Crypto map mymap command I am not familiar with

I have the following commands in a new pix I am taking over and I am not sure what they do?
crypto map mymap client configuration address initiate
crypto map mymap client configuration address respond
any help would be appreciated

Hi .. they are used for remote VPNs:
1.- crypto map mymap client configuration address initiate
explanation: Use the crypto map mymap for remote vpn clients and the PIX Firewall will attempt to set IP addresses for each client.
2.- crypto map mymap client configuration address respond
explanation: Use the crypto map mymap for remote vpn clients and the PIX Firewall will accept requests for IP addresses from any
requesting client.
I hope it helps .. please rate if it does !!

Similar Messages

  • I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues.  I am not familiar with macs as this is my home computer used by other family members.  Any help on how to troubleshoot why such latency issues?

    I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues.  I am not familiar with macs as this is my home computer used by other family members.  Any help on how to troubleshoot why such latency issues?

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • I'm not familiar with MAC's.  Trying to insert turbo tax cd into my Dad's Mac OS X version 10.5.8 but it won't go in/stay.  Help please!

    I am not familiar with MAC's.  I am trying to insert Turbo Tax CD into my Dad's Mac.  But, the CD will not go in/stay in.  Need some help with this, anyone have an answer?  I would greatly appreciate it!  Thanks!

    Confused: You say nothing will "catch" in the slot, which I take to mean the optical drive won't accept anything. Just spits it out. Then you say you thought there was an eject button to push, which would imply there's a stuck disc inside.
    If it's the latter, try holding down the mouse while booting.
    http://support.apple.com/kb/TS2097

  • When I sign into iTunes for updates, a secondary username appears and I need to enter a password. I am not familiar with the second user name. Any Suggestions?

    When I sign into iTunes for updates, a secondary username appers and I need to enter a password. I am not familiar with the second username. Any suggestions?

    Are you using iTunes on your iPad or the actual program on a Mac/PC?
    If you are using on your iPad check the ID being used by going to Settings>iTunes & App Store if the Apple ID displayed isn't yours tap it and select Sign Out then sign in with your own Apple ID.
    If you are referring to iTunes on a Mac/PC select the Store Menu and check the Account Name next to the View Account text, if this isn't you select the Sign Out option directly above it then Sign In with the relevant credentials.
    Regards,
    Steve

  • Most of my my target audience are not familiar with iTunes, so I am trying to figure out how to explain how to rate it. What's the fastest way to say it to the iTunes-newbie?

    Most of my my target audience are not familiar with iTunes, so I am trying to figure out how to explain how to rate it. Is this the shortest way? “Open iTunes on your computer, click on iTunes Store and search for my podcast. You’ll see it at the top of the results. When you click on it, you’ll see “Write a Review” and will be able to submit your comments and ratings.” Right now they find my podcast because they are on my mailing list, not through iTunes. It would be easy if I could just say, "Go to iTunes.com" or "Go to my web site" - but there are sooooo many steps! Help! Thank you,
    Milana

    There is another trick - if you give them this URL:
    itpc://feeds.feedburner.com/RecurringRevenueRevolutionPodcast
    (note itpc not http)
    it will subscribe them directly to your feed in iTunes, but it does depend on their having iTunes installed (and in Windows set as the application to use with 'itpc'), otherwise they will get an error message, so it's a slightly double-edged weapon. You could them the link and say 'subscribe in iTunes' as an alternative to the iTunes Store page.

  • Maps 3.07 or later not compatible with S^60 5th ed

    Hi
    I note that 3.07 & 3.08 are not compatible with my 5800XM.
    Will 3.06 11wk10b01 (the last version available for this phone I think) continue to function for the forseeable future ?
    Do Nokia continue to update maps for legacy versions of Maps ?
    thanks
    Solved!
    Go to Solution.

    @swayzak
    At the same time as 00.02.41.123 has been released for OVI Maps v3.06 and later, 00.01.26.113 was released for v3.01, 3.03 & 3.04 if that answers your query.
    Happy to have helped forum with a Support Ratio = 42.5

  • Why windows command prompt is not working with java

    I installed java 1.6 to my computer (Laptop) and it is perfectly working with Netbeans and Eclipse
    but not working with windows xp xommand prompt
    It compiles the code but when it is going to run it throw the following exception
    Exception in thread "main" java.lang.UnsupportedClassVersionError: Example (Unsupported major.minor version 50.0)
            at java.lang.ClassLoader.defineClass0(Native Method)
            at java.lang.ClassLoader.defineClass(Unknown Source)
            at java.security.SecureClassLoader.defineClass(Unknown Source)
            at java.net.URLClassLoader.defineClass(Unknown Source)
            at java.net.URLClassLoader.access$100(Unknown Source)
            at java.net.URLClassLoader$1.run(Unknown Source)
            at java.security.AccessController.doPrivileged(Native Method)
            at java.net.URLClassLoader.findClass(Unknown Source)
            at java.lang.ClassLoader.loadClass(Unknown Source)
            at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
            at java.lang.ClassLoader.loadClass(Unknown Source)
            at java.lang.ClassLoader.loadClassInternal(Unknown Source)I've reinstalled java 1.6, but the output is same
    Please help me to get it correct
    Thank you

    E:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracl
    e\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Progr
    am Files\Microsoft SQL Server\90\Tools\binn\;C:\OrCAD\OrCAD_10.0\tools\pcb\bin;C
    :\OrCAD\OrCAD_10.0\tools\specctra\bin;C:\OrCAD\OrCAD_10.0\tools\bin;C:\OrCAD\OrC
    AD_10.0\tools\PSpice\Library;C:\OrCAD\OrCAD_10.0\tools\fet\bin;C:\OrCAD\OrCAD_10
    .0\tools\jre\bin;C:\OrCAD\OrCAD_10.0\tools\Capture;C:\Program Files\QuickTime\QT
    System\;C:\Program Files\Java\jdk1.6.0_01\bin;C:\Program Files\Microsoft Visual
    Studio\Common\Tools\WinNT;C:\Program Files\Microsoft Visual Studio\Common\MSDev9
    8\Bin;C:\Program Files\Microsoft Visual Studio\Common\Tools;C:\Program Files\Mic
    rosoft Visual Studio\VC98\bin;

  • Snow leopard tab command and Dock not working with spaces

    When I have spaces enabled, it wont switch to the desktop with the app running when I try to use dock, tab command. I tried repair permissions in Disk Utility. Tried rebooting. Tried autologin. It won't do anything when I click on the icon in the Dock, if its not in the present window. Of course if I turn off spaces, then its fine. I tried turning spaces on and off.
    What is the fix?

    you need to escape the backslash which is a special character in apple script. that means putting an extra backslash in there.
    <pre style="
    font-family: Monaco, 'Courier New', Courier, monospace;
    font-size: 10px;
    margin: 0px;
    padding: 5px;
    border: 1px solid #000000;
    width: 720px;
    color: #000000;
    background-color: #ADD8E6;
    overflow: auto;"
    title="this text can be pasted into the Script Editor">
    on run {input, parameters}
    do shell script "/Library/Application\\ Support/VMware\\ Fusion/boot.sh --restart" password "pass" with administrator privileges
    return input
    end run</pre>

  • Not familiar with wiki etiquette, Beginner's Guide needs to be changed

    Hello everyone,
    I am an Arch newbie and did my first Arch installation successfully last night.
    During the installation, a problem occured in chapter Configure the network of the Beginner's Guide. When executing
    # systemctl start dhcpcd
    the system refuses to do it, it complains it is in a chrooted environment and ignores the command. Consequently, I didn't have an internet connection after the reboot, but executing this piece of code again in my "real" system quickly solved the problem.
    Since Arch is a community effort and I'd like to give back, even if it's just small things as a newbie, I'd like to help improve the Wiki, but I am not sure about its etiquette after going through the Help:Editing as it has a rather technical nature, but not the policies.
    Is it ok for me to make direct editions to the Beginner's Guide?
    If yes, should I just add a note along the lines "repeat this command in case you get the error..."? Or what do you suggest to have a streamlined style of writing?
    Thanks for any feedback.

    parcival wrote:
    Hello everyone,
    I am an Arch newbie and did my first Arch installation successfully last night.
    During the installation, a problem occured in chapter Configure the network of the Beginner's Guide. When executing
    # systemctl start dhcpcd
    the system refuses to do it, it complains it is in a chrooted environment and ignores the command. Consequently, I didn't have an internet connection after the reboot, but executing this piece of code again in my "real" system quickly solved the problem.
    Since Arch is a community effort and I'd like to give back, even if it's just small things as a newbie, I'd like to help improve the Wiki, but I am not sure about its etiquette after going through the Help:Editing as it has a rather technical nature, but not the policies.
    Is it ok for me to make direct editions to the Beginner's Guide?
    If yes, should I just add a note along the lines "repeat this command in case you get the error..."? Or what do you suggest to have a streamlined style of writing?
    Thanks for any feedback.
    I am no expert, but in order to install arch, u need an internet connection already before the install process. And after the chroot, that connection will not change; the "systemctl start dhcpcd command" therefore is in my opinion not necessary.
    It makes sense to run "systemctl enable dhcpcd" after the chroot to start the internet connection during the next reboot. (That's probably also what u want to do; else u need to run the start command everytime u reboot your system)
    PS: Welcome to the "Arch Family"
    Last edited by tumas (2013-02-28 10:22:08)

  • My apple id account is using an email to send me messages that im not familiar with

    Hello, Im having difficulty with my security questions I can not remember the answers to them. The email for the request of the amswers is not my email address so I am not able to use my apple ID account. How can you help me.

    contact apple and if they can verify your account then they can help reset them

  • How to map a url that does not match with the context root  ?

    does weblogic support url that does not match the context root ?
    ex. the context root is AAA. the welcome page can be
    retrieved using http://localhost:7001/AAA
    Can it be configured to use http://localhost:7001/BBB to bring up the index.html in context root AAA ? if so, how ?

    I agree with Imp68.
    It still amazes me that in 2014 so many web sites are still not standards-compliant and instead insist on sniffing for the user-agent.  And, in the majority of cases, I've found that the websites work fine with any modern browser.
    phardell,
    To be clear, Safari is not the problem, the website is!  The developer of this website is still living in the 1990s and needs to move forward with the times.  Imp68's suggestion will cause Safari to "pretend" to be whatever browser you wish.  Try choosing "Safari 7" if that worked for you in the past and the website will likely go back to working.  If that does not work then try choosing "Internet Explorer 10" from the menu and see if that works.
    No matter what the result, you should look at the bottom of the page for a link to report problems with the website.  Submit a comment that tells them that they need to "modernize your website to support all modern web browsers".
    Good luck.

  • I've had a VHS tape converted to DVD. The DVD contains several Video_TS files, which I am not familiar with. I was able to play the original on both my iMac and TV but not copy them. I had copies made but they won't play. Why?

    I've had a VHS tape converted to DVD. The DVD contains a Video_TS folder containing several Video_TS files. I tried to copy the disk. The Video_TS files copy but I can't play the DVD. What is the problem?

    Hi
    Most probably You've made Your copies as Data-DVDs.
    If You put in a blank DVD - Your Mac want's to format it and put it on DeskTop/Finder for You to put files and document onto it. Then on Eject it Burns it - and as a Data-DVD. They will never Play on any DVD-Player.
    If You want a Video-DVD then You've to go via a program that can structure Your DVD as such e.g. iDVD or Disk Util tool or Roxio Toast™.
    Disk Util tool - can copy a home made Video-DVD to new Video-DVD copies.
    Start Disk Util tool
    Insert Master DVD
    select to copy it
    Eject it when asked to do so
    Insert Blank DVD - WHEN YOUR Mac ASKS FOR IT - Else You make a Data-DVD which You don't want.
    THIS process do not work for Commercial CopyProtected DVDs - and would be illegal any way. Take Care.
    Yours Bengt W

  • HT201464 Running slowly - Activity Monitor has programs I am not familiar with running...

    I am trying to get my macbook pro (2010 i5 4gb) running faster like it used to. I came across the activity monitor and have noticed lots of things I don't recognise. Can someone just tell me if I get rid of them will that help or damage my computer?

    Do not touch any of the 'root' applications.
    I suggest that you download an Etrecheck report as a start for possible trouble shooting.
    http://www.etresoft.com/etrecheck
    Ciao.

  • Having trouble transferring itunes library to an external hard drive.  All of my music is in the main ITUNES library and every site and answer I get says tranfer my library/user name/ da da da da da.... I am not familiar with this-need a simple way-thx

    HELP!   I have looked at video sites, looked on here, to no avail.   Please dont talk negatively about my question (as I have seen some pretty mean responses to topics )   I am trying to copy my itunes music to an external hard drive.  Here is my situation:  All of my music is in the main ITUNES location.  I  have been told to save the "user library".  I really need an elementary step by step way.  I plan to visit the library in town tomorrow to get a book but worried because my computer is having issues  TONIGHT.  Thanks for any help....  This is so helpful to know there may be help out there.

    iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you let iTunes manage your music:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library.
    To see your iTunes folder click on the Music folder icon in your Finder sidebar.

  • TS1314 I need to transfer Ebooks from PC to my IPad...not familiar with syncing. Thks

    I need to be able to transfer Ebooks from my PC to my IPad...also need help in syncing from PC to IPad. I have downloaded ITunes to my PC. Using Windows.Thanks. Mazda167

    Syncing with iTune
    http://support.apple.com/kb/HT1386

Maybe you are looking for