Crysis Warhead 64-bit Won't Work with Windows 7 64-bit Under Boot Camp

Hi. I installed the patch 1.1 for Crysis Warhead which has the 64-bit version of the game which I'm running under Windows 7 64-bit on Boot Camp and I've tried the the compatibility mode (Vista to Vista SP2). I've also updated the ATI drivers as well as the Boot Camp drivers. I'm using the latest Snow Leopard.
When I click on the game's application (64-bit version), it would launch then it goes black with just the mouse cursor (you can move it about) which seems to be in low resolution and I guess it would crash so I would push the button on this late iMac 2009 and Windows would go back to the desktop then shutdown.
Has anyone made Crysis Warhead 64-bit work with Boot Camp Win7 64-bit with this iMac (it has the ATI 4850)? Is this because it's Boot Camp or that it's Windows 64-bit or is it the ATI graphics chip? Thank you in advance. Gbu.
Message was edited by: Alvin777

since bootcamp allows windows to run natively, it's not an imac issue, but rather an issue with your windows, so you probably get better answers in a windows forum or the crysis forums.
in any case, installing newer ATI drivers (ati.com) might help, but it's just a wild guess

Similar Messages

Ipod Touch STILL won't work with Windows 64-bit

Argh!
So, I've read the entries about the new Itunes 7.6, and how it should work with my Ipod Touch.
I uninstalled all my previous Itunes, and Quicktime software. I then installed the new Itunes64.exe. Everything worked fine.
But then, I connected by Itouch and it says "This Ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, the install the 64-bit version of Itunes."
I'm confused what the problem is. I just DID that!?! What do I need to do differently? Anyone have an idea?
Thanks in advance!

Hi,
I’ve got the new version of Itunes (7.6.1) but I still get the error where it tells me to download and install a 64-bit version of Itunes. This is just ridiculous!!! I bought my IPOD touch before Christmas and i still haven’t been able to use it!
I've uninstalled and installed itunes and all that rubbish about 5-6 times now, i've deleted everything to do with Apple from my machine and also nearly killed my machine because i messed around with the registry (that's my fault :P)
NOTE: I used IE 64-bit version to download the installer.
Anyone have a solution to the problem?

TS1363 "An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

"An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

Hi cueball819,
Thanks for using Apple Support Communities. This article has steps to try if your iPods aren't recognized by iTunes or Windows:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Cheers,
- Ari

Problems with Windows XP SP3 in Boot Camp

Hi,
I have recently received a 21.5" iMac; it is the higher-end of the 21.5" standard configurations. The problems I am having, I believe, specifically relate to drivers.
Firstly, I get no sound whatsoever in Windows XP SP3 (boot camp); I have tried removing and reinstalling the drivers from the Snow Leopard install disc, but no success. I have no yellow question marks in the device manager window, but the absence of audio still persists.
Secondly, I cannot gain access to the special functions of the Apple wireless keyboard in Windows XP SP3 via Boot Camp. Again, I have tried reinstalling the drivers, but no success. I have read an Apple support document which states that the keys are only supported on late 2009 Macs; I own one of these Macs, so that cannot be the problem.

Problems with Windows XP SP3 in Boot Camp
Boot Camp forums are here: http://discussions.apple.com/category.jspa?categoryID=237

HP Officejet 6500A Plus won't work with Windows 10

Help!! Officejet 6500Aplus won't print with windows 10. Every aplication just spits out blank pages when you print.

I have the same issue with my OJ 6500 (network connected). And I've been just been sent on a wild goose chase to install the support assistant - which didn't actually resolve my issue. When I go directly to the drivers, it recognizes my OS as Windows 10, but doesn't give me a matching driver package to download... How/when will this be resolved? Does anyone have a workaround?If I knew that my printer/scanner doesn't work anymore I certainly wouldn't have upgraded to Windows 10. Win 8.1 wasn't perfect, but at least everything worked... Thanks for any suggestions!

HP LaserJet 6L won't work with Windows 8

Good afternoon all,
Right I inherited this great little printer last year, it worked great with Windows 7 but now it wont work with Windows 8, it appears to be installed and the drivers are all up to date but when I use it to print a pile of random characters come out on the pages and doesn't stop. I've reinstalled it and installed it again and again every different way but it just doesn't work and HP says that it is compatible (there is a green tick beside it somewhere on your website). Could it be that I'm using a cable that is parallel at the printer end and USB at the computer end that is at fault?
James.

I had the same problem, and fixed it.
Control Panel - Devices and Printers
Click on "Add a Printer"
Click on "The printer that I want isn't listed"
For USB connection, choose "Add a local printer or network printer with manual settings"
Pick an existing port. I use a cable that has LPT port at one end, USB at the other end. So my choice is USB001 (Virtual printer port for USB)
Now you see the list of manufacturers and models. Before doing anything, click on "Windows Update" and let it run (takes a few minutes)
Once the update is complete and you're back to the list of manufacturers and models, select HP as the model, and select HP LaserJet 6L as the printer. Without Windows Update, it will only show "HP LaserJet 6L PS Class Driver", which causes the problem. Stick to "HP LaserJet 6L"
The rest is straight forward. Print a test page and check if it comes out right. Good luck!!

Adobe 6.0 won't work with windows 98

I bought 6.0 without reading the fine print. When I tried to install it, I found out that I need Windows 2000 or higher. I can't upgrade to windows 2000 due to conflicts with other programs I'm running. Does anyone have any ideas on how to make 6.0 work with WIndows 98, or how to get an older version of Adobe?
Thanks!

This forum is for questions or comments related to Installshield Tuner
for Adobe Acrobat, remote installations of Acrobat via SMS or Tivoli,
or the hosting of Acrobat products via Windows Terminal Services or
Citrix MetaFrame XP.
Note: Questions pertaining to the individual installation, use or
features of Adobe Reader or Acrobat should be posted within the
specific forum for the product you are using
Aandi Inston

Itunes won't work with windows 8

Itunes doesn't work with windows 8 after I install it.

See Install & Update here > http://www.apple.com/support/itunes/install/
Also see Downloading Content in the same link.

Problems with Windows install and erasing Boot camp partition.

I recently decided I'd try running a copy of XP on my Macbook, the only reason being that the software for my OU work is only available on Windows. I used Boot camp assistant to partition my hard drive which went smoothly. When I tried to install Windows, I get to the Windows install screen, and it says "Press enter to begin installation". Unfortunately, my keyboard doesn't seem to work, so obviously I can't begin the installation. I've tried using my old Apple USD keyboard, but it didn't make any difference. I thought I'd try the whole process from scratch, but found I can't erase the original partition. I've read that you should use Boot camp assistant again, but when I press the continue key, I get the message:
"The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows."
Does anybody know a way of sorting either of these problems out? Much appreciated.

I've been doing a bit more reading into the problem. I think the keyboard problem's because I'm not using the SP2 version on XP. So hopefully once I get a copy, I should be able to sort it. But I still can't seem to use BCA to erase the partition.

Basic host scan (CSD) won't work with Win7 (64-Bit)

Hi all,
We got a customer with an ASA5510, Cisco Secure Desktop (3.6.5005) and Host Scan Engine 3.0.07042 for SSL Web-VPN.
There are some basic host scan checks, like windows process names / AV during login.
On the endpoints with Windows 7 (32-Bit) and Windows XP, the "debug dap trace" shows, that the host scan recognize the status of the process.
On Windows 7 (64-bit) unfortunately not. The AV check is working properly.
Is there an issue with 64-Bit?
Any ideas?
Thanks,
Norbert

since bootcamp allows windows to run natively, it's not an imac issue, but rather an issue with your windows, so you probably get better answers in a windows forum or the crysis forums.
in any case, installing newer ATI drivers (ati.com) might help, but it's just a wild guess

New Computer with VISTA 64 bit won't work with Palm OS on TX - no bluetooth

I bought a new computer without researching the 64-bit vs 32 bit Vista versions and didn't discover until I had it up and running that I can't install the Palm Desktop on it. My TX is only a couple of months old. I don't want to replace it and can't get a bluetooth adapter right now, budgetwise. What I want to know is: 1. Is ther some other work around than the clunky bluetooth one? and 2. Is Palm working on a 64-bit compatible version?
Post relates to: Palm TX
This question was solved.
View Solution.

ebullister:
Before firing off an embarrassing rant, how about searching this forum for an answer first?
You are asking about Palm Desktop, and the ability to perform a HotSync. You have replied to a post that is over three years old. We have a section of the Forum devoted to Windows HotSync named as such.
In this section, you will find a post entitled "64bit Palm Desktop drivers are here". USB drivers have been around since April of 2011. Please read through this post since it provides an answer to your issue.
Palm Inc. sold the rights to Palm Desktop many years ago to PalmSource, who then sold it to a Japanese company named Access. They were the company who you so eloquently described as the one to "screw users".
BTW, Palm Inc. ceased to exist some time ago since being purchased by HP. Posting a complaint against a company that exists only in memory seems a bit pointless, no?
Hopefully my reply can bring you up to speed, and enable you to sync your device.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

I ran the update and then firefox stopped working completely ggot a message about .dll that won't work with windows. tried toreinstall new copy of latest but they won't.

I just ran the update to .4 as the dialog box said to. Now firefox won't work at all. Nothing happens I get a message about a .dll file that is incompatible. Tried to doanload a new copy but that doesn't get any further starting to extract files then it fails to finish. Any thing I can do or have I lost evrery thing including my bookmarked sites?
== This happened ==
Every time Firefox opened
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SIMBAR={7B37EC33-AF75-48D2-9930-4E9EF2ABA545}; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729)

Thank you,
Morbus! It worked like you said. Anyway I think the problem starts with maybe needing to completely clean up my OS and drives as they keep "filling up" real fast - much faster than my usage. Uninstall wouldn't work so I just oened up programs and fond the .exe and then deleted it. Scary moment as I really have seen others so mess up everything doing this but download went well of new copy and yes I have all my bookmarks and settings. YAYS!! so thank you again. Also running so much faster and no glitches like tabs not working th way they should. In end I think I need to get an upgrade from Vista home basic. and just then add my files one at a time to see how all goes.

HP Officejet 6500A won't work with Windows 10

I just upgraded to Windows 10 from Windows 7 on my HP Pavilion and now my HP Officejet 6500A printer won't work. Do you have any updates to solve this issue?Thanks.

I have the same issue with my OJ 6500 (network connected). And I've been just been sent on a wild goose chase to install the support assistant - which didn't actually resolve my issue. When I go directly to the drivers, it recognizes my OS as Windows 10, but doesn't give me a matching driver package to download... How/when will this be resolved? Does anyone have a workaround?If I knew that my printer/scanner doesn't work anymore I certainly wouldn't have upgraded to Windows 10. Win 8.1 wasn't perfect, but at least everything worked... Thanks for any suggestions!

Setup.exe from Boot Camp won't work with Windows Xp Home SP2

Hi,
I just bought the great MacBook Pro. So I work over years in Windows it's absolutliy necessary to migrate my old System to MacBook. I succeeded in cloning my old installation completly to the MacBook and Windows is activated. when I start windows, of course no MacBook drivers are installed, so I have only a minimum of functionality. Now I want to start the BootCamp to install the drivers. But if I start "Setup.exe" it's ending immediately with: There were errors... before Boot camp could be initialized.
I downloaded the newest BootCamp (3.1) and start it, the program crashes!
I can't get it working!!! What have I to do - please help me!
I use Windows XP Home SP2.
Thanks!

If you didn't try installing Boot Camp from your OS X disc, try that first.
From what you wrote it sounds like you somehow cloned your old install of windows over to a fresh partition. Depending on how you did this, the problem might lie here.
First, what version of OSX are you running?
If your MacBook Pro is new, it should come with Snow Leopard, which wouldn't explain the problem.
How exactly did you clone windows over?
Depending on how you cloned windows, your easiest solution might be to back up any files and applications you need from windows, remove the current Windows partition, and create a new partition and installation of Windows through Boot Camp on OSX. Normally Boot Camp should install its drivers after a successful installation of Windows.

HP Laserjet P1006 won't work with Windows 8.1

I have an HP Laserjet P1006 which I installed on my new Windows 8 laptop. Everything was working fine. I did an update last night to 8.1. The printer no longer works. I went to the website and downloaded the latest driver which said it would work with 8.1. After it was installed the printer still would not work. When I go to the control panel and see the printer it still tells me no driver is found. HELP
This question was solved.
View Solution.

Hello
I understand you are no longer able to print with the P1006 on Win8.1.
Did you uninstall the P1006 first?
If not uninstall and reinstall the printer software again.
Both drivers are the same if you look at the version on the website and should still work with the Win8.1.
If you need more assistance just let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Crysis Warhead 64-bit Won't Work with Windows 7 64-bit Under Boot Camp

Similar Messages

Maybe you are looking for