Cryptographic operations with the Card Manager

Hello,
I'm new to smart card programming and could need a little help.
Here is what I'm trying to do:
First off, I don't want to develop a java applet, I want to use the functionality of the Card Manager (Issuer Security Domain) only. With the ISD, I'm trying to put a cryptographic key (e.g. RSA key pair) on the card and read it back afterwards. Is this generally possible?
Also, can you do cryptographic operations (e.g. RSA signing) using only the ISD?
It would help me a lot if somebody could give me some hints and, if it's possible, the sequence of APDU commands I have to send to the card.
Thank you.

misfire wrote:
Hello,Hello.
I'm new to smart card programming and could need a little help.
Here is what I'm trying to do:
First off, I don't want to develop a java applet, I want to use the functionality of the Card Manager (Issuer Security Domain) only. With the ISD, I'm trying to put a cryptographic key (e.g. RSA key pair) on the card and read it back afterwards. Is this generally possible?ISD has cryptographic capabilities. It is limited to secure channel protocol handling. DES for SCP02 and RSA for SCP10 plus RSA for DAP (data authentication pattern). You do not have the possibility to use it for something else. What you can do though is access the DES/RSA part of the ISD via an applet (GP API) to e.g. decrypt and encrypt data.
Also, can you do cryptographic operations (e.g. RSA signing) using only the ISD?Yes, but only via an applet.
It would help me a lot if somebody could give me some hints and, if it's possible, the sequence of APDU commands I have to send to the card.Check out the GP specifications: SCP02/GP API in GP2.1.1 and SCP10/GP API in GP2.2 .

Similar Messages

  • Verify permissions failed: Framework unable to communicate with the Disk Management daemon

    I'm experiencing problems with the Disk Management daemon on my MBPro Retina running Mountain Lion 10.8.2. I discovered it first when I tried to enable file vault and received the "Framework unable to communicate with the Disk Management daemon" error message.
    So I started up Disk Utilities (which started fine) and tried to run Verify Disk Permissions. It failed with the following errror message:
    "Verify permissions failed: Framework unable to communicate with the Disk Management daemon"
    So I booted in to safe mode and tried Verify Disk Permissions again with the same results.
    So I booted in to the recovery partition to run Disk Utilities. It ran fine and the Verify Disk Permissions found some errors which I then fixed.
    I re-booted normally but am still experiencing the same behavior.
    I have turned off my anti-virus (Sophos) to no effect.
    I checked the console and found the following message:
    12/6/12 3:27:02.828 PM Disk Utility[157]: *** WARNING: Method userSpaceScaleFactor in class NSWindow is deprecated on 10.7 and later. It should not be used in new applications. Use convertRectToBacking: instead.
    Thoughts or suggestions?  Thanks!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • ISync Palm Conduit cannot be configured with the HotSync Manager UPDATE

    First, I apologize for the SPAM-like posting of the material below in the existing threads regarding this issue. It is—unfortunately—the most effective way to garner the attention of earlier posters and gather this information.
    Apple continues to investigate the issue, and needs this information to isolate and identify the problem. It is characterized by the apparently successful installation of the bundled iSync Palm Conduit using the Enable Palm OS Syncing… option in iSync 2.4 with either Mac OS X 10.4.9 or 10.4.10, but with the result that this conduit—normally visible in and configurable with the HotSync Manager—cannot be seen and therefore not configured.
    In order to help Apple software engineers isolate and identify this issue—if you are affected by this specific issue—can you please provide the precise build number for the operating system on the machine that exhibit this problem?
    To do so, select About This Mac from the Apple menu, and—beneath the Mac OS X label—press the Version 10.4.9 or Version 10.4.10 label. That value will change to something like 8P1xxx. Please respond to this message with that build number, the version of Mac OS X 10.4.x you have installed, and the last three digits of your machine serial number.
    Thank you in advance for providing this information.

    First, I apologize for the SPAM-like posting of the material below in the existing threads regarding this issue. It is—unfortunately—the most effective way to garner the attention of earlier posters and gather this information.
    Apple continues to investigate the issue, and needs this information to isolate and identify the problem. It is characterized by the apparently successful installation of the bundled iSync Palm Conduit using the Enable Palm OS Syncing… option in iSync 2.4 with either Mac OS X 10.4.9 or 10.4.10, but with the result that this conduit—normally visible in and configurable with the HotSync Manager—cannot be seen and therefore not configured.
    In order to help Apple software engineers isolate and identify this issue—if you are affected by this specific issue—can you please provide the precise build number for the operating system on the machine that exhibit this problem?
    To do so, select About This Mac from the Apple menu, and—beneath the Mac OS X label—press the Version 10.4.9 or Version 10.4.10 label. That value will change to something like 8P1xxx. Please respond to this message with that build number, the version of Mac OS X 10.4.x you have installed, and the last three digits of your machine serial number.
    Thank you in advance for providing this information.

  • Disk Utility has Lost Connection with the Disk Managment Tool

    Hi,
    For starters, this problem is not associated with the thread that Brian Z. has posted at the top of this forum. Having said that, here's my problem:
    I had installed Security Update 2006-003, and Quicktime 7.1. Permissions were repaired before and after each installation, and all went well.
    Some hours later, I was experimenting with Apple Remote Desktop. I had activated ARD in the System Preferences>Sharing pane, and it provided me an IP address associated with ARD. I then turned on Airport, and ARD provided me with an IP address associated with that connection. However when I turned off my modem connection, System Preferences>Sharing hung, and had to be Force Quit.
    Console Log follows:
    ===== Mon May 15 2006 ===== 21:09:09 America/Anchorage =====
    2006-05-15 21:09:17.488 System Preferences[2732] Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    2006-05-15 21:09:28.224 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:308
    2006-05-15 21:09:38.230 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:343
    2006-05-15 21:09:48.415 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:343
    Thinking a plist had become corrupted, I trashed the following:
    com.apple.systempreferences.plist
    com.apple.RemoteDesktop.plist
    com.apple.Remotemanagement.plist
    com.apple.sharing.firewall.plist.
    System Preferences started out very slowly, but then all the panes except Sharing would work ok.
    I booted from the install disk and performed a Disk Repair. There were no problems reported.
    When I tried to run a Repair Permissions, after about 20 seconds I got the, "Disk Utility has lost connection with the disk management tool and can not continue. Please quit and relaunch Disk Utility."
    I quit D.U. and the Installer, and was able to successfully run a Repair Permissions from the D.U. in my Utilities folder. It had no problems to report.
    Continuting to troubleshoot the System Preferences problem, I then trashed the com.apple.preferencepanes.cache. This solved my System Preferences>Sharing problem.
    However, I am still unable to perform a Repair Permissions after booting from my install disk (I get the subject message). Repairing permissions from the Disk Utility in my Utilies folder works fine.
    Any thoughts out there on a logical way to troubleshoot where my problem is? Is there a way to get a console log when I'm running DU from the install disk, or a comparable source??
    Thanks,
    Bob

    I found this crash log that was generated about the time I had problems with System Preferences hanging.
    Thoughts?
    Bob
    Entitled "writeconfig.crash.log"
    Host Name: Bobs-Big-Mac.local
    Date/Time: 2006-05-15 21:08:17 -0800
    OS Version: 10.3.9 (Build 7W98)
    Report Version: 2
    Command: writeconfig
    Path: /System/Library/PrivateFrameworks/Admin.framework/Resources/writeconfig
    Version: ??? (???)
    PID: 2707
    Thread: 0
    Exception: EXC_BREAKPOINT (0x0006)
    Code[0]: 0x00000001
    Code[1]: 0x90a8d2c0
    Thread 0 Crashed:
    0 com.apple.Foundation 0x90a8d2c0 _NSRaiseError + 0xf8
    1 com.apple.Foundation 0x90a349d8 -[NSConnection sendInvocation:] + 0x6a4
    2 com.apple.Foundation 0x90a2d8e0 -[NSObject(NSForwardInvocation) forward::] + 0x198
    3 libobjc.A.dylib 0x90866810 objcmsgForward + 0xb0
    4 writeconfig 0x0000baac 0x1000 + 0xaaac
    5 writeconfig 0x0000ec84 0x1000 + 0xdc84
    6 writeconfig 0x0000ad88 0x1000 + 0x9d88
    7 writeconfig 0x0000abfc 0x1000 + 0x9bfc
    PPC Thread State:
    srr0: 0x90a8d2c0 srr1: 0x0202f030 vrsave: 0x00000000
    cr: 0x24000442 xer: 0x00000000 lr: 0x90a8d298 ctr: 0x90a23528
    r0: 0x00000000 r1: 0xbffff430 r2: 0xa0a204bc r3: 0xa0a34e20
    r4: 0x9086eb88 r5: 0x20000000 r6: 0xbffff110 r7: 0x00000000
    r8: 0x00000001 r9: 0x0030d370 r10: 0x00000239 r11: 0x28000442
    r12: 0x90a23528 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
    r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
    r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000
    r24: 0x00310680 r25: 0xbffffcd8 r26: 0x00311c50 r27: 0xa0a2af6c
    r28: 0xa0a30e7c r29: 0xa0a24ae0 r30: 0x003109a0 r31: 0x90a8d1d0
    Binary Images Description:
    0x1000 - 0x28fff writeconfig /System/Library/PrivateFrameworks/Admin.framework/Resources/writeconfig
    0x80830000 - 0x8090efff libxml2.2.dylib /usr/lib/libxml2.2.dylib
    0x8c2bc000 - 0x8c2c5fff libBSDPClient.A.dylib /usr/lib/libBSDPClient.A.dylib
    0x8fe00000 - 0x8fe4ffff dyld /usr/lib/dyld
    0x90000000 - 0x9014ffff libSystem.B.dylib /usr/lib/libSystem.B.dylib
    0x901c0000 - 0x9026efff com.apple.CoreFoundation 6.3.9 (299.37) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x902b0000 - 0x90529fff com.apple.CoreServices.CarbonCore 10.3.7 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
    0x905a0000 - 0x90610fff com.apple.framework.IOKit 1.3.6 (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0x90640000 - 0x906c8fff com.apple.CoreServices.OSServices 3.0.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
    0x90733000 - 0x90740fff com.apple.CommonPanels 1.2.1 (1.0) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
    0x90810000 - 0x90810fff com.apple.ApplicationServices 1.0 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
    0x90860000 - 0x908cffff libobjc.A.dylib /usr/lib/libobjc.A.dylib
    0x908f5000 - 0x90912fff com.apple.audio.SoundManager 3.9 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
    0x90940000 - 0x909b3fff com.apple.DesktopServices 1.2.5 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
    0x90a20000 - 0x90b7bfff com.apple.Foundation 6.3.8 (500.61) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
    0x90d40000 - 0x90d40fff com.apple.Carbon 10.3 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
    0x90d50000 - 0x90d6bfff com.apple.SystemConfiguration 1.7.1 (???) /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
    0x90d7c000 - 0x90d8cfff com.apple.speech.recognition.framework 3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
    0x90dd0000 - 0x90df0fff com.apple.DirectoryService.Framework 1.7.2 /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
    0x90e10000 - 0x90e11fff com.apple.ServerControl 10.2.3 /System/Library/PrivateFrameworks/ServerControl.framework/Versions/A/ServerCont rol
    0x90e13000 - 0x90e4bfff com.apple.LaunchServices 10.3.5 (98.4) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LaunchServices.framework/Versions/A/LaunchServices
    0x90e60000 - 0x90e66fff com.apple.ServerPrefs 10.2.3 /System/Library/PrivateFrameworks/ServerPrefs.framework/Versions/A/ServerPrefs
    0x90e80000 - 0x90e9ffff com.apple.MediaKit 2.6 (232.3) /System/Library/PrivateFrameworks/MediaKit.framework/Versions/A/MediaKit
    0x90ec0000 - 0x90ec0fff com.apple.Cocoa 6.3 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
    0x9102d000 - 0x91047fff com.apple.openscripting 1.2.1 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
    0x910c0000 - 0x910c1fff com.apple.AFPDefines 2.0.1 /System/Library/PrivateFrameworks/AFPDefines.framework/Versions/A/AFPDefines
    0x910e0000 - 0x91134fff com.apple.bom 1.2.7 (64.1) /System/Library/PrivateFrameworks/Bom.framework/Versions/A/Bom
    0x91141000 - 0x91141fff com.apple.CoreServices 10.3 (???) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
    0x91230000 - 0x9123afff com.apple.framework.machinesettings 1.3.3 /System/Library/PrivateFrameworks/MachineSettings.framework/Versions/A/MachineS ettings
    0x91242000 - 0x9124cfff com.apple.framework.AppleTalk 1.2.0 (???) /System/Library/Frameworks/AppleTalk.framework/Versions/A/AppleTalk
    0x91251000 - 0x9125afff com.apple.DiskArbitration 2.0.5 /System/Library/PrivateFrameworks/DiskArbitration.framework/Versions/A/DiskArbi tration
    0x912e0000 - 0x912f7fff com.apple.LangAnalysis 1.5.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
    0x91303000 - 0x91370fff libvDSP.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
    0x913a0000 - 0x9145ffff ColorSync /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
    0x915e0000 - 0x91699fff com.apple.QD 3.4.71 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
    0x916f0000 - 0x91728fff com.apple.AE 1.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ AE.framework/Versions/A/AE
    0x91760000 - 0x917f3fff com.apple.print.framework.PrintCore 3.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
    0x9194f000 - 0x9194ffff com.apple.audio.units.AudioUnit 1.3.3 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
    0x91970000 - 0x919befff com.apple.print.framework.Print 3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
    0x91a40000 - 0x91ab3fff com.apple.NavigationServices 3.3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
    0x91afb000 - 0x91b0bfff com.apple.ImageCapture 2.1.5 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
    0x91b30000 - 0x91b44fff libCGATS.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib
    0x91b60000 - 0x91b6bfff libCSync.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
    0x91ba3000 - 0x91bbdfff libresolv.9.dylib /usr/lib/libresolv.9.dylib
    0x91bd0000 - 0x91bdffff libPSRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libPSRIP.A.dylib
    0x91c00000 - 0x91c13fff libRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
    0x92037000 - 0x92052fff libcurl.2.dylib /usr/lib/libcurl.2.dylib
    0x92070000 - 0x92096fff com.apple.FindByContent 1.4 (1.2) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ FindByContent.framework/Versions/A/FindByContent
    0x92170000 - 0x92357fff com.apple.security 2.4 (179) /System/Library/Frameworks/Security.framework/Versions/A/Security
    0x927f0000 - 0x92827fff com.apple.CFNetwork 1.2.2 (7) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
    0x9283f000 - 0x92857fff com.apple.WebServices 1.1.1 (1.1.0) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServ icesCore.framework/Versions/A/WebServicesCore
    0x92880000 - 0x92c05fff com.apple.HIToolbox 1.3.7 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
    0x92de0000 - 0x92e30fff com.apple.HIServices 1.4.1 (0.0.1d1) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
    0x92e70000 - 0x9336ffff com.apple.AppKit 6.3.10 (743.42) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    0x93680000 - 0x93958fff com.apple.CoreGraphics 1.203.30 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
    0x939d0000 - 0x939d4fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
    0x93a50000 - 0x93a64fff libcups.2.dylib /usr/lib/libcups.2.dylib
    0x93a6a000 - 0x93a84fff libPDFRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libPDFRIP.A.dylib
    0x93bec000 - 0x93ca4fff com.apple.audio.toolbox.AudioToolbox 1.3.4 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
    0x94270000 - 0x94333fff com.apple.DiskImagesFramework 10.3.8 (77) /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages
    0x94580000 - 0x9458bfff com.apple.securityhi 1.2 (90) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
    0x94593000 - 0x9459ffff com.apple.help 1.0.1 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
    0x945b0000 - 0x945b9fff libz.1.dylib /usr/lib/libz.1.dylib
    0x94650000 - 0x946affff com.apple.SearchKit 1.0.2 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
    0x94720000 - 0x94721fff com.apple.securityfoundation 1.0 (6) /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
    0x94800000 - 0x9488cfff com.apple.ink.framework 101.1.4 (55.12) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
    0x94e0b000 - 0x94e1efff com.apple.speech.synthesis.framework 3.2 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
    0x95140000 - 0x951b5fff com.apple.DiscRecordingEngine 2.1.17 /System/Library/Frameworks/DiscRecording.framework/Versions/A/Frameworks/DiscRe cordingEngine.framework/Versions/A/DiscRecordingEngine
    0x954c0000 - 0x95ac6fff libBLAS.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
    0x95b20000 - 0x95df0fff libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
    0x95f00000 - 0x95f20fff libvMisc.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
    0x96028000 - 0x960f0fff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib
    0x968d0000 - 0x969b2fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
    0x96a04000 - 0x96a6dfff com.apple.htmlrendering 1.1.2 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
    0x96aa0000 - 0x96acefff libssl.0.9.7.dylib /usr/lib/libssl.0.9.7.dylib
    0x96b50000 - 0x96bdffff ATS /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
    0x96c00000 - 0x96c67fff com.apple.audio.CoreAudio 2.1.3 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
    0x96cb0000 - 0x96d9efff libiconv.2.dylib /usr/lib/libiconv.2.dylib
    0x96de0000 - 0x96df0fff com.apple.vecLib 3.0.3 (vecLib 3.0.3) /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
    0x96ee0000 - 0x96ee8fff libbsm.dylib /usr/lib/libbsm.dylib

  • "Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."  Trying to format my iomega external HD for use with Mac

    Hi. Trying to connect iomega ext. HD. i have to reformat for Mac. When i plug in & go to Disk Utility,the external shows up and i'm supposed to click "partition". When i do, a box comes up saying ""Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility." I quit and relaunched, same results. After googling my question, i came up with this:
    "Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."
    (Quitting and reopening Disk Utility does not help.)
    The following also appears in Console log:
    *** malloc[419]: Deallocation of a pointer not malloced: 0x290a410; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug : for architecture i386 object: ./Applications/iTunes.app/Contents/MacOS/iTunes malformed object (unknown flavor for flavor number 0 in LC_UNIXTHREAD command 27 can't byte swap it)
    Workaround
    Quit Disk Utility.
    From the Finder's Go menu, choose Go to Folder....
    Type the following, then click OK: /Library/Receipts
    Temporarily remove these iTunes receipts from /Library/Receipts (sort the folder alphabetically as a list):
    iTunes.pkg
    iTunes4.pkg
    You can put them on the desktop, for example. Do not remove iTunesX.pkg or iTunes Phone Driver.pkg.
    Open Disk Utility and repair disk permissions again.
    Quit Disk Utility.
    Put the removed iTunes receipts back in /Library/Receipts.
    Note: This issue does not affect Disk Utility's verify or repair disk features.
    All seemed good, for a moment, until, upon going back to Disk Utility after removing itunes4.pkg and putting on desktop (i did not have itunes.pkg to remove) the same thing was happening. When i highlite my iomega ext. on left of page, disk perrmissions is grayed and does not allow me to click on it. Same problem from the start. Can somebody please help me out here? That would soooo awesome. Thanx!

    i'm just scared i will do something wrong on my own and lose my data.
    You shouldn't be scared of that, because you should already have backups. If you don't have backups, then backing up is the first priority.
    Insert the Snow Leopard DVD and restart. When you hear the chime, hold down the C key and keep holding it until the Apple logo appears on the display. You should now see the language selection screen. Select your language, then choose Utilities > Disk Utility from the menu bar. In the Disk Utility window, select the external drive (not the internal). The drive may already have a data partition, in which case there will be another icon below the drive icon. Choose the drive icon, then select the Partition tab. Create a single partition with the default options (GUID partition table, Mac OS X Extended Journaled).
    When the partitioning is done, select the startup volume on your internal drive in the DU window. Select the Restore tab. Drag the icon of the startup volume to the "Source" field. Then drag the icon of the newly-created volume on the external drive to the "Destination" field. Make sure you have this right. Then click the Restore button, and the data on your startup volume will be copied to the external drive.

  • ERROR: MyService.jws:715:There are two or more operations with the same schema-element 'ns0:MyNameSpace' on the input message in a web service file or callback interface.

    I have two web service operations that have the same complex type as their input
    parameter. I want to map this type to an existing schema. I can successfully
    do this with the first operation using XQuery but when I attempt to do this with
    the second operation I get the following error:
    ERROR: MyService.jws:715:There are two or more operations with the same schema-element
    'ns0:MyNamespace' on the input message in a web service file or callback interface.
    ERROR:      SUGGESTION: Use different schema-element values for each of those operations.
    How can I use different schema-element values? The input parameters are to be
    mapped to the same schema and same element since they are the same for both operations....

    I am having the same problem. How did you resolve this..?? could you please tell me the solution??
    Thanks
    Shari

  • Can the card manager of jcop41 v2.2 support multiselect ?

    I find the card manager of simulation of jcop can't be select on multi channel at the same time, but can the real card of jcop41?
    can anyone tell me?

    All JCOP products have by default only the basic logical channel enabled. The reason is that it shall be GP compliant, and GP spec says that the CardManager must be multiple selectable if multiple logical channels are supported. The CM in JCOP is not multi selectable. If you don't care about GP compliancy (at least on this issue), you can set up to 4 logical channels during pre-perso (JCRE_MODE, two lowest bits).

  • HT1918 How do you solve an issue with the card? I don't get the option of 'none' :(

    How do you solve an issue with the card? I don't get the option of 'none'

    I had this exact same problem with the new iPhone I bought on 1/4/13. The walk through they provide on how to do this is useless because it fails to explain that if you are already having the problem of not getting the "None" payment option with an Apple ID then you will need to create a completely new Apple ID.
    I had to do this 7 times since I bought my iPhone on Friday until this morning to figure out how to finally be able to use the Home Sharing option in iTunes to put my music collection on my brand new $500.00 iPhone. Pretty pathetic if you ask me but since it made me so angry I want to make sure other know how to do this so you don't get as upset as I did.
    #1 If your current or soon to be "old" Apple ID is not providing the option for "None" as a payment option then you need to make a brand new one. But you have to make it specifically how I tell you.
    #2 You will need to use an email address that has not already been used for anything related to a previous Apple ID. You might need to make a brand new email address.
    #3 Open iTunes, then open iTunes Store (upper right corner of iTunes).
    #4 Click on App Store (upper center of screen).
    #5 Scroll down the screen page until you see Top Free Apps on the right side.
    #6 Choose any one of the FREE apps.
    #7 You should either get the option to create a new Apple ID box, either that, or it will pop up with some kind of disclaimer and then it does the create new Apple ID.
    Either way just create a new Apple ID when it gives you the option to and then when you get to the page that looks like the payment page the "None" payment option will finally be available.
    Note: You will still have to fill out the information on the payment page. As long as you choose the "None" option it will not request any credit card information.
    #8 You will be sent a confirmation email to the new email account. Just follow through with what ever it tells you and viola now you can use your Apple Device.
    What a pain in the keester, eh?

  • How to run group solve with the batch manager

    I'd like to know if it is possible (and how) to run group solve defined in OFA with the batch manager.
    Thank you
    Luigi Polverini
    Synesis s.r.l.

    OFA uses its Task Processor rather than Batch Manager to run tasks in batch. Group solves can be scheduled this way by submitting the group solve task to the TP, and then rescheduling it in the Task Queue window.
    null

  • Error communicating with the Cluster Manage Web Service

    Hi,
    i connected oracle database with the Endeca Studio but while uploading Departments dataset i m getting this error
    "Error communicating with the Cluster Manage Web Service" so plz can anyone explain me wat is this error about.
    thanks in advance

    I actually ran into this myself- as Pat notes, it's hard to say without seeing log files, but I think that perhaps the default domain profile that the Endeca Server uses for domains created using Provisioning services has not been created.  First see what domain profiles exist.  Navigate to wherever endeca-cmd lives (e.g., user_projects/domains/endeca_server_domain/EndecaServer/bin), and use the list-dd-profile command:
    -bash-3.2$ ./endeca-cmd.sh list-dd-profiles
    The profiles that exist will be returned in your terminal window:
    prov_dd_profile
    default
    If you only see 'default', then you will need to create 'prov_dd_profile'
    ./endeca-cmd.sh put-dd-profile prov_dd_profile
    Then try uploading your file again in Studio.
    Cheers,
    Andrew

  • 1488: The workstation is no longer imported to the tree from where you are attempting to launch the operation. The Remote Management session cannot proceed.

    After upgrading a Windows XP Pro SP1 machine to the ZfDagent from the
    zfd65u2 patch I receive the following error:
    1488: The workstation is no longer imported to the tree from where you are
    attempting to launch the operation. The Remote Management session cannot
    proceed.
    For now I have went back to the ZfD 4 IR5 agent which doesn't exhibit this
    problem. Any ideas?
    Jim Webb

    Jim,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Blackberry 8800 closes the connection with the desktop manager

    i have blackberry 8800... when i try to connect with the desktop manager 5.0 it connects flawlessly but after some seconds a message appears that your device has lost the connection with the desktop manager but even then the usb sign stil being showed infront of the battery indicatior... after some seconds of losing the connection, it connects again and disconnects again and this is goes on ....
    i need help please
    regards

    please help me . is theres any solution to it. done battery replacment reset. but nothing happens

  • TS1702 I'm having trouble updating my apps. the message that appears is that the security code of credit card is invalid. already talked to the operator of the card and everything is ok.

    I'm having trouble updating my apps. the message that appears is that the security code of credit card is invalid. already talked to the operator of the card and everything is ok.

    The address on the billing statement from the credit card company must match the information that you have filled in on the fields in iTunes when you set up the account. In other words you cannot abbreviate in iTunes if the information for you billing address is not abbreviated on the statement that you get in the mail. If the statement lists your street as "Street" and you type in "St." - that can cause issues. If that's not the problem, sign out of your ID, restart the iPad and sign in again.
    Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>Store>Sign in and then try to update again.

  • How to use a GPIB card's LabView drivers to communicate with the card?

    I have an axiomtek AX4810P PCI-GPIB card and i have aquired LabView drivers from the manufacturer.
    This has put VI's for the GPIB functions on the 'user palette' but i can't work out how to use them to communicate with the card. can anyone help? please.

    LS,
    Thank you for contacting National Instruments.
    Unfortunately, since you are not using a National Instruments GPIB card, I do not have access to the drivers that were provided to you by your card's manufacturer. I would suggest contacting Axiomtek directly to obtain support using their drivers.
    However, I did write a small VI that demonstrates how to use similar National Instruments drivers with a National Instruments GPIB card. Keep in mind, this example VI is not intended to work with your particular card. The drivers you obtained from Axiomtek may have similar functions, however, and you can use my VI as a guide. My VI allows you to send a command to an instrument at address 2 on the GPIB card.
    Hope this helps!
    Matthew C
    Applications
    Engineer
    National Instruments
    Attachments:
    GPIB_Communication.vi ‏23 KB

  • Issue with the Travel Management Workflow

    Hi Experts,
    I have developed a Custom Travel Managment Workflow which is triggered whenever a Trip is created in SAP. Now in the Workflow If I change the trip and Save the Trip again my Workflow is triggering because the CREATED event is triggering along with the CHANGE event (Verified through SWEL transaction) which doing SAVE operation. I am not sure why CREATED event is triggering instead I am expecting only CHANGE event should trigger.
    Please help me how can I achieve the above request.
    Thanks in adavnce.
    Regards,
    Srinivas

    Hi Srinivas,
    It is a standard behavior of Travel workflow. Even you change the travel request, the Created event will trigger.
    But you can manage this using Fork step and Wait event. In the workflow create a forq atep and create a wait for event in one branch. In the wait for event, create a BUS2089 - Changed.
    In the fork branch will be 2 and necessary branch should be 1. So if the change event occured the wait step will be triggered. In this branch you can implement your business logic.
    Thanks,
    Viji.

Maybe you are looking for