Crys Reports - Mark the Legend Labels and Chart bar - values custom names

Hai,
I want to change the default names/labels of the chart elements (for e.g. bar chart - the labels and values) , in my reports the labels are directly taken from the database columns, how can I change this?,
Someone please help...
Thank you in advance.
Vijay.

Hi
You can select the individual elements(for e.g chart title,legend,chart frame,grid lines,individual bars and series risers etc.).
To do this do a normal left click and then again a left click on the desired object within the chart(which will select the object), and then do a right click which will come up with all possible options.
Say for e.g you wan't to edit a default data label then follow the steps:
1. Left click on the chart
2.Left click on the data label.
3.Right click>>Chart Options>>Titles
4.Here you can edit the default title
Thanks

Similar Messages

When I publish projects with AICC reporting enabled the SWF "breaks" and does not load.

When I publish projects with AICC reporting enabled the SWF "breaks" and does not load. If I change the publish method to SCORM the SWF works, and if I turn off reporting the SWF also works.

OK. That makes sense now. Captivate 6 changed over to Rustici's LMS drivers. Cp7 must have made even further changes that mean you must have an LMS present if you turn on reporting.
I would suggest you just turn off reporting while you are testing other aspects of the course functionality during development, and only turn on reporting when you are ready to upload to your LMS.

V I Engineering, Inc has immediate needs for Systems Engineers (Contract) and Senior Systems Engineers (Contract) (reporting to the Test Software and Integration Group Manager)

Company: V I Engineering, Inc.
Locations: Various - USA
Salary/Wage: $negotiable
Status: Hourly Contractor
Relevant Work Experience: 5+ years system integration (LabVIEW/TestStand experience required)
Career Level: Intermediate/Experienced
Education Level: Bachelor's Degree
Residency/Citizenship: USA Citizenship or Greencard required
Driving Business Results through Test Engineering
V I Engineering, Inc. has a vision for every client we engage. That vision is to achieve on-time and on-budget program launch more efficiently that the competition. To realize this vision, customers need to achieve predictable test systems development, eliminate waste in test information management, and drive increased leverage of test assets. An underlying requirement for all of these areas is metrics tracking and measurement based decision making.
Job Description
Ready to make a difference? Bring your experiences and skills to the industry leading test organization. Help us to continue to shape the way the world views test. We are seeking a talented Systems Engineer Contractor to be responsible for technical execution of successful projects in the Medical, Military, Transportation, Consumer Electronics and Aerospace Industries. The position will have very high visibility to customers and vendors. This is a very fast paced team with close customer contact and strong career development opportunities. A large part of the position is to identify, own and drive technical design, development and installation of test systems. You will work alongside other like-minded and equally talented engineers, and be creative in a fast-paced and flexible environment that encourages you to think outside the box. You will be available to spend extended periods at our customer sites to complete system installations.
Required
5+ years of Systems Integration experience
3+ years LabVIEW experience
1+ years TestStand experience
Experience in Implementation and Delivery of Test Systems, including integration
Experience in ATE usage and development
Experience in building and Integrating Mechanical Fixtures
Experience in Understanding the design of Circuit Boards as they relate to a total system, and their fault-finding
Experience in Taking Part in Technical Teams throughout All Phases of Project Lifecycle
Experience in Interfacing with Sub-vendors and Customers
Ability to Multitask
Comfortable Working on Various Team Sizes
Excellent Communication Skills
Desired
Requirements generation and review experience
National Instruments Hardware knowledge
Experience with Source Code Control (SCC)
Experience executing verification and validation for projects
Experience generating and/or reviewing cost proposals
RF Technology (DAQ, General RF Theory)
FPGA (with LabVIEW)
Professional software engineering processes and metrics experience
TortoiseSVN
V I Package Manager (VIPM)
Experience with Projects for Regulated Industries
MS Project
Formal Education
Technical degree (BS Engineering, Computer Science, Physics, Math)
National Instruments Courses a plus
National Instruments certification a plus
Notes:
Expected Travel Time is up to 50%.
V I Engineering, Inc. offers a dynamic work environment and the flexibility of a small company.
The Test Software and Integration Group values innovation, out-of-the-box thinking, high-tech toys and a fun / amazingly collaborative working environment. We're a National Instruments Select Integrator, and we're the closest you can get to playing with all the pre-released and new NI toys without joining the NI R&D team - and we get to play with them in the real world.
To apply for this position, email a cover letter and resume to [email protected] with the subject "TSIG Systems Engineer (Contract) employment application".
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

Edit
Jeff

V I Engineering, Inc has immediate needs for Systems Engineers and Senior Systems Engineers (reporting to the Test Software and Integration Group Manager)

Company: V I Engineering, Inc.
Locations: Positions available in our Farmington Hills, MI Office
Salary/Wage: $negotiable
Status: Full Time, Employee
Relevant Work Experience: 5+ years system integration (LabVIEW/TestStand experience preferred, but not required)
Career Level: Intermediate (Non-Manager)
Education Level: Bachelor's Degree
Residency/Citizenship: USA Citizenship or Greencard required
Driving Business Results through Test Engineering
V I Engineering, Inc. has a vision for every client we engage. That vision is to achieve on-time and on-budget program launch more efficiently that the competition. To realize this vision, customers need to achieve predictable test systems development, eliminate waste in test information management, and drive increased leverage of test assets. An underlying requirement for all of these areas is metrics tracking and measurement based decision making.
Job Description
Ready to make a difference? Bring your experiences and skills to the industry leading test organization. Help us to continue to shape the way the world views test. We are seeking a talented Systems Engineer to be responsible for technical execution of successful projects in the Medical, Military, Transportation, Consumer Electronics and Aerospace Industries. The position will have high visibility to customers and vendors. This is a very fast paced team with close customer contact and strong career development opportunities. A large part of the position is to identify, own and drive technical design and development of test systems. You will work alongside other like-minded and equally talented engineers, and be creative in a fast-paced and flexible environment that encourages you to think outside the box.
Required
5+ years of Systems Integration experience
Experience in Design and Implementation of Test Systems, including integration
Experience in ATE usage and development
Experience in reviewing of Mechanical Fixtures
Experience in understanding the design of Circuit Boards as they relate to a total system
Experience in Taking Part in Technical Teams throughout All Phases of Project Lifecycle
Experience in Interfacing with Sub-vendors and Customers
Ability to Multitask
Comfortable Working on Various Team Sizes
Excellent Communication Skills
Desired
Requirements generation and review experience
National Instruments Hardware knowledge
LabVIEW/TestStand experience
Experience with Source Code Control (SCC)
Experience executing verification and validation for projects
Experience generating and/or reviewing cost proposals
RF Technology (DAQ, General RF Theory)
FPGA (with LabVIEW)
Professional software engineering processes and metrics experience (statement coverage, code size, reuse measurement, etc)
TortoiseSVN
V I Package Manager (VIPM)
UML
Experience with Projects for Regulated Industries
MS Project
Formal Education
Technical degree (BS Engineering, Computer Science, Physics, Math)
National Instruments Courses a plus
National Instruments certification a plus
Notes:
Expected Travel Time is up to 25%Re
location assistance is possible.
V I Engineering, Inc. offers incredible opportunities to grow and advance your career, a dynamic work environment and the flexibility of a small company.
The Test Software and Integration Group values innovation, out-of-the-box thinking, high-tech toys and a fun / amazingly collaborative working environment. We're a National Instruments Select Integrator, and we're the closest you can get to playing with all the pre-released and new NI toys without joining the NI R&D team - and we get to play with them in the real world.
To apply for this position, email a cover letter and resume to [email protected] with the subject "TSIG Systems Engineer employment application".
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

Edit
Jeff

Hi, I downloaded Yosemite this evening. I downloaded o.k., it installed o.k. and then it restarted the Macbook and now it seems frozen. There is nothing but a grey screen, the apple logo and a bar that is half black

Hi, I downloaded Yosemite this evening. It downloaded fine, it installed fine and then it restarted the Macbook. Now it seems to be frozen. I have nothing but a grey screen with the apple logo and a bar that is half black and half grey. It's been like this for over an hour. Should I worry or is it still working at something? How do I fix this if it's not still working at installing something. Thank goodness for this poor old pc as backup.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

How to clear the open items and parked items for customer

Hi Experts,
I need to clear the open items and parked items for customer.
So any one could let me know the transaction code and procedure for clearing the items for customer.
Best regards,
Kesava balaji.

Hello,
Parked items will have NO RELEVANCE, unless you post it.
You CANNOT clear parked items.
You can clear the posted items using F.13 or F-32
Regards,
Ravi

I try to access the itunes store and my bar goes halfway and stop. Please help

I am trying to access the Itunes Store and my bar goes halfway and stop.
Please help.

Is it endlessly saying "Accessing iTunes Store"? Or is something a bit different going on?

I restarted my computer and it went to the screen withy the Apple logo and processing bar and it loaded half way but has been stuck there for a few hours now, and I don't know what to do?

I restated my computer and the apple logo and processing bar came up and it loaded half way then stopped and has been sruck like that for a few hours and I don't know how to fix it? I really need to use my computer because I have a big test and all my information is on there

OS X 10.9 Mavericks/ 10.10 Yosemite
1. Repair Disk http://support.apple.com/kb/PH5836
2. Reset PRAM: http://support.apple.com/kb/PH14222
Best.

HT203175 i-pod touch screen is frozen with the apple logo and a bar under it

i-pod screen is frozen with the apple logo and a bar under it

If your phone has been modified this will not necessary help...
Unable to Update or Restore
http://support.apple.com/kb/HT1808

HT4623 My iphone is frozen with the apple icon and progress bar at 5% cannot update

My iphone4 is frozen with the apple icon and progress bar at 5% cannot update

Same issues here.
iPhone 5 was fine until I restarted the device... now the screen flickers on and off (with the white Apple logo
and frozen progress bar overlayed on the screen).
When I try to restore, I get a "-1" error.
Well I just looked over at the screen, and everything is now fine. No flickering, no logo... the screen looks normal.
Hmmm...

I updated to ios 5.1, after updating, now my screen is stuck with the apple logo and status bar and isn't doing anything....HELP

I updated to ios 5.1, after updating, now my screen is stuck with the apple logo and status bar and isn't doing anything....HELP

The typical fix if the progress bar totally freezes - meaning no movement at all for more than 20 minutes - and iTunes will no recognize the device - is to try to put the iPad into recovery mode. That is explained here.
iPad: Unable to update or restore
However, don't jump the gun. Keep an eye on the progress bar and if it is moving at all - even very slowly - let it go for a while. I'm updating my iPod touch first and the progress bar is moving but very slowly.

My iphone 3g got stuck with the apple logo and loading bar since last night when i try to reset the iphone pls help thanks!

My iphone 3g got stuck with the apple logo and loading bar since last night when i try to reset the iphone pls help thanks!

Can you reset the phone by holding the on/off switch and home button down until your phone reboots and the Apple logo again displays?

Disappearing Legend Labels in Chart DataWebBean

Hi all,
I've used a Chart DataWebBean in a JSP page and have a problem with labels that simply don't show in the Legend Area of the chart. Can anyone tell me how to fix this?
Thank you in advance.

Hi,
Sorry for the late reply but I had some problems with my OTN login and then another project also occupied some of my time, thanks for your reply and I will appreciate it if you can help.
(1) JDev version: 9.0.2
(2) Code, theres quite a bit but i've choped out some of the html formatting stuff:
<%@ taglib uri="/webapp/DataTags.tld" prefix="jbo" %>
<%@ page contentType="text/html;charset=windows-1252"%>
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=windows-1252
import javax.sql.RowSet;
import javax.sql.DataSource;
import java.awt.Rectangle;
import java.awt.Rectangle;">
<% response.setHeader("Cache-Control","no-cache");
response.setHeader("Pragma","no-cache");
response.setDateHeader ("Expires", 0); %>
<TITLE>International Benchmarking System - Graph</TITLE>
<LINK href="incl/ibproject.css" rel="stylesheet" type="text/css">
</HEAD>
<BODY leftmargin="0" topmargin="0" marginwidth="0" marginheight="0">
<TABLE width="764" border="0" cellpadding="0" cellspacing="0" class="holderTable">
<TR>

<TD width="636" align="center" valign="top">
<jbo:ApplicationModule id="IBSbc4jModule" configname="za.org.saawu.ibs.bc4j.IBSbc4jModule.IBSbc4jModuleLocal" releasemode="Stateful"/>
<jbo:DataSource id="srcOutput" appid="IBSbc4jModule" viewobject="OutputView"/><%
Integer nKpi = new Integer(srcOutput.getRowSet().first().getAttribute("Kpi").toString());
String strQuery = new String("KPI='" + nKpi + "'"); %>
<jbo:DataSource id="srcKpiLookup" whereclause="<%=strQuery%>" appid="IBSbc4jModule" viewobject="KpiLookupView"/><%
// String strCurrency = session.getAttribute("currency").toString();
strQuery = "CURRENCY='" + session.getAttribute("currency").toString() + "'"; %>
<jbo:DataSource id="srcExchange" whereclause="<%=strQuery%>" appid="IBSbc4jModule" viewobject="ExchangeView"/>
<jbo:DataWebBean id="graphOutput" datasource="srcOutput" wbclass="oracle.jbo.html.databeans.ChartRenderer" />
<%
String strTitle = new String(srcKpiLookup.getRowSet().first().getAttribute("Formula").toString());
// String strTitle = request.getParameter("info").toString();
String strYTitle = new String(srcKpiLookup.getRowSet().first().getAttribute("Units").toString());
java.awt.Rectangle recSize = new java.awt.Rectangle();
// -- Pre-processing --
if(srcKpiLookup.getRowSet().first().getAttribute("Currency")!=null) {
if(srcKpiLookup.getRowSet().first().getAttribute("Currency").toString().compareToIgnoreCase("y")==0) {
String strHolder = new String();
if(nKpi.intValue()>=203 && nKpi.intValue()<=208) {
strHolder=strYTitle.substring(strYTitle.indexOf(" ")>-1?strYTitle.indexOf(" "):0);
strYTitle=srcExchange.getRowSet().first().getAttribute("Hundredths").toString()+strHolder;
} else {
strHolder=strYTitle.substring(strYTitle.indexOf("(")>-1?strYTitle.indexOf("("):0);
strYTitle=srcExchange.getRowSet().first().getAttribute("Description")+" "+strHolder;
} // if/else nKpi
} // if currency
} // if the currency field is not null
// -- Graph types --
graphOutput.setCommonScriptName("chart_common.jsp");
graphOutput.getChart().setGraphType(graphOutput.VERTICAL_CLUSTERED_BARS);
graphOutput.getChart().setDepthRadius(0);
// -- Series and data --
graphOutput.setSeriesLabelColumnName("Wb");
graphOutput.setDisplayAttributes("Hist3,Hist2,Hist1,Actual,Budget,Target");
// -- Legend area --
recSize=graphOutput.getChart().getLegendRect();
recSize.height+=2000;
graphOutput.getChart().setLegendRect(recSize,true);
// graphOutput.getChart().setLegendTextAutofit(true);
graphOutput.getChart().setLegendMarkersPerRow(2);
// graphOutput.getChart().setLegendOrient(2);
graphOutput.getChart().setLegendMarkerPosition(0);
graphOutput.getChart().setLegendDisplay(true);
// -- Graph Title --
graphOutput.getChart().setTitleAutofit(true);
graphOutput.getChart().setTitleString(strTitle);
graphOutput.getChart().setSubtitleDisplay(false);
graphOutput.getChart().setFootnoteDisplay(false);
// -- Graph Y1 Title --
graphOutput.getChart().setY1TitleDisplay(true);
graphOutput.getChart().setY1TitleString(strYTitle);
// -- Graph Image --
graphOutput.setImageWidth(700);
// -- Graph Renderer --
          graphOutput.render();
     %>
</TD>
          </TR>
     </TABLE>
</TD>
     </TR>
     <TR>
     <TD height="34" align="center" valign="middle" background="images/footer_bg.gif"> </TD>
     </TR>
</TABLE>
</BODY>
</HTML><jbo:ReleasePageResources />

Formatting the legend of a stacked bar chart

Hi,
Is it possible to change/edit the legend part of a stacked bar chart right now I am getting the legend as"
[Color Code1]                   Sum of [TableName].Column Name1
[Color Code2]                   Sum of [Table Name].Column Name2
[Color Code3]                   Sum of [Table Name].Column Name3
etc...
and I would like this to be displayed as
[Color Code1]                   Column Name1
[Color Code2]                   Column Name2
[Color Code3]                   Column Name3
Thanks,
ii xi
Edited by: ii.xii on Jan 9, 2012 4:47 PM

Well, the only way to edit that is to select the Legend entry (In Preview Mode Only) > Right-click > Edit Axis Label.
You would need to do this for every Legend entry.
-Abhilash

Is there a way to display the legend for a chart, but not the chart?

Hi,
I have a stacked column chart and a line chart on top of each other. I can't use the legend for the stacked column chart because the data will change from month to month, and the 2 charts will not be aligned. I copied the stacked column chart to another part of the canvas and want to display only the legend, but the chart is still displaying. Is there a way to prevent the chart from displaying? Thanks.

hi Jim Wojewnik,
we can show only the legend in a pie chart by dragging the edges to closer.do the following,
select the pie chart,select the edge of the chart and make it small and u ll find the pie chart shrinking.make it lean such that the pie chart disappear.
try this work around and let me know.
regards,
ravi.

Crys Reports - Mark the Legend Labels and Chart bar - values custom names

Similar Messages

Maybe you are looking for