAND Blocks
B7 100 100 __0 000000000000 SATA Interface Downshift
B8 100 100 __0 000000000000 Error Correction Count
BB 100 100 __0 000000000000 Reported Uncorrectable Errors
C2 _79 _70 __0 001E00100015 Temperature
C4 100 100 __0 000000000000 Reallocation Event Count
C5 100 100 __0 000000000000 Current Pending Sector Count
C6 100 100 __0 000000000000 Smart Off-line Scan Uncorrectable Error Count
C7 100 100 __0 000000000000 Ultra DMA CRC Error Rate
CA 100 100 __0 000000000000 Percent Lifetime Used
CE 100 100 __0 000000000000 Write Error Rate
D2 100 100 __0 000000000000 Successful RAIN Recovery Count
F6 100 100 __0 00006C85B21D Total Host Sector Writes
F7 100 100 __0 000002981609 Host Program Page Count
F8 100 100 __0 0000040620F7 Background Program Page Count
-- IDENTIFY_DEVICE ---------------------------------------------------------
0 1 2 3 4 5 6 7 8 9
000: 0440 3FFF C837 0010 0000 0000 003F 0000 0000 0000
010: 2020 2020 2020 2020 3134 3435 3044 4241 3233 3543
020: 0000 0000 0000 4D55 3032 2020 2020 4372 7563 6961
030: 6C5F 4354 3235 364D 5831 3030 5353 4431 2020 2020
040: 2020 2020 2020 2020 2020 2020 2020 8010 4001 2F00
050: 4001 0000 0000 0007 3FFF 0010 003F FC10 00FB B110
060: FFFF 0FFF 0000 0007 0003 0078 0078 0078 0078 40B0
070: 0000 0000 0000 0000 0000 001F 950E 00C6 016C 004C
080: 03F8 0028 746B 7D09 6163 7469 BC09 6163 407F 0001
090: 0001 00FE FFFE 0000 0000 0000 0000 0000 0000 0000
100: 32B0 1DCF 0000 0000 0000 0008 6003 0000 500A 0751
110: 0DBA 235C 0000 0000 0000 0000 0000 0000 0000 401E
120: 401C 0000 0000 0000 0000 0000 0000 0000 0029 4D55
130: 3032 2E30 312E 5330 0000 0000 0000 3337 3039 2020
140: 2020 3130 524E 3336 3333 2020 2020 4D54 4644 4441
150: 4B32 3536 4D42 4720 0000 0000 0000 0000 0001 0000
160: 0000 0000 0000 0000 0000 0000 0000 0000 0003 0001
170: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
180: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
190: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
200: 0000 0000 0000 0000 0000 0000 0035 0000 0000 4000
210: 0000 0000 0000 0001 0000 0000 0000 0001 0000 0000
220: 0000 0000 107F 0000 0000 0000 0000 0000 0000 0000
230: 0000 0000 0000 0000 0001 00FF 0000 0000 0000 0000
240: 0000 0000 0000 4000 0000 0000 0000 0000 0000 0000
250: 0000 0000 0000 0000 0000 78A5
-- SMART_READ_DATA ---------------------------------------------------------
+0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +A +B +C +D +E +F
000: 10 00 01 2F 00 64 64 00 00 00 00 00 00 00 05 33
010: 00 64 64 00 00 00 00 00 00 00 09 32 00 64 64 41
020: 00 00 00 00 00 00 0C 32 00 64 64 CC 00 00 00 00
030: 00 00 AB 32 00 64 64 00 00 00 00 00 00 00 AC 32
040: 00 64 64 00 00 00 00 00 00 00 AD 32 00 64 64 06
050: 00 00 00 00 00 00 AE 32 00 64 64 03 00 00 00 00
060: 00 00 B4 33 00 00 00 6F 08 00 00 00 00 65 B7 32
070: 00 64 64 00 00 00 00 00 00 00 B8 32 00 64 64 00
080: 00 00 00 00 00 00 BB 32 00 64 64 00 00 00 00 00
090: 00 00 C2 22 00 4F 46 15 00 10 00 1E 00 00 C4 32
0A0: 00 64 64 00 00 00 00 00 00 00 C5 32 00 64 64 00
0B0: 00 00 00 00 00 00 C6 30 00 64 64 00 00 00 00 00
0C0: 00 00 C7 32 00 64 64 00 00 00 00 00 00 00 CA 31
0D0: 00 64 64 00 00 00 00 00 00 00 CE 0E 00 64 64 00
0E0: 00 00 00 00 00 00 D2 32 00 64 64 00 00 00 00 00
0F0: 00 2D F6 32 00 64 64 1D B2 85 6C 00 00 00 F7 32
100: 00 64 64 09 16 98 02 00 00 00 F8 32 00 64 64 F7
110: 20 06 04 00 00 00 00 00 00 00 00 00 00 00 00 00
120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160: 00 00 00 00 00 00 00 00 00 00 80 00 A6 04 00 7B
170: 03 00 01 00 02 03 03 00 00 00 00 00 00 00 00 00
180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1D0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1E0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1F0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2E
-- SMART_READ_THRESHOLD ----------------------------------------------------
+0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +A +B +C +D +E +F
000: 10 00 01 00 00 00 00 00 00 00 00 00 00 00 05 00
010: 00 00 00 00 00 00 00 00 00 00 09 00 00 00 00 00
020: 00 00 00 00 00 00 0C 00 00 00 00 00 00 00 00 00
030: 00 00 AB 00 00 00 00 00 00 00 00 00 00 00 AC 00
040: 00 00 00 00 00 00 00 00 00 00 AD 00 00 00 00 00
050: 00 00 00 00 00 00 AE 00 00 00 00 00 00 00 00 00
060: 00 00 B4 00 00 00 00 00 00 00 00 00 00 00 B7 00
070: 00 00 00 00 00 00 00 00 00 00 B8 00 00 00 00 00
080: 00 00 00 00 00 00 BB 00 00 00 00 00 00 00 00 00
090: 00 00 C2 00 00 00 00 00 00 00 00 00 00 00 C4 00
0A0: 00 00 00 00 00 00 00 00 00 00 C5 00 00 00 00 00
0B0: 00 00 00 00 00 00 C6 00 00 00 00 00 00 00 00 00
0C0: 00 00 C7 00 00 00 00 00 00 00 00 00 00 00 CA 00
0D0: 00 00 00 00 00 00 00 00 00 00 CE 00 00 00 00 00
0E0: 00 00 00 00 00 00 D2 00 00 00 00 00 00 00 00 00
0F0: 00 00 F6 00 00 00 00 00 00 00 00 00 00 00 F7 00
100: 00 00 00 00 00 00 00 00 00 00 F8 00 00 00 00 00
110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1D0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1E0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1F0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1E
]
Similar Messages
-
Random freezing and odd keyboard behaviors on 10.5.8
My random freezing started on 10.5.6. Updated to 10.5.7 and the problem persist. I have decided to upgrade to 10.5.8. Everything seemed fine for a day and a half. Then all of a sudden random freezing when starting, login, wake from sleep, etc.. and now odd keyboard behaviors. function keys randomly work when computer is not frozen.
I have tried every option listed in the discussions here and elsewhere. Does anyone have the same problems?I have tried so far:
disk permissions repaired from dvd and startup,
disk first aid,cleaned caches, virus checked, zapped the pram, reset power management, ran apple hardware check, ran disk warrior, trashed network prefs, deleted sleep image, replaced directory with techtool pro, tried new user account, re-updated, removed 3rd party software, and nothing works????? -
Anyone with a Crucial MX100 SSD and problems with Mavericks?
Hi there.
I carbon copy cloned my ex Intel X25M G2 160gb SSD to my new Crucial MX100 512gb SSD and installed it in my mac mini Late 2012 (i7 2.6ghz).
Never experienced before, now the system freezing up and getting the "spinning ball of death" for almost 10 seconds (maybe more) and than the system becomes normal. After few time (don't know maybe two minutes, maybe twenty, it depends) again freezing up and getting the "spinning ball of death".
Are there anyone with a Crucial MX100 SSD that experience my problem? Solution? Apple Hardware Test on the mac mini say 'no hardware problem at all' (I went for the long test during the night). Maybe the clone process had some unknown problem even though I did it many times in the past and never experienced something similar.
Do I have to re-install to have the answer? What do you think?
Regards,
Claudio.There's a firmware upgrade for the MX100 (search for MX100 in the dropdown here: http://www.crucial.com/usa/en/support-ssd) however after reading through the thread, the upgrade seems to require a fairly advanced skills and knowledge. Anyway I'm not sure if the upgrade is intended to fix spinny beachball issues or random and frequent restarts like I'm experiencing. Here's how Crucial describes the update...
Release Date: 03/10/2015 (Manual boot file for Windows and Mac)
Firmware for the MX100 (all form factors) is being updated from version MU01 to MU02. The MX100 is updateable to this new firmware starting from previous versions using tools provided by Micron.
This update will be mandatory cut-in for new product built in Micron factories, and is an OPTIONAL update for any drive in the field. For end users, it is recommended if the user is experiencing or wishes to prevent an issue related to the following items.
Version MU02 includes the following changes:
Improved stability, Efficiency, and Performance during power state transitions
Improved handling of environments with unstable power supplies
Improved handling of environments with SATA interface signal integrity issues
Improved response time for SMART read commands
Corrected error handling NCQ Trim Commands
Corrected reporting of SMART Attribute 5 -
Mid 2009 13.3" Macbook Pro random freezing issue
Hi all,
I had a 2009 13.3" Unibody Macbook and last week purchased a 13.3" Macbook Pro. I had installed 4GB of RAM in the MB myself, and it had worked fine for the month I owned it.
I backed up my MB with an external USB hard drive using Time machine, restored from this backup on my MBP and moved the 4GB RAM over.
When using the MBP I get random freezes lasting between 1 and 3 seconds, occuring every 5 to 30 minutes.
Could someone please advise a good way to diagnose this problem further? I am guessing it is not the RAM as it worked fine whilst in the MB.I have an update!
I made an appointment with a local Apple Genius Bar and talked to a technian. He said it was neither the RAM nor the Hard Drive at fault.
His only thoughts were that a software issue was the root cause. I have been doing some serious investigating this morning and figured it out. Viewing system.log in Console shows:
SMS::infiniteIntTimerEventHandler ERROR: we have infinite interrupts, disabling
At exactly 5 minute intervals. These correlate with the freezes (to the second).
SMS refers to the Apple Sudden Motion Sensor. I disabled this by doing "sudo pmset -a sms 0" in Terminal, rebooted and everything is fine.
I have no idea why the SMS thinks the Macbook is falling every 5 minutes, but when it occures the hard drive heads are locked down to prevent damage, which is a perfect reason as to why iTunes would crash but Spotify (streaming internet music) does not.
Problem solved!
Edit:
In reply to some questions posted by other members (thank you by the way).
I did install EFI 1.7 update. I did not use the Migration assistance. At some point I will do a fresh install then pick and choose parts from a backup rather than using a full Time Machine Restore. This could still have been the root cause of the issue, but it is hard to tell.
Thanks guys!
Message was edited by: mynamestom -
Disgusted with HP Elite m9280a constant/random freezes, lock ups, BSOD, black screen
constant/random freezes, lock ups, BSOD, black screen.
I have been trying to trouble shoot this PC for almost a day now. weird problems like when 3 sticks of memory is present it wil not boot but it will boot on 1 and on 2 sticks will have hangs?
disappointed tot the max... u think HP TOTAL CARE - u pay extra thinking u are going to get a decent system...
i have run diagnostics on all major components... still no luck
someone please help - i have never spent sooo much time trying to repair a pcTry this bootable memory diagnostic tool:
Download memtest86 iso file and burn it to disk using Imgburn.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
KT6 Delta - Random freezes and LAN Issues
Just built a new PC, installed Win XP, installed all the drivers etc.
I get random freezes - as in the machine will just stop responding totally. I could run for an hour before a freeze, other times its frozen before I've even logged in.
Also the LAN keeps dropping out too. The timing of this is also random, just to make things interesting. I could be downloading a 20MB file, get only 2MB into it, then it just sits there. The only way to get the LAN back up and running is to reboot. Once I've rebooted, its a case of just waiting for it to fail again
The specs are as follows:
KT6 Delta-FIS2R (Gigabit LAN etc.)
AMD 2800XP+
1GB Crucial (2 x 512)
ATI Radeon 9600 Pro
80 Maxtor HD
400W PSU
I've got the FSB set to 166 and also set the memory up correctly (333 and 2.5 cl) but to no avail.
I was running with a Soundblaster Audigy card, but took that out and still got the same. I even tried taking out one of the memory modules.
I don't think its a temperature issue as the CPU is currently running at about 47 Degrees and I've got the side off-of the case.
Please - anyone got any ideas???I have a KT6 Delta LSR and am having probs with the onboard Broadcom 4401 as well.
After Initial boot of machine I have 2-5 minutes to surf the net or whatever. At that time I lose connection. Also if I linger on one page long enough to read, I lose connection. Or shutdown a net connected program, it loses connection.
When I play Tribes - the connection stays till I leave the server - then I have to reboot.
This is driving me nuts. I have disabled the Lan in bios and installed a Netgear 10/100. XP recognizes it but cannot get rid of "Cable not plugged in" message. So I reinstalled the 4401.
I have RR and am behind a Phoebe 4 port router. None of the other computers have a problem with the router, and I have tried changing plug in ports around among the computers.
I have the same version of driver for it as the latest at MSI. Flashed the latest bios lately as well, in desperation.
Any ideas? I sure would appreciate it.
Oso
KT6 Delta-LSR
XP SP1
Gig of DDR
400w power supply -
My macbook pro late 2008 randomly freeze
Hi I recently upgrade my macbook pro Late 2008 by adding a 250 go Crucial SSD drive in the main harddrive spot. I also put a 1 To HDD in the place of the super drive.
Since then, my macbook randomly freeze. I can't see any link to any specific usage. It just happen for no reasons. I had to reboot by holding the power button.
Thanks for your help!
Here is the informations I collect using the software "EtreCheck":
Description du problème :
L’ordinateur gèle sans raisons. Peu importe le moment ou l’intensité de l’utilisation.
EtreCheck version: 2.1.8 (121)
Report generated 18 avril 2015 13:21:13 UTC−4
Télécharger EtreCheck à http://etresoft.com/etrecheck
Cliquez sur les liens [Cliquer pour l’aide] pour l’assistance avec les produits non-Apple.
Cliquez sur les liens [Détails] pour plus d'informations sur cette ligne.
Informations matérielles : ℹ️
MacBook Pro (15 pouces, fin 2008) (Caractéristiques techniques)
MacBook Pro - modèle : MacBookPro5,1
1 2.4 GHz Intel Core 2 Duo CPU : 2-core
8 GB RAM Extensible
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 0/DIMM1
4 GB DDR3 1067 MHz ok
Bluetooth: Vieux - Handoff/Airdrop2 pas disponible
Wireless: en1: 802.11 a/b/g/n
La santé de la batterie : Normal - Comptage de cycles 155
Informations vidéo : ℹ️
NVIDIA GeForce 9400M - VRAM : 256 MB
NVIDIA GeForce 9600M GT - VRAM : 256 MB
Color LCD 1440 x 900
SMBX2450 spdisplays_1080p
Logiciel du système : ℹ️
OS X 10.9.5 (13F34) - Temps depuis le démarrage : 0:7:8
Informations des disques : ℹ️
Crucial_CT256MX100SSD1 disk0 : (256,06 GB)
EFI (disk0s1) <non monté> : 210 Mo
New Macintosh HD - SSD 2014 (disk0s2) / : 255.72 Go (66.29 Go libre)
ST1000LM024 HN-M101MBB disk1 : (1 TB)
EFI (disk1s1) <non monté> : 210 Mo
Storage Macintosh (disk1s2) /Volumes/Storage Macintosh : 999.86 Go (942.51 Go libre)
Informations USB : ℹ️
Apple Inc. Built-in iSight
Apple, Inc. Keyboard Hub
Apple Inc. Apple Keyboard
Brother HL-L2360D series
Apple, Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Logitech USB Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper : ℹ️
Mac App Store et développeurs identifiés
Extensions du noyau : ℹ️
/Library/Extensions
[engagé] com.Logitech.Control Center.HID Driver (3.9.1 - SDK 10.8) [Cliquer pour l’aide]
[engagé] com.movavi.driver.SoundGrabber (1.6.5 - SDK 10.6) [Cliquer pour l’aide]
/System/Library/Extensions
[désengagé] com.IKMultimedia.driver.StompIO1 (1.0.0) [Cliquer pour l’aide]
[engagé] com.Logitech.Unifying.HID Driver (1.3.0 - SDK 10.6) [Cliquer pour l’aide]
[désengagé] com.caiaq.driver.NIUSBGuitarRigMobileDriver (2.4.23) [Cliquer pour l’aide]
[désengagé] com.caiaq.driver.NIUSBHardwareDriver (2.4.23) [Cliquer pour l’aide]
[désengagé] com.digidesign.iokit.DigiDal (8.0.1f1) [Cliquer pour l’aide]
[désengagé] com.digidesign.iokit.DigiIO (8.0.1f1) [Cliquer pour l’aide]
[désengagé] com.ikmultimedia.driver.StealthPedal (1.0.0) [Cliquer pour l’aide]
[désengagé] com.maudio.usb.fasttrackpro.driver (1.8.1) [Cliquer pour l’aide]
[désengagé] com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) [Cliquer pour l’aide]
[désengagé] com.seagate.driver.PowSecDriverCore (5.2.6 - SDK 10.4) [Cliquer pour l’aide]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[désengagé] com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) [Cliquer pour l’aide]
[désengagé] com.paceap.kext.pacesupport.panther (5.9 - SDK 10.-1) [Cliquer pour l’aide]
[engagé] com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) [Cliquer pour l’aide]
[désengagé] com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) [Cliquer pour l’aide]
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[désengagé] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.6 - SDK 10.4) [Cliquer pour l’aide]
[désengagé] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6 - SDK 10.5) [Cliquer pour l’aide]
[désengagé] com.seagate.driver.SeagateDriveIcons (5.2.6 - SDK 10.4) [Cliquer pour l’aide]
Éléments de démarrage : ℹ️
HP IO : Chemin : /Library/StartupItems/HP IO
Les éléments de démarrage sont obsolètes avec OS X Yosemite
Daemons de lancement systèmes avec un problème : ℹ️
[en marche] com.seagate.TBDecorator.plist [Cliquer pour l’aide]
Agents de lancement : ℹ️
[désengagé] com.adobe.AAM.Updater-1.0.plist [Cliquer pour l’aide]
[en marche] com.adobe.AdobeCreativeCloud.plist [Cliquer pour l’aide]
[échec] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a...plist [Cliquer pour l’aide]
[échec] com.lexmark.bmlaunchd.plist [Cliquer pour l’aide]
[échec] com.lexmark.lexnetlaunchd.plist [Cliquer pour l’aide]
[en marche] com.Logitech.Control Center.Daemon.plist [Cliquer pour l’aide]
[en marche] com.m-audio.fasttrackpro.helper.plist [Cliquer pour l’aide]
[engagé] com.oracle.java.Java-Updater.plist [Cliquer pour l’aide]
Daemons de lancements : ℹ️
[en marche] com.adobe.adobeupdatedaemon.plist [Cliquer pour l’aide]
[engagé] com.adobe.ARMDC.Communicator.plist [Cliquer pour l’aide]
[engagé] com.adobe.ARMDC.SMJobBlessHelper.plist [Cliquer pour l’aide]
[engagé] com.adobe.fpsaud.plist [Cliquer pour l’aide]
[engagé] com.oracle.java.Helper-Tool.plist [Cliquer pour l’aide]
[engagé] com.oracle.java.JavaUpdateHelper.plist [Cliquer pour l’aide]
[en marche] com.paceap.eden.licensed.plist [Cliquer pour l’aide]
[engagé] PACESupport.plist [Cliquer pour l’aide]
Agents de lancement pour l’utilisateur : ℹ️
[engagé] com.adobe.AAM.Updater-1.0.plist [Cliquer pour l’aide]
[engagé] com.adobe.ARM.[...].plist [Cliquer pour l’aide]
[engagé] com.facebook.videochat.[expurgé].plist [Cliquer pour l’aide]
[engagé] com.google.keystone.agent.plist [Cliquer pour l’aide]
[engagé] com.valvesoftware.steamclean.plist [Cliquer pour l’aide]
Éléments Ouverture : ℹ️
Steam Application (/Applications/Steam.app)
TimingHelper UNKNOWN (missing value)
gfxCardStatus Application (/Applications/gfxCardStatus.app)
Tabs UNKNOWN (missing value)
AURecvAddHostSheet.nib Document Caché (/System/Library/Components/CoreAudio.component/Contents/PlugIns/CoreAudioAUUI. bundle/Contents/Resources/ro.lproj/AURecvAddHostSheet.nib)
Chronicle Mini UNKNOWN (missing value)
MenuTab for Facebook UNKNOWN (missing value)
ElementsAutoAnalyzer Application (/Applications/Adobe Elements 10 Organizer.app/Contents/ElementsAutoAnalyzer.app)
Dropbox Application (/Applications/Dropbox.app)
NIHardwareAgent Application Caché (/Library/Application Support/Native Instruments/Hardware/NIHardwareAgent.app)
AdobeResourceSynchronizer Application Caché (/Applications/Adobe Acrobat DC/Adobe Acrobat.app/Contents/Helpers/AdobeResourceSynchronizer.app)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
Plug-ins internets : ℹ️
Default Browser : Version : 537 - SDK 10.9
Flip4Mac WMV Plugin : Version : 2.4.4.2 [Cliquer pour l’aide]
iLokClientHelper : Version : 3.5 - SDK 10.5 [Cliquer pour l’aide]
OfficeLiveBrowserPlugin : Version : 12.3.6 [Cliquer pour l’aide]
AdobeAAMDetect : Version : AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Cliquer pour l’aide]
FlashPlayer-10.6 : Version : 17.0.0.169 - SDK 10.6 [Cliquer pour l’aide]
AdobePDFViewerNPAPI : Version : 15.007.20033 - SDK 10.8 [Cliquer pour l’aide]
DivXBrowserPlugin : Version : 2.0 [Cliquer pour l’aide]
Flash Player : Version : 17.0.0.169 - SDK 10.6 [Cliquer pour l’aide]
LogMeIn : Version : 1.0.961 - SDK 10.7 [Cliquer pour l’aide]
iPhotoPhotocast : Version : 7.0
LogMeInSafari32 : Version : 1.0.961 - SDK 10.7 [Cliquer pour l’aide]
AdobePDFViewer : Version : 15.007.20033 - SDK 10.8 [Cliquer pour l’aide]
QuickTime Plugin : Version : 7.7.3
RealPlayer Plugin : Version : Inconnu [Cliquer pour l’aide]
Silverlight : Version : 5.1.30514.0 - SDK 10.6 [Cliquer pour l’aide]
JavaAppletPlugin : Version : Java 8 Update 45 Vérifier la version
Plug-ins internets pour l’utilisateur : ℹ️
fbplugin_1_0_3 : Version : Inconnu [Cliquer pour l’aide]
Extensions de Safari : ℹ️
Searchme [Adware ! - Enlever]
Antidote
Amazon Shopping Assistant [Adware ! - Enlever]
Ebay Shopping Assistant [Adware ! - Enlever]
Panneaux de préférences tiers : ℹ️
DivX [Cliquer pour l’aide]
Flash Player [Cliquer pour l’aide]
Flip4Mac WMV [Cliquer pour l’aide]
Java [Cliquer pour l’aide]
Logitech Control Center [Cliquer pour l’aide]
M-AudioFastTrackPro [Cliquer pour l’aide]
Native Instruments USB Audio [Cliquer pour l’aide]
Paragon NTFS for Mac ® OS X [Cliquer pour l’aide]
Time Machine : ℹ️
Ignorer les fichiers du système : NON
Sauvegarde automatique : OUI
Disques sauvegardés :
New Macintosh HD - SSD 2014 : Taille de disque : 255.72 Go Disque utilisé : 189.42 Go
Destinations :
MACintouch [Local]
Taille totale : 499.76 Go
Nombre de sauvegardes total : 29
Sauvegardes la plus agée : 2013-11-18 17:57:27 +0000
Dernière sauvegarde : 2015-04-16 16:37:30 +0000
Taille de la disque de sauvegarde : Trop petit
Taille de sauvegarde 499.76 Go > (Disque utilisé 189.42 Go X 3)
L’utilisation du CPU par processus : ℹ️
9% WindowServer
1% mdworker
0% mds
0% fontd
0% AdobeCrashDaemon
L’utilisation de la RAM par processus : ℹ️
490 Mo firefox
120 Mo com.apple.IconServicesAgent
103 Mo mds_stores
94 Mo Creative Cloud
69 Mo ocspd
Informations de la mémoire virtuelle : ℹ️
4.58 Go RAM Disponible
1.88 Go RAM Active
1.11 Go RAM Inactive
753 Mo RAM Résidente
758 Mo Pages entrants
0 o Sorties pages
Informations du diagnostic : ℹ️
Apr 18, 2015, 01:13:39 PM Examen de soi - succès
Apr 17, 2015, 06:22:44 PM /Users/[expurgé]/Library/Logs/DiagnosticReports/Empire Total War_2015-04-17-182244_[expurgé].crash
Apr 6, 2015, 02:03:41 PM /Library/Logs/DiagnosticReports/Kernel_2015-04-06-140341_[expurgé].panic [Click for details]Hi r.w.p & welcome to the forums...
Some or all of the following may be necessary - try in this order:
1. Try resetting your PRAM/NVRAM ( http://support.apple.com/kb/HT1379?viewlocale=en_US ). If everything isn't fixed, then continue to follow the steps here including resetting your SMC ( http://support.apple.com/kb/HT1411 ) if necessary.
2. Use Font Book to eliminate all bad and duplicate fonts.
3. Reinstall (or install for the first time) the .6.1 and .6.2 updates by downloading and installing the combo updater ( http://support.apple.com/kb/DL959 ).
4. Reinstall 10.6 using your Snow Leopard install DVD by installing Snow over Snow using the upgrade method. Test your system after returning to 10.6. If is good there, then you may not want to re-install the.6.1 & .6.2 updates - if you do, then use the combo updater again ( http://support.apple.com/kb/DL959 ).
Still no joy, take it to an Apple Store and ask staff there for assistance. -
Random freezing on a Macbook Air?
Hello,
I am encountering random freezing on my Macbook Air, that has started in the last few weeks.
- Applications will suddenly crash at random points
- Sometimes Lion will pop a translucent grey screen asking me to hold down a power button.
- I can no longer relilably install software updates, it often crashes or reports the download corrupted. Sometimes I succeed after 3 or 4 attempts.
- To try and verify it wasn't malware, I checked with Kapersky AV for Mac (it claims it is clean), and I also manually checked for Flashback (I'm not affected)
- Web browser frequently randomly crash, and I can't run anything that involves 3D graphics
- it still happens even if I disable startup apps
- Sometimes I get the forever beachball and the top bar becomes corrupt or blank
- There is no pattern to this, except some apps seem to crash more often than others
It feels like a "hardware" issue, due to its intermittency/unpredictability/non-repeatability.
I am wondering if either my RAM or CPU is defective? Or is this something software?
It is a 2010 Macbook Air 11.6", a little more than a year old. What are my recourse that would result in minimum wasted time:
Sometimes it goes for an hour with no problems (I can even run 3D) and might not be able to demonstrate in front of Apple.
Unfortunately, I did not have the foresight to get AppleCare, so I'll have to expend some time and/or money.
What is least painful?
I first backup my personal files (mostly done, as it's mostly on various cloud services)
1. Assume it's software: Attempt to reinstall OSX, cross fingers it doesn't happen again? Run a few overnight 3D benchmark tests to 'burn it in' and verify it is not a hardware problem?
2. or Purchase a new Macbook Air & then bring the old Air in, then resell the Air after it's repaired? (Minimum downtime method, high cost method)
3. or Apple Store & try to get it repaired/serviced. (Lower cost method)
4. or trade it in for a discounted refurbished 2011 Air? (If the Apple Store does this sort of stuff)
Thanks,
Mark RejhonI am able to drag photos from iPhoto to Contacts on my MacBook Air. I resize the iPhoto window to make it smaller, open Contacts, select the Contact in question and click the Edit button at the lower right of the contact. I then drag the photo from iPhoto.
The step that I'm guessing that you might be missing is clicking the Edit button at the lower right of the contact. -
Anyone using Windows 7 RC on an R61 ? (Random freezing issues)
My R61 will randomly freeze for 2-3 minutes during which time it becomes unusable as I cannot move the cursor. All programs stop responding for 2-3 minutes and suddenly the computer will snap out of it and become usable again. This will happen probalby twice an hour when I'm using the laptop.
I've installed both 32 bit and 64 bit versions of the Windows 7 RC and the freezing problem occurs on each. This R61 has been running Windows XP flawlessly for 2 years now otherwise.
The 64 bit version of Windows 7 RC runs flawlessly on my desktop computer with many of the same programs installed so I'm guessing it's a driver incompatability with the my R61 that is causing the issue, I just can't narrow it down.RRC:
Take a look at this thread and see if the possibility of a missing Intel Matrix Storage Manager driver might be the cause of your problem. Here's the link to the discussion thread: T61 freezes every 15 minutes.
Also, have a look at this post, it might contain a golden nugget of information about something you may have overlooked:
Device Driver Install Order
Michael
W520 (4270 CTO), which replaced a W500 (4062-27U), which replaced a T42P, which replaced an A21P... -
My mac mini will randomly freeze up and my scrren will get multi-colored rectangle boxes
my mac mini will randomly freeze up and my scrren will get multi-colored rectangle boxes all across the screen. the only option i have left to do is reboot my whole system by the power button. has anyone ever encountered this problem?
The two most highly recomended RAM suppliers here in the ASC,
are > OWC macsales.com and > Crucial.com -
Dell Inspiron 3847 and MX100 256GB SSD
I bought several new Insprion 3847 and was planning on upgrading with MX100 256GB SSDs. I'm getting BSOD after cloning the hard drives on all of them with any SSD I try. Can anyone confirm this is a known incompatibility or suggest a fix? I've used another brand SSD in one computer with expected results. Thanks,Micah
Hi Micah,
First of I'm sorry to hear that you're having issues with your SSD. I have looked in to the Inspiron 3847 and we do recommend the MX100 as compatible with that system.
It sounds like you have more than one MX100 and one Inspiron 3847, is that correct:? Can you confirm what you used to clone the SSD's?
You said that you're getting BSOD errors, is this happening as soon as your turn the system on or is it random? Do you have the MX100 installed internally in the system?
I will get this looked in to further for you so if you could confirm as much of the above as possible. Once I have that information I can look in to exactly what has caused the issues you're having. -
HP DV6000 randomly freezing with Arch Linux
Hello,
Just to clarify I am working with Arch Linux as a Web Developer, therefore I do have special needs such as having 20+ tabs open with vital information in different pages.
I can assure that after using Windows XP, Windows 7, xUbuntu, Linux Mint and Ubuntu I have never had such breaks or freezes in this machine.
The freezes are identifiable when the mouse seems to be very slow to move, the computer very slow to respond, the cursor of the icon does not change within the context where it is, I can't even open the menu bar to access the terminal (using Terminator).
After noticing these randomly freezes, I've started to keep the Terminator open with top command inserted. After seeing the values of percentage usage in CPU or RAM, the levels don't even go up more than 20%. However, I notice that the laptop suddenly starts heating a lot.
The solution is just to wait with some luck about 10 minutes. If it does not go on after that, I need to turn off the computer by pressing the button or unplugging the battery (yeah, the battery is dead too).
Some main packages I currently use are:
- Cinnamon
- Filezilla
- Netbeans PHP IDE 8.0
- Skype
- Geany
- 7-Zip FM
- Adobe Flash Player
- Chromium (my main browser)
- Firefox
- SSH
- Htop
- VLC Media Player
- Terminator
Any ideas of what could it be?
Thanks!
Last edited by SirPereira (2014-05-19 14:52:56)Rexilion wrote:
It seems you do not have any swap. Correct?
Could you provide the output of dmesg after the occurance?
Yes, you are correct, I do not have any swap. Would I benefit from it? I guess I never used it.
After the occurance you mean, after the freeze? I will try to do it, but it is rare the case when the computer is able to not freeze at all.
Got it now:
The output of dmesg:
[ 0.443614] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.443838] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 0.444061] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
[ 0.444184] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.444187] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.444190] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.444210] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.444213] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.444217] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.444237] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.444239] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.444243] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.444266] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.444271] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.444290] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.444293] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 0.444295] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
[ 0.444297] pci 0000:06:00.2: Signaling PME through PCIe PME interrupt
[ 0.444298] pci 0000:06:00.3: Signaling PME through PCIe PME interrupt
[ 0.444300] pci 0000:06:00.4: Signaling PME through PCIe PME interrupt
[ 0.444305] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.444324] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.444329] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.444345] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.444364] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.444399] intel_idle: does not run on family 6 model 23
[ 0.444441] GHES: HEST is not enabled!
[ 0.444500] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.444971] Linux agpgart interface v0.103
[ 0.445012] rtc_cmos 00:03: RTC can wake from S4
[ 0.445141] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.445167] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.445178] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.445322] TCP: cubic registered
[ 0.445446] NET: Registered protocol family 10
[ 0.445656] NET: Registered protocol family 17
[ 0.445905] registered taskstats version 1
[ 0.446529] Magic number: 14:681:877
[ 0.446613] rtc_cmos 00:03: setting system clock to 2014-05-20 08:51:33 UTC (1400575893)
[ 0.446705] PM: Hibernation image not present or could not be loaded.
[ 0.447929] Freeing unused kernel memory: 1120K (ffffffff818d8000 - ffffffff819f0000)
[ 0.447931] Write protecting the kernel read-only data: 8192k
[ 0.450553] Freeing unused kernel memory: 904K (ffff88000151e000 - ffff880001600000)
[ 0.451721] Freeing unused kernel memory: 416K (ffff880001798000 - ffff880001800000)
[ 0.458667] random: systemd-tmpfile urandom read with 2 bits of entropy available
[ 0.460077] systemd-udevd[47]: starting version 212
[ 0.478236] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 0.489263] ACPI: bus type USB registered
[ 0.489293] usbcore: registered new interface driver usbfs
[ 0.489304] usbcore: registered new interface driver hub
[ 0.494274] sdhci: Secure Digital Host Controller Interface driver
[ 0.494278] sdhci: Copyright(c) Pierre Ossman
[ 0.494499] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0)
[ 0.494708] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA
[ 0.494739] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
[ 0.494796] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[ 0.499195] usbcore: registered new device driver usb
[ 0.499671] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.499940] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.500201] ehci-pci: EHCI PCI platform driver
[ 0.500769] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.500777] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.500786] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.500808] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000080e0
[ 0.501200] hub 1-0:1.0: USB hub found
[ 0.501209] hub 1-0:1.0: 2 ports detected
[ 0.501580] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.501587] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 0.501593] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.501626] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000080c0
[ 0.503178] SCSI subsystem initialized
[ 0.503409] hub 2-0:1.0: USB hub found
[ 0.503419] hub 2-0:1.0: 2 ports detected
[ 0.503907] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.503914] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 0.503929] ehci-pci 0000:00:1a.7: debug port 1
[ 0.507842] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.507859] ehci-pci 0000:00:1a.7: irq 19, io mem 0xdd005c00
[ 0.508093] libata version 3.00 loaded.
[ 0.508752] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.508793] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.513351] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.513563] hub 3-0:1.0: USB hub found
[ 0.513629] hub 3-0:1.0: 4 ports detected
[ 0.536813] hub 1-0:1.0: USB hub found
[ 0.536828] hub 1-0:1.0: 2 ports detected
[ 0.556530] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.560059] hub 2-0:1.0: USB hub found
[ 0.560067] hub 2-0:1.0: 2 ports detected
[ 0.560345] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.560352] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 0.560366] ehci-pci 0000:00:1d.7: debug port 1
[ 0.563401] firewire_ohci 0000:06:00.0: added OHCI v1.10 device as card 0, 4 IR + 0 IT contexts, quirks 0x10
[ 0.568179] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.568198] ehci-pci 0000:00:1d.7: irq 20, io mem 0xdd005800
[ 0.576683] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.576856] hub 4-0:1.0: USB hub found
[ 0.576865] hub 4-0:1.0: 8 ports detected
[ 0.577213] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.577220] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.577228] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.577249] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000080a0
[ 0.577420] hub 5-0:1.0: USB hub found
[ 0.577429] hub 5-0:1.0: 2 ports detected
[ 0.577678] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.577684] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.577691] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.577712] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008080
[ 0.577877] hub 6-0:1.0: USB hub found
[ 0.577885] hub 6-0:1.0: 2 ports detected
[ 0.578124] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.578130] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.578136] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.578156] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00008060
[ 0.578323] hub 7-0:1.0: USB hub found
[ 0.578331] hub 7-0:1.0: 2 ports detected
[ 0.578566] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.578573] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 0.578579] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.578609] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00008040
[ 0.578778] hub 8-0:1.0: USB hub found
[ 0.578786] hub 8-0:1.0: 2 ports detected
[ 0.579138] ahci 0000:00:1f.2: version 3.0
[ 0.579314] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 0.579386] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 0.579390] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc ems sxs
[ 0.597458] scsi0 : ahci
[ 0.597577] scsi1 : ahci
[ 0.597688] scsi2 : ahci
[ 0.597787] scsi3 : ahci
[ 0.597890] scsi4 : ahci
[ 0.597988] scsi5 : ahci
[ 0.598049] ata1: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005100 irq 46
[ 0.598053] ata2: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005180 irq 46
[ 0.598054] ata3: DUMMY
[ 0.598056] ata4: DUMMY
[ 0.598058] ata5: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005300 irq 46
[ 0.598060] ata6: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005380 irq 46
[ 0.916700] ata6: SATA link down (SStatus 0 SControl 300)
[ 0.916718] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.063421] firewire_core 0000:06:00.0: created device fw0: GUID 0000000000000000, S400
[ 1.083353] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.083369] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.083987] ata1.00: ATA-8: TOSHIBA MK5055GSX, FG002C, max UDMA/100
[ 1.083990] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.084680] ata1.00: configured for UDMA/100
[ 1.084792] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK5055GS FG00 PQ: 0 ANSI: 5
[ 1.087088] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50L, SC04, max UDMA/100
[ 1.092125] ata2.00: configured for UDMA/100
[ 1.113361] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 1.203938] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50L SC04 PQ: 0 ANSI: 5
[ 1.208648] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.208739] sd 0:0:0:0: [sda] Write Protect is off
[ 1.208743] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.208779] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.290173] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.323084] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.323088] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.323226] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.325332] usbcore: registered new interface driver usbhid
[ 1.325335] usbhid: USB HID core driver
[ 1.325918] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0/0003:045E:0750.0001/input/input2
[ 1.326088] hid-generic 0003:045E:0750.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:1a.1-2/input0
[ 1.336169] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.1/0003:045E:0750.0002/input/input3
[ 1.336217] hid-generic 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:1a.1-2/input1
[ 1.418377] sda: sda1 sda2
[ 1.418731] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.426688] tsc: Refined TSC clocksource calibration: 2394.269 MHz
[ 1.446699] usb 4-4: new high-speed USB device number 3 using ehci-pci
[ 2.115101] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.200031] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 2.385422] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/0003:046D:C05A.0003/input/input4
[ 2.385472] hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 2.426729] Switched to clocksource tsc
[ 2.490018] usb 7-2: new full-speed USB device number 2 using uhci_hcd
[ 2.502963] random: nonblocking pool is initialized
[ 2.721320] systemd[1]: systemd 212 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 2.721454] systemd[1]: Detected architecture 'x86-64'.
[ 2.739429] systemd[1]: Set hostname to <arch>.
[ 3.632105] systemd[1]: Configuration file /etc/systemd/system/netctl@my\x2dnetwork.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[ 3.755410] systemd[1]: Starting Login Prompts.
[ 3.755928] systemd[1]: Reached target Login Prompts.
[ 3.755939] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.755992] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.756002] systemd[1]: Starting Remote File Systems.
[ 3.756478] systemd[1]: Reached target Remote File Systems.
[ 3.756488] systemd[1]: Expecting device sys-subsystem-net-devices-wlan0.device...
[ 3.756839] systemd[1]: Starting Encrypted Volumes.
[ 3.757313] systemd[1]: Reached target Encrypted Volumes.
[ 3.757330] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.757364] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.757373] systemd[1]: Starting Paths.
[ 3.757845] systemd[1]: Reached target Paths.
[ 3.757866] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.758419] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.758432] systemd[1]: Starting Swap.
[ 3.758902] systemd[1]: Reached target Swap.
[ 3.758913] systemd[1]: Expecting device dev-disk-by\x2duuid-3e31eb5f\x2d326a\x2d4cd0\x2daab3\x2d7d1e7ac0797b.device...
[ 3.759249] systemd[1]: Starting Root Slice.
[ 3.766515] systemd[1]: Created slice Root Slice.
[ 3.766527] systemd[1]: Starting User and Session Slice.
[ 3.767173] systemd[1]: Created slice User and Session Slice.
[ 3.767184] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.767681] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.767691] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.768180] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.768189] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.768677] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.768687] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.769176] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.769189] systemd[1]: Starting udev Control Socket.
[ 3.769676] systemd[1]: Listening on udev Control Socket.
[ 3.769688] systemd[1]: Starting udev Kernel Socket.
[ 3.770181] systemd[1]: Listening on udev Kernel Socket.
[ 3.770192] systemd[1]: Starting Journal Socket.
[ 3.770700] systemd[1]: Listening on Journal Socket.
[ 3.770716] systemd[1]: Starting System Slice.
[ 3.771341] systemd[1]: Created slice System Slice.
[ 3.771357] systemd[1]: Started File System Check on Root Device.
[ 3.771365] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 3.772001] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.772011] systemd[1]: Mounting Temporary Directory...
[ 3.790231] systemd[1]: Starting system-netctl.slice.
[ 3.790914] systemd[1]: Created slice system-netctl.slice.
[ 3.790930] systemd[1]: Starting system-getty.slice.
[ 3.791567] systemd[1]: Created slice system-getty.slice.
[ 3.809849] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.852492] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.876658] systemd[1]: Starting Apply Kernel Variables...
[ 3.877416] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.878150] systemd[1]: Mounting Huge Pages File System...
[ 3.878884] systemd[1]: Starting udev Coldplug all Devices...
[ 3.879636] systemd[1]: Starting Setup Virtual Console...
[ 3.880782] systemd[1]: Started Load Kernel Modules.
[ 3.880820] systemd[1]: Mounting Configuration File System...
[ 3.881579] systemd[1]: Mounting Debug File System...
[ 3.882319] systemd[1]: Mounted FUSE Control File System.
[ 3.882346] systemd[1]: Starting Journal Service...
[ 3.883635] systemd[1]: Started Journal Service.
[ 4.312288] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 4.431925] systemd-udevd[146]: starting version 212
[ 5.513427] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 5.513433] ACPI: Power Button [PWRB]
[ 5.513493] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
[ 5.513777] ACPI: Lid Switch [LID0]
[ 5.513831] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
[ 5.513834] ACPI: Sleep Button [SLPB]
[ 5.513911] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 5.513914] ACPI: Power Button [PWRF]
[ 5.596907] ACPI: AC Adapter [ACAD] (on-line)
[ 5.645033] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 5.657955] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 5.661096] acpi device:08: registered as cooling_device0
[ 5.663657] acpi device:0a: registered as cooling_device1
[ 5.663725] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input9
[ 5.708497] hp_accel: laptop model unknown, using default axes configuration
[ 5.720053] lis3lv02d: 8 bits sensor found
[ 5.729279] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.791571] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xc0
[ 5.791574] ene_ir: PLL freq = 1406
[ 5.791575] ene_ir: KB3926C detected
[ 5.791586] ene_ir: Firmware regs: 00 00
[ 5.791587] ene_ir: Hardware features:
[ 5.791589] ene_ir: * Uses GPIO 40 for IR demodulated input
[ 5.821208] Monitor-Mwait will be used to enter C-1 state
[ 5.821217] Monitor-Mwait will be used to enter C-2 state
[ 5.821221] Monitor-Mwait will be used to enter C-3 state
[ 5.821225] tsc: Marking TSC unstable due to TSC halts in idle
[ 5.821242] ACPI: acpi_idle registered with cpuidle
[ 5.821270] Switched to clocksource hpet
[ 5.827916] Registered IR keymap rc-rc6-mce
[ 5.828003] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input10
[ 5.828066] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[ 5.840895] ene_ir: driver has been successfully loaded
[ 5.848018] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 5.877265] IR JVC protocol handler initialized
[ 5.878491] IR NEC protocol handler initialized
[ 5.879175] IR RC6 protocol handler initialized
[ 5.880281] IR RC5(x) protocol handler initialized
[ 5.880739] IR SANYO protocol handler initialized
[ 5.881059] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input12
[ 5.881065] IR MCE Keyboard/mouse protocol handler initialized
[ 5.881065] IR Sony protocol handler initialized
[ 5.881758] lirc_dev: IR Remote Control driver registered, major 249
[ 5.882267] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[ 5.882270] IR LIRC bridge handler initialized
[ 5.891466] [Firmware Bug]: Invalid critical threshold (0)
[ 5.892123] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.892126] ACPI: Thermal Zone [TZ01] (31 C)
[ 5.903447] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input13
[ 5.903835] wmi: Mapper loaded
[ 5.927466] ACPI: Battery Slot [BAT0] (battery present)
[ 6.029419] [drm] Initialized drm 1.1.0 20060810
[ 6.114983] cfg80211: Calling CRDA to update world regulatory domain
[ 6.137776] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMBA) (20131218/utaddress-258)
[ 6.137785] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.137789] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000050f (\GPIO) (20131218/utaddress-258)
[ 6.137793] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.137822] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.180252] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 6.180255] Copyright(c) 2003- 2014 Intel Corporation
[ 6.180475] iwlwifi 0000:02:00.0: irq 48 for MSI/MSI-X
[ 6.287693] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.287960] r8169 0000:03:00.0: irq 49 for MSI/MSI-X
[ 6.288149] r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffc9000584a000, 00:00:00:00:00:00, XID 1c4000c0 IRQ 49
[ 6.288152] r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 6.345229] mousedev: PS/2 mouse device common for all mice
[ 6.436120] ACPI Warning: SystemIO range 0x0000000000008000-0x000000000000801f conflicts with OpRegion 0x0000000000008000-0x000000000000800f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
[ 6.436128] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.526671] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
[ 6.535077] media: Linux media interface: v0.10
[ 6.569608] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
[ 6.569745] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.570548] input: HDA Intel HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 6.570639] input: HDA Intel Front Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 6.570714] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 6.581760] input: PC Speaker as /devices/platform/pcspkr/input/input18
[ 6.599116] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
[ 6.683172] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 6.683177] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 6.683179] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 6.683182] iwlwifi 0000:02:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 6.683232] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 6.701985] Linux video capture interface: v2.00
[ 6.780556] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 6.922833] nvidia: module license 'NVIDIA' taints kernel.
[ 6.922839] Disabling lock debugging due to kernel taint
[ 6.939605] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 6.939882] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[ 6.939892] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 337.12 Fri Apr 4 14:51:15 PDT 2014
[ 6.991292] iTCO_vendor_support: vendor-support=0
[ 6.991687] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 6.991726] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 6.991831] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.064547] input: HP WMI hotkeys as /devices/virtual/input/input19
[ 7.066862] systemd-udevd[153]: renamed network interface eth0 to enp3s0
[ 7.089277] Bluetooth: Core ver 2.18
[ 7.089304] NET: Registered protocol family 31
[ 7.089306] Bluetooth: HCI device and connection manager initialized
[ 7.089316] Bluetooth: HCI socket layer initialized
[ 7.089319] Bluetooth: L2CAP socket layer initialized
[ 7.089331] Bluetooth: SCO socket layer initialized
[ 7.097641] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 7.119889] uvcvideo: Found UVC 1.00 device HP Webcam (05c8:010f)
[ 7.125560] usbcore: registered new interface driver btusb
[ 7.136432] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/input/input20
[ 7.136523] usbcore: registered new interface driver uvcvideo
[ 7.136525] USB Video Class driver (1.1.1)
[ 7.162108] kvm: disabled by bios
[ 7.167498] systemd-udevd[149]: renamed network interface wlan0 to wlp2s0
[ 7.515656] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0, board id: 3655, fw id: 428212
[ 7.594362] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input14
[ 7.949749] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.055002] systemd-journald[127]: Received request to flush runtime journal from PID 1
[ 13.835532] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 13.838466] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 13.935096] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 13.938046] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 13.964225] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 14.845976] nvidia 0000:01:00.0: irq 50 for MSI/MSI-X
[ 20.903153] wlp2s0: authenticate with b8:c7:5d:02:3b:9d
[ 20.906517] wlp2s0: send auth to b8:c7:5d:02:3b:9d (try 1/3)
[ 20.909113] wlp2s0: authenticated
[ 20.910074] wlp2s0: associate with b8:c7:5d:02:3b:9d (try 1/3)
[ 20.913437] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9d (capab=0x1431 status=0 aid=7)
[ 20.918955] wlp2s0: associated
[ 20.919008] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 21.089546] wlp2s0: deauthenticating from b8:c7:5d:02:3b:9d by local choice (reason=2)
[ 21.096263] wlp2s0: authenticate with b8:c7:5d:02:3b:9d
[ 21.099042] wlp2s0: send auth to b8:c7:5d:02:3b:9d (try 1/3)
[ 21.099780] cfg80211: Calling CRDA for country: AT
[ 21.101974] wlp2s0: authenticated
[ 21.103555] wlp2s0: associate with b8:c7:5d:02:3b:9d (try 1/3)
[ 21.108457] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9d (capab=0x1431 status=0 aid=7)
[ 21.115231] wlp2s0: associated
[ 26.591580] fuse init (API version 7.22)
[ 148.105211] wlp2s0: authenticate with b8:c7:5d:02:3b:9e
[ 148.107797] wlp2s0: direct probe to b8:c7:5d:02:3b:9e (try 1/3)
[ 148.108518] cfg80211: Calling CRDA to update world regulatory domain
[ 148.310034] wlp2s0: direct probe to b8:c7:5d:02:3b:9e (try 2/3)
[ 148.513366] wlp2s0: send auth to b8:c7:5d:02:3b:9e (try 3/3)
[ 148.514272] wlp2s0: authenticated
[ 148.516865] wlp2s0: associate with b8:c7:5d:02:3b:9e (try 1/3)
[ 148.517652] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9e (capab=0x1511 status=0 aid=4)
[ 148.519034] wlp2s0: associated
[ 148.531940] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by b8:c7:5d:02:3b:9e
[ 231.077026] wlp2s0: authenticate with b8:c7:5d:02:3b:9d
[ 231.080206] wlp2s0: send auth to b8:c7:5d:02:3b:9d (try 1/3)
[ 231.081422] cfg80211: Calling CRDA to update world regulatory domain
[ 231.082756] wlp2s0: authenticated
[ 231.083955] wlp2s0: waiting for beacon from b8:c7:5d:02:3b:9d
[ 231.362261] wlp2s0: authenticate with b8:c7:5d:02:3b:9e
[ 231.365917] wlp2s0: send auth to b8:c7:5d:02:3b:9e (try 1/3)
[ 231.380479] wlp2s0: authenticated
[ 231.383400] wlp2s0: associate with b8:c7:5d:02:3b:9e (try 1/3)
[ 231.386425] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9e (capab=0x1511 status=0 aid=4)
[ 231.390072] wlp2s0: associated
[ 231.481241] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by b8:c7:5d:02:3b:9e
[ 311.833862] perf samples too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
[ 3074.285425] Watchdog[977]: segfault at 0 ip 00007f42693ed9b8 sp 00007f4251f777d0 error 6 in chromium[7f4265a4e000+55d7000]
[ 3166.859073] chromium[1212]: segfault at 39 ip 00007f7ddd6a7280 sp 00007fff9d984088 error 6 in chromium[7f7ddcefc000+55d7000]
[ 3172.385333] chromium[1169]: segfault at fbadbeef ip 00007f7ddf63345d sp 00007fff9d983f20 error 6 in chromium[7f7ddcefc000+55d7000] -
Randomly Freezing and Running Hot
Hi all,
So my MBP mid-2009 seems to randomly freeze without warning and after no particular operation or amount of time. It could be idling with no programs open or be under heavy use and can take anywhere from 15 minutes to over an hour, but it is guaranteed to freeze up and require a hard shutdown. I've been running Mavericks since late 2013 and have only had this problem recently (about the past 3 weeks). I've tried many little things but nothing too drastic (like disabling the hard disk sleep option and the Google Drive "show file sync status" option). I have an SSD and a 500GB HDD installed and am running rEFIt because I have 3 bootable partitions (2 were originally clones of OS X and the other is Windows 8 BOOTCAMP). I have noticed that the CPU is running much hotter than it should ( >80C with no load and the fan doesn't seem to spin up until it hits about 87C unless I use SMCFanControl).
Anyway I downloaded and ran EtreCheck and have pasted the output below. I know I'm a little heavy on the RAM usage, but that shouldn't cause this kind of instability. Also I'm not 100% sure (because activity moniter freezes up when I get the beachball), but it seems like Finder and Safari are the culprits of the crash.
Let me know if you need anymore info and thanks for your time!
Hardware Information:
MacBook Pro (13-inch, Mid 2009)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:15:26
Disk Information:
M4-CT128M4SSD2 disk0 : (128.04 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
macSSD (disk0s2) / [Startup]: 96.48 GB (27.04 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) <not mounted>: 30.69 GB
ST9500325AS disk1 : (500.11 GB)
EFI (disk1s1) <not mounted>: 209.7 MB
Storage (disk1s2) /Volumes/Storage: 399.81 GB (96.63 GB free)
notSSD (disk1s3) /Volumes/notSSD: 99.3 GB (91.78 GB free)
USB Information:
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
se.coolbook.driver2 (2.0.9)
Startup Items:
rEFItBlesser: Path: /Library/StartupItems/rEFItBlesser
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.bjango.istatserver.plist 3rd-Party support link
[System] com.bombich.ccc.plist 3rd-Party support link
[System] com.google.keystone.daemon.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] gpsd.plist 3rd-Party support link
[System] org.eyebeam.SelfControl.plist 3rd-Party support link
[System] org.macosforge.xquartz.privileged_startx.plist 3rd-Party support link
Launch Agents:
[System] com.google.keystone.agent.plist 3rd-Party support link
[System] com.hp.messagecenter.launcher.plist 3rd-Party support link
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
[System] org.macosforge.xquartz.startx.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[not loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
[not loaded] com.google.GoogleContactSyncAgent.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac.helperTool.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac.volumeWatcher.plist 3rd-Party support link
[not loaded] com.netputing.airprintactivator.plist 3rd-Party support link
[not loaded] com.valvesoftware.steamclean.plist 3rd-Party support link
User Login Items:
Google Drive
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
Loki: Version: 3.0 3rd-Party support link
Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
o1dbrowserplugin: Version: 5.1.7.17873 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 3rd-Party support link
googletalkbrowserplugin: Version: 5.1.7.17873 3rd-Party support link
Mathematica: Version: 9.0.1.4055068 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Safari Extensions:
Evernote Web Clipper: Version: 6.1
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
fbplugin_1_0_3: Version: (null) 3rd-Party support link
3rd Party Preference Panes:
BassJump 3rd-Party support link
Fan Control 3rd-Party support link
Flash Player 3rd-Party support link
Flip4Mac WMV 3rd-Party support link
Growl 3rd-Party support link
Java 3rd-Party support link
SynergyKM 3rd-Party support link
teleport 3rd-Party support link
TeXDistPrefPane 3rd-Party support link
Old Applications:
Microsoft Language Register: Version: 14.2.3 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
AirPrintDaemon: Version: 1.0b5 - SDK 10.0 3rd-Party support link
/Users/[redacted]/Library/Application Support/AirPrintActivator/AirPrintDaemon.app
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.2.3 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.2.3 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.2.3 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.2.3 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.2.3 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office
Open XML for Excel: Version: 14.2.3 - SDK 10.5 3rd-Party support link
Microsoft Office Setup Assistant: Version: 14.2.0 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.2.3 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.2.3 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.2.3 - SDK 10.5 3rd-Party support link
Microsoft Graph: Version: 14.2.3 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.2.3 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.2.3 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.2.3 - SDK 10.5 3rd-Party support link
My Day: Version: 14.2.3 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.2.3 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.2.3 - SDK 10.5 3rd-Party support link
Rivet: Version: 2.8.0 - SDK 10.5 3rd-Party support link
/Applications/TeX
BibDesk: Version: 1.5.9 - SDK 10.5 3rd-Party support link
LaTeXiT: Version: 2.5.0 - SDK 10.5 3rd-Party support link
Microsoft AutoUpdate: Version: 2.3.5 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.8 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.3 - SDK 10.4 3rd-Party support link
Time Machine:
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
macSSD: Disk size: 89.86 GB Disk used: 64.67 GB
Destinations:
Time Machine [Local]
Total size: 232.83 GB
Total number of backups: 25
Oldest backup: 2013-01-03 19:27:22 +0000
Last backup: 2014-03-17 04:52:14 +0000
Size of backup disk: Adequate
Backup size 232.83 GB > (Disk used 64.67 GB X 3)
notSSD [Local] (Last used)
Total size: 92.48 GB
Total number of backups: (null)
Size of backup disk: Too small
Backup size 92.48 GB < (Disk used 64.67 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
24% backupd
17% WindowServer
6% com.apple.WebKit.Networking
4% Activity Monitor
4% mds
Top Processes by Memory:
238 MB com.apple.IconServicesAgent
188 MB mds_stores
74 MB PluginProcess
74 MB Safari
70 MB Google Drive
Virtual Memory Information:
92 MB Free RAM
1.63 GB Active RAM
1.56 GB Inactive RAM
472 MB Wired RAM
908 MB Page-ins
0 B Page-outsThanks, I'm notorious for not updating things.
I think I may have found the solution, my Crucial M4 was on firmware 0009, the latest is 070H. Apparently the 0309 update fixed a freezing issue:
http://www.tomshardware.com/news/Crucial-m4-Firmware-BSOD,14544.html
Did the update to the latest, seems quicker already. Will know within a couple of hours if it worked or not.
Cheers! -
Qosmio F60- Randomly freezes for about one second
Hi,
I have a qosmio F60, and recently i've been having random freezes even while typing atm.
So, my notebook freezes for a second every now and then and it's getting really annoying. It does so no matter what i'm doing...
I restored the pc to factory settings and updated all the drivers but still i get this annoying problem...
Any help would be appreciated.
I figured the problem is a *SUDDEN FPS DROP*...save me -.- pls
Message was edited by: ralph_af> I restored the pc to factory settings and updated all the drivers but still i get this annoying problem...
Hmmm..... why to update ALL drivers if you dont know why this happen?
You must restore notebook to factory settings, open notepad and test it. can you confirm that this happen immediately after notebook restore to factory settings?
It is not easy to assist with such issues. We dont know which stuff is installed on your notebook, which additional (third part software) applications are installed, which background processes are active, how your OS is configured and so on.
In my opinion some background activity is responsible for this. it can be Microsoft updates installation if you have set it to option automatically. It can also be some antivirus scanning activities. Who knows?
Try to change OS settings and OS configuration. -
Suddenly, a series of random freeze :
1/ Dialing a number, any number, receives a message : "call impossible"
Solution : had to reboot
2/ After a call, my correspondent ended conversation, and my screen being black, I had to push button to light it back. Problem is I couldn't end the call on my part.
Solution : had to go in contacts, dial another call, and put an end to it, to finally unblock the screen.Did you add a new program just before it began. The need to trouble shoot the phone asw you would your computer. Try restoring from and older backup.
Maybe you are looking for
-
A wierd Crash on Mac OS 10.4.11
i am not sure if i am in the right discussion forum or not so i am very sorry if this is not the right forum to post such question. We have developed an application for a client using C++ and (Qt Framework) and a set of other libraries included in th
-
Hi, I have a project where I don't want the playbar on the first slide where is the title of the course and the Company logo. I use the Variables feature of Cp to show/hide playbar. But when I launch the preview or the output file .exe the playbar a
-
Tables and Columns used in Universe (BO 6.5)
Hi All, Please help me out with the below queries: 1. Is there any automated way to find out which report is using which universe? (may be through a SQL fired in BO repository) (Note: As per the BO Documentation, OBJ_X_DOCUMENTS This is the only tabl
-
I have both Lightroom and Photoshop on my PC laptop. Well now I am in the market to buy a MAC, but do I have to buy new softwear again or is there any way to instal it on to a MAC?
-
Dear All, When we mapped a table control to the data base table the standard f4 help for the fields is automatically comes for the respective fields in the table control. Now my requirement is to make my own F4 help for the field in a table control.