CRVS2010 Beta - Cannot find documentation on what needs to be installed

My question is very elementary but I do not see anything in the release notes, etc. that tells me which of the 3 install files I need to iinstall or do I need to install all of them.
1 - SAP Crystal Reports, version for Visual Studio 2010
2 - SAP Crystal Reports runtime engine for .NET Framework 4 (32-bit)
3 - SAP Crystal Reports runtime engine for .NET Framework 4 (64-bit)
I want access to the WPF component in VS 2010 on a Win 7 64bit machine
Do I install all 3?? In what order? 1 - 2 - 3 as I've shown?
I have Crystal 2008 installed on my machine. Must I uninstall it to use the Crystal VS 2010 beta on that machine.
To date I tried installing just #1 above. I went into my VS 2010 selected the WPF and it blew up VS 2010, I tried doing the same with Winform and it also took out VS 2010.
I have since uninstalled everything. Could someone explain the procedure(s) for making the beta available to VS 2010 with a little more detail.
Thanks

Hi,
You might want to check this [thread|Re: CRVS2010 Beta - about downloading file].
Thanks,
Saurabh

Similar Messages

How do i find out what my serial number is? I cannot find the software and need to put it on a new computer. How do I do this?

I cannot find the software and need to put it on a new computer. How do I do this? I do not remember where the software is yet it is on my computer along with Photoshop CS6 extended. I have that disk but cant find anything else.

gr8gear,
You can see (only) part of the registration number under Help>About Illustrator.
If you have registered it with Adobe (optional up to CS4), you should be able to see it on your products page
https://www.adobe.com/account/my-products-services.html
Otherwise, you may ask in a chat here (depending on version):
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
Serial number and activation support (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service1.html

I cannot add a Wi-Fi guest network. Gone to Utilities Airport Utilities and all get is an image/browser of my Airport Extreme. Looking for the browser which has the title Wireless but cannot find anywhere. I need help?

I cannot add a Wi-Fi guest network. Gone to Utilities>Airport Utilities and all I get is an image/browser of my Airport Extreme. Looking for the browser window which has the title Wireless but cannot find anywhere. What am I doing wrong?

Open AirPort Utility. The first screen looks something like this:
Click on the AirPort Extreme and another screen will appear. Click Edit, then the window with the Wireless tab will appear.
If you do not see these screens, you will need to start over and configure your AirPort again.

I bot a TV series from Appstore, erased it from iTunes as I believed it was in iCloud. I cannot find it. What do I do???

I bot a TV series from Appstore, erased it from iTunes as I believed it was in iCloud. I cannot find it. What do I do???

Your TV episodes did not come from the App Store, but from the iTunes Store.
Log into iTunes Store, then check your Purchases.

Cannot Find Documentation for DAQmxSetTrigAttribute

Dear all,
The example program that comes with NIDAQmx (DigPulseTrain-Cont-PauseTrig) uses a function called DAQmxSetTrigAttribute but I cannot find any documentation on the use of this function or any of the others in the same block within the NIDAQmx.h header file:
The example program contains the following lines:
DAQmxErrChk (DAQmxSetTrigAttribute(*taskHandle,DAQmx_PauseTrig_Type,DAQmx_Val_DigLvl));
DAQmxErrChk (DAQmxSetTrigAttribute(*taskHandle,DAQmx_DigLvl_PauseTrig_Src,triggerSource));
DAQmxErrChk (DAQmxSetTrigAttribute (*taskHandle, DAQmx_DigLvl_PauseTrig_When,pauseWhen));
And the NIDAQmx.h header file contains these function definitions:
int32 DllExport __CFUNC_C DAQmxGetTrigAttribute (TaskHandle taskHandle, int32 attribute, void *value, ...);
int32 DllExport __CFUNC_C DAQmxSetTrigAttribute (TaskHandle taskHandle, int32 attribute, ...);
int32 DllExport __CFUNC DAQmxResetTrigAttribute (TaskHandle taskHandle, int32 attribute);
Does anybody know what the different parameters are and how to use these functions?
Regards
Martin Dale

The attribute ids that are valid for the DAQmxSetTriggAttribute() are in the NIDAQmx.h file can be found under the heading
"//********** Trigger Attributes **********"
These include attributes for start, reference, pause, and arm start triggers.
I hope this helps!
gus....

Cannot find documentation for MRCA

Now that the new MRCA tool version 10.1.2.0.3 is available where is the documentation for it? I have only been able to find docs that were last updated in August. I'm going to install in a 10.2.0.1 db and I need the pre-install info.
Thanks,
Denise

Hi Denise,
The information in the August versions of the RepCA guides applies to the
10.1.2.0.3 version of RepCA:
Oracle® Application Server Metadata Repository Creation Assistant User's Guide
10g Release 2 (10.1.2) for UNIX
B14129-03
Oracle® Application Server Metadata Repository Creation Assistant User's Guide
10g Release 2 (10.1.2) for Microsoft Windows
B14130-03
There are 3 updates/caveats having to do with running 10.1.2.0.3 RepCA on
a 10.2 database. These will be in the January version of the 10.1.2 release
notes which will be posted on OTN soon. In the meantime, I have cut and
pasted them below.
We are working on a better way to coordinate certification updates with the
release notes.
Thanks!
Beth
3.1.17 Oracle Ultra Search Required (Oracle Database 10g Release 2 (10.2.x) only)
If you plan to install the OracleAS Metadata Repository on Oracle Database 10g Release 2 (10.2.x), then you must install Oracle Ultra Search on the database.
OracleAS Metadata Repository Creation Assistant checks if your database contains the WKSYS and WKPROXY schema. If your database does not contain them, OracleAS Metadata Repository Creation Assistant displays the following warning:
"The Database does not contain Ultra Search Schemas WKSYS and/or WKPROXY. Please install them and try again. Refer to the Database Install Guide and Ultra Search User Guide for more information."
If your database does not have Oracle Ultra Search installed, you can install it from the Oracle Database 10g Companion CD-ROM. See the Oracle Database Companion CD Installation Guide for details.
After installing Oracle Ultra Search, you need to load the schemas onto the database using the Database Configuration Assistant (DBCA). Refer to Oracle MetaLink (http://www.metalink.oracle.com) Note.337992.1 for loading Ultra Search schemas.
3.1.18 Patch Required Prior to Running the Metadata Repository Creation Assistant on a 10.2 Real Application Cluster Database
You must install ARU patch 7993184 before running the Metadata Repository Creation Assistant on a 10.2 Real Application Cluster Database. If you do not apply the patch, you will receive an error message during Oracle Ultra Search configuration.
To apply the patch:
Install the 10.2 Real Application Cluster database.
Create the database using the DBCA or during the installation.
Stop all Oracle Processes.
Install Oracle Ultra Search in the same Oracle home from the companion CD.
Apply ARU patch 7993184. Go to Oracle MetaLink (http://www.metalink.oracle.com) to obtain the ARU patch.
Invoke the DBCA to configure Oracle Ultra Search.
Run the Metadata Repository Creation Assistant.
3.1.19 Populate DB_DOMAIN Before Running Oracle Metadata Repository Creation Assistant on an Oracle 10.2 Database
The default installation option for Oracle Database 10g (Release 2) 10.2 does not populate the DB_DOMAIN. The OracleAS Metadata Repository Creation Assistant uses the value of DB_DOMAIN to construct the Oracle Application Server farm name as $SID.$DB_DOMAIN. You should ensure that the DB_DOMAIN is populated in the database with a valid value prior to running OracleAS Metadata Repository Creation Assistant. Failure to do will result in the default farm name of REGRESS.RDBMS.DEV.US.ORACLE.COM.

CRVS2010 Beta - Cannot export report to PDF with unicode characters

My report has some unicode data (Chinese), it can be previewed properly in the windows form report viewer. However, if I export the report document to PDF file, the unicode characters in exported file are all displayed as a square.
In the version of Crystal Report 2008 R2, it can export the Chinese characters to PDF when I select a Chinese font in report. But VS2010 beta cannot export the Chinese characters even a Chinese font is selected.

Barry, what is the specific font you are using?
The below is a reformatted response from Program Management:
Using non-Chinese font with Unicode characters (Chinese) the issue is reproducible when using Arial font in Unicode characters field. After changing the Unicode character to Simsun (A Chinese font named 宋体 in report), the problem is solved in Cortez and CR both.
Ludek

LV2010 SP1 Installer Build Issue- Cannot find the file it need on requesyed disk

I am migrating a project from LV8.6.1 to 2010SP1 and had issues building the installer that I was finally able to overcome, but something is amiss with the process.
Brand new development PC, running XP SP3, fresh install of LV2010SP Dev Suite and also installed VDM2010 SP1 (even though the project does not use any vision modules).
-          Copied 8.6.1 project to the PC, did a mass compile of it and built the exe from scratch without issues.
-          Now it’s time to build the installer from scratch. Additional Installers were:
LV2010 RTE, MAX 4.7, NI-DAQmx Full App Devel Support 9.2.3, and NI-VISA 5.03.
-          Get the message that it will need some disks to build it which I have on hand:
Dev Suite DVD#2, Drivers DVD, and VDM DVD (huh, why VDM?)
-          The installer build progresses through the first two disks fine but will not find the files it needs on the VDM DVD (it is looking for “NI System Components”).
-          Installer build bails out with a message box and no installer is created (1st attachment). The installer logs are also attached.
-          Try the build process gain, same result.
-          Copied the VDM DVD to my hard drive and point it to that folder to get the files, same result.
-          Try again saying I don’t have the disks on hand. It lists some alternate disks to use but to get all the files it still wants the VDM DVD to complete it. Not much use, the build still fails.
-          Try one last time again selecting that I don’t have the disks on hand. I now notice that the folder the VDM was copied to on the hard drive is an option to select. Select that one and lo and behold the installer is built successfully.
So I guess it boils down to:
            - Why does it need the VDM DVD when there are no components of vision used?
            - Why can’t the installer find the files it needs on the VDM DVD or a copy of the DVD on the hard drive?
            - Why will it only work if I choose that I do not have the disks and point it to a copy of the DVD that resides on the hard drive?
-AK2DM
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~
Attachments:
MessageDuringVDMCopyForInstaller2010.JPG ‏127 KB
TowersSPCv225Installer_build.log ‏3126 KB
TowersSPCv225Installer_edit.log ‏915 KB

Che:
It gave no specific indication of what it was looking for, the only message that came up was in the screenshot jpg I originally posted.
The only other vague clue I had was it needed NI System Component from the VDM DVD.
Does not make sense that it required the VDM DVD since there were no vision components in the project. I presume it would have taken VISA off of the Dev Suite DVD's.
I can't replicate the problem since I had the build cache the system components required for the project. I'd rather not start deleting folders at this point since I have a viable installer at this time (after many hours of troublshooting expended).
Thanks
-AK2DM
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

HT201272 I made two software purchases back in early 2012 and they are not showing up in my purchase history. I want the software on my new laptop and I cannot find it. What do I do?

I'm not finding software I purchased in my purchase history. Can anyone help lead me to where to find it. I have the software on my IMac and want to install it on my new laptop. I cannot find it? Help!
Thanks,
Chad

If they are iOS apps and you are signed into your computer's iTunes with the same account that you originally bought them with then they should show in the Purchased link under Quicklinks on the right-hand side of the iTunes store home page.
If they are Mac apps bought from the Mac App Store and you are signed in with the same account, then they should show under the Purchases tab in the Mac App Store.

Cannot set up Time Machine because Airport Utility cannot find it. What do I do now?

Sorry, I meant to say Airport Utility cannot find Time Capsule. The TC is not listed as an available drive in the TM setings panel. Trying to set up a MBP. iMac TM settings panel lists TC but if I search for it from either machine, iMac or MBP it is not found. Repeated rescanning doesn't find it. Also trid Airport Utility from iPad and iPhone, still not found. When I first purchased it I set it all up so I have logged into it before. That was a couple of months ago, now I've got around to setting up TM I can't access it. It is continuing to provide my wireless network though.

OK, turned off all devices, pulled the plug out of the TC, waited then plugged back in. Started everything up again and Airport Utility can now find the TC.
Thanks to you both for trying to help. Next time I'll try this first but it didn't seem like a very elegant Apple solution to the problem.

I had icloud set up perfectly well on my vista operating system, but when it had to be reconfigured I lost my icloud and cannot find the version I need to set up again.

I had icloud set up to work perfectly between my vista PC, ipad and iphone. However when I had to have a service and reconfigure on my PC, I lost the connection with icloud and cannot find a download. Is there one available?

Go here: http://support.apple.com/kb/DL1687.

Error code 3150 - Cannot find output destination. Need help to resolve

I just installed a new router running DHCP and now I'm unable to reach my printer from all computers. The error code says "Cannot find output destination. Check the printer power connection, make sure the printer is switched on, and then try again.: -3150
The printer is obviously powered on and connected to the LAN. There is an apparent IP address problem, however, I can ping the IP that seems to be loaded in the printer.
I'm using Mac computers and I seem to have recurring IP issues with this printer.
Thanks for any help.

i am having the same issue as well.

What needs to be installed on a client machine?

Downloads Documentation Discussion Forums Articles Sample Code Training RSS Resources For
Oracle Data Provider for .NET FAQ
About ODP.NET
I am familiar with SQL Server's .NET data provider, but am new to Oracle. Is it easy to learn to use ODP.NET? (Last Updated: 12/27/04)
What are the different ways Oracle integrates with Microsoft .NET? (7/22/05)
Where can I find ODP.NET help and sample code? (12/12/03)
I have ODP.NET installed, but I can't find the ODP.NET Dynamic Help. Where is it? (4/11/05)
What are the new features in this version of ODP.NET? (7/22/05)
How do I make a feature enhancement request for ODP.NET? (12/04/02)
What features will ODP.NET support in future releases? (12/04/02)
Configuration and Certification
Do I need to install ODP.NET on my Oracle database server? (7/22/05)
Can ODP.NET work with Oracle8, Oracle8i, Oracle9i, and Oracle10g database (DB) servers? Can these DB servers be on Linux or Unix? (7/22/05)
Can ODP.NET be used with an Oracle8, Oracle8i, or Oracle9i Release 1 client? (11/02/04)
What do I need to have installed on my client machine to have ODP.NET work? (11/02/04)
Does ODP.NET support Windows Server 2003, .NET Framework 1.1, and Visual Studio .NET 2003? (11/02/04)
Common Runtime Issues
How do I use distributed transactions with ODP.NET? (3/20/03)
What if I have some applications that require an earlier Oracle client (e.g. using the Microsoft OLE DB Provider for Oracle with Server Explorer)? I want to be able to run both ODP.NET and these other applications from the same machine. (12/12/03)
I get an error: "Unable to load DLL (OraOps.dll)". How do I fix this? (4/23/04)
I want to use the Oracle9i Release 2 version of OraMTS with an Oracle8i database. I get a "No error information available: XACT_E_NOENLIST(0x8004D00A)" error when running an application using OraMTS. (12/04/02)
ODP.NET and Other Oracle Providers for .NET
Are ODP.NET and Microsoft .NET Framework Data Provider for Oracle the same product? (12/12/03)
Which .NET data access driver should I use among ODP.NET, Microsoft .NET Framework Data Provider for Oracle, OLE DB .NET, and ODBC .NET? (12/04/02)
I bundle ODP.NET with an application I've built, which I want to distribute or sell. Does Oracle charge licensing fees for this? (7/16/03)
Q: I am familiar with SQL Server's .NET data provider, but am new to Oracle. Is it easy to learn to use ODP.NET?
A: Yes. ODP.NET inherits from all the ADO.NET base classes, which is what SQL Server's .NET data provider, SqlClient, is based upon. The ADO.NET constructors, methods, and properties that you use with SQL Server will be the same with Oracle. For many applications, the only notable differences will be having all objects that were preceded with "Sql", such as SqlConnection, be preceded by "Oracle", such as OracleConnection, and accounting for differences between Oracle and SQL Server database data types, SQL, and stored procedure calls.
Q: What are the different ways Oracle integrates with Microsoft .NET?
A: Oracle integrates with .NET in a number of ways. For optimized .NET data access, ODP.NET enables access to all of the Oracle database's advanced features, such as RAC and XML DB, while ensuring the fastest performance from the .NET Framework.
For .NET development tools that make Oracle easier to use, the Oracle Developer Tools for Visual Studio .NET provide wizards and designers that auto-generate ODP.NET code and can browse and edit schemas and stored procedures. Additionally, it includes a Data Window to modify and view data and context-sensitive help.
Beginning with Oracle Database 10g Release 2, developers can build and deploy .NET stored procedures for their Oracle database.
For application integration, web services can facilitate integration between your existing Oracle and .NET applications.
Q: Where can I find ODP.NET help and sample code?
A: ODP.NET documentation is available from within Visual Studio .NET using Dynamic Help. Just hit the F1 key when your cursor is on an ODP.NET API and a help page for that API will appear right within Visual Studio .NET.
Additional ODP.NET documentation is available both locally installed and from the ODP.NET documentation page.
Sample code can be found both locally as part of the ODP.NET installation (e.g. c:\oracle\<Oracle Home Name>\ODP.NET\samples) and on ODP.NET samples page.
ODP.NET users can ask questions on the ODP.NET discussion forum.
Q: I have ODP.NET installed, but I can't find the ODP.NET Dynamic Help. Where is it?
A: This behavior sometimes occurs when installing new Visual Studio .NET versions over an ODP.NET installation. To enable ODP.NET Dynamic Help, go to Visual Studio .NET Combined Help Collection Manager located in Visual Studio .NET 2002 or Visual Studio .NET 2003. Make sure the box next to the Oracle Data Provider for .NET Help is checked and click on the Update VSCC button. Close Visual Studio .NET and re-open it to enable ODP.NET Dynamic Help.
Note: Because of security restrictions, you may need to copy and paste the links above to a browser, rather than clicking on them. Once copied to a local browser, if you have a Windows service pack that prevents active content (e.g. Windows XP service pack 2), you will need to allow active content to view the complete page. To do this, click on the yellow bar at the top of the Visual Studio .NET Combined Help Collection Manager page, which indicates active content has been blocked. Select "Allow Blocked Content". A security warning will show up. Click "Yes" and you will be able to view the page in its entirety, including having the option to incorporate the Oracle Data Provider for .NET Help into Visual Studio .NET.
Q: What are the new features in this version of ODP.NET?
A:
ODP.NET 10.2.0.1.0
Server-side ODP.NET for .NET stored procedures
RAC client-side connection load balancing and automatic connection cleanup
Database Change Notification
LOB and LONG retrieval - faster data retrieval, InitialLOBFetchSize can be up to 2GB, and full LOB functionality when InitialLOBFetchSize > 0 (i.e. GetOracleClob and GetOracleBlob methods are enabled). These same features are now enabled with LONGs with its respective APIs.
Connection Pool Management - explicitly clear connection pool(s)
Client Identifier property for supporting application context security, such as with VPD
Input REF Cursor parameters
ODP.NET 10.1.0.3.0
Statement caching
DeriveParameters - automatic population of stored procedure parameters
Cancel long running queries
ADO.Net 1.1 interfaces - HasRows and EnlistDistributedTransaction properties
LOB and LONG retrieval - Entire LOB and LONG column data can be retrieved even if the select list does not contain a primary key, ROWID, or unique key.
ODP.NET 10.1.0.2.0
Grid support
Schema-based XMLType
BINARY_FLOAT and BINARY_DOUBLE datatypes
Multiple Oracle Homes
ODP.NET 9.2.0.4.01
Improved XML DB and XMLType support
PL/SQL associative arrays
connection pool validation
InitialLOBFetchSize property to improve LOB retrieval performance
Q: How do I make a feature enhancement request for ODP.NET?
A: You can contact Oracle Support or use the ODP.NET discussion forum to make an enhancement request.
Q: What features will ODP.NET support in future releases?
A: In general, Oracle does not discuss features in future product releases until the release date nears. We are well aware of enhancement requests made through the ODP.NET discussion forum and Oracle support. We encourage Oracle users to continue to make their requests known. Oracle will do its best to fulfill these requests in future releases.
Q: Do I need to install ODP.NET on my Oracle database server?
A: No. You only need to install ODP.NET for running client or middle-tier .NET applications. The exception is if you are using .NET stored procedures in the database server. The server-side ODP.NET provider will automatically be installed with the Oracle Database Extensions for .NET.
Q: Can ODP.NET work with Oracle8, Oracle8i, Oracle9i, and Oracle10g database (DB) servers? Can these DB servers be on Linux or Unix?
A: Yes and yes. Oracle clients can support older and newer versions of the Oracle database. Consult the Oracle on Windows FAQ for more information.
Oracle clients on Windows can work with Oracle database servers on any platform.
Q: Can ODP.NET be used with an Oracle8, Oracle8i, or Oracle9i Release 1 client?
A: No. You need to use the Oracle9i Release 2 or higher client.
Q: What do I need to have installed on my client machine to have ODP.NET work?
What needs to be on a client machine when running an application compiled with the 10g ODP.NET?
The FAQ states the following :-
A: You will require the following:
Windows 2000, Windows XP Professional, or Windows Server 2003
Microsoft .NET Framework 1.0 or higher
Oracle9i Client Release 2 (9.2) or higher
Oracle Net Services (included with the client)
Oracle Services for Microsoft Transaction Server, Release 2 (9.2) or higher. This is required for applications using distributed transacations.
This implies that ODP.NET does NOT need to be installed on a client. However, I cannot find OraOPs9.dll on a machine with Client Release 9.2 installed. Should OraOps?.dll automatically come with a Client installation of 9.2 or higher?
Also, if an application is built with the 10g ODP.NET, can it be run from a machine with OraOps9.dll?
I'd be very grateful for anyone who can clear up my confusion.
Mick

This implies that ODP.NET does NOT need to be installed on a client. However, I cannot find OraOPs9.dll on a machine with Client Release 9.2 installed. Should OraOps?.dll automatically come with a Client installation of 9.2 or higher?
ODP.NET needs to be installed on the client. OraOps9.dll is part of ODP.NET, not the Oracle Client.
Also, if an application is built with the 10g ODP.NET, can it be run from a machine with OraOps9.dll?
If an application is built with 10g ODP.NET, it can be run with 9.2 ODP.NET as long as you do not use any 10g APIs. The new features in 10g ODP.NET are included in the doc and the ODP.NET FAQ for your reference.

Firefox cannot find profile, even after deleting and re-installing.

I un-installed firefox when the problem first started, then re-installed it. Still cannot find profile. I went through the Profile Manager Wizard, but that didn't work. It couldn't find the program. I'm not on firefox now since it won't load.

See:
*https://support.mozilla.org/kb/how-run-firefox-when-your-profile-missing-or-inacc
This is usually caused by a problem with the profiles.ini file and the profile marked as Default=1 in this file is no longer present on the hard drive.
*Windows: %AppData%\Mozilla\Firefox\<br>C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Profiles\<profile>\
*Linux: ~/.mozilla/firefox/
*Mac: ~/Library/Application Support/Firefox/
You can use one of these to make Firefox create/use a new default profile:
*Delete the profiles.ini file to force Firefox to create a new default profile
*Use the Profile Manager to create a new profile
*Use "Choose Folder" when you create a new profile to select the location of a lost profile and recover this profile
*http://kb.mozillazine.org/Profile_Manager
*https://support.mozilla.org/kb/Managing+profiles
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Cannot open itunes says i need to re install missing msvcr80.dll

Tried reloading itunes many times says I need to re install missing msvcr80.dll

Hello dgould1,
Thanks for using Apple Support Communities.
it may be necessary to remove all traces of iTunes and related software components from your computer.
For more information on this, take a look at:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
1. Remove iTunes and related components from the Control Panel
2. Verify iTunes and related components are completely uninstalled
3. Reinstall iTunes and related components
Best of luck,
Mario

CRVS2010 Beta - Cannot find documentation on what needs to be installed

Similar Messages

Maybe you are looking for